How to make my iPhone 4S work again after upgrading to iOS 5??

After I accepted an upgrade of iOS 5 to my new iPhone 4S, it gives me a message (no SIM). It was working fine before I downloaded the software. Help please.

Can you explain can't operate like before.. what exactly is the issue at hand?

Similar Messages

HT4061 how can i make my iphone 4 work again from this activation lock thing?

how can i make my iphone 4 work again from this activation lock thing?

Can you provide more info. iOS version? Did you have iOS 7 BETA installed previously? (if so, go to your developer account at developer.apple.com to fix things)
Try this link...
http://support.apple.com/kb/ts3424

My iPhone 4s keeps restrating after upgrading to iOS 7.1.2 and comes up with recovery mode.

My iPhone 4s keeps restrating after upgrading to iOS 7.1.2. I tried to restore for few times using iTunes and installed only 8 apps freshly from iTunes apps store. After restating the phone goes to recover mode every time. Last time it came up with a diagnostic massage with a big apple logo saying..'we are hanging there'. I am really frustrated with Apple coz my last mobile 3GS's network circuit was so poor that I could not use that to make call. However can any one help me with my iPhone 4s problem? I've no warranty left that's why I think apple will not help me any ways.

Try changing the channel on your router to manually select & use,the highest number channel available. After I did that I no longer had the problem.

Camera iphone 4 cdma blank after upgrade to ios 7.1

camera iphone 4 cdma blank after upgrade to ios 7.1, before update to ios 7.1 all camera working good (front and rear) but after upgrade my rear camera still black screen but front camera was fine.
help me plis

Hello, hidrahmat.
Thank you for visiting Apple Support Communities.
This article will help your troubleshoot the camera issue with your iPhone. See the section labeled Camera isn't functioning or has undesired image quality.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the issue persists, see the last section labeled Issue not resolved.
Cheers,
Jason H.

I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it.
Where did you get the phone?

How do get my ipod to work again after it died

How do i get my ipod to work again after it died and wont charge?

Well...hm... Your going to have to replace it, or get it serviced. Or give it to Apple for a 10% discount on another. What gen is it? Some people buy broken iPods like:
https://www.gazelle.com
or maybe its spelled https://www.gazzelle.com
I dont remember

Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
I have a 4th gen ipod touch which until upgrading to 6.1 from 6.0 was working perfectly.
Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird! Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
thanks!

I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back.

IPhone and iHome Compatibility after upgrading to IOS 5

I have an iPhone 4 which I recently upgraded to ios 5. Prior to upgrading I was able to charge the phone on the iHome. After the upgrade, it doesn't work. I tried re-setting the phone, the iHome - at first this worked and let it charge. Now it doesn't charge - still plays music fine. The phone does charge with the adapter in the wall as well as an adapter for the car which charges and plays music over the airwaves.
I upgraded my phone first and had the above. My wife has the same iPhone 4 - same thing - charged and played music fine prior to upgrading. Now it doesn't charge but plays music fine.
So, what's the deal? Any suggestions or is this a result of a problem with the upgrade softwar which needs to be fixed?
Thanks

My WiFi connection works fine, but 4G from ATT gives in 0.15 mpbs download. I called up ATT several times, but they have no resolution to this problem. Everytime they ask me to reset my network connection. This is a big deal for me as I am most of the time on Cellular Data and I need to use iPhone for my work. I am thinking to roll back to iOS 5.0.1. What in this world could turn a 3G phone into a 4G phone just by a software upgrade? I just feel like I am down to a 1G phone. Apple please fix this asap and release a patch, else I may not be able to use this phone.

Anyone figure out how to get Powershot G2 to work again after update to 1.5

All my raw files from my Powershot G2 are now "Unsupported" since the update. Has anyone figured out how to update the program to allow support for that camera again? Any help would be much appreciated! Thanks

You can get the old hack for the Canon Powershot G2 RAW support to work again on 10.4.8 and Aperture 1.5, and you do NOT need to revert back to the old 10.4.7 IO Frameworks file. The solution is to download the new 2006-01 RAW Camera Support update from Apple's web site. Here is the link version for PPC machines (which is what I have):
http://www.apple.com/support/downloads/digitalcamerarawsupportupdateppc.html
There his also a Universal version on Apples site (but I have not tried this version):
http://www.apple.com/support/downloads/digitalcamerarawsupportupdateuniversal.ht ml
After you install this update, it will place a new copy of the RAW.plist file in the usual place:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fram ework/Versions/Current/Resources/Raw.plist
Edit this file with the old hack, making sure to add the "" to the 1st line and save it back. A few notes on this:
1) I'm not sure whether the "" is needed, but similar items appear in all other cameras now, so no harm in adding it.
2) To place the editted version back in the library, I had to 1st move the old RAW.plist file to the trash, then copied the editted version to the library. I then restarted to allow me to delete the version in the trash (otherwise the system thinks it is still in use).
3) To be safe, I also did a repair permisssions (which did repair the permissions of the new RAW.plist file).
After this, I was able to open Powershot G2 RAW files in Aperture and PReview (have not tried iPhoto, but is shoudl also work there).
Here is the hacked code for the Canon G2 camera.
<key>Canon-PowerShot G2</key> 
<dict>
<key>blackReplace</key> <true/>
<key>black</key> <integer>32</integer>
<key>max</key> <integer>1023</integer>
<key>white</key> <integer>1023</integer>
<key>premul0</key> <real>1.90</real> <key>premul1</key> <real>1.00</real> <key>premul2</key> <real>1.22</real>
<key>m1</key>
<array>
<real>1.0507</real> <real>-0.4281</real> <real>-0.0161</real>
<real>-0.5540</real> <real>1.2938</real> <real>0.2909</real>
<real>-0.1205</real> <real>0.1844</real> <real>0.8335</real>
</array>
<key>m2</key>
<array>
<real>0.9087</real> <real>-0.2693</real> <real>-0.1049</real>
<real>-0.6715</real> <real>1.4382</real> <real>0.2537</real>
<real>-0.2291</real> <real>0.2819</real> <real>0.7790</real>
</array>
<key>mc</key> <real>0.83355</real>
<key>otrc</key>
<array>
<real>0.450</real> <real>0.090</real> <real>1.467</real> <real>0.260</real> <real>1.842</real> <real>0.652</real> <real>1.040</real> <real>0.538</real>
</array>
</dict>

Camera lock screen iPhone 5 not working properly after upgrade to iOS 8

After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
Has anyone else experienced this problem?

Having the same problem. I'm on an iPhone 5 and I have updated to 8.0.2. When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen. It appears that removing my passcode fixes this bug, but I can't have an unsecured phone. Please help Apple!

Fix for my iPhone 3Gs WiFi problems after upgrade to iOS 4

Posting incase this helps. I upgraded to iOS 4 on my 3Gs while away from home and came home to find that I couldn't get a reliable connection to my home WiFi which had been rock solid when I left two weeks ago.
My network consistes of a telco supplied router & ADSL box connected by LAN to an Airport Extreme which then connects wirelessly to an Airport Time Machine in another room (actually a steel lined safe room so I have to be sure that the door is open). The Time Machine is set to act as a range extender as is an Airpot Express N I have connected to a hifi.
Well after rebooting everything and scratching my head I took a look at the wireless settings on the base Airport Extreme. *It was set to 802.11n only!* I, therefore, have no idea how my iPhone was able to connect to this up to now. *I've set it now to 802.11n (b/g compatible)* and the iPhone once again connects and re-connects without any trouble at all.
I know the 3Gs is not capable of 802.11n but I can assure you that for the last few months I haven't changed that router so it was certainly working in that 802.11n only mode on that apple router.

Hey, that's a great tip for others who are having issues to check out. Thanks for posting your findings!

Iphone 5s Hangs randomly after upgrading to IOS 8

I am bit worried about IOS upgrade. I am using Iphone 5s since March 2014. Till date it was working fine. But when I upgraded my Iphone from IOS 7.1.2 to IOS 8 problem starts arriving.
Symptoms : 1. The phone hangs randomly after upgrade.
2. After selecting any application , it disappear suddenly. I have to start the application again. This mostly happen when I select Setting icon
This is very much embarrassing that I am using one of the best phone in the world and it hangs automatically when I need it most.
The only resolution for hang phone is to reboot.
I upgraded to latest IOS 8.0.2 but still no improvement. I am expecting Apple team to look into this issue and resolve it. Waiting for your response.

I have 5 Iphone 5's and Ipad Air. All upgraded to ios8. Everyone locks! it is so locked you have to hold home button and power button serial times. It reboots and just shows apple. When you use Safari, or type a text message, they just get behind then lock up with half a screen or half the icons.
All my kids hate their devices now. I know Apple will fix. It is scary as i have never seen iPhones actually lock up and un-usable. this should have been caught in Beta. Perhaps Apple should get some "Real" outside normal users to beta. The ones they are using are not catching this stuff. Code is complicated, Apple has the best minds, Just keep holding the Home button and power button. Eventually it will reboot. Then close all the open apps. and don't tilt the phone sideways.
Also close all un-used webpages left open in safari. this seems to fix.
As for the Bug about lagging while texting and half screen lock ups. that needs to be fixed ASAP.
I know from building things, there is always a few hiccups. Yelling won't do anything, give Apple a chance to fix it. I love Apple, and will continue to purchase the items. The world economy is changing, suppliers are going green, thus you get cheap bendable parts too. Apple will find the middle ground and work the problem. Please all post they read these blogs.
If Apple deletes your posts and denies these problems then email Tim Cook. He does listen. Give it a week then it will all be sorted out. If apple sold iPhone 6 pluses that bend, then i am sure they will offer a replacement. Apple does care, May seem arrogant but they always come through at the end.
Hang in there, i always rush and put the update on the minute it comes out, over and over, then complain about the bugs. Better to wait a month. i am addicted to new and better and just click upgrade. My fault too. I know better after 37 years with apple.
Kind Regards,
B

Push email (MS exchange) works intermittently after upgrade to ios 5.1 and ios 5.1.1

I have an iphone 4 with my office email (MS exchange) account configured. Other accounts are Gmail & iCloud.
Office email is configured as Push, Gmail as Fetch and iCloud as Push.
Till ios 5.0.x everything was fine. Office emails were getting pushed and there were no issues.
However after upgrading/restore to ios 5.1 & then 5.1.1 push email mostly does not work.
Few observations :
1. Push email works fine when I am at home on wi-fi.
2. When I leave home for work (therefore on 3G), mails stop getting pushed. Sometimes they get pushed for a period of 1 to 2 hours. Then they stop
3. Manually fetching office mails also does not work
4. Strangle accessing the office webmail site in Safari https://mail.xxxxx.com does NOT work. While i can load other sites in safari, the mail site does not load.
5. In office sometimes in the lift phone switches from 3G to Edge or no signal and then when out of the lift, suddenly mails get pushed, but then stop after some time.
6. Moment I get onto wi-fi, push emails start working
7. There is no issue with accessing gmail.
8. Other push notifications work (gmail app, facebook notifications etc)
9. There have been no changes to our MS exchange server
10. I have tried the usual stuff of resetting network settings, rebooting the phone, killing the mail app, going to airplane mode, deleting the mail a/c and recreating etc etc. But no luck.
Apart from upgrading/restoring to 5.1 and then 5.1.1, there have been no changes. The upgrades were done OTA, restore from 5.1.1.
However both times I have not set the phone as new and have restored backups.
Is anybody facing a similar issue ?
Any suggestions ?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

My Iphone charges super slowly after upgrading to IOS 7

My phone charges super slowly after upgrading . Usually it's take about 2hours for a full charge now it's not even 60%

The iPhone will fast charge for the first 2 hours or so.. and then will trickle charge for the next couple of hours.
Try putting it on Charge Over Night... Then monitor it for next the week or so... Charging as you normally do.
More Info here... iPhone Charging the battery
http://support.apple.com/kb/HT1476

How I got my ipdo to work again after the latest updater

after about 20 hours of headaches and listening to everyone's similar problems and trying everything under the rotten apple tree, here's yet another solution that seems to have fixed the problem. will have to wait and see how long.
I went to another computer that has never been tainted by (cr)apple software before. downloaded (do a save to a folder not a run) an earlier ipod updater from here http://www.soft32.com/download_121872.html
I then disabled my network connection and installed the updater. after doing that I got a windows pop-up about rebooting to update my usb drivers. I said no, I prefer microsoft.
it took a couple of tries but I got my ipod restored with nothing on it of course.
I then installed itunes (latest version). It did recognize my ipod and I told it "not to auto update". I played around manually dragging files onto my ipod and it seemed ok so I took it back to the original computer that has my thousands of songs on it. experimented some more with manually updating it. felt it was working fairly well so took a chance at having it auto-update. all seems fine now.
now at the risk of being un-constitutionally censored here's my opinion about the whole scneario.
a) the people at apple are too incompetent to conjure up a "force to upgrade hardware" scheme. sorry, it's simply just that same incompetence that has created the problem. the same incompetence that can't fix the problem. and the same incompetence that ignores the problem. any decent company wouldn't ignore it's customers like this. at least admit the problem and say your working on it.
b) when an apple product works it works...when it doesn't it doesn't. there are no fixes, no solutions. when it breaks it's time to purchase something new. anyone even contemplating sending in their ipod for repair shouldn't. if you are going to dish out that kind of dough you should move away from apple's proprietary stuff and get with the program and move to an industry standard such as mp3.
c) the ipod fad will end like everything else in apple's history. the ipod like every other apple product is a joke. why else after 20 years can they only manage but a tiny percentage of the personal computing market.
d) I'm obviously not a fan of apple, never have been never will be..just had a brief moment of insanity when purchasing my ipod a couple years back. will never happen again.
thanks fellow customers for listening...thanks apple for nothing
hope some of you get to read this before I'm deleted.

after about 20 hours of headaches and listening to
everyone's similar problems and trying everything
under the rotten apple tree, here's yet another
solution that seems to have fixed the problem. will
have to wait and see how long.
I went to another computer that has never been
tainted by (cr)apple software before. downloaded (do
a save to a folder not a run) an earlier ipod updater
from here http://www.soft32.com/download_121872.html
I then disabled my network connection and installed
the updater. after doing that I got a windows pop-up
about rebooting to update my usb drivers. I said no,
I prefer microsoft.
it took a couple of tries but I got my ipod restored
with nothing on it of course.
I then installed itunes (latest version). It did
recognize my ipod and I told it "not to auto update".
I played around manually dragging files onto my ipod
and it seemed ok so I took it back to the original
computer that has my thousands of songs on it.
experimented some more with manually updating it.
felt it was working fairly well so took a chance at
having it auto-update. all seems fine now.
now at the risk of being un-constitutionally censored
here's my opinion about the whole scneario.
a) the people at apple are too incompetent to conjure
up a "force to upgrade hardware" scheme. sorry, it's
simply just that same incompetence that has created
the problem. the same incompetence that can't fix the
problem. and the same incompetence that ignores the
problem. any decent company wouldn't ignore it's
customers like this. at least admit the problem and
say your working on it.
b) when an apple product works it works...when it
doesn't it doesn't. there are no fixes, no
solutions. when it breaks it's time to purchase
something new. anyone even contemplating sending in
their ipod for repair shouldn't. if you are going to
dish out that kind of dough you should move away from
apple's proprietary stuff and get with the program
and move to an industry standard such as mp3.
c) the ipod fad will end like everything else in
apple's history. the ipod like every other apple
product is a joke. why else after 20 years can they
only manage but a tiny percentage of the personal
computing market.
d) I'm obviously not a fan of apple, never have been
never will be..just had a brief moment of insanity
when purchasing my ipod a couple years back. will
never happen again.
thanks fellow customers for listening...thanks apple
for nothing
hope some of you get to read this before I'm deleted.
This worked for me - so far anyway. Thanks

How to make my iPhone 4S work again after upgrading to iOS 5??

Similar Messages

Maybe you are looking for