How to make one treeNode specified be invisible?

I want to make some nodes be invisible and some nodes be visible of a JTree.
I also can make the invisible nodes be visible again.
How to do?
Thank you for help!

yourTree.setCellRenderer(new yourTreeCellRenderer());Also, see Q6.2 of this FAQ:
http://www.cs.uu.nl/wais/html/na-dir/computer-lang/java/gui/faq.html

Similar Messages

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

Slide duration - How to make one slide have a different duration to another slide?

Slide duration - How to make one slide have a different duration to another slide?
EG So one slide has 2 seconds, another 4 another 6
All I can see is how to make all slides have the same duration
Any help very much appreciated!
Brian

Slide durations are not changeable on a slide-by-slide basis.

How to make one dvd from several camcoder dvd's

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to: make one or two partions at a raid system?

Hey
how can i make one or more a partions at a raid system?
i will make the partions at a 250gb raid. one with 120gb for the bootsector, and the other for documents, etc.
is there a hwo to anywhere? dont find one?
please read my second question.... 2 raids at one mac pro?
regarads

O.K., i was looking the hole day to get that partions on a raid working.
to make the partions on each HD with the same volume, this is no problem. when you then create the first raid, works fine. but when you make the second raid, you get a massage, that this raid is not found.
then you see both raids at the disc utilty, but only at the first you seen the volumen down under, by the second not. the first works, the second is not avabiele.
so, now i have only one big mirrowed raid for my boot sector, and its runs fast, quick and without big noise... thats what i want, and the second big raid for my files.
2 raids at one mac pro with 4 hd. one with 2 x 250 gb hd for the bootsector, and the other with 2 x 500gb for files
thx to all, and you kappy
regards

SQL Query (updateable report) - Can't figure out how to make one

Hi folks,
Can someone tell me how to make a report where the data can be updated? Not an interactive report, a SQL report that selects only one row. The only options in the drop down I see are "SQL Query" and "SQL Query (PL/SQL function body returning SQL query)", but I have a report elsewhere that says it's type is "SQL Query (updateable report)", but I can't remember how to do it :(
Thanks very much,
-Adam

Hi Adam,
An Updatable Report is a "Tabular Form" - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB
Andy

How to make a tabstrip visible and invisible again?

Hi
I have a GUI with Fields, Texts, Checkboxes, Radio buttons, a Button and of
course a tabstrip with 7 tabs.
Before I want to show some data in the tabs of the tabstrip, I have to fill the fields, check a radio button and checkboxes. After filled all entries needed, I will start
the preparation of the data with clicking on the button.
Before the click on the button the tabstrip has to be invisible. After the preparation
of the data I will make the tabstrip with its tabs visible.
All this is in the same dynpro (e.g. 0100). I don't build it together with to dynpros.
I tried with LOOP AT SCREEN ... ENDLOOP, but the tabstrip does not appear.
The only attribute accessable is "activetab".
How to make that happen?
Thanks for your help
Frowin

Hi
Suppose you have 3 screen:
- 1 main screen (100)
- 2 subscreen    (101, 102)
In the subscreen 101 you need to design your tabstrip (so you need to move your tabstrip from main screen), the subscreen 102 has to be empty.
In the PBO of screen 100:
PROCESS PBO.
MODULE SET_SUBSCREEN.
CALL SUBSCREEN SUBAREA INCLUDING V_REPID V_SCREEN.
In the module SET_SUBSCREEN, you insert the code you need to choose the right subscreen:
IF _SHOW = 'X'.
V_SCREEN = '0101'.
ELSE.
V_SCREEN = '0102'.
ENDIF.
The flag _SHOW is setted in PAI after pressing the button:
MODULE USER_COMMAND.
    CASE OK_CODE.
       WHEN 'SHOW'. _SHOW = 'X'.
Max
Edited by: max bianchi on Jan 9, 2008 5:03 PM

HT5312 i didn't give a rescue email address when i first made my account and now i can't figure out how to make one

i didnt make a rescue email address straight away and now i cant figure out how to make one

There are instructions for how to do edit or delete it (and you can add one via the same process) half-way down the page that you posted from :
You can edit or delete your rescue email address using the Apple ID website. To edit your rescue email address:
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field.

100GB seperated in 2x50GB - How to make one 100GB HDD?

Yesterday I bought my Toshiba Satellite A100-225. This notebook has an 100 Gb harddisk. But when I go to 'This/My computer' I see two harddisks. The C: and D: harddisk are both 50 Gb. But I would like to have just one 100 Gb. I have heard a little bit about partitions.
Could my harddisk be partitioned? How can I make one 100 Gb harddisk of it? Is this advisable to do? I hope somebody could help me further.

As far as I know all newer Toshiba notebooks are delivered with partitioned HDD. In my opinion you should leave it and use second (D) partition for data saving. In the case that operating system crashes you can delete just partition C and use it for new installation.
Expert mode installation on recovery DVD allows you to install recovery image on defined partition. If you have just one partition and something goes wrong the whole content will be lose.
The 100 GB is enough space and it can also be split on three partitions where the first one (C) will be used for OS and installation of different applications and other two just for data saving.
I dont know how you want to organize it but you can do what you want. Very useful tool for HDD partitioning is Partition Magic.

How to make one edge of a photo transparent

Hi,
I am doing a website and want to make one edge of a photo transparent to the background - such as http://www.aimeemann.com/
Does anyone know how I would do this?
Thanks much!
Nic

Double click the layer icon in the layers panel. Then hit the create mask button at the bottom of the panel (lower red circle). Then with the layer mask selected (upper red circle, notice the black outline shwoing you are working the mask, not the layer), use the gradient tool to make a gradient as shown in the icon preview. Then save for web as PNG24.
<br />
<br />
<a href="http://www.pixentral.com/show.php?picture=1pTgqlM1shye4AuiOINeT6f1833CF0" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1pTgqlM1shye4AuiOINeT6f1833CF0_thumb.gif" border="0" />

How WLS makes one JMSServer leave or join a distributed destination?

HI,
          According to the WLS documents for Distributed Destination:
          When one member becomes unavalibale due a server failure, traffic is then redirected toward other avaliable destination members in the set.
          Currently, I created two queues and defined two JMS Servers (JMSServer1, JMSServer2). These two JMS Servers are in same distributed destination (JMSDes1).
          My question is
          1) when the JMSServer1 is shutdown, How WLS marked it unavaliable? And How WLS makes it leave the JMSDes1? (If you can know where I can find the documents, it will be greate).
          2) After the JMSServer1 is recycled and is active, how WLS markes it avaliable and makes it join the JMSDes1 again?
          Thanks for any help.

HI,
          According to the WLS documents for Distributed Destination:
          When one member becomes unavalibale due a server failure, traffic is then redirected toward other avaliable destination members in the set.
          Currently, I created two queues and defined two JMS Servers (JMSServer1, JMSServer2). These two JMS Servers are in same distributed destination (JMSDes1).
          My question is
          1) when the JMSServer1 is shutdown, How WLS marked it unavaliable? And How WLS makes it leave the JMSDes1? (If you can know where I can find the documents, it will be greate).
          2) After the JMSServer1 is recycled and is active, how WLS markes it avaliable and makes it join the JMSDes1 again?
          Thanks for any help.

How to make one-option dropdown list partial trigger?

There are two dependent dropdown lists. when list one is selected, the other one will get the SelectItems according the value of list one. My question is: when there is only one selectiem in list one (and the hint 'Please select one..."), how to make it partial trigger in the second time? e.g. I first login and select the ONLY one choice in List one, and the List two gets the values. but the data in datasource updated, so I want to choose the List one again, and make the List two get the new values.

Hi,
create a JSF binding (Bindings property on the list component) to a managed bean. The in the code that would trigger the PPR, call
AdfFacesContext.getCurrentInstance().addPartialtarget(theListBindingName);
If you have a refresh button, then you could use declarative PPR
Frank

Have multiple email accounts. How to make one the default account when using Send to Mail Recipient?

We have multiple email accounts. How do I make one of the accounts the default sender address when we Send to a document to Mail Recipient? Or how can I change the order of the email accounts on Thunderbird that they appear?

To change the default account, Tools/Account Settings, select the account in the left pane, then Account Actions/Set as Default.

How to make one of the columns in my tabular an text item with popup lov

Hello,
I want to manually make one of the columns say for the deptno in my tabular form as on text item popup lov using apex_item package
and whenever user clicks on the text item popup lov, it should open up an dept table report and from which he/she needs to select
the deptno and this deptno should be returned into the text item popup lov column.
like for example: say if i have an emp table tabular form with all the columns and deptno column as an popup lov and when user clicks on this column
it should open up an new sql report(similar to popup lov window), the select statement for this would be
select deptno,dname,loc from dept order by 1;
And from this popup lov report whenever an user selects a particular deptno, the same deptno should be returned to my text item popup column in emp tabular form.
something like this
select
"EMPNO",
"EMPNO" EMPNO_DISPLAY,
"ENAME",
"JOB",
"MGR",
"HIREDATE",
"SAL",
"COMM",
APEX_ITEM.TEXT(3,deptno,20,50,'readonly=true') || '<img height="16" align="middle" width="16" style="vertical-align: middle;" alt="Popup Lov" src="/i/lov_16x16.gif"/>' deptno
from "#OWNER#"."EMP"
like i made my column as an text item lov and now I want to write an onclick event for the text item lov so that an popup window is displayed which is a sql report of the table dept (select deptno,dname,loc from dept order by 1;) and in this report i want to make deptno as an link so that when ever an user clicks on it
-- this value should be returned to my text item popup lov column deptno in the emp tabular form.
can anyone help me out with this issue.
thanks,

Hi,
Refer to the link for the detailed information on ALV Grid.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Hope it helps.
Regards,
Rajesh Kumar
Edited by: Rajesh Kumar on May 25, 2009 9:13 AM

Genius bar reservation needed - but how to make one??? its all changed!

Apple has changed their website and i can no longer make a Genus bar reservation , this is nightly infuriating as it used to be so simple , now they won't let me through and are trying to make it on line support etc, i def need a reservation to sort out i phone issue, please can someone tell me how to make a reservation now? i have been on this for day!!!

Somehow, you posted your iPhone issue in the support forum for Apple routers.
Open the link below
Find the store near you
Click to start the reservation process
http://www.apple.com/retail/storelist/

How to make one treeNode specified be invisible?

Similar Messages

Maybe you are looking for