How to make mouse button mute sound?

The Apple mouse has a button on the top that I would like to use to Mute the sound. I can program a Logitech mouse to do it with Logitech drivers, but I don't know how hard it would be to get an Apple mouse to do it. I looked around for scripts/hacks... How could I make a mighty mouse Mute the system? I know there is a button on the keyboard if I could just tell the mouse button to mimic it.
Thanks...
Rosco

There is an option to do this if you install the program "USB Overdrive", which allows you to customize the buttons on your mouse.
http://www.usboverdrive.com/

Similar Messages

  • How to make the buttons INVISIBLE in the Application toolbar

    Hi All,
    I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
    Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
    I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
    or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
    Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
    Thank you in advance.
    Regards.
    Paddu.

    Hi,
    Try to use below in the PBO module status_0100 OUTPUT.
    DATA t_fcode TYPE TABLE OF sy-ucomm.
    refresh t_fcode[].
    APPEND 'Function code name of the button' TO t_fcode. 
    Check the condition here for which you want to make field visible.
        DELETE FCODE of the button from T_FCODE table
      ENDIF.
      SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • How to make a Button to work Actively even if there is a mandatory field..?

    Hi All..
    How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
    I am badly in need of this logic, as i have to incorporate in my code..
    Points will be rewarded without fail..

    Hi Pavan,
    I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:  s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
    SELECT-OPTIONS:  s_panid FOR zoindex_val-zopanid.
    SELECT-OPTIONS:  s_effdat FOR zoexchrate-zedate.
    SELECTION-SCREEN END OF BLOCK b2.
    *-- AT SELECTION-SCREEN
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
    *-- Obligatory Country Code
      IF s_land1[] IS INITIAL.
        MESSAGE e050 WITH text-050.
                     "Please select the Country Code
      ENDIF.
    So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
    Hope this would help u in some way. Please do reward the helpful answers.

  • How to make "Utility" button in Printer Setup Utility available

    There, i add a printer in the Printer Setup Utility and select it. i want to open printer utility, but the "Utility"
    button in Printer Setup Utility is dimmed. In addition,
    "Printer\Configure printer" in the Printer Setup Utility menu is also dimmed.
    How to make "Utility" button in Printer Setup Utility available?
    Thanks in advance.

    Hi Jiong,
    That button is to acess the printer utility for that particular printer, not all printers come with a utility. If you have the disk that came with your printer, you can see if it has a Macintosh driver, if it does then it mimght have the utility with it. It's pretty hard to run the utility on its own, its burried somewhere in the system so that's why you have that menu item. You can alternatively go on the internet and download the latest driver, which might have a utility. All the utility will do will give you options to check nozzle patterns, alighnement, ink tank levels, and cleaning options - just mimnor maintenence junk, non-essentials, etc. I think Tiger just comes with a whole heap of generic drivers for different printer lines, can't say for sure.
    I wouldn't worry about it, especially if you have a relatively old printer.
    Hope that helps
    DKR

  • How to make a button load a sprite from library??

    PLEASE HELP!!
    Hey everyone.. iv been looking for help for a few weeks but cant seem to find the awnsers
    I am trying to create a newspaper that consists of four pages. Each   page i have created and are sitting in the library as sprites. Each page   has buttons that need linking so that when pressed it loads the next   page or page that i want. This is the part i am confused with =/ how do i   make the buttons on each page load the next page (sprite) from the   library??
    Basically i want to no how to make a button load a sprite from the library when clicked. Does anyone no the script for this?
    Thanks for any help

    A question arises as to whether or not you are posting in the right forum.  Sprites are AS3 objects.
    If you want to add movieclips to the stage from the library using AS2, then you need to assign them each an Identifier via right clicking them in the library and selecting the Linkage option... from there you slect the option to Export for Actionscript and then assign the Identifier.
    You then use the attachMovie() method to make use of that Identifier to dynamically load the library object.

  • HOW TO MAKE ROUND BUTTON

    HI PLS TELL ME HOW TO MAKE ROUND BUTTON ON FORM.

    Rounded end buttons (e.g. Oracle Look and feel) are do-able in both 6i and 9i using PJCs in the 9i demos see the rollover button example, in 6i I seem to remember that there is a RoundedButton sample in the demos.
    Both sets of demos can be downloaded from http://otn.oracle.com/products/forms.
    If you want circular buttons then you'd have to use an Image for that.

  • N73 how to make the camera MUTE (no click sound)??...

    I want to know how to make the camera without any sound during taking the picture in NOKIA N73 music edition.
    please tell me as soon as possible
    Thank u

    Typical for discussion forum, the experts to give usless advice( ie "try silent mode") folowed by " its a privacy issue".
    I am unable to mute the camera on my E71.  I also assumed it was a legal issue.  Recently a friend of mine, showed me the Iphone 3Gs take a picture silently.  Silent photography with a cell phone is possible.
    This looks like something for a symbian upgrade or even a third party camera app.
    Send your camera upgrade request to Nokia, cross your fingers.

  • How to make a button stay down when I click on it in  CSS nav bar.

    So I have created a horizontal navigation bar, I use the CSS
    Sprites/Pixy method to get the hover working with the same image as
    the link/in active stage of the buttons.
    Now how do I make the button stay down when someone click on
    them?
    These are the codes for the nav bar.
    #nav{
    width: 780px;
    list-style: none;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    padding: 0;
    height: 40px;
    #nav li{
    font-family: Arial, Helvetica, sans-serif;
    font-size: 14px;
    font-weight: bold;
    float: left;
    padding: 0;
    #nav a{
    width: 125px;
    display: block;
    color: #000000;
    text-decoration: none;
    text-align: center;
    background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    background-repeat: no-repeat;
    background-position: center 2px;
    padding-top: 14px;
    padding-bottom: 10px;
    background-color: #000000;
    #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    #nav a:hover{
    background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    background-repeat: no-repeat;
    background-position: center -36px;
    color: #FFFFFF;
    width: 125px;
    padding-top: 14px;
    padding-bottom: 10px;
    background-color: #000000;
    Everything works so far, the hover works when you roll the
    mouse but when you click the button goes right back.
    How can I make it stay down and then go back to normal when
    you click on another link/button?
    Thanks very much.
    Patrick

    Read my suggestion again. You are missing a critical point. I
    show you
    exactly where to put the stylesheet. And it doesn't matter
    how many
    stylesheets you have on a page.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Webethics" <[email protected]> wrote in
    message
    news:[email protected]...
    >
    quote:
    Originally posted by:
    Newsgroup User
    > Change this -
    >
    > #nav a{
    > width: 125px;
    > display: block;
    > color: #000000;
    > text-decoration: none;
    > text-align: center;
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center 2px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    >
    >
    > #nav a:hover{
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center -36px;
    > color: #FFFFFF;
    > width: 125px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > to this -
    >
    > #nav a{
    > width: 125px;
    > display: block;
    > color: #000000;
    > text-decoration: none;
    > text-align: center;
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center 2px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    >
    >
    > #nav a:hover{
    > background-position: center -36px;
    > color: #FFFFFF;
    > }
    >
    > Then on each individual page, change this -
    >
    > </head>
    >
    > to this -
    >
    > <style type="text/css">
    > #nav a#link4 {
    > background-position:center - 36px;
    > }
    > </style>
    > </head>
    >
    > (for link4, for example)
    >
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "Webethics" <[email protected]> wrote
    in message
    > news:[email protected]...
    > >
    quote:
    Originally posted by:
    Newsgroup User
    > > When they click on a button, do they go to another
    page? And is each
    > > button
    > > uniquely identified?
    > >
    > > If so, then put a little stylesheet on each such
    page that sets the
    > > particular button to the down sprite settings,
    e.g.,
    > >
    > > a#link6 { downspritevalues }
    > >
    > > --
    > > Murray --- ICQ 71997575
    > > Adobe Community Expert
    > >
    > >
    > > This is the link to the page.
    > >
    http://www.patrickjudson.com/zitto_web1d.html
    > > What state do I use to get this effect? The active
    or the visited?
    > >
    > > I want the buttons to remain down when click or
    even better, how do I
    > > get
    > > the
    > > welcome button to appear down when a person visits
    the page to show them
    > > they
    > > are at the home page.
    > >
    > > Thanks so much. Patrick
    > >
    > >
    > >
    >
    >
    >
    > Hey! Murray, thanks very much for the efforts. However
    I'm still confused
    > as
    > to where to insert the individual styles on each page.
    >
    > The pages already have a style sheet, in fact they all
    share the same
    > style
    > sheet. The following codes below is what you instructed
    but I'm confused
    > as to
    > where to insert them since the page already has a head
    opening and closing
    > as
    > well as a style opening and closing tags. Can you please
    add the codes you
    > instructed so I can see where they go and how to
    implement them?
    >
    > Thanks - Patrick
    >
    >
    > Then on each individual page, change this -
    >
    > </head>
    >
    > to this -
    >
    > <style type="text/css">
    > #nav a#link4 {
    > background-position:center - 36px;
    > }
    > </style>
    > </head>
    >
    > (for link4, for example)
    >
    >
    >
    >

  • HOW TO MAKE AUDIO SHOW THE SOUND WAVES?

    I was wondering if it was possible to show the sound waves on the audio track, whenever I plug in audio I cant seem to figure out how to make it show like it does in other programs such as Adobe Premiere? Thanks!

    Option-Command-W, if you're the keyboard type
    Otherwise, there's button right by the track height selector buttons, at the bottom left of the Timeline.

  • MacBook mouse button, horrible sound.

    Hi!
    My MacBook mouse button sounds horrible when I click it. When I first bought it, the button was smooth and silent.
    Now the button feels like it get a little stuck and makes a "clunking" sound when I push it. It's pretty annoying, especially when I expect the best when purchasing an Apple product.
    Is there any way to fix it, or should I go to the Apple Store. Would they be able to repair it?
    My warranty hasn't expired yet.
    Also, another problem I have is the screen bezel. In the middle beside the microphone and iSight, that part of the screen doesn't sit snug, If I push that part it also "clunks".

    Take to the apple store. It's under warranty. They'll take care of it.

  • How to make the  buttons same size on the toolbar

    Hi All,
    Can anyone please tell me how to make the size of buttons on the toolbar to be same .
    And i also want to add combo box at the right side of my menubar with prefered size.
    Please send me the solution if anyone knows . Thanks in advance.
    Regards,
    Shankar.

    how to make the size of buttons on the toolbar to be same Create a panel with a GridLayout. Add the buttons to the panel then add the panel to the menubar.
    add combo box at the right side of my menubar Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]How to Use Menu Bars for an example.

  • How to make picture button in oracle forms?

    can any one tell me how to make a picture button in oracle form builder?
    please help?

    Hi,
    Only a icon can be pasted on the push button. We can not user jpg,,jpeg or gif for the picture only ico file can be used.
    go to properyt pallet,
    make iconic as yes
    give the path in icon filename --- C:\Program Files\Winamp\eMusic\eMusicClient
    where eMusicClient is -- icon file name without extension, dont use " " in path
    bye

  • How to make a button appear boxed in when clicked

    For my Prototyping class I have to make an interactive fast food ordering system. I have majority of frames made I just need to add the interactive part to it. I am using AS2 in Flash CS3. I have the picture and the text grouped and are classified as a button. I want to make it so that when the picture or text is clicked it will make a black box appear around it, making it 'selected'. I've tried to add an Event Listener but couldn't figure out how to make the box appear on it. Any suggestions?
    These pictures are basically what I'm trying to accomplish.
    Keep in mind, I'm a Flash newbie, I have a probably 3 hours experience with Flash.
    But I do have knowledge of basic Java commands, so I can understand code.
    Thanks,
    Dudejoe04

    Onw way would be to create the buttons as movieclips so that when they are selected you move the movieclip's timeline to a rame that shows the rectangle around it.  Another way would be to have the movieclips as separate objects that you make appears when its associated button is clicked.  There are likelynumerous other possibilities.

  • How to make mouse click event to display image on 2D array?

    Hi! beginner programmer here looking for some guidance, hints and tips.
    I'm making a game of "Connect 4" and using a 2D array to display the board which is 7x6 in size.
    What i want to do is that when the player clicks on one of the squares, one of the 2 game pieces(red.png or yellow.png) will appear on the respective coordinates of the 2D array and check if the square in the first row is empty and if true, places/display
    the game piece, else it places the piece on the first empty square.
    Since i've never worked with WinForms or 2d arrays before i'm not sure how to initiate it.
    What i was considering in pseudocode was:
    pb_Mouseclick(object sender, MouseEventArgs e)
    if(e.Button==MouseButtons.Left)
    Picturebox pb=(Picturebox)sender;
    clickLocation.X= e.Location.X + pb.Location.X, pieceArray[row];
    clickLocation.Y=e.Location.Y + pb.Location.Y, pieceArray[col];
    if(pieceArray[row, col] == null)
    if(player1.IsStarter==true) selectedimage(@"yellow.png")
    else
    selectedimage(@"red.png")
    else {
    bool empty= false;
    for(int row=0; row<height - 1; row++)
    for(int col=0; col<width; col++)
    if(pieceArray[row, col] ==null)
    empty=true;
    (Add gamepiece)
    This is what i've come up with so far, but it's just some theorycrafting, not sure if i should use a while-loop instead...
    Hope anyone can give me some insight on how to make it work and if the logic of my pseudocode is correct for what i want according to my earlier explanation.
    Many thanks in advance!
    Regards
    Gabbelino
    Student at the University of Borås, Sweden

    Hi Gabbelino,
    I could not understand your game rule clearly, and could you make explanation for me?
    1.>> when the player clicks on one of the squares
    What were the squares? Did it like dice or anything else?
    2.>> one of the 2 game pieces(red.png or yellow.png) will appear on the respective coordinates of the 2D array
    What is the 2 game pieces? Could you show us the two pictures?
    3.>> check if the square in the first row is empty and if true, places/display the game piece, else it places the piece on the first empty square
    Could you show us where places/display the game piece?
    Best Regards,
    Tony
    Help each other

Maybe you are looking for