How to make my screen fullscreen

some how my screen isnt fullscreen and i dont know how to make put it back to how it was before. All my windows and everything are smaller

Ful lscreen window
http://support.apple.com/kb/PH11359

Similar Messages

Can someone tell me how to make my screen full size with Safari ? I am using a Mac osx 10.6.8.

Can someone tell me how to make my screen full size on my Mac OSX 10.6.8. using safari. I know this is a simple question. I have always had it on full screen and recently had it worked on remotely and now I can't get the screen back to full size. I appreciate any advise you can offer. Thank you

from the BetterTouchTool blog, older versions can be obtained using these links:
The last 64bit Snow Leopard (10.6 ) version (v 0.939 ) can be downloaded here
<http://bettertouchtool.net/btt0.939.zip>
If you are using an older 32bit Mac you’ll have to use this version: 0.785
<http://bettertouchtool.net/btt0.785.zip>

How to make full screen on safari

how to make full screen on safari

One way is to download and install Saft - MacUpdate or CNET Downloads.
Or you can click on the green expland gadget in the top right of Safari's titlebar. However, this will not expand Safari to a true full-screen view as will Saft.

How to make color screen in Web dynpro appl?

How to make color screen in Web dynpro appl?

Hi Gobi..
Go thorugh the follwing links
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/forum.jspa%3FforumID%3D52
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
Tutorial
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20edit%20web%20dynpro%20themes.pdf
Setting the Theme
http://help.sap.com/saphelp_nw2004s/helpdata/en/1e/535d420447e054e10000000a155106/content.htm
Configuration
http://help.sap.com/saphelp_nw70/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/content.htm
Regards,
GS
Message was edited by:
Sathishkumar GS
Message was edited by:
Sathishkumar GS

How to make the screen dim while music is playing

I can't get the screen to dim while playing music on my iPod Nano. It used to be that the screen dimmed while music was playing until it lit up when I hit a button to change volume, track, etc. This preserved the battery life. It seems that I inadvertantly changed some setting just a few days ago because I saw the apple logo appear on the screen and since then have not been able to figure out how to make the screen dim while playing music. I think the fact that the screen is staying on while I'm listening now is making the battery out very quickly. Does anyone know how to solve this problem? Thank you!

Hello ZingMA,
You need to reset the backlight timer.
Go to settings, general, and backlight. You should be able to set if from there. I am assuming you have a 6th gen nano. If you have a different model the user manuals have the steps. Found here:
iPod nanos
Hope this helps.
~Julian

My iphone 5's lock button is broken, and i believe its on "curtain mode" siri works ect... but i dont know how to make the screen turn on again

My iphone 5 randomly froze so i used my accesibility button to lock the scre because my lock screen button is broken. After i locked it it wouldn't turn back on. The screen is off but i can still hear notifications and Siri. I dont know how to make it work. help?

See: https://ssl.apple.com/support/iphone5-sleepwakebutton/

How to create executable to run in application and how to make full screen

I am developing an application for running in Desktop.
How should I make a executable so that I can launch application directly ?
Additionally, how to make the stage/scene to full screen throught the code (without explicitly mentioning height and width), because the monitor/display size might vary from model to model.

I don't know if you can make a standalone executable, although there are packagers for Java doing that. I don't know if they are usable with JavaFX. License prohibits to package the runtime, so it must be downloaded on each computer from Sun servers. That's what the JNLP does, I think.
You can also create a shortcut on the desktop with a setting in the JNLP: inside the <information> tag, you can put:
 <shortcut>
 <desktop/>
 </shortcut>to create a shortcut (user is prompted and can decline).

FM OUTLINE_LIST_TCODES , how to make the screen looks bigger

hi guys,
i have used OUTLINE_LIST_TCODES to display 11 selection tabs,it ends up having to scroll down , how to expand the screen and make it bigger without hving to scroll

s

How to make a screen capture

Hello,
I want to make a screen movie of my iPad to tell other people how to use a iPad app.
Does anybody know wether there is an app for this problem?
Best regards.
Erwin.

If you have a PC or a Mac, there is a simple program called Reflection that uses AirPlay to send the iPad display to your computer's screen. You can then use a screen capture application to capture the output.
There are other AirPlay apps available, but Reflection is the one I use.
I wrote a blog article which reviews the app and provides a link to a YouTube video that shows how to set it up and get it going.
http://goo.gl/ZLH9R
It's quite a bit cheaper than HDMI output, and gives fairly good results (although you will need a fast wireless network to get the best results and avoid screen jitters)
I hope this helps

Satellite L300: How to make the screen less blue?

Hi,
Is it possible to make the screen less blue, not fully color managed, just a little warmer. TIA.

Hey Zeb,
Why you want to change the color management? Are not satisfied with the colors on your L300 screen? I have this notebook too and Im very satisfied with the color management. For me its all ok and I dont change anything on it.
Anyway, you can change the colors in graphics driver menu. On Intel cards for example:
Display properties > Settings > Advanced > Intel Graphics > Graphic Properties > Color Correction
Greets

How to make a screen field invisible?

Hi
My problem is the following one : I use th screen painter to create a screen.
I would like one of the screen fields to be invisible for the user but I would like to be able to write and read values in this field using 'C14Z_DYNP_READ_FIELD' and 'DYNP_VALUES_UPDATE'
I tried to set the value of screen-active to 0 in the PBO module but it doesn't solve the problem cause if I do it, I can't specify a value for the field.
Please help,
Kind Regards
Morgan

hi
good
ACTIVE, INPUT, OUTPUT, and INVISIBLE
There are certain hierarchy rules between the components ACTIVE, INPUT, OUTPUT, and INVISIBLE. They also have different effects depending on their respective static settings.
The ACTIVE component has no equivalent in the element attributes. Instead, it changes the components INPUT, OUTPUT, and INVISIBLE.
At the beginning of the PBO, ACTIVE is always set to 1, regardless of the static attribute settings. Setting ACTIVE to 0 automatically sets INPUT = 0, OUTPUT = 0, and INVISIBLE = 1. Any other changes to the settings of INPUT; OUTPUT, and INVISIBLE to the current screen element are ignored. Conversely, setting INPUT = 0, OUTPUT = 0, and INVISIBLE = 1 automatically sets ACTIVE to 0, and any further assignment to ACTIVE for the current screen element will be ignored. The setting ACTIVE = 1 has no other effect on the attributes. The only purpose of the ACTIVE component is to allow you to make a screen field inactive through a single assignment. You should particularly note that a module call linked to a FIELD statement in the screen flow logic is always executed, even when SCREEN-ACTIVE = 0 for the field in question. If you want to prevent a module from being processed for an inactive field, you must specify the FIELD- and MODULE statements separately.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/loop_a03.htm
thanks
mrutyun^

How to make a Screen Optional

Hi All,
Iam working on eCATT using SAP GUI 640 and ECC500.
I have to record a TRansaction FB10.
when i start recording after i login for the first time in a day,it opens first screen of transaction FB10.but when i run the script for the second time it will not open the first screen of the transaction but goes to the second screen of the Transaction.which leads my script fail because it will search for the first screen.
So, is there any posibility to make the screen optional or any solution for the above issue.
I would appreciate if you guys could share your thoughts .
Thanks,
Sarapu.

Hi Rajender,
Double click on the SAPGUI and expand the processed screen and you can see Something like "Active 'X'"
Instead of that 'X' make it 'O' (its O in alphabets not Zero).
But there is a catch here, in many situations you cannot make the first sapgui as optional, coz generally your first SAPGUI has the Reset Flag is set to 'X', if you make it optional, the session is not reset with your transaction.
In such cases, try opening a dummy transaction in the beginning and then proceed with your transaction FB10.
Like open SM30 (initially, do no operations here) and then immediately Give ur Transaction id in the Command Field.
Hope this helps.
PS: Pls award points if this solves your problem.
-Harsha

How to make PDFs open fullscreen in Adobe Acrobat DS on iPad?

Hi,
I'm putting together a corporate interactive PDF, and am struggling to make it open in fullscreen and single page by default on the iPad, despite setting it to do this when exporting. any ideas how to fix this? Thanks.

That is not possible on iOS (and I presume Android) devices.

Hi, I don´t know how to make the screen of my iPad 3 to rotate. I blocked the rotation and I don´t know how to make it rotate again.

How do I unlock the rotation of the screen of my ipad? I want my screen to rotate.
Thanks.
Monica.

1. Make sure the Side Switch is set to Lock Rotation: Settings>General
http://i1224.photobucket.com/albums/ee374/Diavonex/59baf839.jpg
2. Now check the Side Switch to make sure it's in the unlock position
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg

How to make full screen upload to youtube

I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen. please help! than

If your sequence matches your footage eg 16:9 HD and you export using the Youtube preset H264... it should be full screen in all displays.
Please select scale to fill option in the source scaling option in Export window.
Maybe... but I am not sure if thats a solution for a Sequence mismatch or not.
Best to set up correctly first and then see.

How to make my screen fullscreen

Similar Messages

Maybe you are looking for