How to make OBPM 10.3g solutions highly scalable and performant?

Hi experts,
I would like to request some advice on how to make Oracle BPM 10.3g based solutions highly scalable. In our organisation, we are rolling out few processes (3-5) on OBPM 10.3g, with couple of 100 concurrent users on each. But going forward, we expect at least 50 processes, with concurrent users on each process reaching upto 500-1000. We understand that each process could be packaged as separate OBPM project, targeted to separate OBPM engine, where each engine itself is targeted to a separate WebLogic server cluster. Is this the correct approach?
Apart from above, are there any additional factor/apporach that we must consider while implementing our solution?
Is there any documentation that discusses how to improve the performance/scalability of OBPM 10.3g solutions?
We would highly appreciate any pointers.. Many thanks.
Brgds,
Amit

LoadRunner is one of the more popular means of performance testing BPM....
[http://www8.hp.com/us/en/software/software-product.html?compURI=tcm:245-935779&pageTitle=loadrunner-software]

Similar Messages

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

How can I change IOS7 to be higher contrast and bolder?

How can I change IOS7 to be higher contrast and bolder? I can hardly read the timer/alarms among other things? I really am not thrilled with the new delicate look and I'm a woman.

Settings > General > Accessibility > Contrast & Bold options found here
You can also increase the text size under accessibility options.

How to make a silhouette from a portrait (photo) and-

How do I make a silhouette from a portrait?
And how do I make the background transparent?

Do you mean that I send you the portrait?
Chabæna
26 apr 2014 kl. 12:31 skrev c.pfaffenbichler <[email protected]>:
Re: How to make a silhouette from a portrait (photo) and…
created by c.pfaffenbichler in Photoshop General Discussion - View the full discussion
How do I make a silhouette from a portrait?
Ah, but wouldn’t it be ever so much easier to explain if you actually provided (a lores of) the image in question?
And how do I make the background transparent?
Preferably with a Layer Mask and then saving in the appropriate file format (psd or png24 for example support transparency).
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6332417#6332417
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6332417#6332417
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6332417#6332417. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms

Hi
How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms. deskret pulse length 0.01 ms. for MCB2300. Are there examples of such implementation?
thanks

Sergiv,
I see you as having two options (if you want finer resolution):
1) Lower the period of the PWM (such that the percentage values would be of finer resolution with regards to the overall PWM period).
2) Alter the duty cycle of the PWM with an Inline C node.
From what I understand, LabVIEW simply calls into the PWM driver distributed by Keil (for the MCB2300). You can call into the PWM driver directly and/or change register values on the chip if you want in order to do whatever you want. Both would require you to look through/program in C code.
Kevin S.
Applications Engineer
National Instruments

How to make an openfiledialog? (browse a file and put it in a parameter)

How to make an openfiledialog? (browse a file and put it in a parameter)
Best Regards

hi,
check the code below:
FORM sub_gui_download.
* Define local variables
DATA:
    lo_fullpath       TYPE string,
    lo_filename       TYPE string,
    lo_path           TYPE string,
    lo_user_action    TYPE i,
    lo_encoding       TYPE abap_encoding.
* Define local constants
CONSTANTS:
    lc_encoding(1) TYPE c VALUE 'X',
    lc_directory TYPE string VALUE 'D:',
    lc_filetype TYPE char10 VALUE 'DAT',
    lc_separator TYPE char01 VALUE 'X',
    lc_blank TYPE char01 VALUE ''.
* Call method to create dynamic save_path and save_format
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      with_encoding        = lc_encoding
      initial_directory    = lc_directory
    CHANGING
      filename             = lo_filename
      path                 = lo_path
      fullpath             = lo_fullpath
      user_action          = lo_user_action
      file_encoding        = lo_encoding
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Check user_action
IF lo_user_action <> cl_gui_frontend_services=>action_ok.
    EXIT.
ELSE.
*   If user_action equals to action_ok, call function module to download datas
*   using download table i_dwn_tab
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = lo_fullpath
        filetype                = lc_filetype
        write_field_separator   = lc_separator
        trunc_trailing_blanks   = lc_blank
      TABLES
        data_tab                = i_dwn_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    IF sy-subrc <> 0.
      MESSAGE i007.
    ENDIF.
ENDIF.
ENDFORM.

How to make an effect of a glass breaking and fall into pieces?

How to make an effect of a glass breaking and fall into pieces?
I want to make an effect where there's a guy hitting a wall and the wall falls into pieces...Please help!! I can make the guy in green screen but its the effect of the wall breaking that I want to know how to make in motion. Hope anyone can help

Search is your friend:
http://discussions.apple.com/search.jspa?threadID=&q=shattering&objID=f656&dateR ange=all&numResults=30
Patrick

How to make editing cell to show up caret and taking keyboard event

Hello everyone:
I have the following problem with table editing.
1. using mouse clicking, the editing cell will have cursor and taking keyboard event.(no problem with it)
2. just type in data, it will show up in the selected cell, but the editing cell do not have cursor visible and also do not fire the keyboard event.
I have problem with this one. So how to make editing cell to have caret visible and taking keyboard event.
Thank you very much!
--tony

Hi,
you should subclass JTable and overwrite two methods.
1. protected boolean processKeyBinding(javax.swing.KeyStroke ks,
java.awt.event.KeyEvent e,
int condition,
boolean pressed)
to store the current keyboard event,
2.public boolean editCellAt(int row,int column,java.util.EventObject e)
to fix the problem with isCellEditable and curret position and direct the event into proper place.

How to make a Integration between jdev10.1.2 and vss

How to make a Integration between jdev10.1.2 and vss to enable a version control.the help document tell to make a extension file, but how to do? thank you!

http://www.oracle.com/technology/products/jdev/101/htdocs/partners/addins/905resources.html
There is a link there to:
Creating a Version Control System Extension
A project with sample code to get you started

How to monitor user logs,security logs,trace file,and performance monitori

Hi guys,
pls tel me how to monitor user logs,security logs,trace file,and performance monitoring.
thanks
regards
kamal

Hi,
you can have a look in the Netweaver administration :
http://<portal>:<port>/nwa
Go to monitoring, Java system reports, etc..., you will find what you want.
Fabien.

How to make Help view well on both laptops and desktops

Hi -- I'm trying to learn RoboHelp 7 and just created my first WebHelp project. I want to show it to a friend, but don't have a server I can publish it to, so I copied all the files onto my flash drive and put it on my laptop. It all works fine, which is a relief -- however, the custom colors are way off, and some of the screenshots are now too big, so the user would have to scroll (which can be annoying). I created it on my desktop and have been looking at it on a larger monitor (1680x1050), but the laptop is old (1024x768). The thing is, a lot of people might have to view it on 800x600.
I couldn't find any information in RH's Help about how I should have set it up so that it views well on different systems. I'm hoping someone could please advise me as to what I should have done, and if there's anything I can do now to fix it, or point me to some information. I used Arial 10 pt for the text, and now it looks 12 pt. Should I have made it 8 pt? Is there a rule for how large an image should be to be viewed on a laptop and a desktop?
One last thing, it's too large to put on a CD, so is does anyone know how to make this into an executable?
Thanks in advance for any help you can give!
Daryl

Hi Daryl
I use an eBook compiler to convert WebHelp to an executable file. You might investigate eBook compilers for that bit. However, I'm not sure how that would help you since a compiler will do little more than to take a swarm of WebHelp files and store them in a wrapper to create a single file. Generally you will end up with something that although it exists as a single file, is larger than what is inside.
Are you SURE it's too big for CD? CD will hold 650 megs (700 if you buy the extended types).
On the screen size issue WebHelp itself should adapt fine. Probably it's the images you are concerned with. And the general rule of thumb is to capture images at a reasonable size to begin with. Never EVER just insert a big ole image into RoboHelp and grab the sizing handle to make it smaller. It will still consume a larger amount of space and the quality will suffer badly. So the best approach is to copy the image at a reasonable size to begin with. Something that may fit nicely in the Topic Pane area as it is presented in the space provided by the lowest common denominator. In your case I believe you said that many are still at 800x600.
Your 10 point text will still be 10 points at a smaller resolution. It will just look a bit different.
Hopefully this helps... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

How to make proxy RFC between SAP R/3 and XI

Hi,
We have installed XI3.0sr1 with all SP16. Also also added <b>proxy</b> addon in R/3 machine. When i try to execute SPROXY tcode in R/3 , system shows " <b>No connection to Integration Builder</b>"
Can you please help , how to make RFC connection .
Thanks
Chimsik

Hi,
Check Exchange Profile Entries of R/3 so that it fetchs data from XI ..it should connect to XI
Exchange Profile link is -
http://<R3Server>:5<instance>00/exchangeProfile
Proxy Prerequisites-
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
Check SAP Configuration Guide-
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
- Page 27 in this document
Also check this thread-
Activating ABAP proxy issue
Hope this helps,
REgards,
Moorthy

How to make a random generator with a max and a minimum

hello
can anybody telle me how to make a random generator for numbers with a maximum and minimum input
thanks in advance

Hi suske,
If you want a random day for a given month, this is how I would do it.
Hope this helps,
-D
Message Edited by Darren on 02-02-2006 01:35 PM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Days_per_month.jpg ‏32 KB

How to make website look correct in Safari, Firefox, and Chrome?

Hello there. I'm working on a website which was inherited to me by someone who died. So I am left with all of his coding which is about 4 years old. Now I'm working on positioning of the website and i've found that the only browser the website looks like it's supposed to is Safari and I can't for the life of me figure out how to make it look right in all the browsers and on a phone or tablet. It might be easier if I started from scratch but unfortunately I don't get that luxury. Please help me.
Here's a link...MuseumOfNaturalistory.com

I dont understand what some of these errors are asking of me. For instance, this one...
if (xmlhttp.readyState==4 && xmlhttp.status==200)
✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
That's the way the code has to be in order to function. What does it want from me?
And then here....
Line 71, Column 5: an attribute value must be a literal unless it contains only name characters </div>✉You have used a character that is not considered a "name character" in an attribute value. Which characters are considered "name characters" varies between the different document types, but a good rule of thumb is that unless the value contains only lower or upper case letters in the range a-z you must put quotation marks around the value. In fact, unless you have extreme file size requirements it is a very very good idea to always put quote marks around your attribute values. It is never wrong to do so, and very often it is absolutely necessary.
Line 71, Column 5: character "<" is not allowed in the value of attribute "id" </div>✉It is possible that you violated the naming convention for this attribute. For example, id and name attributes must begin with a letter, not a digit.
I have absolutely no clue what it is asking of me. Doesn't it have to be that way? Also why when I go to "Line 71" that isn't where this actual code is? Is there some special way to decipher this?

How to make OBPM 10.3g solutions highly scalable and performant?

Similar Messages

Maybe you are looking for