How to: make one or two partions at a raid system?

Hey
how can i make one or more a partions at a raid system?
i will make the partions at a 250gb raid. one with 120gb for the bootsector, and the other for documents, etc.
is there a hwo to anywhere? dont find one?
please read my second question.... 2 raids at one mac pro?
regarads

O.K., i was looking the hole day to get that partions on a raid working.
to make the partions on each HD with the same volume, this is no problem. when you then create the first raid, works fine. but when you make the second raid, you get a massage, that this raid is not found.
then you see both raids at the disc utilty, but only at the first you seen the volumen down under, by the second not. the first works, the second is not avabiele.
so, now i have only one big mirrowed raid for my boot sector, and its runs fast, quick and without big noise... thats what i want, and the second big raid for my files.
2 raids at one mac pro with 4 hd. one with 2 x 250 gb hd for the bootsector, and the other with 2 x 500gb for files
thx to all, and you kappy
regards

Similar Messages

  • HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

    I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

    I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

  • How to add one or two photos without synchronise my 8240 photos on my ipad2

    How to add one or two photos without synchronize my 8240 photos on my ipad2 or iPhon4 ?
    Thank you

    Just add the photos to the folders/location that you last synced and sync them - as only the contents of the last photo sync remains on the iPad, you have to (re-)sync all the photos that you want on the iPad. In theory only the new photos will need processing by the sync process, so it shouldn't take a long time to sync (it hasn't for me when I've added a few to my 1500 photos in the past anyway). Not including photos in a sync is how you remove them from the iPad.
    Your alternative is to email them to yourself and then save them from the email, but they will only go into the Saved Photos/Camera Roll album - come iOS 5 in the Autumn you should then be able to move photos between albums.

  • Slide duration - How to make one slide have a different duration to another slide?

    Slide duration - How to make one slide have a different duration to another slide?
    EG So one slide has 2 seconds, another 4 another 6
    All I can see is how to make all slides have the same duration
    Any help very much appreciated!
    Brian

    Slide durations are not changeable on a slide-by-slide basis.

  • How to make one dvd from several camcoder dvd's

    How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize  my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
    The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
    Is there any soft on mac I could reauthor my DVD's?

    How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize  my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
    The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
    Is there any soft on mac I could reauthor my DVD's?

  • How to make project across two DVDs with one DVD menu

    Hi!
    I’m working on a large project (3 hours of video with about 10 chapters, over 50 pictures in a playlist, and special feature chapter) and wondering is it possible to make an project across 2 or more DVDs, but to have menu only on first one? I’d like to make an project that comes with menu only on first DVD and when you click on e.g. “special features” button, then you get the message “please insert DVD 2″
    Is it possible and how to make something like that?
    Thank you!

    I would have EACH DVD begin with a menu. Somebody will insert DVD 2 first no matter how you label things.
    Yes, you are right! People just don't want to read, but I'm making an animated menu in AE and it'll take about 300MB (rendered in .mpg). That is what I want to avoid on other DVDs to save some space. You just gave me an idea so I'll make some small menu for other one or two DVDs with just a few informations about what DVD is inserted and what DVD you need to insert if you want to watch something else from that project. Thank you!
    I just have to learn better Encore and its capabilities and limitations (if I have time )

  • Photoshop cc 2014 How to make one corner of image rounded

    I wish to make an image with one or two rounded corners. Can some one explain how this is done or point me to a tutorial that works.

    Now I see. You have to create a .png file with alpha channels enabled to have transparency on the corners.
    First of all open you image. After that double-click on the Background layer on your layer window to be able to rename it. That will allow you to delete any part of it. After that make a curve with pan tool in the shape you want your round corner to be. After making the path right button -> make selection from path. After you selection is made hit delete. Save you image for web Ctrl+Alt+Shift+S and choose .PNG as a type of file you want to save.
    This is generally.
    If you need details feel free to ask.

  • 100GB seperated in 2x50GB - How to make one 100GB HDD?

    Yesterday I bought my Toshiba Satellite A100-225. This notebook has an 100 Gb harddisk. But when I go to 'This/My computer' I see two harddisks. The C: and D: harddisk are both 50 Gb. But I would like to have just one 100 Gb. I have heard a little bit about partitions.
    Could my harddisk be partitioned? How can I make one 100 Gb harddisk of it? Is this advisable to do? I hope somebody could help me further.

    As far as I know all newer Toshiba notebooks are delivered with partitioned HDD. In my opinion you should leave it and use second (D) partition for data saving. In the case that operating system crashes you can delete just partition C and use it for new installation.
    Expert mode installation on recovery DVD allows you to install recovery image on defined partition. If you have just one partition and something goes wrong the whole content will be lose.
    The 100 GB is enough space and it can also be split on three partitions where the first one (C) will be used for OS and installation of different applications and other two just for data saving.
    I dont know how you want to organize it but you can do what you want. Very useful tool for HDD partitioning is Partition Magic.

  • How WLS makes one JMSServer leave or join a distributed destination?

    HI,
              According to the WLS documents for Distributed Destination:
              When one member becomes unavalibale due a server failure, traffic is then redirected toward other avaliable destination members in the set.
              Currently, I created two queues and defined two JMS Servers (JMSServer1, JMSServer2). These two JMS Servers are in same distributed destination (JMSDes1).
              My question is
              1) when the JMSServer1 is shutdown, How WLS marked it unavaliable? And How WLS makes it leave the JMSDes1? (If you can know where I can find the documents, it will be greate).
              2) After the JMSServer1 is recycled and is active, how WLS markes it avaliable and makes it join the JMSDes1 again?
              Thanks for any help.

    HI,
              According to the WLS documents for Distributed Destination:
              When one member becomes unavalibale due a server failure, traffic is then redirected toward other avaliable destination members in the set.
              Currently, I created two queues and defined two JMS Servers (JMSServer1, JMSServer2). These two JMS Servers are in same distributed destination (JMSDes1).
              My question is
              1) when the JMSServer1 is shutdown, How WLS marked it unavaliable? And How WLS makes it leave the JMSDes1? (If you can know where I can find the documents, it will be greate).
              2) After the JMSServer1 is recycled and is active, how WLS markes it avaliable and makes it join the JMSDes1 again?
              Thanks for any help.

  • How to make one-option dropdown list partial trigger?

    There are two dependent dropdown lists. when list one is selected, the other one will get the SelectItems according the value of list one. My question is: when there is only one selectiem in list one (and the hint 'Please select one..."), how to make it partial trigger in the second time? e.g. I first login and select the ONLY one choice in List one, and the List two gets the values. but the data in datasource updated, so I want to choose the List one again, and make the List two get the new values.

    Hi,
    create a JSF binding (Bindings property on the list component) to a managed bean. The in the code that would trigger the PPR, call
    AdfFacesContext.getCurrentInstance().addPartialtarget(theListBindingName);
    If you have a refresh button, then you could use declarative PPR
    Frank

  • SQL Query (updateable report) - Can't figure out how to make one

    Hi folks,
    Can someone tell me how to make a report where the data can be updated? Not an interactive report, a SQL report that selects only one row. The only options in the drop down I see are "SQL Query" and "SQL Query (PL/SQL function body returning SQL query)", but I have a report elsewhere that says it's type is "SQL Query (updateable report)", but I can't remember how to do it :(
    Thanks very much,
    -Adam

    Hi Adam,
    An Updatable Report is a "Tabular Form" - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB
    Andy

  • HT5312 i didn't give a rescue email address when i first made my account and now i can't figure out how to make one

    i didnt make a rescue email address straight away and now i cant figure out how to make one

    There are instructions for how to do edit or delete it (and you can add one via the same process) half-way down the page that you posted from :
    You can edit or delete your rescue email address using the Apple ID website. To edit your rescue email address:
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.

  • How to make one edge of a photo transparent

    Hi,
    I am doing a website and want to make one edge of a photo transparent to the background - such as http://www.aimeemann.com/
    Does anyone know how I would do this?
    Thanks much!
    Nic

    Double click the layer icon in the layers panel. Then hit the create mask button at the bottom of the panel (lower red circle). Then with the layer mask selected (upper red circle, notice the black outline shwoing you are working the mask, not the layer), use the gradient tool to make a gradient as shown in the icon preview. Then save for web as PNG24.
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1pTgqlM1shye4AuiOINeT6f1833CF0" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1pTgqlM1shye4AuiOINeT6f1833CF0_thumb.gif" border="0" />

  • Have multiple email accounts. How to make one the default account when using Send to Mail Recipient?

    We have multiple email accounts. How do I make one of the accounts the default sender address when we Send to a document to Mail Recipient? Or how can I change the order of the email accounts on Thunderbird that they appear?

    To change the default account, Tools/Account Settings, select the account in the left pane, then Account Actions/Set as Default.

  • How to make dbca see two instance?

    Hi,
    I have 2 Oracle 10gr2 instances running in one Linux AS4 machine, both started.
    Now I want to create 2 templet for 2 database using dbca, but from dbca I can see only one instance, How to make dbca see both?
    Thanks.

    Are both instances listed in your /etc/oratab file?

Maybe you are looking for