How to make my phone vibrate when I receive a push notification?

A mate of mine receives a vibration when he gets a push notification from snapchat, yet mine doesn't. I was wondering how to do this? He wasn't sure, and we couldn't figure it out. I'd love to have the same thing, cheers.

Check this:
https://support.snapchat.com/a/push-notifications

Similar Messages

  • How can I change the settings such that the phone does not vibrate when I receive a message in silent mode, but vibrates for calls?

    I'd like the phone to vibrate when I receive a call when it is in silent mode (as it already does) but I'd like it to not vibrate when I receive a text in silent mode. I know how to set both (calls and texts) to not vibrate in silent mode, or choose no vibration for texts when loud or silent, but not what I just mentioned. Thanks.

    Try this - Settings > Sounds > Text Tone > Vibration (at the top) > None.
    Edit - just read the last part of your post closer and I'm not aware of such an option.
    Message was edited by: Allan Sampson

  • How to make the phone's battery last longer ?

    Hi everyone,
    i am wondering if there is any difference when the battery is fully desharged thus the phone swithes off , and then you plug it into the power outlet to be charged.
    or if it is not fully decharged, and it has some one or two battery bars on the upper right corner of the display, and you set it to be charged, is there any signifficant difference between these two states ?
    is there any official or technical advice on "How to make the phone's battery last longer " ??
    thanks in advance.

    It depends on the battery.
    Charging the battery when there is some power in it is especially bad for NiMH batteries. The loss of power is called "memory effect" - battery "remembers" that it does not get fully utilized and over time starts supplying less power.
    But new Nokias come with Li-Ion or Li-Polymer and the effect on these being charged when there is still power in them is negligible. Especially for the Li-Polymer ones.
    See here about batteries and "memory effect":
    http://en.wikipedia.org/wiki/Battery_%28electricity%29#Life_of_rechargeable_batteries
    http://en.wikipedia.org/wiki/Memory_effect
    Here's more info on types of batteries:
    http://en.wikipedia.org/wiki/Li-Ion
    http://en.wikipedia.org/wiki/Lithium_polymer_cell
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?

    i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?

    You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
    I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
    Regards.

  • How to make i phone 4s to give a busy signal rather hold and answer?

    how to make i phone 4s to give a busy signal rather hold and answer?

    Sorry, I ment how to make i phone 4s to give a busy signal rather hold and answer when a second call comes in?

  • In windows 7, how to make firefox start automatically when I turn on the computer

    In Windows 7, how to make Firefox start automatically when I turn on the computer. Note, I am asking how to do this with Windows 7, not xp, not vista.

    You need to place a shortcut to open Firefox in the Start > Programs > Startup folder.<br />
    That is basically the same in all Windows versions.

  • How to make VM to suspend when it not use , VDI3.0 with SGD 4.5

    Hi All,
    We are using SunVDI3.0 with VBox 2.0.10 and connecting via SGD 4.5.
    i konw that we can do suspending vm on vmware esx, however i couldn't find it in VirtualBox provider.
    how to make VM to suspend when vm is not using for some period time.
    thanks in advance
    -kevin-
    Edited by: kevin on Sep 27, 2009 5:44 PM

    Hi All,
    We are using SunVDI3.0 with VBox 2.0.10 and connecting via SGD 4.5.
    i konw that we can do suspending vm on vmware esx, however i couldn't find it in VirtualBox provider.
    how to make VM to suspend when vm is not using for some period time.
    thanks in advance
    -kevin-
    Edited by: kevin on Sep 27, 2009 5:44 PM

  • This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in.

    This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.

    To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.

  • How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?

    How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
    Tried connecting to itunes and hitting restore and get a error message 3194.
    Any help would be greatly appreciated.

    odds are entering password too many times

  • HT3576 how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

    how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

    I have had this same issue but thankfully fixed it. Follow he steps below:
    Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
    Go to Settings > Reset > Erase All Content and Settings
    Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
    After everything has sync'd back to your phone everything should work fine.
    Hope this helps.

  • When i receive a twitter notification there is no sound

    when i receive a twitter notification there is no sound at all  i think this is will happen with mail too i need someone to just explain what is goin on ?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • How to make phone vibrate when call is answered?

    Hi!
    Does anybody know how to make a BB phone (Bold 9700) to have a short vibrate when your call is being answered, so that you don't have to look at the phone or hold it to your ear when making a call?
    Appreciate any advice, thks!

    Hello Daven02,
    You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
    You can find a variety of supported headsets at the Shop BlackBerry website.
    Thanks and have a great day!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to make screen field enable when table control gives an error

    Hi,
        I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
    How to make the other parameter enable when table control throws an error.
    Regards,
    Jaya

    Hi Gobi,
         Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
    For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
    as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
    please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
    Thanks
    Jaya

  • Stop phone vibrating when receiving emails in silent mode

    Hi,
    I have an iphone 4 and the iOS5 update. 
    I mainly have my phone switched to silent mode which is fine for receiving texts and calls as I prefer it to vibrate, but how can I stop it vibrating every time I receive an email without disabling silent mode?
    Thanks

    If I remember correctly, Apple has been experimenting with the vibrate-for-emails feature in the iOS 5 betas. The phone would vibrate for new email message on one beta and they'd drop it again for the next. Seems like it has made its way to the final iOS 5 and thus you won't be able to disable it selectively. One alternative, though not really a good solution, is to check for new mail manually and not have the phone do that for you on an intervall or via push.
    Sebastian.

  • How to make view automatically scroll when keyboard show up

    Hi all
    I'm like a totally noob for objective-c coding, let alone the iPhone programing. :P
    Anyway, I somehow manage to create a simple application that receive input via UITextField, do some simple math, then display the result in other UITextFields (which can act as a input vice versa).
    Problem is, when I use the UITextField at the buttom of the screen as an input, the keyboard will block that text field out of my view, so I could not see what I'm typing at all.
    That's the question. How to make my view scrollable, and make it simply scroll itself out of the way when the keyboard is shown? I already inherit my view from UIScrollView, but don't know what to do next. Can you guys help enlighten me, please?
    Thanx

    Of course, if you're dealing with textFields, you should change a few things try something like that in your .m file :
    - (void)textFieldDidBeginEditing:(UITextField *)theTextField
    if ([theTextField isEqual:yourTextField])
    // Restore the position of the main view if it was animated to make room for the keyboard.
    if (self.view.frame.origin.y >= 0)
    [self setViewMovedUp:YES];
    // Animate the entire view up or down, to prevent the keyboard from covering the author field.
    - (void)setViewMovedUp:(BOOL)movedUp
    [UIView beginAnimations:nil context:NULL];
    [UIView setAnimationDuration:0.3];
    // Make changes to the view's frame inside the animation block. They will be animated instead
    // of taking place immediately.
    CGRect rect = self.view.frame;
    if (movedUp)
    // If moving up, not only decrease the origin but increase the height so the view
    // covers the entire screen behind the keyboard.
    rect.origin.y -= kOFFSETFORKEYBOARD;
    rect.size.height += kOFFSETFORKEYBOARD;
    else
    // If moving down, not only increase the origin but decrease the height.
    rect.origin.y += kOFFSETFORKEYBOARD;
    rect.size.height -= kOFFSETFORKEYBOARD;
    self.view.frame = rect;
    [UIView commitAnimations];
    - (void)keyboardWillShow:(NSNotification *)notif
    // The keyboard will be shown. If the user is editing the author, adjust the display so that the
    // author field will not be covered by the keyboard.
    if ([yourTextField isFirstResponder] && self.view.frame.origin.y >= 0)
    [self setViewMovedUp:YES];
    else if (![yourTextField isFirstResponder] && self.view.frame.origin.y < 0)
    [self setViewMovedUp:NO];
    #pragma mark - UIViewController delegate methods
    - (void)viewWillAppear:(BOOL)animated
    // watch the keyboard so we can adjust the user interface if necessary.
    [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWillShow:)
    name:UIKeyboardWillShowNotification object:self.view.window];
    - (void)viewWillDisappear:(BOOL)animated
    [self setEditing:NO animated:YES];
    // unregister for keyboard notifications while not visible.
    [[NSNotificationCenter defaultCenter] removeObserver:self name:UIKeyboardWillShowNotification object:nil];
    be sure to invoke the method when you dismiss the keyboard, so that the view "falls back" to its normal state:
    if (self.view.frame.origin.y < 0)
    [self setViewMovedUp:NO];
    Of course, declare the method
    (void)setViewMovedUp:(BOOL)movedUp;
    in the .h file
    and the #define you will use in you .m file :
    // the amount of vertical shift upwards keep the text field in view as the keyboard appears
    #define kOFFSETFORKEYBOARD 50.0
    // the duration of the animation for the view shift
    #define kVerticalOffsetAnimationDuration 0.30
    good luck !

Maybe you are looking for