How to make nonbreaking space and/or hyphen
I'm trying to figure out how to to make a nonbreaking space and/or hyphen in dynamic textfields in AS2 (specifically with CS4 publishing to Flash player 7 or 8).
I just tried the new TLF textfields in CS5 and I was able to use & #160 and & #8209, but that requires publishing to AS3 and Flash 10. Those codes don't seem to work for the classic textfields.
I've also tried & nbsp; but that didn't work.
Anybody have some other way?
Kara,
You may see whether you can get close enough with this:
1) Cut the rectangle at the lower corners with the Scissors Tool;
2) With the bottom side path selected, Effect>Distort & Transform>Roughen with Smooth Points and trying out the other vaues to get the desired look if possible;
3) Object>Expand Appearance, Ungroup and delete the unwanted nostroke/nofill path;
4) Join the paths into one.
Save for Web as PNG24 (or GIF if you must) to have the transparency (and crispness).
Similar Messages
-
How to make Sales group and office field mandatory in VA01 first screen
hi gurus,
can anybody tell me how to make Sales group and sales office mandatory field on VA01 tcode first screen. i have requirement to make it compulsary on the first screen otherwise they wont be able to goto next screen.
will reward points for sure
thanks
mandyHi! Mandy,
Try using t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry required by you make the necessary changes(Output only, invisible or required) and save.
The system will prompt to assign a package and request enter the necessary values.
Provide your feedback.
Regards,
PATHIK -
How to make the dblink and what is the use of this
plz any body tell me "how to make the dblink and what is the use of this"
sujitDo you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed. -
Hi,
How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
Note : I have created custom Content Type since I have custom columns along with upload column..
Regards, Shreyas R Sgo to library settings
Change new button order and default content type
set your custom content type to be #1
when you upload new document it will automatically have your custom content type
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010 -
How to make your iPad and iPhone commicate with each other
How to make your iPad and iPhone commicate with each other
this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD -
I have been writing on - Pages- app for several years. Pages automatically uses double space between paragraphs. I can not figure out how to make single space between paragraphs. Tried everything. Please help!
Pages User Guide > http://manuals.info.apple.com/en_US/Pages_UserGuide.pdf
Open the user guide then press Command + F on your keyboard.
Type line spacing in the search field top right corner of that window. -
How to make own editor and call it?
could you please tell me how to make own editor and call it on a clicking of a push button corresponding to an test Item
In the Object Navigator... just click on the 'Editor' Node and press the '+' (Create) button....
Set then any properties as you like....
So simple...
Greetings,
Sim -
How to make an ebook and sell it on the ibook or app store??
How to make an ebook and sell it on the ibook or app store??
Can anybody help me please T^T
By the way I'm in Thailand and want to sell my ebook around the world.
This is my dream ^^.. Help me please...Hi,
Start with the ADC iOS dev center here.
http://developer.apple.com/devcenter/ios/index.action
Carolyn -
How to make an before and after effects?
So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
How to make it?
Thanks:)Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking. -
HT1420 How to make Apple ID and iCloud the same Id?
How to make Apple ID and iCloud ID the same after they have been created?
iTunes keeps asking for ID and passwords that were created differently.You can't im afraid. I wanted to do the same and got the following from Apple:
I am sorry, you cannot update your email address to MobileMe address as each Apple ID is unique.
Ross, I would like to let you know that, you cannot change your Apple ID if it was at any time a .Mac or MobileMe email address, even if your subscription has ended or been canceled.
The email address that ends in .me is already an Apple ID as well, as when you set up a MobileMe email its automatically set up as an Apple ID. So you cannot use this email address on another account. It is permanently associated with your MobileMe Apple ID.
This article provides helpful information when choosing which Apple ID to use with iCloud:
Apple IDs and iCloud
http://support.apple.com/kb/HT4895
This page also covers topics such as moving MobileMe accounts to iCloud, managing your Apple ID, and how to get content purchased with multiple Apple IDs onto your iOS device.
I hope this information was helpful. If you require further assistance, please do not hesitate to reply to this email and I will be more than happy to assist you further.
Sincerely,
Thenmozhi
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I wrote back and tried to escialte the issue but got no where. The whole thing is very disappointing and I hope Apple sort it out eventually. -
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit -
How to make more space avilable on strt-up disk?
I've just started burning DVDs on iDVD, using movies I have produced in iMovie and then transferred, via the Media Browser. But when I come to burn the finished product I am severely limited. The 'help" article informs me "be sure you have at least twice as much free space as your project uses available on your hard disk ... eg. if your project uses 4GB, you need at least 8GB of free space on your hard disk. I checked via control-click onto my hard disk icon how much space I have. The capacity is 148GB of which only 938MB is available! Does this mean I can never burn a DVD with more than 469 MB content (i.e 50% of the total)? If so, how can I make more space available on my start-up disk?
You could free-up nearly 2 GB by deleting two "bloatware" items:
/Applications/Office 2004 for Mac Test Drive
/Applications/iWork '08 ... (the 'free trial' version)
On my system, they're 1001568 KB and 701940 KB, respectively.
If you don't use them, iWeb.app and GarageBand.app are also
very large (345344 KB and 187056 KB). If you delete them, you
can always restore them later from the install DVDs.
Looby -
How to make components appear and disappear dynamically.
So I admit I am from the HTML world and have been able to
dynamically control divs to make them visible and invisible, as
needed. How do you do that in Flex/Flash?
I have tried the "visible" attribute, but the component takes
up the same space when invisible leaving a big hole in the page --
very surprising. I have changed the height and width to zero (which
works) but have not been able to restore the size (since I want it
to be width=100% and it is expecting a number, not percentage.
So how do you implement hidden divs in Flex.
Thanks.
MikeIn Flex, there is a separation between "is this component
visible" vs. "does this component take screen space." Similar to
the difference in CSS between "mydiv.style.visibility = 'hidden'"
and "mydiv.style.display = 'none'".
In Flex:
// make it invisible
mything.visible = false;
// make it not take up space onscreen
mything.includeInLayout = false; -
How to make free space on your start up disk
Hey!
I'm experiencing some problems with my MacBook Pro. Everytime I'm trying to save something or downloading something, it say my start up disk is almost full. And sometimes it tells me I have to quit applications to make space.
How can I make free space, I mean, I can't have used all the memory on my computer already, I've only had it for a year. I'm guessing I've got a file that's taking up a lot of space. How can I identify it? And how can I make free space on my start up disk?
Thanks for the help,
leozinho2rDownload and use either WhatSize or Omni Disk Sweeper to see what files are filling your drive. Trash them if you don't need them.
-
How to make storage space on my iPhone 5?
There is not enough storage space to download the new software.How do I make room on my iPhone?
Hey Happy Clappy Hippy,
Thanks for the question. After reviewing your post, it sounds like you need to make some roomon they iPhone. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
You can see what things are taking up space and remove them if you want to.
Understanding iOS device capacity
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
[SOLVED]After yesterday's upgrade screen problem
So, yesterday i have upgraded to the newest kernel and udev. Now, the problem is that (i have XFCE) when laptop goes into "switch off screen" mode (in xfce4-power-manager) i cannot recall the screen back to normal (it remains black). I have to suspen
-
Need help in developing a spreadsheet for my golf group using the USGA system for handicapping? Has anybody done this?
-
How do I transfer purchased apps from one Apple ID account to another?
I noticed I was purchasing apps on my iphone using a different Apple ID. Both use the same email address. Here is what I want to do: 1. Which account is older? I don't remember which Apple ID I registered when I purchased my iPhone. How can I fin
-
HT4528 Why doesn't my internet and apps work when I'm in my wifi?
So this has happened to me once before but kinda just started working and now it's doing it to me again. When I'm in wifi nothing on my phone will work except texting and phone calls. I can not use the internet or any of my apps, even when I went int
-
hi, Is there any FM available in smartforms which performs the functionality similar to start_form in SAP scripts. Thanks & Regards sandhya