How to make original N80 voip enabled?

Since the voip is available for the N80ie(internet edition),I wonder if nokia will make the voip available for the original N80,since both the the N80 have same features.Wouldnt it be great to include voip in the next firmware update for nokia N80?

Though note that the N80 to N80ie upgrade is not yet available for all networks - at least, it wasn't available for Voda UK when I checked on Monday or Tuesday.
Re the original question, a very quick search would have come up with the following:
For the voip , try
http://www.fring.com
and/or
http://www.gizmoproject.com/
http://gizmovoip.com/learn/Message Edited by patc on 08-Mar-2007
09:44 AM

Similar Messages

  • How to Make the fields Delta enabled or Change pointer enabled in R/3

    Hi ,
    I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled i.e. when these fields change in R3 it does not write to Change Pointers ( and hence no delta ). For this reason every week we have to do a full load which takes very long.
    Can any one suggest how to make this fileds delta enabled or how to know weather these fields are writing the Change pointers or not in R/3 when they change?
    Regards,
    Vishnu

    Hi Vishnu,
    In your case you need to build the logic for your custom fields as you have enhanced the Business Content DS..
    The way you can build the logic would be using the CDHDR and CDPOS tables if the changes are recorded in those tables.
    The above tables contain any changes done to any documents..
    Let me know if it helps..
    Best Regards
    Avinash

  • Hi Experts.. How to make scripts & SmartFrom Unicode enable

    Hi Experts..
    How to make Scripts & Smart From Unicode enable? i know for scripts we need to check with driver program & 
    For smart from we need to check the generated function module. Correct me if am wrong. 
    I wanna to know how to make layouts & from Unicode conversion....or enable??
    Thanks In Advance
    Santosh.S
    Points for sure ...

    Hi Donghai,
    Have you tried using the command
    CHAIN ENDCHAIN.
    Try displaying the message for te field you wish to within CHAIN and ENDCHAIN which will allow you to enter the data in the field even after the error message is displayed.
    Caution: Mention all the field names in CHAIN and ENDCHAIN which you want to be open for enterin the values into it.
    Thanks and Regards,
    Kunjal Patel

  • How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

    Hi Experts,
    I need help.
    I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only)  even in Display mode. How to make the field is non editable in display mode and editable in change mode.
    I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
    How to make this field to behave as standard fields?
    Please reply me <removed by moderator>
    Thank you in advance.
    Best Regards,
    Divakar.
    Edited by: Thomas Zloch on Mar 2, 2012

    If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
    lv_changeable = im_header->is_changeable( ).
      LOOP AT ch_fieldselection ASSIGNING <fs>
        IF lv_changeable IS INITIAL.
          <fs>-fieldstatus = '*'. " Display
        ELSE.
          <fs>-fieldstatus = '+'. " Change
        ENDIF.
    endloop.

  • How to  make a good voip server +applet ?

    Here is my applet wich I made http://84.244.8.225/test.html
    It works a bit
    Here the code:
    http://84.244.8.225/javamic4.txt
    Any ideas/suggestions to make it better...
    (for example how to make a good server (windows) ?)
    Thx!
    Edited by: FrederikPot on Sep 24, 2007 3:01 PM
    Edited by: FrederikPot on Sep 24, 2007 3:03 PM
    Edited by: FrederikPot on Sep 24, 2007 3:07 PM

    Hello Thanks for your replys and sorry for being so fussy about this.
    I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
    I have the Nero Vision 4.9.6.6  But I may be able to look for another one if you think it is better...
    Thanks a lot for your advises...

  • How to make function module remote enabled?

    I am trying to make the RSCRMBW_GET_CELL_DATA_BAPI function remote-enabled by choosing remote-enabled in the attributes tab in the function builder. When I try to activate the function, I get an error telling me that Reference parameters are not allowed with RFC. In order to get around this, I set each of the import parameters to pass value. This time, I get an error for Generic types not allowed in RFC. I change the I_NO_TEXTS type from C to CHAR50. Finally, I get an error for Type RSCRM_BAPI6111CD_LARGE_T is unknown. I am able to see this type in both the RSCRM type pool (to which the 'unknown' type belongs) and CL_RSCRMBW_BAPI>GET_CELL_DATA_V2 method (which calls the function). However the function builder still tells me that the Type RSCRM_BAPI6111CD_LARGE_T is unknown.

    Hi,
    You need do this in a work around way. My suggestion is you need to create wrapper function module (RFC enabled) with same paramters of fm RSCRMBW_GET_CELL_DATA_BAPI and inside this function module pass these parameters and call  fm RSCRMBW_GET_CELL_DATA_BAPI, then there is no need to change fm RSCRMBW_GET_CELL_DATA_BAPI
    a®

  • How to make a window disable/enable in run time in webdynpro application

    Hi all,
    1) my requirement is in run time i want to make the content of a window in disable mode?
    2)  and again it should display in enable mode when we perform some action?
    thanks & regards
    naveen
    Moderator Message: This has been covered numerous times in this forum. Also, the forum is not a free consulting service here to do your job for you.
    Thread locked
    Edited by: Neil Gardiner on Nov 22, 2010 9:27 PM

    Hi,
    You will not be able to do this with a standard radio button, as each one will be in a separate instance of the row.
    The easiest way is to use a checkbox (as you can script this on/off) and then make it look like a radio button.
    Example here:
    https://acrobat.com/#d=sasUNmniOUgs3MwY-p4H8Q
    Hope that helps,
    Niall

  • How to make my N80 read websites that uses Indic U...

    Is it possible to get my N80 read the websites written in Indic Unicode text... Currently I see only squares instead of the text... Also I see squares in Indic language messages.. Can I have a font that supports Indic languages?
    N80 IE, E51, E71

    I copied some Malayalam Unicode fonts to e:\resource\fonts and yes, the squares are replaced by the Malayalam characters. There is no rendering support yet though, as my firmware is from MiddleEast.
    I hope Nokia will consider adding "Uniscribe" support in the newer firmwares, just to "read" the data.
    N80 IE, E51, E71

  • UIX:train - how to make all links available/enabled

    Is there a way that I can default all of the links in a uix:train to be enabled, rather than just the next link after the selected Index? (selectedIndex+1)
    I tried using the disabled attribute and setting each link to disabled="false", but that doesn't work.
    <uix:train value="1" formName="PersonalInfoForm" formSubmitted="true" id="piTrain" >
    <uix:contents>
    <uix:link text="Account Search" />
    <uix:link text="Basic Account Detail" disabled="<%=disabledFlag%>" />
    <uix:link text="Distribution Detail" disabled="<%=disabledFlag%>" />
    <uix:link text="Data Permissions" disabled="<%=disabledFlag%>" />
    <uix:link text="Report Permissions" disabled="<%=disabledFlag%>" />
    </uix:contents>
    </uix:train>
    Thanks!
    -Teri Kemple

    No, a train is meant to handle sequential processes. To handle things in parallel, you can use a tabBar or a subTabLayout.

  • How to make screen field enable when table control gives an error

    Hi,
        I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
    How to make the other parameter enable when table control throws an error.
    Regards,
    Jaya

    Hi Gobi,
         Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
    For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
    as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
    please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
    Thanks
    Jaya

  • How to make enhanced fields of data source delta enabled?

    Hi ,
    I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
    So running full load every week is taking more time.
    Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
    Any help will be greatly appriciated !
    Thanks & Regards,
    Vishnu

    HI,
    It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
    The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
    If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
    You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
    Then, you can mix both datasources in a DSO in BW.
    You can look for a " how to create generic datasources which use delta queue"
    I hope it helps

  • How to make enable UI elements Check box

    Hi ,
    I am creating UI elements Check box in a view dynamically at runtime.
    But its is in uneditable mode.(gray out)
    my Code:
    IWDCheckBox cb1 = (IWDCheckBox)view.createElement (IWDCheckBox.class,optdetials[1]);
    cb1.setText(optdetials[2]);                    
    root.addChild(cb1);
    Now my problem is how to make this check box enable.
    and aslo tell me how to create Radio button dynamically.
    Thanks
    Ravi

    Hi Ravi,
    Go through the following
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/developing%20web%20dynpro%20user%20interfaces.pdf
    Follow the below steps:
    1. Create a ValueAttribute "ChkGroup" and following valueattributes under the above valueattribute
    check (boolean)
    text  (string)
    2. Type the following in init() method
    IPrivate<<VIEW>>.IChkGroupElement ele=wdContext.createChkGroupElement();
    ele.setCheck(true);
    ele.setText("1");
    wdContext.nodeChkGroup().addElement(ele);
    IPrivate<<VIEW>>.IChkGroupElement ele1=wdContext.createChkGroupElement();
    ele1.setCheck(true);ele1.setText("11");
    wdContext.nodeChkGroup().addElement(ele1);
    3. Write the following in wdDoModifyView() method
    IWDCheckBoxGroup grp1=(IWDCheckBoxGroup)view.createElement(IWDCheckBoxGroup.class,null);
    grp1.bindTexts("ChkGroup.text");
    grp1.bindEnabled("ChkGroup.check");
    <<Container>>.addChild(grp1);
    Regards, Anilkumar
    Message was edited by:
            Anilkumar Vippagunta

  • How to make icon_checkbox enable in ALV list

    Hi,
    I am using the checkbox icon (icon_checkbox) to write into my ALV by using this FM REUSE_ALV_HIERSEQ_LIST_DISPLAY.
    The output of the ALV will be like this:-
    header-                        | Col A    | Col B      | Col C      | Col D
    line item1-                     chkbox   1               456          789
    line item2-                     chkbox   2               xyz          kkk
    The first coloumn (Col A) is the checkbox.
    I am facing problem when using icon_checkbox to display it at the ALV. Currently my checkbox is showing all check in all item and I can't check and uncheck it.
    My question is:
    1. Is it possible to make the checkbox enable/editable by writing the icon_checkbox?
    2. How to make the checkbox enable/editable?
    Thanks for your time for reading this. Let me know if more info is needed.

    This can be done one of two ways:
    1. Customize the form in Infopath, right click your field and disable the control.
    2. Use JavaScript/jQuery on the page to disable the element.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • My  MacBook is not communicating with my desk top to enable printing from my MacBook. I need to find out how to make that happen. I have a static IP address on my desktop but don't know what to do on the Mac Book.

    My MacBook is not connecting to the host computer for the printer. The host computer has a static IP address which is different from the IP address that the laptop is looking for. How do I change the laptop so that it looks for the host computer's correct IP? The laptop is connected to the router. I know this because I can get on the internet with the laptop.

    The host computer is Dell and the operating system is Windows 7.  The printer is an Epson, and it is wired to the host computer with a USB cable. It does have host printing turned on.
    The three have been working harmoniously for a long time.  The router had to be reset; and after that, the MacBook documents would no longer print.
    We created a new static IP address on the Dell but the MacBook is not recognizing it.  We have researched the internet trying to figure out how to make the MacBook locate and recognize the correct IP address from the Dell so they can communicate with each other.  The laptop is not communicating with the host computer because is is looking for the wrong IP.  The host IP is 192.168.1.245 and the laptop is looking for 192.168.15.237.
    I hope everything is clear.  The person who originally set it up is no longer available to help me.  Thank you for any help you may give me.

  • How to make a original frame same with Comment List and Attachment?

    How can I make original frame looking like Comment List?
    I'm using Windows XP and Adobe Acrobat 9 Pro and Acrobat 9 SDK.
    I want to make a new plug-in that use a new frame.
    The new frame is looking like Comment List and Attachment.
    I want to show my original list and input form to the frame.
    It is close to Comment List frame, but I want to show original list.
    Additionally, I want to add new button upper of Comments Button on Navigation Button Panel.
    Can I have any help?

    There is no support in the SDK for adding your own panels.
    There is no support for modifying the existing panels.

Maybe you are looking for

  • Full Width Composition Slideshow

    I know you can have a slideshow that is full width but I want a slideshow with Targets, not thumbnails, which I normally use a Composition.  But when I select the Composition the Full Width button is not available.  Is this a future feature?  Is ther

  • Homesharing isn't working on my mac or apple tv.

    The airplay icon has also disappeared. I've checked and both devices are connected to the same wifi. The software on both devices are completely uptodate. I've tried switching both devices off and on again. I've no idea what else to try. Any ideas?

  • How to load jspx page in a ADF popup componenet

    Hi, I am using the jdeveloper11g ,Oracle ADF component's .I met with a problem while i am trying to load the page In ADFPOPUP component. .while i am able to load the component's in the ADFPOPUP why can't i Load jspx page in ADFPopup and have my appli

  • [SOLVED] Firefox - silent fail

    Last thing I did before shutting down on Friday night (UK time), I upgraded. Since I've tried to run Firefox after that, it fails silently. The two events may not be connected, but it's the only thing I can think of that may be the cause. The package

  • Fireplugs from Component Controller

    Is there a way to call a fireplug method like wdThis.wdFirePlugToUsersView(); but from a component controller instead of a view controller? Or how I'm suppose to do this?