How to make multiple users on the start up screen

So basically I have created three users on my IMac and they are all administrators and when I restart my computer or I turn it on, only 1 user comes up... I was wondering on how to make all three show up on the startup screen?????

If you've activated FileVault, only the users that were authorized to unlock the startup volume will appear in the pre-boot authentication dialog. Once the system has booted, all users will appear in the login dialog.
The only way to authorize more users after the volume has been encrypted is to decrypt it, or to run the fdesetup(8) command in the shell.

Similar Messages

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to make all users have the same working environment?

Hi guys,
thanks for helping out on this issue.
Is there a way to set all users on your system to have the same working environment? I believe, as root you can edit the /etc/profile. But when I looked at the file, I was confused. I had no idea where to add stuff because it was a script.
Please if anyone can help me explain how to customize system wide working environments, I will be very grateful .
Thank you
Arrey

Hi.
It's not clear what you understand under system wide working environments ?
/etc/profile it's one possible solution.
Another way - put custimozed .profile to all users and use customezed */etc/skel* for new users.
Regards.

How to Modify multiple users at the same time.

Hi All,
I oversee a lab with 8 24" imacs running 10.4. Each machine has the same set of guest user accounts. The machines are not connected by a actual server, although I can dump files to a common folder. My problem is every time I want to make system pref changes I have to go into each user account to apply them, (i.e.,adding a new monitor profile). Any ideas or work-arounds out there?
Thanks
Phil

Hi Phil, and a warm welcome to the forums!
It's not clear if these are connected in anyway, but if they are, something like Timbuktu® Pro for Mac OS X, or ARD...
http://www.netopia.com/software/products/tb2/mac/
http://www.apple.com/remotedesktop/

I'm a Mac user, at the start of Adobe Lightroom I receive an error of changing modules. How can I solve the problem?

I'm a Mac user, at the start of Adobe Lightroom I receive an error of changing modules. How can I solve the problem?

Error changing modules | Lightroom
Mylenium

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WebTools Creating multiple users for the same User

I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
This is occuring for several users in webtools.
What causes this and how do I fix it?
Thanks,
Craig Spehar

Hi Craig,
There are two ways to cause this that I am aware of:
1. Change the "Business Partner Synch Contacts Field" setting after the initial synch.
2. Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
After that, update the user in WT and synch. (might also happen if you update the BP in B1)
Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed. When it does not find it, it assumes it needs to be created. This results in a duplicate.
The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
Then delete the last created duplicate contact from B1.
There may be further data corruption issues here. If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
FYI, whatever caused this was probably at the root of your order problem as well.

How to make a restart of the workflow in a process controlled workflow?

Hi Experts,
How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
Thanks and regards,
Ranjan

Hi,
Restarting workflow goes to 1st level approval step. It is not requester.
I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
Regards,
Masa

How to Add multiple entry to the group policy security filtering

How to Add multiple entry to the group policy security filtering
Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

Hi
Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
Try right clicking on the policy and then edit
Then in Editor Right click on the name of the policy and Properties
Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
the correct option also "From this Location" is set to your entire directory not the local server.
Update us with the above.
Thanks

How do you change the start-up screen

Hi, as my nick states, I'm new here. I'm new to Nokia too and I got an 2760 (I know not the latest model) as gift. Since the battery from my old phone is almost ruined, I'm using it. What baffles me - in the manual I can't find how to change the start-up screen (Nokia) or better, how to block it. This was possible with my old one, but with this one?
To make matters even more complex - it used to be a T-Mobile model (I'm no T-Mobile subscriber) and the menu differs even from the (very short) manual...
I'm lost - can anybody help?
Thanks!!
Solved!
Go to Solution.

this cant be disabled ,check out the web for latest user guide
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to make multi user drawing application

how to make multi user drawing application in as 3.0

I'd suggest using Flash Media Interactive Server if you wish to make this type of application and use Flash as the interface. I can't give you the details on exactly how to implement it, but using Remote Shared Object and FMIS would serve as the basis. I believe that the package comes with examples of Shared Objects that can serve as a simple basis from which to proceed. After that you might want to see if you can find an available whiteboard app that can be leveraged to do as you wish.
I apologize in advance if using this type of solution is a non-starter, I've been using FMIS locally and have plans to eventually implement something similar to this type of drawing app as well.

How to make every account in the system login automatically?

How to make every account in the system login automatically when Mac OS X startup?
Thanks!

I can see one way to do it. You'll need to install a script in each user account, and have it set as a login item for each user. Let's imagine you have three user accounts. Each user in Mac OS X has a UID number. Normally your first user has the UID of 501, the second one will be 502 and so on...
You can determine the UID by running the following AppleScript while logged in on each user:
do shell script ("ID")
This'll return a long block of text, but right at the start you'll see the UID number. Let's assume your three users have the UIDs 501, 502 and 503. We begin with 501.
Create the following script and save it as an application while logged in as 501. Note that the password you're entering is the password for UID 502. Also note that the forum system is creating line breaks where there shouldn't be any. The long "do shell script" line should be one line.
delay 5 --This delay allows time for login to complete, but it may not be necessary.
try
do shell script "/System/Library/CoreServices/Menu\\ Extras/User.menu/Contents/Resources/CGSession -switchToUserID 502"
delay 5 --This delay could be shorter or longer, depending on how fast your machine is.
tell application "System Events"
keystroke "password for 502" --the password for UID 502
keystroke return
delay 1
end tell
on error
display dialog "Unable to switch user."
end try
Open System Preferences, go to Accounts, click "login items" and drag your script (saved as an application) to the login items window.
You basically repeat this process for each user account, modifying the script so it switches to the next user.
This isn't ideal, because your passwords will be stored in the scripts, and each user could open the scripts and learn the passwords of the other users on that machine.
I picked some of this up from a discussion over at the Macworld forums:
http://hints.macworld.com/article.php?story=20031102031045417
Message was edited by: The Preacher
Message was edited by: The Preacher
Message was edited by: The Preacher

How to make different users to use different Plan_Tables?

How to make different users to use different Plan_Tables?
I want each user use his own's Plan_Table. How to achieve this goal?

qkc wrote:
How to make different users to use different Plan_Tables?
I want each user use his own's Plan_Table. How to achieve this goal?Which version of Oracle - if you're on 10g or later you are already (effectively) doing this.
If not, then copy the 10g strategy back to your version; in outline:
<ul>
drop all existing plan tables
create a table (but call it plan_table$) in the SYS schema (you may prefer to use SYSTEM) as a global temporary table on commit preserve rows
create a public synonym plan_table for plan_table$
grant select insert update delete on plan_table to public
</ul>
Look in $ORACLE_HOME/rdbms/admin/catplan.sql in a 10g version of Oracle to check how it's done.
Each user gets a private (temporary) table in their temporary tablespace whenever they use the plan_table
Their private data disappears when there session ends.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan

Find my Friends : Support for multiple users under the same Apple ID?

Can multiple users under the same Apple ID use the app to find each other? My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time. If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
This worked for me.

Multiple users on the same ODI installation?

Hi all
is it possible to have multiple users working with the same odi installation? We have a virtualized IT infrastructure (citrix and wmware) where we can have multiple users on the same virtual instance. From our point of view, there is no licencing issue since we have a package covering literally everything.
One of the issues are the config files stored in the installation directory of odi (../bin). Is there a way to tell odi to store them in a different location, eg. the user home?
Thanks a lot
Benno

ODI looks in the current working directory for the configuration files, mostly you would have issues with the snps_login_work.xml and snps_login_security.xml files, but these may be common across all users. (just don't store the username/passwords for the ODI users in them).
The way ODI works, most of what are creating is stored in the repository anyway, it is only local GUI config stuff that may be stored locally.
Short answer, yes, you can, but might need to modify the config files a little to make it work.

How to make multiple users on the start up screen

Similar Messages

Maybe you are looking for