How to make muse export to html and image/asset files only without css and jquery?

Hi there adobe community,
I am here today to see if there is a way of only exporting a muse site as html with the css integrated in like dreamweaver does. Therer probably is no way to do this. However, i dont want external .css files and .js files i want them all in the html file, is there a way to do this. The reason i want to know is because my client wants no external files and only wants an image and html documents. I told him that it might not be possible and i want to know if it is. If you could help me that would be great.
Thankyou For Your Time.

Hi Pink,
When Muse exports as HTML , It exports everything separately like the HTML files , .Css files in a different folder and the .js files in a different folder. There is no way in Muse that you can export in any other way.
This is because a lot of the Css properties are used all across the site and not only on a particular page and so these properties are shared.
Moreover this is a much more efficient way of designing a website rather than keeping everything in a single file.
Regards,
Rohit Nair

Similar Messages

Muse export as HTML (bug?)

After I have exported my site to HTML: then all the text are changed in jpg / png . I don't want that: text should stay as text. How can I do so in Muse?

THNX but it's strange that the headers (same font) are doing well. They are not converted to .jpg
How can I covert my site quickly from computer to ipad or telephone?
Best, Marcel
Op 18 mrt. 2015, om 17:02 heeft mac_heibu <[email protected]> het volgende geschreven:
Muse export as HTML (bug?)
created by mac_heibu <https://forums.adobe.com/people/mac_heibu> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7312552#7312552>
Text has to be converted if
• you are using system fonts
Solution:
• Use web- or websafe fonts
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7312552#7312552 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7312552#7312552
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Can't select text when export in HTML and Images

I am entirely new to Fireworks and I can't find anyone to teach me Adobe Fireworks. I followed some youtube tutorials but most of them are vague. I am still figuring the way to export from Fireworks to Dreamweaver, without affecting its contents like bitmap images and the text. When I export in HTML and Images format and opened the htm file, I can't select the text I've inserted in Fireworks. Can anyone tell me what I should do?

I cant scroll below or above viewable section of text in any of my Macbooks, iMac, Mac Mini. Never have been able to, never could, except by pressing the arrow keys whilst selecting, to move up or down.
Its stupid
I dont have flash installed (never will do since my first virus of video ad sound running in background from Cnet was downloaded and kept returning until i deinstalled flash).
I believe that this is a universal issue because none of my Macs can scroll out of screen when selecting text, which as a webmaster and developer, is a pain in the butt
My issue is not in word documents, its in everything

How to make imovie export a sharper video

how to make imovie export a sharper video

set Firefox as your default browser ..start button >default programs >set your default programs >Firefox >set this program as default

How can i get the code html and css of my form please help me

how can i get the code html and css of my form

HI,
If you like to embed the HTML form in your web page then you will need to obtain the form code from the Distribite/Embed tab. Additional information can be found here: http://forums.adobe.com/docs/DOC-1991
You will not be able to access/modify the css code or the rest of the form html code. If you like to view the source of of a HTML page, please use your browser 'view source code' functionality.
I hope this answer your question,
Thanks,
Lucia

How to make a button to stop and run a for loop?

How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.

Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time .

How to make it selected when clicked and open popup

Hi,
I 've a form in the parent page with many form elements.
I've 2 radio buttons with values "Yes" and "No". I am opening a modal popup when clicked on "Yes" radio button. The modal popup is opening fine.
But when I click "Yes", it' s not selected. After modal popup is closed, when I return to parent page, the option "Yes" is still not selected.
How to make it selected when clicked and open popup?

Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.

Well how I make Rounded Table Corners (html) ?

I use dmwr mx 2004 , well how I make Rounded,Table,Corners
(html) ? CSS TABLES can be with Rounded Corners ?

On Wed, 12 Dec 2007 16:40:01 +0000 (UTC), "123polis123"
<[email protected]> wrote:
>I use dmwr mx 2004 , well how I make
Rounded,Table,Corners (html) ? CSS TABLES can be with Rounded
Corners ?
No - you have to use images.
as already said - just google for more info
http://www.google.co.uk/search?hl=en&q=round+corners+on+websites&btnG=Google+Search&meta=
~Malcolm N....
~

How to make CUCM as a TFTP server , then copy files to Voice Gateway ?

how to make CUCM as a TFTP server , then copy files to Voice Gateway ? anyone knows?

Hi,
Please check the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/cucm-accm-611/a02tftp.html#wp1023004
Understanding How Devices Access the TFTP Server
You can enable the IP phones and gateways to discover the TFTP server IP address in one or more of the following ways, depending on the device type:
•Gateways and phones can use DHCP custom option 150.
Cisco recommends this method. With this method, you configure the TFTP server IP address as the option value.
•Gateways and phones can use DHCP option 066.
You may configure either the host name or IP address of the TFTP server as the option value.
•Gateways and phones can query CiscoCM1.
Ensure the Domain Name System (DNS) can resolve this name to the IP address of the TFTP server. Cisco does not recommend this option because it does not scale.
•You can configure phones with the IP address of the TFTP server. If DHCP is enabled on the phone, you can still configure an alternate TFTP server IP address locally on the phone that will override the TFTP address that was obtained through DHCP.
•Gateways and phones also accept the DHCP Optional Server Name (sname) parameter.
•The phone or gateway can use the value of Next-Server in the boot processes (siaddr).
Devices save the TFTP server address in nonvolatile memory. If one of the preceding methods was available at least once, but is not currently available, the device uses the address that is saved in memory.
You can configure the TFTP service on the first node or a subsequent node, but usually you should configure it on the first node. For small systems, the TFTP server can coexist with a Cisco Unified Communications Manager on the same server.
HTH
Manish

Muse Export to HTML Error #1000 -

Just updated Muse to version 5, and am trying to export the site to html and it almost finished the process when I get error #1000 - not enough system memory. It doesn't crash Muse though, it just won't finish the export. My file size is 50 MB and I can preview individual pages in a browser (Chrome) without issue. How do I change the preferences for system memory in Muse?

Hi CanadianForester,
While I realize the export is now working for you, I'd be grateful is you could send us a copy of your .muse file at [email protected] along with a link to this thread (you could use a service such as WeTransfer, Adobe SendNow, Dropbox, etc.).
We're currently investigating a bug that can result in this error when exporting some sites and it would be very helpful to have another file that has encountered this error. Thanks.

How to make a website for desktop and mobile

I just have a question about, for example, washingtonpost.com. I know in CSS you used to be able to put that "/media" and "/screen" command in head and when the page loads, it detects the device and sends you to either mobile or desktop.
I went to WaPo and I can't seem to find that any more. So using WaPo, is this still how it's done? I just need to test a basic web page in DW4 and then test how it looks on desktop and then my Galaxy Note II so I know I'm moving along correctly before expanding out.
Any advice, help, and tips are appreciated.
Thank you.

media="screen" or media="print" is part of a css link in the head of a page and allowed one set of rules for print and another set for screens.
It was the precursor to "Media Queries" which is what you're looking for.
Here's a good starting point for Media Queries...
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
Basically, you make one site in html, then 2 stylesheets that control the site depending on the viewer device. You use the pixel width of the device or browser window to determine which stylesheet is used. When they're on a desktop, stylesheet1 is used, when they move onto something smaller, stylesheet2 kicks in.
The basics are pretty simple, getting the most out of it takes practice.

How to make it work in HTML?

The project run very well in Chrome, firefox and IE after published. (Stand alone)
http://www.ctmotorfairing.com/Test/index.html
However, after I integrated it in my existing HTML, in IE and firefox can't display any more. (Chrome is Perfect)
http://www.ctmotorfairing.com/Test/index3.html
Anyone can teach me how to make it correct integrated into my HTML position?

Ling,
In plugin, Clients IE setting is used. But In HTML , its used server’s IE setting.
Check if you are able to open URL from server or not.
Regards,

How to make excel export in jsp

Hi All,
I have a jsp page to display a table. I want to add a "excel download" button
in this page, once user click this button, it will invoke the microsoft excel
and all table content will appear in the excel spreadsheet.
I tried to set the content: <%@ page contentType="application/vnd.ms-excel"%>
the rest code as following. However, it won't work for me. Does anyone has any
experience in doing this?
<%@ page contentType="application/vnd.ms-excel"%>
<%@ taglib uri="netui-tags-databinding.tld" prefix="netui-data"%>
<%@ taglib uri="netui-tags-html.tld" prefix="netui"%>
<%@ taglib uri="netui-tags-template.tld" prefix="netui-template"%>
<netui:html>
<head>
<title>
Web Application Page
</title>
</head>
<body>
<table border="1">
<tr style="background-color:#3366ff;font-family:arial;">
<td>Structure</td>
<td>Compound</td>
<% // Get the Items from the request stream
Vector mr_names = (Vector) request.getAttribute("method_result_names");
for (int f=0;f<mr_names.size();f++) {
out.println("<td>" + mr_names.get(f) + "</td> ");
Vector mrs = (Vector) request.getAttribute("method_results");
for (int g=0; g<mrs.size(); g++)
out.println("</tr><tr>");
Vector row1 = (Vector)mrs.get(g);
for (int f=0;f<mr_names.size()+1;f++) {
String s = (String)row1.get(f);
if (f==0) {
%>
<td><embed src="structure.jsp?Sample_code=<%=s%>" width="120" height="100"></embed></td>
<%
out.println("<td>" + s + "</td> ");
out.println("</tr>");
%>
</table>
</body>
</netui:html>
Thanks!
Zhenhao

I am trying to do the same thing. I also cant get it to work. I am
thinking it may have something to do with the concept of ScopedResponse, but
I am not sure. There is very little documentation and more importantly
examples of how to make sense of the getOuterResponse() method. Dev2Dev and
Google are of no help.
Anyone care to explain this to us?
Michael.
"Zhenhao Qi" <[email protected]> wrote in message
news:3fd4f634$[email protected]..
>
Hi All,
I have a jsp page to display a table. I want to add a "excel download"button
in this page, once user click this button, it will invoke the microsoftexcel
and all table content will appear in the excel spreadsheet.
I tried to set the content: <%@ pagecontentType="application/vnd.ms-excel"%>
the rest code as following. However, it won't work for me. Does anyone hasany
experience in doing this?
<%@ page contentType="application/vnd.ms-excel"%>
<%@ taglib uri="netui-tags-databinding.tld" prefix="netui-data"%>
<%@ taglib uri="netui-tags-html.tld" prefix="netui"%>
<%@ taglib uri="netui-tags-template.tld" prefix="netui-template"%>
<netui:html>
<head>
<title>
Web Application Page
</title>
</head>
<body>
<table border="1">
<tr style="background-color:#3366ff;font-family:arial;">
<td>Structure</td>
<td>Compound</td>
<% // Get the Items from the request stream
Vector mr_names = (Vector) request.getAttribute("method_result_names");
for (int f=0;f<mr_names.size();f++) {
out.println("<td>" + mr_names.get(f) + "</td> ");
Vector mrs = (Vector)request.getAttribute("method_results");
for (int g=0; g<mrs.size(); g++)
out.println("</tr><tr>");
Vector row1 = (Vector)mrs.get(g);
for (int f=0;f<mr_names.size()+1;f++) {
String s = (String)row1.get(f);
if (f==0) {
%>
<td><embed src="structure.jsp?Sample_code=<%=s%>"width="120" height="100"></embed></td>
>
<%
out.println("<td>" + s + "</td> ");
out.println("</tr>");
%>
</table>
</body>
</netui:html>
Thanks!
Zhenhao

Exporting the HTML and editing it down the road?

Hi- I have a client who want a very simple website built. He wants me to give him the HTML code when I'm done so he can ultimately do the edits. Is the code that Muse exports clean and easily to view and understand in Dreamweaver? I'd love to build it in Muse, but wondering if I should instead code it by hand so what I give him is not funky.
Any advice would be appreciated!

The HTML generated by Muse is not intended to be edited further.
An experienced designer could edit it with some pain but if a client is asking you do design the site, they are probably not experienced enough to understand the messy HTML made by Muse.

How to make a "export selection to PNG"?

Hi everyone,
I really need to export selected objects (or groups) to PNG... and I need it to be fast, i cant waste time exporting to PDF and converting in photoshop.
I made a script to do this, but the quality is soo poor... so what i want to know is:
-Is it possible to do this with the InDesign SDK?
...and if it is possible, how hard it would be?
Im not really a developer, so i want to know what i have to do, so i can ask a friend to do.... or something like that!
Thanks!
(sorry about my bad english)

InDesign CS4,
step 1. Create SnapshotUtilsEx() with addTransparencyAlpha is kTrue.
SnapshotUtilsEx fSnapshotUtilsEx
          = new SnapshotUtilsEx(
                itemUIDRef,      xScale, yScale, desiredRes, minRes, bleed,
               SnapshotUtilsEx::kCsRGB,
               kTrue, //bool8 addTransparencyAlpha ,
               kFalse);
step 2. Draw() with option ...
     fSnapshotUtilsEx.Draw( IShape::kPreviewMode|IShape::kPrinting );
step3. ExportImageToPNG
    IDFile fileSysFile = target png filename..
   InterfacePtr<IPMStream> pngStream(StreamUtil::CreateFileStreamWrite(fileSysFile, kOpenOut|kOpenTrunc));//, fileType, creator));
   if (pngStream == nil) {
   break;
   status = fSnapshotUtilsEx->ExportImageToPNG(pngStream);

How to make muse export to html and image/asset files only without css and jquery?

Similar Messages

Maybe you are looking for