How to make ole container auto call Word to edit my file?

I successfully insert a Word file into the ole container. But if I want to init Word to edit my file, I have to double click on the ole container. Is there any command that can auto call Word and pass the control to Word when I retrieve the record?
Thanks?

I successfully insert a Word file into the ole container. But if I want to init Word to edit my file, I have to double click on the ole container. Is there any command that can auto call Word and pass the control to Word when I retrieve the record?
Thanks?

Similar Messages

  • How to make own editor and call it?

    could you please tell me how to make own editor and call it on a clicking of a push button corresponding to an test Item

    In the Object Navigator... just click on the 'Editor' Node and press the '+' (Create) button....
    Set then any properties as you like....
    So simple...
    Greetings,
    Sim

  • How to make VPN client auto timeout when it still idle?

    How to make VPN client auto disconnect when it still idle?
    Hi,I found some user still connected the VPN evenif they dose not use the VPN resouse.
    I try to set a "idle timeout" for the VPN configuration.
    We use PIX515 8.0.3 and CISCO ACS 4.2 for the VPN's connection and authentication,and the user use cisco vpn client for the connection.
    I have tried many methods,but all failured.
    First,I configed "vpn-idel-timeout 5" on PIX.It can not worked.
    so,I add Radius(CISCO VPN 3000/ASA/PIX 7.0+) attribute "[026/3076/050] Authenticated-User-Idle-Timeout" on CISCO ACS,It still not worked.
    And I also add IETF RADIUS Attributes "[028] Idle-Timeout" on group setting on ACS,it always not worked.
    i found in vpn client's statistics,it always has some byte sended or received, i thought it maybe IPsec keepalive message or Radius message.
    This maybe the reason because the PIX or ACS think the vpn user is keep working.
    Can someone tell me how to make a "idle time out"?
    best regard.
    Roger

      here is the configuration on PIX,
    group-policy DfltGrpPolicy attributes
    wins-server value 10.0.0.67 10.0.0.68
    dns-server value 10.0.0.67 10.0.0.68
    vpn-simultaneous-logins 20
    vpn-idle-timeout 5
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpn-acl
    default-domain value mydomain.com
    address-pools value vpnpool group-policy DfltGrpPolicy attributes
    wins-server value 10.0.0.67 10.0.0.68
    dns-server value 10.0.0.67 10.0.0.68
    vpn-simultaneous-logins 20
    vpn-idle-timeout 5
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpn-acl
    default-domain value want-want.com
    address-pools value vpnpool

  • I want to upgrade my mac os 10.6.8 to 10.8.2 , will this erase all my files,apps,etc ? and will i loose the licence of microsoft office 2011, how to make a backup on a pendrive ?  I have files of approx 180 gb , THANK YOU

    I want to upgrade my mac os 10.6.8 to 10.8.2 , will this erase all my files,apps,etc ? and will i loose the licence of microsoft office 2011, how to make a backup on a pendrive ?  I have files of approx 180 gb , THANK YOU !!

    Forget the Pendrive stategy...
    Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
    By far the easiest way to make such a Backup, is to use something like
    SuperDuper  http://www.shirt-pocket.com/
    or CCC  http://www.bombich.com/
    That way, should anything untoward happen during the Upgrade,
    you will NOT LOSE ANYTHING.
    (Get an EHD that is at least equal to your current Drive...)
    Also, Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com

  • How to make a PDF form call Web service and return a static pdf for user to print?

    Hi all,
    Can anyone help me regarding the feasibility of using PDF forms for my following case?
    I would like to create a Dynamic pdf form. User only have the Acrobat reader. they can enter some information. Then have a submit button. when user click the submit button, it can call the web service with data. then Web service returns a Static PDF document based on data and the user can print it out. (and maybe save as separate pdf file)
    1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
    2. As I understand I need to have Live Cycle Designer to create a pdf  and make it Reader Enabled. So user can user reader to call webservice? am I correct?
    3. What minimum reader that user need to have? PDF reader 7 or above?
    4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
    5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
    Thanks a lot

    We have done a similar approach in the past and yes, it can be doable.
    1. Is that possible to implement? Because I know PDF can call web service, but dont know how it handle when the webservice returns another static PDF document. could it able to handle the responds and open up in another acrobat reader?
    Srini: We have developed a Servlet to talk to Webservice. Based on the Webservice response, the Servlet, prepares the Byte stream and sends it to Webbrowser to display as a PDF. The PDF data was submitted to Servlet in XML format.
    But if you do not want to use the above approach, then you have to use the Workbench Process.
    Submit the PDF data to a Workbench process and the inside process, execute Webservice Service with the data. Once the response is received, prepare the data XML and render a PDF with it.
    To do this, you need LiveCycle Server and Reader Extensions server component.
    2. As I understand I need to have Live Cycle Designer to create a pdf  and make it Reader Enabled. So user can user reader to call webservice? am I correct?
    Srini: If you want to use the Servlet, you can Reader extend the PDF with Acrobat.. But if you want to submit the data directly to Webservice, then you need Reader Extensions server component.
    3. What minimum reader that user need to have? PDF reader 7 or above?
    Srini: Not sure but Reader 8 and above should work.
    4. I have a webservice serve the same purpose for web. But if I want the same web services can serve both web and PDF form. So, whatever client (PDF or Web)make the web service call, server returns the PDF document to client. Is that possible ? Do I need to make any changes on web service?
    Srini: If you use the Servlet approach, then you can re-use the same webservice. But if you want to submit directly to the same webservice, you may need to change it to suit your data XML.
    5. Do I need to get any other Adobe server product? (other than Live Cycle Designer )
    Srini: If you use the Servlet approach, you do not need any server component but other approach, you need Livecycle Server and Reader Extensions server component.
    Thanks
    Srini

  • How to make J2EE engine auto load The JSP Pages

    After I modify some JSP pages, If I just copy them to  the folder in the Server, The pages didn't update.
    How to make it auto update?

    Hello Shen,
    please take in consideration, that JSP page is translated to HttpServlet  component when deployed. It's not accessed via original JSP file.
    You can try to modify the final HttpServlet class file, but then you have to go through pre-compiling.
    Hope it helps,
    regards.
    mz

  • How to make phone vibrate when call is answered?

    Hi!
    Does anybody know how to make a BB phone (Bold 9700) to have a short vibrate when your call is being answered, so that you don't have to look at the phone or hold it to your ear when making a call?
    Appreciate any advice, thks!

    Hello Daven02,
    You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
    You can find a variety of supported headsets at the Shop BlackBerry website.
    Thanks and have a great day!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to make Transperant container visible , invisble by code

    Dear experts ,
    I want make transaperant container visible or invisible based some boolean value .
    I have gone thr' class    CL_WD_UIELEMENT and CL_WD_TRANSPARENT_CONTAINER. I have found method SET_VISIBLE .
    Let suppose name of my transperant container TC_COSTCENTER .Please let me know what code I have to write . Where should I write ?
    I am writing it code in WD_INIT as this process is based on value that I get on boolean value which tell decide visibility of Transperant container.
    Waiting for reply . Urgetly .
    Points will be given surely .
    Cheers
    Parry

    Hi Parry,
    The dynamic programming way is follows:
    you need to first get a reference to the root element 'ROOTUIELEMENTCONTAINER' from the view reference available within the wddomodifyview method. the variable returned is of type cl_w_uielement_container. you can use the method get_root_element( ) of the interface if_wd_view for this purpose.
    next get a reference to the transparent container by using the method get_child of the class cl_wd_uielement_container( using the variable returned from the prevoius call) and cast it to a variable of the class cl_wd_transparent_container. to this method you need to pass the id of your transparent container.
    Once you have the reference you can use the method set_visible( ) to make the container visible or invisible at runtime.
    However you need to be careful about the placement of this code within the wddomodifyview method because it would get executed every time. Thus the best way is to store the reference to view in a component controller the first time and later on use this attribute anywhere within your component.
    Regards,
    Shweta

  • How to make only part of a PDF document editable?

    I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we don't want them to be able to change any of the main copy on these documents. The only thing I've been able to come up with as a solution is to create outlines of the text that I don't want editable, but I need the copy to be able to be read by computer systems for disability purposes. Does anyone have any ideas on something I could do for this? Or has anyone dealt with anything like this? Any help would be greatly appreciated!

    Hi vward26,
    You can use Acrobat to make only part of a PDF document editable.
    Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
    Regards,
    Florence

  • How do I stop the auto generation of previews to imported files?

    In a recent post it was suggested that I do not let Aperture automatically generate the previews to all imported files. I think that is a great idea, but how do I stop the auto generation of such files?
    Under Preferences/Previews I have unchecked the New projects automatically generate previews, but after I do the import the processing wheel continues to spin for quite some time (depending on how many files I imported).
    Thanks in advance.
    David

    Take a look here:
    Pretty much the same in Ap2 and Ap3
    [http://photo.rwboyer.com/2009/01/03/aperture-2-quick-tip-managing-previews>
    RB

  • How to make a particular row and column field editable in ALV

    Hi Experts,
    I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
    Kindly help me out to solve this.
    Any help would be appreciated.
    Thanks,
    Ashutosh

    Hi Ashutosh,
    please check below, explained by some experts.
    In the below link  editing two columns MOD_RANK and TECH_RANK.
    These two columns will be in edit mode once after selecting the required record
    Editing single cell in a row of ALV table
    And also look for more info
    http://scn.sap.com/thread/884976

  • How to populate the CONTAINER, when calling a WorkFlow Task via FM?

    Hello,
    I am trying to trigger an email notification to user's SAP Inbox, if Outbound IDOC got failed. I wrote the below code in the processing FM, but, i am stucked at populating the CONTAINER parameter of this Task, pls. let me know How/with What I have to populate the CONTAINER parameter of this FM?
    DATA: wa_input_container    TYPE swr_cont,
                wa_swr_messag       TYPE swr_messag,
                wa_swragent             TYPE swragent.
    * Fill Workflow element
          wa_input_container-element = '_WI_OBJECT_ID' .
          wa_input_container-value   = wa_idoc_control-docnum.
          APPEND wa_input_container TO itab_input_container.
    * Fill Email body
          wa_swr_messag-msg_type = 'E'.
          wa_swr_messag-line = 'Error'.
          APPEND wa_swr_messag TO itab_swr_messag.
          CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
            EXPORTING
              task               = 'TS00007989'
              language           = sy-langu
              user               = sy-uname
              start_asynchronous = 'X'
            IMPORTING
              return_code        = v_sy_subrc
            TABLES
              input_container     = itab_input_container
              message_lines      = itab_swr_messag
              agents                   = itab_swragent.
        ENDIF.
    Thank you.

    Hi,
    Pls refer below link.
    FM SAP_WAPI_START_WORKFLOW Exporting container without values

  • How to make List.contains(Object) work when you write your own .equals func

    I have a list of objcts of a class defined by me. I want to use the List.contains(String name) function to tell me if it contains an object of that name. I have overriden the .equals function as shown in [1]. I then use the code at [2] to to test it, with a bit of debugger output as shown in [3]. It is not working, my overriden method is not getting called by List.contains(String name).
    Can anyone tell me how to get this to work?
    [1]     @Override public boolean equals(Object esId) {
            if(esId.getClass().isAssignableFrom(String.class)) {
                System.out.println("object name " + this.eslimId + " compare to " + esId + " = " + this.eslimId.equals(esId));
                return this.eslimId.equals(esId);
            } else {
                System.out.println("wrong class");
                return super.equals(esId);
        }[2] graphics.getProcedures() returns private List<ProcedureGraphicSet> procedures;
    System.out.println( " graphics.getProcedures().get(0).equals(\"ESLIM_009\")= " + graphics.getProcedures().get(0).equals("ESLIM_009"));
    System.out.println( " graphics.getProcedures().contains(\"ESLIM_009\")= " + graphics.getProcedures().contains("ESLIM_009"));[3]
    object name ESLIM_009 compare to ESLIM_009 = true
    graphics.getProcedures().get(0).equals("ESLIM_009")= true
    graphics.getProcedures().contains("ESLIM_009")= false

    This is a gross violation of the contract for the equals method, and you are basically getting bitten by that. The equals method must be symmetric, meaning this must hold for all objects A and B:
    A.equals(B) == B.equals(A)This does not hold for your equals method because for any string A and custom object B:
    A.equals(B) == falseAnd, apparently, the List.contains() method is choosing to compare objects that way.
    You must iterate through the list and check the names yourself, or use some sort of functional package which provides a List.contains() type method which takes a Predicate object of some sort.
    Edited by: jtahlborn on Feb 11, 2008 11:03 AM
    Edited by: jtahlborn on Feb 11, 2008 11:03 AM

  • How to make the Commit after calling a BAPI from SE37 ?

    Hi
    When i use a BAPI for update some SAP table i always call the BAPI inside a program and then i call the BAPI_TRANSACTION_COMMIT for made the changes and validate them
    Bot now i need to test the BAPI directly in SE37 , and the BAPI returns the sucess message but i can not see the changes in the SAP tables , i guess i need to make the Commit but how can i do this ? 
    by calling the BAPI_TRANSACTION_COMMIT directly in SE37 after the call to the other BAPI  ?
    Thanks
    Frank

    se37 > clear the field of the function module name
    menu path: Function module > test > test sequence and give you FM's sequence you want to test

  • Help... How to make a search in ms word documents...

    Hello, im new to portal and I would like to know how to create a text search in some ms word documents. The documentation of oracle context is great, but the integration to portal is very poor.
    I have created a content area an it displays the items, but where to start to make the search in those documents?.
    thanks.
    Mario Bellido.

    if you don't use oracle default search buttons, then you may code your own search buttons, inside, you may ,
    e.g., user might want to enter height and age fields(Assume the table columns are HEIGHT and AGE),
    then use,
    IF :heightitem is not null then
    w_str := ' AND HEIGHT ='||:heightitem;
    END IF;
    IF :AGEITEM IS NOT NULL THEN
    w_str := w_str||' AND AGE='||:ageitem;
    END IF;
    then you set_block_property('..',default_where,w_str); then execute_query. In order to avoid giving user blank form fields when no records found, which oracle did this badly, then you may use SELECT COUNT(*) into cnt FROM ... WHERE ...w_str to detect the cnt, if cnt > 0 then execute_query, if not, then shoot no record data found message out.

Maybe you are looking for