How to make one color stand out in a black/white video
I am doing an expirimental film and I cant figure out how to do the effect I want. What I want to do is have droplets of blood falling into a puddle of it (this is fake blood, incase anyone is freaked out) and have shots of small blood puddles and have the Blood colored but everything else black and white. Does anyone know how to do this in premiere elements?
jubgb
I still do not know your version of Premiere Elements and your computer operating system, but here is a plan that would probably work for Premiere Elements 11, 12/12.1, and 13/13.1 on Windows 7, 8, or 8.1 64 bit.
But you say that you are starting with a black and white image. If you could start with the color version of the image, I think we have a promising path to have the fake blood appear in color on a black and white image.
This would be done by applying the Color Pass effect to the color photo version. Color Pass Effect is found under fx Effects/Image Control/Color Pass.
Then you would edit the Color Pass effect under Applied Effects Tab/Appied Effects Palette/Color Pass Panel expanded. But I find that the most effective editing of that effect is done using the Setup whose icon appear to the right of the Color Pass Panel.
Have you used the Color Pass effect before?
https://helpx.adobe.com/premiere-elements/using/effects-reference.html
I will offer how to suggestion for its use if interested. As for starting with the black and white, then I need to think about that some more.
ATR
Similar Messages
-
[iPhone] How to make one color transparent on a UIImage?
On my iPhone app I have a UIImage instance. I want to get a derived a UIImage that is the result of the first UIImage where one of its colors (e.g. magenta) is made transparent. How can I do this?
NOTE: I cannot make the color transparent in Photoshop, the UIImage is created on the fly by the user. I need to do the "postprocessing" on the phone itself, after the user is done "drawing" the image.jubgb
I still do not know your version of Premiere Elements and your computer operating system, but here is a plan that would probably work for Premiere Elements 11, 12/12.1, and 13/13.1 on Windows 7, 8, or 8.1 64 bit.
But you say that you are starting with a black and white image. If you could start with the color version of the image, I think we have a promising path to have the fake blood appear in color on a black and white image.
This would be done by applying the Color Pass effect to the color photo version. Color Pass Effect is found under fx Effects/Image Control/Color Pass.
Then you would edit the Color Pass effect under Applied Effects Tab/Appied Effects Palette/Color Pass Panel expanded. But I find that the most effective editing of that effect is done using the Setup whose icon appear to the right of the Color Pass Panel.
Have you used the Color Pass effect before?
https://helpx.adobe.com/premiere-elements/using/effects-reference.html
I will offer how to suggestion for its use if interested. As for starting with the black and white, then I need to think about that some more.
ATR -
How can I make the drawings stand out more?
Hi everyone,
I have a design I like but I don't know how to make the drawings stand out more in the boxes?
I feel they are a little bit lost in the squares. This design is the home page of foils
every bit of advice would be very appreciated. Thanks a lotHi SRiegel,thank you for your answer. I just put the screenshot here.
But the website is more complete to see the overall atmosphere. -
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.
-
How to make a short clip out of the original one ?
Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
Neither Premier nor After Effect have an ouput option such as "same as original source" .
So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
Thanks in advance.May be I haven't made myself clear
Sorry, but I think that I am still not following you.
I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
Good luck,
Hunt -
Any suggestions on how to remove an "aura" from around a selection in an image? I shoot pictures at rodeos. To make the rider stand out, I create a mask around the rider and then blur the background with Gaussian Blur. This results in a noticeable blur around the outside of the selection. I have tried using Feathering as well as other Refine Edge Tools. The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful. So, my two big questions are: (1) Is there a better (simpler) way to avoid the aura? and (2) If not, is there a way to remove the aura that is simpler??
Thanks in Advance,
Art SchwartzSorry, what with the long title I had neglected the body of the message and your statement
The only thing that works is to go around the edge with the Clone Tool. This is time consuming and not totally successful.
seems to answer my first question.
Did you do that before or after blurring?
Have you alternatively tried using Content Aware Fill? -
Slide duration - How to make one slide have a different duration to another slide?
Slide duration - How to make one slide have a different duration to another slide?
EG So one slide has 2 seconds, another 4 another 6
All I can see is how to make all slides have the same duration
Any help very much appreciated!
BrianSlide durations are not changeable on a slide-by-slide basis.
-
How to make the zoom in/out scale appear in the media browser ?
How to make the zoom in/out scale appear in the media browser ? My videos only appear as a file list (only the names) and the zoom in/out device is currently not in the media browser...
I meant that there is no "Icon mode" button or "List mode" button in my media browser. How to make them appear ?
-
How to make a Colorful Gif Image for Holi
How to make a colorful Gif Image for Happy Holi 2014
Okay, I know this doesn't answer your question, but don't get me wrong. A logo is meant to be the way it was designed - upright, no flipping/ swiveling animation. Why exactly do you want to let your logo turn around?
If its to grab attention, why dont you consider animating the area on which your logo sits (header)? Or maybe add nice transitive slideshows on your main content area to add more interactivity? -
How to make selection parameter gray out, not changeble mode
Hi Experts,
Selection screen having parameters, I am putting default values in that parametrs.
How to make this parameter gray out, not changeable mode.
Thanks in advance
mahahe.
See comments below
Edited by: Rob Burbank on Jul 1, 2009 12:43 PMHi,
For the parameters required, while declaring them use the MODIF ID, lets say you have choosen the modif id as SC1.
i.e. parametes: p_mat type matnr DEFAULT '100' MODIF ID SC1.
Then in the initialization event, code as below.
LOOP AT SCREEN.
IF screen-group1 = 'SC1'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
It will work.
Regards,
Nangunoori. -
How to make it repleatedly printed out by using timer??
Dear Friends:
I have following code to run, When I press R to repeat println, only 1 line print out,
But I hope to make it continueously print out.
How to make it repleatedly printed out until I press CTRL + C key ??
Thyanks
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
int delay = 1;
Timer timer = new Timer();
ActionListener actionListener = new ActionListener() {
public void actionPerformed(ActionEvent actionEvent) {
System.out.println("Hello World Timer");
System.out.println("What do you want (Certain time or Repeat time)?");
System.out.print("Please enter \'C\' or \'R\' for that: ");
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String ans = in.readLine();
System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
if (ans.equals("C") || ans.equals("c")){
//System.out.println("This line is printed only once start...");
timer.schedule(new TimerTask(){
public void run(){
System.out.println("This line is printed only once.");
},delay,1);
else if(ans.equals("r") || ans.equals("R")){
timer.schedule(new TimerTask(){
public void run(){
System.out.println("This line is printed repeatedly.");
},delay, 1000);
else{
System.out.println("Invalid Entry.");
System.exit(0);
System.exit(0);
}The Timer is working fine, but because it runs in another Thread, your program is ending before the Timer can repeat.
The simplest way to make your program wait until it is force-quitted as you describe would be to make an infinite loop (although this isn't very good practice), like this:
else if(ans.equals("r") || ans.equals("R")){
timer.schedule(new TimerTask(){
public void run(){
System.out.println("This line is printed repeatedly.");
},delay, 1000);
while(true){} //This will make your main thread hang.
}A better way, though, would be to listen again with your System.in reader until they enter a letter that means quit. -
How to make one dvd from several camcoder dvd's
How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's? -
How do I change print preferences to print in black/white by default instead of color
how do I change print preferences to print in black/white by default instead of color
When you try to print, use COMMAND P, it should bring up a window similar to this you can select the preset there. It shoud remember the preset after.
-
i didnt make a rescue email address straight away and now i cant figure out how to make one
There are instructions for how to do edit or delete it (and you can add one via the same process) half-way down the page that you posted from :
You can edit or delete your rescue email address using the Apple ID website. To edit your rescue email address:
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field. -
SQL Query (updateable report) - Can't figure out how to make one
Hi folks,
Can someone tell me how to make a report where the data can be updated? Not an interactive report, a SQL report that selects only one row. The only options in the drop down I see are "SQL Query" and "SQL Query (PL/SQL function body returning SQL query)", but I have a report elsewhere that says it's type is "SQL Query (updateable report)", but I can't remember how to do it :(
Thanks very much,
-AdamHi Adam,
An Updatable Report is a "Tabular Form" - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB
Andy
Maybe you are looking for
-
I have the 1st generation ipod touch looking to trade for the new ipod touch or someone to give me money for the new ipod touch
-
What Swing UI framework is the best?
I am looking for a Swing UI framework that will do the following: 1. Render Swing UI in the client browser ( I think this is most likely done by Applet). 2. handle all event back on the server, including validating user input, button/mouse click, etc
-
I'm getting the following issue. From Lightroom, if I select "edit in photoshop CS5" and then complete some edits and re-save the file, I will get the 2 of 2 etc in my filmstrip. However, If I start to work on that image again in lightroom, any adjus
-
I know how to transition from one page to another but can't figure out how to create an action on load of that page. I would like the "click anywhere" button/text to fade in and out or move back and forth. I can create a second state in which it wi
-
AE motion stabilizing (not Mocha)
I am tracking motion in a clip in order to stabilize it. I'm using AE CS4's motion stabilizer (not Mocha). It's an aerial shot and so eventually the tracking box goes off screen. How do I continue to track the shot? The help manual is not clear (at l