How to make object dissapear and reappear?

I was watching a video on YouTube on how to make an explosion. However, the video is not very helpful as the guy doesn't explain anything. I am not a complete newbie, but I still need some help on simple stuf sometimes. The part I am stuck on is when he makes a "patch" of the texture in the driveway, and then he covers up his explosive box. After that, he copies the box and is able to make appear and dissapear.
The part of the video I don't understand is at 1 minute, 22 seconds.
Here is the video link: http://www.youtube.com/watch?v=qL1KkAfwflk

@Netcommercial, Sorry about the double post, nobody was replying so I thought maybe it wasn't specific enough. Anyway, changing the color of a box does not make it disappear. The guy in the video was able to make the box completely disappear (not by changing the color), and he was able to make it reappear too. That is what I need.
@Rick Gerard, I understand he is using multiple layers, but how does he make the box reappear? Basically, you are saying that if I took a layer with an object, duplicated it, then put the original layer underneath the layer that has the mask, I would make the object disappear?

Similar Messages

How to make Sales group and office field mandatory in VA01 first screen

hi gurus,
can anybody tell me how to make Sales group and sales office mandatory field on VA01 tcode first screen. i have requirement to make it compulsary on the first screen otherwise they wont be able to goto next screen.
will reward points for sure
thanks
mandy

Hi! Mandy,
Try using t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry required by you make the necessary changes(Output only, invisible or required) and save.
The system will prompt to assign a package and request enter the necessary values.
Provide your feedback.
Regards,
PATHIK

How to make own editor and call it?

could you please tell me how to make own editor and call it on a clicking of a push button corresponding to an test Item

In the Object Navigator... just click on the 'Editor' Node and press the '+' (Create) button....
Set then any properties as you like....
So simple...
Greetings,
Sim

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

Hi,
How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
Note : I have created custom Content Type since I have custom columns along with upload column..
Regards, Shreyas R S

go to library settings
Change new button order and default content type
set your custom content type to be #1
when you upload new document it will automatically have your custom content type
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

How to make an ebook and sell it on the ibook or app store??

How to make an ebook and sell it on the ibook or app store??
Can anybody help me please T^T
By the way I'm in Thailand and want to sell my ebook around the world.
This is my dream ^^.. Help me please...

Hi,
Start with the ADC iOS dev center here.
http://developer.apple.com/devcenter/ios/index.action
Carolyn

How to make an before and after effects?

So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
How to make it?
Thanks:)

Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking.

HT1420 How to make Apple ID and iCloud the same Id?

How to make Apple ID and iCloud ID the same after they have been created?
iTunes keeps asking for ID and passwords that were created differently.

You can't im afraid. I wanted to do the same and got the following from Apple:
I am sorry, you cannot update your email address to MobileMe address as each Apple ID is unique.
Ross, I would like to let you know that, you cannot change your Apple ID if it was at any time a .Mac or MobileMe email address, even if your subscription has ended or been canceled.
The email address that ends in .me is already an Apple ID as well, as when you set up a MobileMe email its automatically set up as an Apple ID. So you cannot use this email address on another account. It is permanently associated with your MobileMe Apple ID.
This article provides helpful information when choosing which Apple ID to use with iCloud:
Apple IDs and iCloud
http://support.apple.com/kb/HT4895
This page also covers topics such as moving MobileMe accounts to iCloud, managing your Apple ID, and how to get content purchased with multiple Apple IDs onto your iOS device.
I hope this information was helpful. If you require further assistance, please do not hesitate to reply to this email and I will be more than happy to assist you further.
Sincerely,
Thenmozhi
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I wrote back and tried to escialte the issue but got no where. The whole thing is very disappointing and I hope Apple sort it out eventually.

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How to make group visble and hidden

I have to make one group(which consists of some field) visible and hidden on tableselect. Initially that group should not visible and after selecting table those group need to show. How to make it during runtime..Right now i made the table leadselect -1 so it is not selected. So how to make it hidden.
Thnaks
Nitya

Use a calculated attribute (read-only, type=Visibility) and implement the get-method like
WDVisibility getGroupVisibility(...)
return wdContext.node<TableDataSource>.getLeadSelection() == IWDNode.NO_SELECTION
? WDVisibility.NONE : WDVisibilty.VISIBLE;
Bind the "visible" property of the group to this attribute.
Armin

How to make JTextArea rows and colums auto-increase?

My test program is attached as below.
The JTextArea can not enlarge itself when the text in a line is too long that some characters are hidden.When rows grows too many will also see the problem.
How can I make the rows and columns auto-increase to meet the width or height of my text?
-----My Test Demo----
import java.awt.*;
import java.awt.event.*;
import java.awt.color.*;
import javax.swing.*;
public class Test{
public static void main(String[] args){
JFrame f = new JFrame("My Editor");
Container ct = f.getContentPane();
JPanel jp = new JPanel();
JTextArea ta = new JTextArea("My software.",10,30);
JTextArea ta2 = new JTextArea("Hello,World!",10,30);
jp.setPreferredSize(new Dimension(400,400));
jp.setBackground(Color.green);
jp.setLayout(null);
jp.add(ta);
ta.setBounds(100,100,150,200);
ta.setOpaque(false);
ta.setBorder(null);
jp.add(ta2);
ta2.setBounds(100,120,150,200);
ta2.setOpaque(false);
ta2.setBorder(null);
// jp.addMouseListener(new MyMouseListener());
ct.setLayout(new BorderLayout());
ct.add(jp,BorderLayout.CENTER);
f.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent evt) {
System.exit(0);
f.setVisible(true);
f.pack();

This link to the Java Swing tutorial will show you how to add the JTextArea to a JScrollPane:
http://java.sun.com/docs/books/tutorial/uiswing/components/simpletext.html#textarea
It appears to me that you are new to Swing so you should read the entire tutorial "Creating a GUI using JFC/Swing" before asking any more question. The tutorial can be read online or downloaded from:
http://java.sun.com/docs/books/tutorial/
The download link for all tutorials on this page is near the bottom.

How to make components appear and disappear dynamically.

So I admit I am from the HTML world and have been able to
dynamically control divs to make them visible and invisible, as
needed. How do you do that in Flex/Flash?
I have tried the "visible" attribute, but the component takes
up the same space when invisible leaving a big hole in the page --
very surprising. I have changed the height and width to zero (which
works) but have not been able to restore the size (since I want it
to be width=100% and it is expecting a number, not percentage.
So how do you implement hidden divs in Flex.
Thanks.
Mike

In Flex, there is a separation between "is this component
visible" vs. "does this component take screen space." Similar to
the difference in CSS between "mydiv.style.visibility = 'hidden'"
and "mydiv.style.display = 'none'".
In Flex:
// make it invisible
mything.visible = false;
// make it not take up space onscreen
mything.includeInLayout = false;

How to make the RESCUE AND RECOVERY hidden partition when changing the hard disk drive

I've got T61 and I'd like to know if is it possible (in case of changing the HDD) to make the RESCUE AND RECOVERY hidden partition on the new hard disk drive? If yes - please let me know how to do that.

hi you the rescue partition is made automatically when you use your recovery cd's on the new HDD so no problem there!
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

How to make object dissapear and reappear?

Similar Messages

Maybe you are looking for