How to make my pixma ip 90 to work wireless with windows 7/64
how to make my pixma ip 90 to work wireless with windows 7/64 i installed the bu-10 it is authorized but can't make it to print wireless.
Hi again manny2249,
If the Bluetooth Settings feature does not appear on the Canon iP90 Setup Utility screen, the Bluetooth unit may not be installed correctly. We recommend contacting us via one of the support methods listed at the Contact Us link below for assistance with setting up the printer via Bluetooth.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
How to make a MacBook Pro (mid 2009) work properly with a 3M Streaming projector?
Ok, so I have a MacBook Pro (mid 2009), a 3M Streaming projector and very annoying problem.
When I connect my MacBook Pro with a Mini Displayport to HDMI adapter to the 3M projector, I get a pink tint, like a filter over the image, it’s very frustrating.
This are the tests I’ve done:
1. I tried the adaptor and the projector on a different (more recent) Mac -> It worked fine.
2. I tried connecting my MacBook Pro to a different not HDMI but VGA projector -> It worked fine.
3. I used some Terminal code I found on the web to force the Mac to send RGB signal, don’t know if that has anything to do with it, but I tried anyway -> Didn’t work
So I’m confused, it’s not the physical port of my MacBook cause it worked fine with a VGA projector, It’s no the 3M projector and it’s not the Mini Displayport to HDMI adaptor cause it worked fine on a different Mac.
So what is it?
I’m totally desperate, I haven’t been able to solve this problem, so if you guys can help me you will be my heroes.
Thanks.
– 13" MacBook Pro (mid 2009) runing Mavericks.
– 3M Streaming projector Powered by Roku.Yes as Clinton says this is correct.
I've used a Sata to USB connector which is only a few pounds instead of an enclosure for the clone, but then I wasn't keeping mt old HDD. But that's an option if you don't need it.
I also use Carbon copy cloner as this will clone your recovery partition as well. Apples disk utility will also clone drives but I'm not sure that it copy's the recovery partition.
I highly redomend my Samsung 840 pro 256Gb - it's about the fastest drive you'll get (nearly) but is backed by Samsung's unrivaled SSD reliability and 5 year warranty. I've also used an 840 basic model on an older macbook and was equally pleased.
Crucial's drives are reliable mac friendly drives but are somewhat slower on the write speeds vs the 840 Pro.
I'd avoid OCZ drives due to so many failures across their range although they do have great reviews and some models just edge the Pro on speed although it's fairly negligible.
As Clinton says, avoid the Samsung Evo drive. I wanted to buy this drive as it is a great drive - but there are many users that have had compatibility issues with it when installed in a Mac. This may rectified on a future firmware update possibly, but until it's proven I would avoid it for now. -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
How to make my HP 5150 to print in color with iMac with 10.9 OS
How to make my HP 5150 to print in color with iMac with 10.9 OS
Read the user manual that came w/the printer and/or contact HP Support.
-
Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?
Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?
Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help. -
How to make my Execute Immediate statement to work??
Hi, Sir:
I use SQL Oracle 9i,
I have following procedure called by a trigger:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp;';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
My trigger is:
CREATE OR REPLACE TRIGGER emps_biu_after
after INSERT OR UPDATE or delete on emp
for each row
begin
if TO_CHAR(SYSDate,'DY')= 'SUN'
then
DBMS_OUTPUT.PUT_LINE('Today is holiday, ename =' );
else
DBMS_OUTPUT.PUT_LINE('Today is working Day, ename =');
emps_check();
end if;
end;
When I use following to update emp table:
SQL> UPDATE emp T1
2 SET T1.sal = 200.0
3 WHERE T1.ename like '%SCOTT%';
I got:
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
Looks like EXECUTE IMMEDIATE s_sql; did not work.
What is wrong??
How to make my Execute Immediate statement to work??
ThanksYou may omit the ';' character...
s_sql:='INSERT INTO
Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO)
select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO
from emp';
... and something else
IN PL/SQL when a procedure , function doews not take
any parameter(s) then its call can be made as simply
its name without a pair of parenthesis....(It seems
that you are influenced by Java...:) )
SimThanks Sir:
I remove this ; but still error:
1 UPDATE emp T1
2 SET T1.sal = 768.1
3* wHERE T1.ename like '%SCOTT%'
SQL> /
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
My code as follows:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
what is other wrong??
Yes, I am java guys,
Thanks -
How to make sure that schema name is not included with generated sqls
How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanksThe full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer?? -
How can I have a single cursor using elements 9 with Windows 7?
Currently the cursor on my screen is 3 small boxes in place of the single arrow. I am using Photoshop Elements 9 With Windows 7. I have loaded the patch files currently in the Adobe system without any success.
Thank-you that solved the issue.
In a message dated 4/20/2014 8:57:10 P.M. Eastern Daylight Time,
[email protected] writes:
Re: How can I have a single cursor using elements 9 with Windows 7?
created by Barbara B. (http://forums.adobe.com/people/Barbara+B.) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/6315096#6315096) -
How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3?
How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3? Seriously frustrated. I put the disc in the drive and nothing happens. I open up add/remove programs and I get an error message stating it can't find a disc. I chatted with Adobe support, and they decided to send me here. Probably because they knew I wanted to spend all day online trying to figure this out.
Download from Adobe's website, install then enter your serial number.
Download and Installation Help -
How can I run MP350 with Windows 8.1 computer? Works OK with Windows 7 machine. Need drivers.
How can I run MP350 with Windows 8.1 computer?
It works OK with Windows 7 machine, using drivers from original CD.
Windows 8,1 machine doesn't find those drivers (which I copied to its C drive).
It doesn't find needed drivers on the internet.Hi Larry-R,
I see that you made a later post regarding this. Please refer to the answer on that post regarding your inquiry.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How can I set up the airport extreme base station with windows computer
how can I set up the airport extreme base station with windows computer
Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks
-
How do i have CC on home and work computer with same account?
How do i have CC on home and work computer with same account?
Hi Markofm,
You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to De-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing between which we have for our perpetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
Thanks & Regards,
Sanjeeta -
HT201272 How do I read a purchased book on my computer with Windows 7 OS?
How do I read a purchased book on my computer with Windows 7 OS?
If you mean a book purchased from the iBookstore in the iTunes Store, you can't. iBooks can be viewed only on an iOS device as of right now.
Regards. -
How to make a single payment for different open items with same due date
Hi,
I have created a payment method and selected "Payment per due day " option in payment method company code settings.
Even I have selected that option, Payment will not happen grouping for the items with same due date
for ex : I have two open items with one due date and another open item with another due date so when I am trying performing F110 system should make a single payment for the item with same due date and seperate payment for another item.
But system making single payment for all items
Could you please suggest anything how to make a seperate payment with due date.
Regards
VK GUPTAHi,
Please check Vendor Master data: FK02 ->company code data -> Payment transaction accounting: unflag 'individual payment'.
Make a test and let me know if it's okay.
regards -
How to make the Page UP and down work on a table control screen?
Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
VjTake this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
WHEN 'P--'.
CLEAR ok_code.
PERFORM paging USING 'P--'.
WHEN 'P-'.
CLEAR ok_code.
PERFORM paging USING 'P-'.
WHEN 'P+'.
CLEAR ok_code.
PERFORM paging USING 'P+'.
WHEN 'P++'.
CLEAR ok_code.
PERFORM paging USING 'P++'.
*& Form PAGING
* Form to do scrolling for screen XXXX
* -->CODE OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
j TYPE i.
CASE code.
WHEN 'P--'. <table control name>-top_line = 1.
WHEN 'P-'.
<table control name>-top_line =
<table control name>-top_line - line_count.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
WHEN 'P+'.
i = <table control name>-top_line + line_count.
j = <table control name>-lines - line_count + 1.
IF j LE 0. j = 1. ENDIF.
IF i LE j.
<table control name>-top_line = i.
ELSE.
<table control name>-top_line = j.
ENDIF.
WHEN 'P++'.
<table control name>-top_line =
<table control name>-lines - line_count + 1.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
ENDCASE.
ENDFORM. " PAGING
Regards,
Ravi
Maybe you are looking for
-
How do you find the path to where a document is saved on your computer? In spotlight, you used to be able to hover your mouse over it to see the path but that no longer works. Any help?
-
Hi All, i am using jdev version 11.1.1.5.0 and deployed my Adf application on Apache Tomcat 6.0. in my use case i have created simple adf application using adf business component. create a vo based on eo and drag-drop on jspx page. i have created JND
-
Keynote: Replace Text under Document Warnings Gone?
One of the most critical features I use in Keynote 5.3 on nearly a daily basis is VIEW > SHOW DOCUMENT WARNINGS > REPLACE TEXT for missing fonts. Is this feature gone? I'm in the process of testing out Keynote 6.1 to compile a list of all the bugs an
-
No Home Sharing iTunes 11.0.4.4 Windows 7
I recently replaced the hard drive in my son's laptop, which is running Windows 7. Installed iTunes 11.0.4.4 and dowloaded his purchased items through the cloud with no problem. I turned on home sharing with his apple id, but I can't see any other li
-
My PSE12 will only type CAPITAL letters no matter what font I choose. Started doing this yesterday
My PSE12 will only type CAPITAL letter no matter what font I choose. Started doing this yesterday and I can't get back to having upper and lower case letters.