How to make modal page to be auto size regarding content in the page?

Hi, guys:
I created a modal page (Dan Mcghan's modal page plugin from skillbuilder web site), which pops up when user clicks the master table to see drill down data. However, some rows in the modal page have too many characters, and modal page cannot hold it, so user cannot see the next page with page set pagination, the page set pagination is just out of the scope of modal page. Could anyone give me a suggestion to set modal page auto size adjustable regarding content in the page?
Thanks a lot in advance.
Sam

Hi,
You can enable "Scrolling" for the modal window under Shared Components -> Component Settings. In the DA that triggers the modal, you can set the "Dialog Height/Width Mode" to Auto.
BTW, what is the region template of the modal region (in the target page)?
If your issue is still not resolved, please setup an example in apex.oracle.com and I can have a look.
Thanks,
Rohit

Similar Messages

Somehow, my Referer Header got set to zero, and I'm trying to set it back to 1 or 2, but I don't know how to make it stay like that. Every time I refresh the page, it goes back to zero! Please help!

Somehow, my Referer Header settings got set to 0 (zero). Because of this, I'm getting an error message on certain sites. I found out that I could reset it to 1 (one) or 2 (two) if I browsed to about:config and typed in the new value, but it doesn't seem to be working. I'm not sure how to "save" this setting, and ever time I refresh the about:config page the setting goes back to zero. Plus, I'm still getting the error messages on the sites I was having trouble with.

You need to connect the iPod to your computer with iTunes and then restore the iPod via iTunes on the computer.
Also see:
http://www.apple.com/support/ipodtouch/getstarted/

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

How do I stop Firefox from playing video after I navigate from the page or leave Firefox?

Simple and annoying. . Extremely frustrating issue with Firefox for Android. ..
I watch a YouTube video or any flash video. . And after I hit play, the ONLY way to stop it is to hit pause or let it play to the end or close the tab. .
It will NOT automatically stop if I open another tab. or if I navigate from Firefox. .
I feel this is a very basic feature. Did I set something up that was wrong?
Can I ask two questions?
I have another extremely annoying and frustrating problem with Firefox for Android.
The "top" (if you pull down the tabs) search bar DOES NOT allow my stock Samsung keyboard to auto space. . Thus instead of typing
"How do I stop Firefox from playing video after I navigate from the page or leave Firefox?"
I'll type in
"HowdoIstopFirefoxfromplayingvideoafterInavigatefromthepageorleaveFirefox?"
Unless I manually got the space bar.
Using a recently factory data reset Samsung Galaxy s4 active.. android 4.2.2 and stock Samsung keyboard ... Firefox 34.0.1
Thanks in advanced.
Ps
I was a hardcore xscope user for years and just recently gave in to Firefox when i lost all my bookmarks due to a forced factory data reset. .

I'm using a different keyboard which works fine in the most top search bar...
I cannot believe that it's not a feature.
What if I was watching a video and wanted to shut it off quickly? I'll have to hit back? Wait for the previous screen to load then hit the power button?
Please tell me that feature ids soon to come

How can i optimize my SEARCH ENGINE???I use godaddy.i contact them and they give me this conclusion:Search engines are not pulling up your other pages on your website because it is created with javascript. the content on the pages, (photo gallery.....

conclusion from godaddy:
Search engines are not pulling up your other pages on your website because it is created with javascript.
the content on the pages, (photo gallery, My Recipes/Blog, History, Friends) need to be formatted to HTML, PHP or CSS. No search engines (google, Yahoo, Bing) can crawl//analyze webpages built with javascript.
See if Apple allows iweb to create the pages in HTML format and ask how to make those changes.
I spend more then 1 hour on the phone with them but we didn't find the solution...
please i need help because like this nobody can rich my website...
www.chefdiego.com
thank you

The part of iWeb pages that give the search engines problem is the navbar. That's javascript based. One way to get around that is to create another blank page in the site that's not included in the navbar.
Add a text based navbar in that page with just the other pages in the site.
Also you can use that page for creating the sitemap for Google at Create your Google Sitemap Online - XML Sitemaps Generator.
Have you let Google know your site exists? This website describes how to get it recognized: Get your iWeb website found in search engines like Google Yahoo MSN and Bing.
OT

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

How can I open a new page (using "Pages") when I already have another page open? It just keeps reverting to the page I have opened already and won't let me open another one?

To make a new document, go to File > New From Template chooser and choose the type of document you wish to create.
To add a new page to an existing document go to Insert > Sections > Blank.

How to make a copy of a legal size document on HP Officejet Pro 8600

How to make a copy of a legal size doucment on HP Officejet Pro 8600 e-All-in-One?

Hi,
Please try
(a) Load legal size papers onto the input tray (you have to extent the tray from the blue/cyan part to fit legal size papers),
(b) Load original face up on the ADF,
(b) Touch copy,
(e) Touch Settings (now you can change size and few other options,
(f) Touch Black or Colors to copy.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How to make a text field smaller in size

Can I make a text field smaller in size (not just the length
but also the height) depending on the font size eg 10px. Whatever
font size I seem to use the text field stays the same size.

Can you give an explicit example of what you want? Are you
referring to the
font size that someone sets in the browser, or the size you
set in the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"~Billy~" <[email protected]> wrote in
message
news:fa3oh4$67u$[email protected]..
> Can I make a text field smaller in size (not just the
length but also the
> height) depending on the font size eg 10px. Whatever
font size I seem to
> use the text field stays the same size.

Hi, Over a week now, my Firefox browser has been aligning the info on the page to the right of the page. This makes it difficult to see the rest of the contents on the page. Can you help?

Question
Hi, Over a week now, my Firefox browser has been aligning the info on the page to the right of the page. This makes it difficult to see the rest of the contents on the page. Can you help?
Regards
Femworth65

my money is on a hardware issue

If I am using pages and deleted my page bu mistake how do I go back? I have not saved or deleted the page.

If I am using pages and deleted my page by mistake how do I go back? I have not saved or deleted the page.

You have deleted your page, but you have not deleted your page?
Which is it?
If you never saved it it is gone. If you saved it in Lion (OSX 10.7) with Pages 09 v4.1, there should be versions available when you mouse overv the document name at the top of the window.
Peter

Hi, I am trying to download IOS7 to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hello Den53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430?viewlocale=en_US
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
Best of luck,
Mario

Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

Let's say I have a document that is 5 pages long. Now I want to insert the page numbers, starting on page 3 with the number "3" and leaving out pages 1 and 2. How do I do that?

I just found the answer myself. I don't know how to delete my question, so I'll just write the reply to the answer - just in case somebody needs to know: Insert a section brake after the second page and then choose "Start on 3".

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Mailto link to send the content of the page when clicked.

I want to set up a mailto link that sends the contents of the page to a predefined address when clicked. I want this to work from a webpage viewed on an iPad as well as a desktop computer. If this is possible, how do I do it?

You cannot, but you may be able to send the link to an address, just not the webpage content itself.

How to make modal page to be auto size regarding content in the page?

Similar Messages

Maybe you are looking for