How to make none root user to connect to TCP Port (web ports)
how to make none root user (any user)
to connect to TCP Port 80 or port 81 or any port less than 1024
cause i have web server i want to run and stop service with none root userand on port 80 and port 81
can you help me and give me steps
I believe Solaris 9 also has RBAC control. If so then all you need to do is present the uid with the PRIV_NET_PRIVADDR privilege. See the privielegs(5) manpage for more information on the subject.
This privilege will allow the userid to bind to ports < 1024. You can give a user this privilege either by using usermod (you will probably need the auth_attr(4) manpage as well) after which you need to login again. Or you can try using ppriv to modify the privileges on the users shell.
Similar Messages
-
How to restrict non root users from changing proxy settings Ubuntu 12.04?
I have two Ubuntu 12.04 Desktops with Ncomputing vSpace software configured for remote terminal users of Ncomputing L300 thin clients. Both these desktops have Squid configured and connected to internet. So in a way users logging in to these machines can directly access internet without squid. Now users can remove the proxy and have unrestricted access anytime. Which is the reason I want to enforce proxy on users settings which they cannot change. I am fine if the settings makes it mandatory for root or sudo user of Ubuntu. Is this possible ?
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/ -
Mounting usb devices as non-root user ??
How can a non-root user mount a usb flash device?
As root, the device is mounted as:
mount -F pcfs /dev/dsk/c1tod0s2:c /mnt
The vfstab entry for this is as follows:
/dev/dsk/c1t0d0s2:c /dev/rdsk/c1t0d0s2 /flash pcfs 2 no -
This is running Solaris 8 on a SunBlade150Hello.
I had the same problem.
If you do not have root rights on the computer the answer is: You cannot mount the device.
I had root access and I wrote a C program that (un-)mounted all possible device files (the "s2" devices as well as the "s2:c" devices because some flash devices come without partition table).
I chowned the file to root and set the "set effective user ID" bit in the file's permissions using chmod after logging in as root - so any user can start the program.
I think this is the most flexible variant because USB devices sometimes are assigned other device names.
Martin -
Unable to make a transparent connection from non root user
Hi
I am trying to make a transparent connection from a non-root user and I am having permission denied when trying to generate ssh keys, as per below:
$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/global/xnode/taprap/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
open /global/xnode/taprap/.ssh/id_rsa failed: Permission denied.
Saving the key failed: /global/xnode/taprap/.ssh/id_rsa.
Its working fine as root user, but not for any other user.
Please can you help
FRHi
for /global/xnode/taprap I have:
drwxrwxrwx 35 taprap other 59904 Sep 30 10:35 taprap
and for the .ssh
ls -al .ssh
total 122
drwx------ 2 105 other 512 Jan 27 2009 .
drwxrwxrwx 35 taprap other 59904 Sep 30 10:45 ..
-rw-r--r-- 1 105 other 440 May 3 2010 known_hosts
ls -al /.ssh/id_rsa
-rw------- 1 root root 883 Mar 15 2011 /.ssh/id_rsa -
How to create a domain for a non-root user using the JES installer
Some questions have been circulating on what are the steps to create a whole domain configuration using a non-root user. Here is one method that you can try....
- Login as user "testuser", all operations are using the user I want to start the whole domain with
- cd to the testuser home directory and created apptest (mkdir apptest)
-created domain
/opt/SUNWappserver/appserver/bin/asadmin create-domain adminuser admin adminport 4849 --domaindir /testuser/apptest testdomain
Please enter adminpassword>adminadmin
Please enter adminpassword again>adminadmin
Please enter the master password>adminadmin
Please enter the master password again>adminadmin
- created nodeagent
/opt/SUNWappserver/appserver/bin/asadmin create-node-agent user admin port 4849 password adminadmin agentdir /testuser/apptest testnode
Please enter the master password>adminadmin
- Start the domain
/opt/SUNWappserver/appserver/bin/asadmin start-domain domaindir /testuser/apptest user admin testdomain
Please enter password>adminadmin
Please enter the master password>adminadmin
Domain testdomain started.
- Start the nodeagent
/opt/SUNWappserver/appserver/bin/asadmin start-node-agent user admin agentdir /testuser/apptest/ testnode
Please enter password>adminadmin
Please enter the master password>adminadmin
Command start-node-agent executed successfully.
- create instance
/opt/SUNWappserver/appserver/bin/asadmin create-instance nodeagent testnode user admin i1
Please enter password>adminadmin
Command create-instance executed successfully.
- start instance
/opt/SUNWappserver/appserver/bin/asadmin start-instance --user admin i1
Please enter password>adminadmin
Command start-instance executed successfully.And this can be used to the incident priority (same technique can be used for problems):
private int GetIncidentPriority(EnterpriseManagementGroup emg)
try
//Get the incident settings class
ManagementPackClass mpc = emg.EntityTypes.GetClass(new Guid("613c9f3e-9b94-1fef-4088-16c33bfd0be1"));
//Get the emo for the incident settings
EnterpriseManagementObject emo = emg.EntityObjects.GetObject<EnterpriseManagementObject>(mpc.Id, ObjectQueryOptions.Default);
//Get the priority maxtrix and convert to XML
if (emo[mpc, "PriorityMatrix"].Value != null && emo[mpc, "PriorityMatrix"].Value.ToString() != "")
string sMatrixXML = emo[mpc, "PriorityMatrix"].Value.ToString();
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.LoadXml(sMatrixXML);
//Get the guid strings for impact and urgency (note - xml goes by urgency then impact)
string sUrgencyGuid = "04b28bfb-8898-9af3-009b-979e58837852";
string sImpactGuid = "11756265-f18e-e090-eed2-3aa923a4c872";
foreach (XmlNode urgencynode in xmlDoc.ChildNodes[0].ChildNodes)
if (urgencynode.Attributes.Count == 1 && urgencynode.Attributes["Id"].Value.ToString().ToLower() == sUrgencyGuid)
foreach (XmlNode impactnode in urgencynode.ChildNodes)
if (impactnode.Attributes.Count == 1 && impactnode.Attributes["Id"].Value.ToString().ToLower() == sImpactGuid)
XmlNode prioritynode = impactnode.ChildNodes[0];
return Convert.ToInt32(prioritynode.InnerXml);
return 0;
catch
return 0;
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click
here -
How to make site root-relative links work in DW and Server both?
See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
/images/img_book/WScover120x150_NEW.jpg
Design veiw in DW: broken (grey w/ broken icon)
Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
Browser: good
Ease of switching: n/a (existing format)
"new style" site root relative link
/public_html/images/img_book/WScover120x150_NEW.jpg
Design veiw in DW: good
Link check in DW: good
Browser: broken
Ease of switching: easy
Document relative link
../../images/img_book/WScover120x150_NEW.jpg
Design veiw in DW: good
Link check in DW: good
Browser: good
Ease of switching: hard (how to automate?)
Absolute link
http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
Design veiw in DW: broken (grey w/ broken icon)
Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
Browser: good
Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative? -
IdM 8.1: Problems to provision Solaris 10 with non root user.
Hello
When IdM 8.1 tries to create a user into Solaris 10 I got this Error:
com.waveset.util.WavesetException: An error occurred adding user 'testSolaris' to resource 'Test_Solaris'. com.waveset.util.WavesetException: Script failed waiting for "_,)#(:" in response "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request en...roblem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly " com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly ".+
*The non root user has the privileges that describes the IdM documentation. This error doesn't occure when the connection user is root.*
*What's wrong?*The non - root doesn't work yet. I try to use a user with SUDO = TRUE but I got this error when I Test the connection:
Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "++_,)#+(:".+
I haver already configured the parameter tty_tickets to TRUE and the sudoers file as following:
+# sudoers file.+
+#+
+# This file MUST be edited with the 'visudo' command as root.+
+#+
+# See the sudoers man page for the details on how to write a sudoers file.+
+#+
++Defaults syslog=auth+
Defaults:idm_sudo tty_tickets
root ALL=(ALL) ALL
idm_sudo ALL = NOPASSWD: /usr/bin/auths,/usr/sbin/groupadd,/usr/sbin/groupdel,/usr/sbin/groupmod,/usr/bin/last,/usr/bin/listusers,/usr/bin/logins,/usr/bin/passwd,/usr/bin/profiles,
+/usr/bin/roles,/usr/sbin/useradd,/usr/sbin/userdel,/usr/sbin/usermod,/usr/bin/awk,/usr/bin/cat,/usr/bin/chmod,/usr/bin/chown,/usr/bin/cp,/usr/bin/cut,/usr/bin/diff,/usr/bin/echo,+
+/usr/bin/grep,/usr/bin/ls,/usr/bin/mv,/usr/bin/rm,/usr/bin/sed,/usr/bin/sleep,/usr/bin/sort,/usr/bin/tail,/usr/bin/touch,/usr/bin/which+
What's wrong? -
[SOLVED] Xorg not starting on non-root user [My First Linux]
Hello, I recently turned back to linux after digging up my old ASUS EEE 900a, which I messed up with partitioning fun after trying to cram Windows XP on it and etc. Anyways, I managed to fix it, and after Ubuntu being too big, I was turned on to Arch as a good distro, and I've been having a very good time setting everything up so far.
Anyways: My issue arises after needing to use a different user in order to use Chrome. I created a new account and tried to run startx like I usually do. It spat out the usual few lines, but failed and gave me this log:
[ 4616.974]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4616.974] X Protocol Version 11, Revision 0
[ 4616.974] Build Operating System: Linux 3.8.7-1-ARCH i686
[ 4616.974] Current Operating System: Linux archieee 3.9.4-1-ARCH #1 SMP PREEMPT Sun May 26 11:56:48 CEST 2013 i686
[ 4616.975] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 4616.975] Build Date: 17 April 2013 02:43:06PM
[ 4616.975]
[ 4616.975] Current version of pixman: 0.30.0
[ 4616.975] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4616.975] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4616.977] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 4 21:56:02 2013
[ 4616.977] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4616.978] (==) No Layout section. Using the first Screen section.
[ 4616.978] (==) No screen section available. Using defaults.
[ 4616.978] (**) |-->Screen "Default Screen Section" (0)
[ 4616.978] (**) | |-->Monitor "<default monitor>"
[ 4616.978] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4616.978] (==) Automatically adding devices
[ 4616.978] (==) Automatically enabling devices
[ 4616.978] (==) Automatically adding GPU devices
[ 4616.978] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4616.978] Entry deleted from font path.
[ 4616.978] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4616.978] Entry deleted from font path.
[ 4616.978] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4616.979] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4616.979] Entry deleted from font path.
[ 4616.979] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4616.979] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 4616.979] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4616.979] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4616.979] (II) Loader magic: 0x8258620
[ 4616.979] (II) Module ABI versions:
[ 4616.979] X.Org ANSI C Emulation: 0.4
[ 4616.979] X.Org Video Driver: 14.1
[ 4616.979] X.Org XInput driver : 19.1
[ 4616.979] X.Org Server Extension : 7.0
[ 4616.980] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4616.983] (--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 rev 3, Mem @ 0xf3e00000/524288, 0xd0000000/268435456, 0xf3dc0000/262144, I/O @ 0x0000cc00/8
[ 4616.983] (--) PCI: (0:0:2:1) 8086:27a6:1043:8340 rev 3, Mem @ 0xf3e80000/524288
[ 4616.983] Initializing built-in extension Generic Event Extension
[ 4616.983] Initializing built-in extension SHAPE
[ 4616.984] Initializing built-in extension MIT-SHM
[ 4616.984] Initializing built-in extension XInputExtension
[ 4616.984] Initializing built-in extension XTEST
[ 4616.984] Initializing built-in extension BIG-REQUESTS
[ 4616.984] Initializing built-in extension SYNC
[ 4616.984] Initializing built-in extension XKEYBOARD
[ 4616.984] Initializing built-in extension XC-MISC
[ 4616.985] Initializing built-in extension SECURITY
[ 4616.985] Initializing built-in extension XINERAMA
[ 4616.987] Initializing built-in extension XFIXES
[ 4616.990] Initializing built-in extension RENDER
[ 4616.993] Initializing built-in extension RANDR
[ 4616.995] Initializing built-in extension COMPOSITE
[ 4616.998] Initializing built-in extension DAMAGE
[ 4617.000] Initializing built-in extension MIT-SCREEN-SAVER
[ 4617.003] Initializing built-in extension DOUBLE-BUFFER
[ 4617.005] Initializing built-in extension RECORD
[ 4617.007] Initializing built-in extension DPMS
[ 4617.010] Initializing built-in extension X-Resource
[ 4617.012] Initializing built-in extension XVideo
[ 4617.015] Initializing built-in extension XVideo-MotionCompensation
[ 4617.017] Initializing built-in extension XFree86-VidModeExtension
[ 4617.019] Initializing built-in extension XFree86-DGA
[ 4617.021] Initializing built-in extension XFree86-DRI
[ 4617.023] Initializing built-in extension DRI2
[ 4617.023] (II) LoadModule: "glx"
[ 4617.024] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4617.024] (II) Module glx: vendor="X.Org Foundation"
[ 4617.024] compiled for 1.14.1, module version = 1.0.0
[ 4617.024] ABI class: X.Org Server Extension, version 7.0
[ 4617.024] (==) AIGLX enabled
[ 4617.026] Loading extension GLX
[ 4617.026] (==) Matched intel as autoconfigured driver 0
[ 4617.026] (==) Matched intel as autoconfigured driver 1
[ 4617.026] (==) Matched vesa as autoconfigured driver 2
[ 4617.026] (==) Matched modesetting as autoconfigured driver 3
[ 4617.026] (==) Matched fbdev as autoconfigured driver 4
[ 4617.026] (==) Assigned the driver to the xf86ConfigLayout
[ 4617.026] (II) LoadModule: "intel"
[ 4617.026] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4617.027] (II) Module intel: vendor="X.Org Foundation"
[ 4617.027] compiled for 1.14.1, module version = 2.21.8
[ 4617.027] Module class: X.Org Video Driver
[ 4617.027] ABI class: X.Org Video Driver, version 14.1
[ 4617.027] (II) LoadModule: "vesa"
[ 4617.027] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4617.028] (II) Module vesa: vendor="X.Org Foundation"
[ 4617.028] compiled for 1.14.0, module version = 2.3.2
[ 4617.028] Module class: X.Org Video Driver
[ 4617.028] ABI class: X.Org Video Driver, version 14.1
[ 4617.028] (II) LoadModule: "modesetting"
[ 4617.029] (WW) Warning, couldn't open module modesetting
[ 4617.029] (II) UnloadModule: "modesetting"
[ 4617.029] (II) Unloading modesetting
[ 4617.029] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4617.029] (II) LoadModule: "fbdev"
[ 4617.029] (WW) Warning, couldn't open module fbdev
[ 4617.029] (II) UnloadModule: "fbdev"
[ 4617.030] (II) Unloading fbdev
[ 4617.030] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4617.030] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT3), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT3), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell (GT1), Haswell (GT2), Haswell (GT3),
Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2),
Haswell SDV Desktop (GT3), Haswell SDV Mobile (GT1),
Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT3),
Haswell SDV Server (GT1), Haswell SDV Server (GT2),
Haswell SDV Server (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell SDV (GT1), Haswell SDV (GT2),
Haswell SDV (GT3), Haswell ULT Desktop (GT1),
Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT3),
Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2),
Haswell ULT Mobile (GT3), Haswell ULT Server (GT1),
Haswell ULT Server (GT2), Haswell ULT Server (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell ULT (GT1), Haswell ULT (GT2), Haswell ULT (GT3),
Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2),
Haswell CRW Desktop (GT3), Haswell CRW Mobile (GT1),
Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT3),
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Haswell CRW Server (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), Haswell CRW (GT1), Haswell CRW (GT2),
Haswell CRW (GT3), ValleyView PO board
[ 4617.032] (II) VESA: driver for VESA chipsets: vesa
[ 4617.032] (++) using VT number 1
[ 4617.033] (WW) Falling back to old probe method for vesa
[ 4617.033] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4617.034] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4617.034] (==) intel(0): RGB weight 888
[ 4617.034] (==) intel(0): Default visual is TrueColor
[ 4617.034] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 4617.034] (**) intel(0): Relaxed fencing disabled
[ 4617.034] (**) intel(0): Wait on SwapBuffers? enabled
[ 4617.034] (**) intel(0): Triple buffering? enabled
[ 4617.034] (**) intel(0): Framebuffer tiled
[ 4617.034] (**) intel(0): Pixmaps tiled
[ 4617.034] (**) intel(0): 3D buffers tiled
[ 4617.034] (**) intel(0): SwapBuffers wait enabled
[ 4617.034] (==) intel(0): video overlay key set to 0x101fe
[ 4617.034] (II) intel(0): Output LVDS1 has no monitor section
[ 4617.035] (--) intel(0): found backlight control interface /sys/class/backlight/eeepc
[ 4617.066] (II) intel(0): Output VGA1 has no monitor section
[ 4617.067] (II) intel(0): EDID for output LVDS1
[ 4617.067] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.067] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4617.068] (II) intel(0): Printing probed modes for output LVDS1
[ 4617.068] (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1077 1112 1200 600 604 609 625 -hsync -vsync (37.5 kHz P)
[ 4617.068] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4617.068] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4617.068] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4617.100] (II) intel(0): EDID for output VGA1
[ 4617.100] (II) intel(0): Output LVDS1 connected
[ 4617.100] (II) intel(0): Output VGA1 disconnected
[ 4617.100] (II) intel(0): Using exact sizes for initial modes
[ 4617.100] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 4617.100] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4617.100] (II) intel(0): Kernel page flipping support detected, enabling
[ 4617.100] (==) intel(0): DPI set to (96, 96)
[ 4617.100] (II) Loading sub module "fb"
[ 4617.100] (II) LoadModule: "fb"
[ 4617.101] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4617.102] (II) Module fb: vendor="X.Org Foundation"
[ 4617.103] compiled for 1.14.1, module version = 1.0.0
[ 4617.103] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4617.103] (II) Loading sub module "dri2"
[ 4617.103] (II) LoadModule: "dri2"
[ 4617.103] (II) Module "dri2" already built-in
[ 4617.103] (II) UnloadModule: "vesa"
[ 4617.103] (II) Unloading vesa
[ 4617.103] (==) Depth 24 pixmap format is 32 bpp
[ 4617.104] (II) intel(0): [DRI2] Setup complete
[ 4617.104] (II) intel(0): [DRI2] DRI driver: i915
[ 4617.104] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 4617.104] (II) UXA(0): Driver registered support for the following operations:
[ 4617.104] (II) solid
[ 4617.104] (II) copy
[ 4617.104] (II) composite (RENDER acceleration)
[ 4617.104] (II) put_image
[ 4617.105] (II) get_image
[ 4617.105] (==) intel(0): Backing store disabled
[ 4617.105] (==) intel(0): Silken mouse enabled
[ 4617.105] (II) intel(0): Initializing HW Cursor
[ 4617.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4617.113] (==) intel(0): DPMS enabled
[ 4617.113] (==) intel(0): Intel XvMC decoder disabled
[ 4617.113] (II) intel(0): Set up textured video
[ 4617.113] (II) intel(0): Set up overlay video
[ 4617.113] (II) intel(0): direct rendering: DRI2 Enabled
[ 4617.113] (==) intel(0): hotplug detection: "enabled"
[ 4617.123] (--) RandR disabled
[ 4617.160] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4617.160] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context
[ 4617.160] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4617.160] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4617.160] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4617.160] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4617.160] (II) AIGLX: Loaded and initialized i915
[ 4617.160] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4617.162] (II) intel(0): Setting screen physical size to 270 x 158
[ 4617.278] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4617.278] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.278] (II) LoadModule: "evdev"
[ 4617.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4617.279] (II) Module evdev: vendor="X.Org Foundation"
[ 4617.279] compiled for 1.14.0, module version = 2.8.0
[ 4617.279] Module class: X.Org XInput Driver
[ 4617.279] ABI class: X.Org XInput driver, version 19.1
[ 4617.279] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.279] (**) Power Button: always reports core events
[ 4617.279] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4617.279] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.279] (--) evdev: Power Button: Found keys
[ 4617.279] (II) evdev: Power Button: Configuring as keyboard
[ 4617.279] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4617.279] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4617.279] (**) Option "xkb_rules" "evdev"
[ 4617.280] (**) Option "xkb_model" "evdev"
[ 4617.280] (**) Option "xkb_layout" "us"
[ 4617.363] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 4617.363] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4617.363] (II) Using input driver 'evdev' for 'Video Bus'
[ 4617.363] (**) Video Bus: always reports core events
[ 4617.363] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 4617.363] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4617.364] (--) evdev: Video Bus: Found keys
[ 4617.364] (II) evdev: Video Bus: Configuring as keyboard
[ 4617.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[ 4617.364] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4617.364] (**) Option "xkb_rules" "evdev"
[ 4617.364] (**) Option "xkb_model" "evdev"
[ 4617.364] (**) Option "xkb_layout" "us"
[ 4617.365] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4617.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4617.365] (II) Using input driver 'evdev' for 'Power Button'
[ 4617.366] (**) Power Button: always reports core events
[ 4617.366] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4617.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4617.366] (--) evdev: Power Button: Found keys
[ 4617.366] (II) evdev: Power Button: Configuring as keyboard
[ 4617.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 4617.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4617.366] (**) Option "xkb_rules" "evdev"
[ 4617.366] (**) Option "xkb_model" "evdev"
[ 4617.366] (**) Option "xkb_layout" "us"
[ 4617.368] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4617.368] (II) No input driver specified, ignoring this device.
[ 4617.368] (II) This device may have been added with another device file.
[ 4617.369] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4617.369] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4617.369] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4617.369] (**) Sleep Button: always reports core events
[ 4617.369] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4617.369] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4617.369] (--) evdev: Sleep Button: Found keys
[ 4617.369] (II) evdev: Sleep Button: Configuring as keyboard
[ 4617.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 4617.369] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4617.369] (**) Option "xkb_rules" "evdev"
[ 4617.369] (**) Option "xkb_model" "evdev"
[ 4617.369] (**) Option "xkb_layout" "us"
[ 4617.370] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4617.371] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.372] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 4617.372] (II) No input driver specified, ignoring this device.
[ 4617.372] (II) This device may have been added with another device file.
[ 4617.373] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event5)
[ 4617.373] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 4617.373] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[ 4617.373] (**) Asus EeePC extra buttons: always reports core events
[ 4617.373] (**) evdev: Asus EeePC extra buttons: Device: "/dev/input/event5"
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Vendor 0 Product 0
[ 4617.374] (--) evdev: Asus EeePC extra buttons: Found keys
[ 4617.374] (II) evdev: Asus EeePC extra buttons: Configuring as keyboard
[ 4617.374] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input5/event5"
[ 4617.374] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD, id 10)
[ 4617.374] (**) Option "xkb_rules" "evdev"
[ 4617.374] (**) Option "xkb_model" "evdev"
[ 4617.374] (**) Option "xkb_layout" "us"
[ 4617.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4617.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4617.376] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4617.376] (**) AT Translated Set 2 keyboard: always reports core events
[ 4617.376] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4617.376] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4617.376] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4617.376] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4617.376] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 4617.376] (**) Option "xkb_rules" "evdev"
[ 4617.376] (**) Option "xkb_model" "evdev"
[ 4617.376] (**) Option "xkb_layout" "us"
[ 4617.378] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 4617.378] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 4617.378] (II) LoadModule: "synaptics"
[ 4617.378] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4617.379] (II) Module synaptics: vendor="X.Org Foundation"
[ 4617.379] compiled for 1.14.1, module version = 1.7.1
[ 4617.379] Module class: X.Org XInput Driver
[ 4617.379] ABI class: X.Org XInput driver, version 19.1
[ 4617.379] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 4617.379] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.379] (**) Option "Device" "/dev/input/event10"
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 32 - 544 (res 0)
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 32 - 352 (res 0)
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[ 4617.380] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report finger width.
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 255
[ 4617.380] (--) synaptics: ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 15
[ 4617.380] (**) Option "TapButton1" "1"
[ 4617.380] (**) Option "TapButton2" "2"
[ 4617.380] (**) Option "TapButton3" "3"
[ 4617.381] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.381] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 4617.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 4617.383] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 4617.383] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.332
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 4617.384] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 4617.384] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 4617.385] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 4617.385] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4617.386] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 4617.386] (II) No input driver specified, ignoring this device.
[ 4617.386] (II) This device may have been added with another device file.
I've tried looking for this problem elsewhere as it feels like such a newbie problem to have, but I have had difficulty. There are two errors in this log, I think, but they didn't mean much to me... Any help for a linux newbie? Thanks!
EDIT: Solved; as pointed out below, I needed a window manager for a non-root user to use.
Last edited by DJMankiewicz (2013-06-05 07:30:06)Well, soon you'll have to try out one of the more minimal options, in which you don't use any desktop environment but instead you install your own window manager (openbox, dwm, i3, etc) and use small, dedicated programs. Given your extreme space restrictions, I recommend going that route! But, take your time because that requires a bit of learning: you need to figure out which parts of a desktop environment you really need, then you need to learn the proper names for them so that you can search for information, then you need to start fiddling with configurations, etc. Better first to make sure your first Arch Linux installation is up and running properly and to learn a bit about the system before entering that downward spiral.
-
NetworkManager applet doesn't prompt for VPN secret for non-root user
I'm using NetworkManager in GNOME DE. When logged in as non-root user, I'm unable to connect to a vpnc profile.
* As non-root, I am able to add/remove/alter/connect to WiFi network profiles with no trouble.
* As non-root, I am also able to add/remove/alter vpnc profiles.
* However, the VPN group key and VPN user password do not appear to store properly when adding/editing the profile as non-root. I can enter them, but when I bring the dialog back up, they are always blank. Even so, I can see an entry for vpnc in the Gnome keyring.
* When I slide the on/off switch to try to connect with the vpn profile, there is no prompt for the VPN group key or password. The switch just slides back to Off immediately and I can see the text 'authentication required' flash briefly where it shows the connection status. After that flashes, the connection status is back to 'Not connected'. No error message displays.
* If I sign in as root, there are no problems. The VPN 'secrets' will save properly in the dialog, and also if I leave them blank, I'm prompted for them when I activate the connection.
* Creating the connection as 'root' is not an option, as this doesn't appear in profile list when signing on as non-root.
Any ideas on where to look or what to check? As mentioned above, non-root can maintain WiFi connections through NetworkManager just fine, so the problem appears localized to VPN 'secrets'. Also other applications (i.e. Evolution) have no trouble in dealing with authentication.
I do have polkit installed:
extra/polkit 0.110-2 [installed]
Application development toolkit for controlling system-wide privileges
extra/polkit-kde 0.99.0-2
Daemon providing a polkit authentication UI for KDE
extra/polkit-qt 0.103.0-2
A library that allows developers to access PolicyKit API with a nice Qt-style API
community/polkit-gnome 0.105-1 [installed]
PolicyKit integration for the GNOME desktopUpdate/more information on this...
My typical/preferred setup for my VPNs is to save the VPN group key, but to be prompted for my VPN user password on each connect. So, this is how I was trying to setup in the applet. Interestingly, I have found that if I save BOTH of the 'secrets' to the keyring, then I can connect!
The behavior is still as above in the dialog -- both secrets are blank if I edit the connection, although they are present in the Gnome keyring. As long as they are BOTH there, I can connect fine. But, if I have either of them set to 'Always Ask', then I am not prompted for them and the connection fails.
Although I can work with this, I would certainly still like to figure out what is going on and fix it, as it does bother me that it works that way:
* Why can't the dialog redisplay my secrets when I edit a connection as non-root?
* Why doesn't Always Ask work to prompt me for secrets when running as non-root?
Any ideas? I've used the Gnome/NetworkManager/vpnc combination on other desktops (this is my first Arch), and I have never seen anything like this. -
[Solved] Non-root user cannot access mounted ntfs filesystem
Hi -,
i have a dualboot system (arch/xfce + win7) and i use a ntfs partition /dev/sda2 to store files i use with both operating systems. I added the partition to fstab and it gets mounted, but i cannot access it with my non-root user. With root it works fine...
My fstab:
# cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
LABEL=home /home ext4 defaults 0 1
LABEL=root / ext4 defaults 0 1
LABEL=swap swap swap defaults 0 0
/dev/sda2 /media/sda2 ntfs defaults 0 2
Is there any option that allows all users to use the mounted device? Or how is this usually done ...
Last edited by muzzel (2012-05-30 20:39:58)See: NTFS-3G for important setup information.
My fstab line looks like:
/dev/sdb1 /media/Win_USB ntfs-3g uid=1000,gid=users,fmask=113,dmask=0022 0 0
This sets up some important parameters which the NTFS-3G Wiki Page covers. Basically, "ntfs" is only a basic driver and is built into the kernel. "ntfs-3g" is a much better, and less disk-eating, driver that you should install and use if you need the drive in Linux any more than occasionally. My fstab line makes my user (1000) the owner and the masks lets me write and etc to it. When you install NTFS-3G it is automatically used when you use the mount command to mount NTFS drives. In fstab, as above, you would specify it explicitly.
You can find your own user number by entering "id" at a terminal. -
Can't startx as non-root user [Solved]
I have no idea what's going on. I'm pretty sure I have my permissions set correctly, but right now running startx as a non-root user dumps me back out. Here's my log file:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/6d3da3d6-f72f-4623-82e7-e44e3c365711 ro
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 31 11:46:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "True"
(**) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling USB Mouse
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0649:103c:30f4 nVidia Corporation G96 [GeForce 9600M GT] rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00007000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.30 Fri Dec 18 14:21:29 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 195.30 Fri Dec 18 13:43:18 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1440x900 +0+0; 800x600 +0+0; 640x480 +0+0"
(**) Dec 31 11:46:23 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 31 11:46:23 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 31 11:46:23 NVIDIA(0): enabled.
(II) Dec 31 11:46:24 NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:1:0:0 (GPU-0)
(--) Dec 31 11:46:24 NVIDIA(0): Memory: 524288 kBytes
(--) Dec 31 11:46:24 NVIDIA(0): VideoBIOS: 62.94.4a.00.10
(II) Dec 31 11:46:24 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 31 11:46:24 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 31 11:46:24 NVIDIA(0): Connected display device(s) on GeForce 9600M GT at PCI:1:0:0:
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0)
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) Dec 31 11:46:24 NVIDIA(0): Assigned Display Device: DFP-0
(II) Dec 31 11:46:24 NVIDIA(0): Validated modes:
(II) Dec 31 11:46:24 NVIDIA(0): "1440x900+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): "800x600+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): "640x480+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) Dec 31 11:46:25 NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
(--) Dec 31 11:46:25 NVIDIA(0): option
(==) Dec 31 11:46:25 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(II) Dec 31 11:46:25 NVIDIA(0): Initialized GPU GART.
(II) Dec 31 11:46:25 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Dec 31 11:46:25 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Dec 31 11:46:25 NVIDIA(0): configuration option may not be set correctly. When the
(II) Dec 31 11:46:25 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Dec 31 11:46:25 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Dec 31 11:46:25 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Dec 31 11:46:25 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Dec 31 11:46:25 NVIDIA(0): Config Options in the README.
(II) Dec 31 11:46:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Dec 31 11:46:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) Dec 31 11:46:25 NVIDIA(0): Setting mode "1440x900+0+0"
(II) Loading extension NV-GLX
(II) Dec 31 11:46:25 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 31 11:46:25 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event11"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device HP Webcam
(**) HP Webcam: always reports core events
(**) HP Webcam: Device: "/dev/input/event9"
(II) HP Webcam: Found keys
(II) HP Webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Primax HP Wireless Laser Mini Mouse
(**) Primax HP Wireless Laser Mini Mouse: always reports core events
(**) Primax HP Wireless Laser Mini Mouse: Device: "/dev/input/event10"
(II) Primax HP Wireless Laser Mini Mouse: Found 3 mouse buttons
(II) Primax HP Wireless Laser Mini Mouse: Found scroll wheel(s)
(II) Primax HP Wireless Laser Mini Mouse: Found relative axes
(II) Primax HP Wireless Laser Mini Mouse: Found x and y relative axes
(II) Primax HP Wireless Laser Mini Mouse: Found absolute axes
(II) Primax HP Wireless Laser Mini Mouse: Configuring as mouse
(**) Primax HP Wireless Laser Mini Mouse: YAxisMapping: buttons 4 and 5
(**) Primax HP Wireless Laser Mini Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax HP Wireless Laser Mini Mouse" (type: MOUSE)
(**) Primax HP Wireless Laser Mini Mouse: (accel) keeping acceleration scheme 1
(**) Primax HP Wireless Laser Mini Mouse: (accel) acceleration profile 0
(II) Primax HP Wireless Laser Mini Mouse: initialized for relative axes.
(WW) Primax HP Wireless Laser Mini Mouse: ignoring absolute axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event4"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by contumation (2009-12-31 22:41:31)JuseBox wrote:Do you have a .xinitrc config? Also do you have anything in it?
My /home/<user>/.xinitrc file:
rl=$(runlevel | grep -o [0-6])
case $rl in
4) exec gnome-session;;
5) exec openbox-session;;
esac
quarkup wrote:
please paste the output of
ls -l ~
total 36
drwx------ 3 bao users 4096 Dec 31 13:58 .
drwxr-xr-x 5 root root 4096 Dec 31 03:26 ..
-rw------- 1 bao users 396 Dec 31 11:46 .bash_history
-rw-r--r-- 1 bao users 16 Aug 1 06:22 .bash_profile
-rw-r--r-- 1 bao users 108 Aug 1 06:22 .bashrc
drwxr-xr-x 3 root root 4096 Dec 31 03:34 .config
-rw-r--r-- 1 bao users 0 Dec 31 13:58 ls.txt
-rw------- 1 bao users 0 Dec 31 11:44 .Xauthority
-rw-rw-rw- 1 bao users 102 Dec 31 03:37 .xinitrc
-rw-r--r-- 1 bao users 278 Dec 31 03:32 .xinitrc~
-rw-r--r-- 1 bao users 100 Nov 21 10:01 .xsession
Last edited by contumation (2009-12-31 20:01:21) -
How do I run the application server instance as non-root user on port <= 1024?
I am using Sun One Application Server 7.0
Thanks in advance
Sri.Two options:
1) Start an instance using the root user, but configure the instance to switch to a non-root user upon startup. Use the "User" directive in the init.conf file of an instance to specify the user
http://docs.sun.com/source/816-7155-10/crinit.html#17116
You should also see the "Run As" setting of an instance in the administrative GUI.
2) Via the ndd command, you can set the smallest non-priveleged port number. See ndd documentation concerning the following setting:
tcp_smallest_nonpriv_port
Once you make the ndd setting, you can use a non-root user to listen on a port number that is equal to or greater than the value of the tcp_smallest_nonpriv_port setting.
Chris -
Setting previleges to a non-root user account to access ports
Hello ,
I am tring to do an icmp-ping to a machine in the network from an application by connecting to icmp port through a raw socket.
My question is i am able to connect to icmp port using raw socket only in root user account. But my application should run under a non root user account and do the ping for me.
1)How do i set previleges to a particular user to access icmp port?
I am running the application on solaris 9
2)I read a paper on net saying ports from 0 to 1024 can only be accessed by a root user account?
Why is this and what can be done for a non-root user account to access these ports.
3) Is this possible in solaris 9.
Thanks in Advance,
cheers,
palThere is only one solution: create a new Standard user account and set it as your auto login account, if you use that feature.
Using what you describe is mostly a false sense of security. Were someone to hack into the computer they could hack into the standard account, so you would not wish to keep any sensitive data in that account. Other things to consider:
Turn on your Firewall in Security & Privacy preference panel.
Use software to mask your online presence such as ProxyCap 2.03, MacProxy, Proxifier, or Hotspot Shield. -
Install AM in JES WS container with JES WS installed using non-root user
Does anyone know how to make Access Manager work when the Sun JES Web Server is installed using a non-root user? Is this even possible?
Basically it is documented in JES install guide
Sun Java Enterprise System 2005Q1
Access Manager Configured to Run as a Non-root User Example . . . . . . . . . . . . . . . . . . . . . . . . . 120 -
Non root user can delete root files, bug?
We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
Essentially:
# more /etc/vfstab |grep apps
/dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
# newfs -v /dev/md/rdsk/d0
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d0 last mounted as /apps
newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
Warning: 4096 sector(s) in last cylinder unallocated
/dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
20744608, 20843040, 20941472
# mount /apps
# ls -al /apps
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm *
rm: lost+found is a directory
sol10% rm -rf *
rm: cannot read directory lost+found: Permission denied
sol10% ls -al
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
sol10% exit
sol10% logout
# chgrp sybase /apps
# chmod g+w /apps
# ls -ald /apps
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
# ls -al /apps
total 20
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm -rf *
sol10% ls -al
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
sol10% id
uid=***(sybase) gid=***(sybase)
sol10% exit
sol10% logout
# pwd
# ls -ald /apps
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
# ls -al /apps
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
I'd be interested in you opinions regardless.
The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
# uname -a
SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
# prtdiag
System Configuration: VMware, Inc. VMware Virtual Platform
BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
==== Processor Sockets ====================================
Version Location Tag
Pentium(R) Pro CPU socket #0
Pentium(R) Pro CPU socket #1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DRAM in use 0 RAM slot #0 RAM slot #0
DRAM in use 0 RAM slot #1 RAM slot #1
DRAM in use 0 RAM slot #2 RAM slot #2
DRAM in use 0 RAM slot #3 RAM slot #3
==== On-Board Devices =====================================
VMware SVGA II
ES1371
==== Upgradeable Slots ====================================
ID Status Type Description
0 unknown ISA ISA Slot J8
0 unknown ISA ISA Slot J9
0 unknown ISA ISA Slot J10
1 in use PCI PCI Slot J11
2 in use PCI PCI Slot J12
3 in use PCI PCI Slot J13
4 available PCI PCI Slot J14
# dmesg
Wednesday, 10 September 2008 15:33:35 BST
Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0: IOC Operational.
Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 4132 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
isa, instance #0
i8042, instance #0
keyboard, instance #0
mouse, instance #0
lp, instance #0
asy, instance #0
asy, instance #1
fdc, instance #0
fd, instance #0
pci, instance #0
pci15ad,1976 (driver not attached)
pci8086,7191, instance #0
pci15ad,1976 (driver not attached)
pci-ide, instance #0
ide, instance #0
sd, instance #1
ide (driver not attached)
pci15ad,1976 (driver not attached)
display, instance #0
pci1000,30, instance #0
sd, instance #0
pci15ad,750, instance #0
iscsi, instance #0
pseudo, instance #0
options, instance #0
agpgart, instance #0
xsvc, instance #0
objmgr, instance #0
acpi (driver not attached)
used-resources (driver not attached)
cpus, instance #0
cpu (driver not attached)
cpu (driver not attached)
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
/pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
/dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
/dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
/dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
/dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 10440 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 131 1.00GB (131/0/0) 2104515
1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
# metastat -p
d8 -p c1t0d0s6 -o 109973513 -b 61440
d7 -p c1t0d0s6 -o 109461512 -b 512000
d6 -p c1t0d0s6 -o 109051911 -b 409600
d5 -p c1t0d0s6 -o 88080390 -b 20971520
d4 -p c1t0d0s6 -o 67108869 -b 20971520
d3 -p c1t0d0s6 -o 46137348 -b 20971520
d2 -p c1t0d0s6 -o 41943043 -b 4194304
d1 -p c1t0d0s6 -o 20971522 -b 20971520
d0 -p c1t0d0s6 -o 1 -b 20971520An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
Edited by: MadBishop on Sep 12, 2008 7:46 AM
Maybe you are looking for
-
How to create a report in excel format having two tab
Hi All, I have Business requirement where customer wants to create a report in excel format having two tab. Please let me know if it is possible? I am using 10.1.4.3.2 version of BIP. Thanks & Regards, Edited by: 862749 on May 20, 2013 7:36 PM
-
How can I get the alarm to sound on my Iphone with ios7
I set two different alarms on my phone, and I never had a problem hearing them until I updated to IOS7. I wake up late and can see the notification and snooze option, but no sound. Can anyone help?
-
All text seems to have gone missing. Look at the login screen. I use xfce4, this started a few days ago. Xorg.0.log, journalctl etc looks fine. Whats going on here?
-
Why provide fonts that can't be used??
Adobe provided a huge list of fonts in InDesign CS4, but several are not able to be embedded when used because of licensing restrictions. Why did Adobe, in its infinite wisdom, provide fonts that can't be reproduced on the page? Along that same thoug
-
Hard Drive attached to Airport Extreme (AC) won't connect
I cannot connect to my USB hard drive which is connected to my new Airport Extreme (Wireless AC) router. If I unplug the hard drive, it seems to work for a bit. Then for unknown reasons, I am unable to connect to it. It worked in 10.8 fine, I never