How to make navigation button for crossing articles...

Hi,
I have 5 different articles in my folio builder.
From the content page, I want to make buttons to go directly assigned page.
I have no problem to make a button to navigate in the pages of article, but have problem to navigate crossing the articles.
I will appreciate if you give me any tip to make it happen.
Thanks!

Depends what kind of archive you've got in mind.
You could just create a page of links which point to your articles.
But the best option in my eyes is to forget Dreamweaver and set up something like a Wordpress site which will automatically archive for you.

Similar Messages

  • How to make a archive for old articles?

    i have finally learne how to build a site but i would like to make a archive for old articals to clean up the site but still be available to any who want to read so would someone point me in the right direction ?
    Dreamweaver cs 5.5

    Depends what kind of archive you've got in mind.
    You could just create a page of links which point to your articles.
    But the best option in my eyes is to forget Dreamweaver and set up something like a Wordpress site which will automatically archive for you.

  • How to disable navigator buttons for editable rowset

    Hi All!
    Is it possible easily to disable delete button for editable rowset?

    Hello Francois,
    Thank you for your fast reply!
    I tried your recommendation, but got the following result:
    When I have a label of "& OK" with the blank symbol as ALT-255, the Button in the Alert Box still has the focus. It seems as if there now is a blank in front of the OK (which is underlined). This does not really solve my issue, because the Button still has the focus and that should not be. The best solution for the user would be if he only could accept the message with a mouse klick.
    Is there an other suggestion?
    Thank you so much!

  • How to make Exit button for Out-of-browser application

    Greetings all,
    This sounds so simple, yet I can't find anything about it.  I want to make an Exit button in a Silverlight 4 Out-of-browser application.  When the user clicks the button, the application is to quit or close or exit.  (The same effect as if the user clicks
    the red X icon in the upper right-hand corner of a window.)
    Any ideas will be appreciated.

    Jonathan --
    Yes, the word Page has taken on many meanings in the last 15 years.  I'll clarify.  When I make a simple Silverlight OOB (out-of-browser) application using Visual Studio 2010, I ask Visual Studio to Add New Item, then choose Silverlight Page.  Let's
    say I name it Page2.xaml.
    By default VS2010 already made another page for me, MainPage.xaml.
    Now, here is my need:  On the page called MainPage.xaml, I want to place a large button that says Exit Application.  When the user clicks that button, I want the application to end and the entire window to close.  This is the standard behavior in most traditional Windows
    applications, for example in Microsoft Word or Microsoft Excel or Microsoft Access.  In any of those traditional applications, the user can, from the menu, choose File/Exit.  If he does, then not only does the application quit, but also the window
    closes itself.  The user doesn't have to click the small red X icon in the upper right corner. 
    That simple behavior of almost all traditional Windows applications, large and small, is what I'm looking for in my simple Silverlight
    OOB applications:  An Exit command that quits the application and closes the window itself.
     Sorry for the confusion.  I really appreciate your help.  Any ideas?

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • How to make a form for input in web interface builder

    Hi expert:
        How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to  draw lines and checkboxes . Thanks in advance.
    Allen

    WAD:
    Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
    You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
    Query Designer:
    Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
    This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
    Srikant

  • How to make the buttons INVISIBLE in the Application toolbar

    Hi All,
    I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
    Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
    I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
    or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
    Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
    Thank you in advance.
    Regards.
    Paddu.

    Hi,
    Try to use below in the PBO module status_0100 OUTPUT.
    DATA t_fcode TYPE TABLE OF sy-ucomm.
    refresh t_fcode[].
    APPEND 'Function code name of the button' TO t_fcode. 
    Check the condition here for which you want to make field visible.
        DELETE FCODE of the button from T_FCODE table
      ENDIF.
      SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

  • How to make a Button to work Actively even if there is a mandatory field..?

    Hi All..
    How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
    I am badly in need of this logic, as i have to incorporate in my code..
    Points will be rewarded without fail..

    Hi Pavan,
    I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:  s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
    SELECT-OPTIONS:  s_panid FOR zoindex_val-zopanid.
    SELECT-OPTIONS:  s_effdat FOR zoexchrate-zedate.
    SELECTION-SCREEN END OF BLOCK b2.
    *-- AT SELECTION-SCREEN
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
    *-- Obligatory Country Code
      IF s_land1[] IS INITIAL.
        MESSAGE e050 WITH text-050.
                     "Please select the Country Code
      ENDIF.
    So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
    Hope this would help u in some way. Please do reward the helpful answers.

  • How to make "Utility" button in Printer Setup Utility available

    There, i add a printer in the Printer Setup Utility and select it. i want to open printer utility, but the "Utility"
    button in Printer Setup Utility is dimmed. In addition,
    "Printer\Configure printer" in the Printer Setup Utility menu is also dimmed.
    How to make "Utility" button in Printer Setup Utility available?
    Thanks in advance.

    Hi Jiong,
    That button is to acess the printer utility for that particular printer, not all printers come with a utility. If you have the disk that came with your printer, you can see if it has a Macintosh driver, if it does then it mimght have the utility with it. It's pretty hard to run the utility on its own, its burried somewhere in the system so that's why you have that menu item. You can alternatively go on the internet and download the latest driver, which might have a utility. All the utility will do will give you options to check nozzle patterns, alighnement, ink tank levels, and cleaning options - just mimnor maintenence junk, non-essentials, etc. I think Tiger just comes with a whole heap of generic drivers for different printer lines, can't say for sure.
    I wouldn't worry about it, especially if you have a relatively old printer.
    Hope that helps
    DKR

  • How to make a button load a sprite from library??

    PLEASE HELP!!
    Hey everyone.. iv been looking for help for a few weeks but cant seem to find the awnsers
    I am trying to create a newspaper that consists of four pages. Each   page i have created and are sitting in the library as sprites. Each page   has buttons that need linking so that when pressed it loads the next   page or page that i want. This is the part i am confused with =/ how do i   make the buttons on each page load the next page (sprite) from the   library??
    Basically i want to no how to make a button load a sprite from the library when clicked. Does anyone no the script for this?
    Thanks for any help

    A question arises as to whether or not you are posting in the right forum.  Sprites are AS3 objects.
    If you want to add movieclips to the stage from the library using AS2, then you need to assign them each an Identifier via right clicking them in the library and selecting the Linkage option... from there you slect the option to Export for Actionscript and then assign the Identifier.
    You then use the attachMovie() method to make use of that Identifier to dynamically load the library object.

  • HOW TO MAKE ROUND BUTTON

    HI PLS TELL ME HOW TO MAKE ROUND BUTTON ON FORM.

    Rounded end buttons (e.g. Oracle Look and feel) are do-able in both 6i and 9i using PJCs in the 9i demos see the rollover button example, in 6i I seem to remember that there is a RoundedButton sample in the demos.
    Both sets of demos can be downloaded from http://otn.oracle.com/products/forms.
    If you want circular buttons then you'd have to use an Image for that.

  • How to make a group for selectd Object javascript

    How to make a group for selectd Object javascript

    There is currently no native way to email groups from iPad.
    The only way to do this is if your recipients are already members a a distribution group controlled elsewhere such as a Google Group or an  Exchange Organisation, then you can email the distribution group address which will then in turn forward to the individual email address of the members.
    Does it have to be email as currently you would have to add each recipient to the email manually.
    iOS to my knowledge doesn't support contact groups in context other than organisation.

  • How to make S-Curve for Primavear P6 by using BI publisher?

    Hi,
    Anyone knows how to make S-Curve for Primavear P6 by using BI publisher? I can display colunm such as planned unit, but not cumulative value. So I can't plot S-curve.
    Thanks
    Wang Xin
    Edited by: 957906 on 09-Sep-2012 03:26

    The problem with the datagridview is that it can only show one table.
    For more tables 3th party datagrid's are better. 
    Although you can start with using the old datagrid. Despite what is written on MSDN is it a complete different control then the datagridview. You can add in to your toolbox by right clicking on it and then add it.
    The datasource of a DataGrid can be a complete dataset which is showed with all its relations.
    Success
    Cor

  • How to make a CheckBox for a report parameter?

    Hi,
    How to make a CheckBox for a report parameter?
    thanx

    design ur parameters forms using forms and call ur report form there

  • How to make a installer for iphone application

    hi, dear all, I have made a iphone application by XCode , it can running perfect on emulator . I want it can be install on real device , how to do it ? how to make a installer for my iphone application ?
    thanks to your response .

    If you go to the iPhone DEV area on Apple.com you can get a installer app once you are a developer. This installer will let you use apps for your own use. This installer app also supports up to X amount of phones you can install the application on. I thought it was set at 100 but could be now up to 500.

Maybe you are looking for