How to make Outlook 2013 calendar only show specific hours and hide the others that are grayed out

I’d like to show 7am to 10pm thus allowing the rest of the day to be less cramped vertically on my screen.  I don't want to see all the grayed out hours which are
outside of business hours.  How can I do this?

Right click on the time scale and choose the next smaller scale. It may not help much since 7 -10 is a fairly long period, although with 30 min and the ribbon minimized, i see 7a - 11p on a 24" monitor. You may need to set 7 as the start of your business
day. If you have it set later in options, outlook will start the day at the later time.
I have screenshots here -
http://www.outlook-tips.net/tips/tip-503-display-work-hours/
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Similar Messages

  • I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

    If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
    Then File menu > Browse in Bridge will bring up Bridge CS6.
    If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
    I hope that's the answer you were looking for.
    Gene

  • I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

    I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

    Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
    Mac OS X: Gray screen appears during startup
    Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

  • I have duplicative song files in my library that are grayed out.  This seems to cause a syncing problem to my ipod or iphone.  How can I clean up this mess?

    I chose to let iTunes rearrange my files and it appears to have duplicated them in my computer's drive.  So now I have the same folders/files directly under my D drive (second computer hard drive) and also in the iTunes Music Folder that iTunes created.  Wasn't sure what to do so I did another import and now I have files in my library that are grayed out with the small i symbol in the circle next to them.  I also have the working (bolded) files too.  How can I clean this up?

    Musicman05 wrote:
    Is there a way to override the 256kbps "conversion" when uploading to iCloud? 
    No. All music that is mirrored in the cloud will be AAC@256 Kbps.
    Musicman05 wrote:
    Along the same lines, if I "download" a song from my library to my iPhone, then plug my iPhone into my computer and sync the song file from my computer, will the higher quality original file overwrite the 256 one? 
    No, because with iTunes Match enabled on an iOS device traditional syncing of music via USB is disabled. All music management is done directly on the device.
    Musicman05 wrote:
    Also, if I want to syncronize another computer using iTunes match, how can I get the higher quality audio files?  Will I simply have to transport all of them by an exernal hard drive or thumb drive?
    You will first have to copy the high-quality audio files to the computer, add them to the iTunes library then enable iTunes Match.

  • I understand that many versions of any pictures are still on my computer (Masters???).  If I have a final I like, how do I delete all the others that are taking up space?

    I understand that many versions of any pictures are still on my computer (Masters???).  If I have a final I like, how do I delete all the others that are taking up space?  I have already put the originals into albums, edited them, and renamed them.  Can I/should I delete all other versions located in Masters, I think?  If I want to keep events, but want them to include the newly edited albums, can I delete the specific event and somehow bring the photos used in the album into a new event.  Understand iPhoto just keeps space or manages photos, so how can I have events that include the edited pix and clean up disk space.  Thanks.
    iPhoto 11 v9.4.2
    using Lion, updated, on iMac Pro.

    It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
    If space is an issue... use an external disk.
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • TS2972 used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10.  Now with V11, cant find the button that compares two libraries and finds the songs that are different.  Anyone know how to do th

    Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10.  Now with V11, cant find the button that compares two libraries and finds the songs that are different.  Anyone know how to do this now?

    Jneklason wrote:
    ~snip~
    I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
    On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
    I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
    I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

  • How do I open documents that are grayed out?

    How do I open documents that are grayed out?

    Do these files have a file extension (e.g. .dmg, .jpg, etc.)?
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Why does Startup Manager only show Recovery HD and not my other drives like Macintosh HD and my USB drive?

    I'm not really sure what happened to my Mac but when I start it, it only shows Recovery HD and nothing else.  I tried re-installing Mountain Lion through my Apple ID but it states that I have not purchased it and will not let me proceed.  I have bought a usb drive that has Mountain Lion, since I cannot purchase it in the apple store, on it to install it from there but I cannot boot into my USB because it only shows "Recovery HD" in Startup Manager.  I would really appreciate some input from you all, thank you for your time in advance. 

    Either your drive is failing or has been corrupted. Please try the following. You cannot do the following unless you have purchased Lion or later. From your post that's not clear. Without knowing your exact model I cannot tell you what to do.
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
        Note: You will need an active Internet connection. I suggest using Ethernet
                    if possible because it is three times faster than wireless.
    If your computer is a 2010 or earlier model, then you should be able to do the following:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have downloaded itunes onto my newly restored laptop and now the songs that are on my ipod arnt in my itunes library how do i get them back into my itunes library?

    my computer had to be restored and i lost everything on my computer and i had to redownload everything including itunes and now the songs that were on my ipod arnt in my itunes library i need to know how i can get them back into my library or if i even can

    Download Past Purchases
    http://support.apple.com/kb/HT2519
    Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

  • How to make Outlook 2013 automatically download all emails?

    I have four IMAP email accounts. Currently, my Outlook 2013 only shows new emails when I navigate to the folder they are in. For example, if I navigate to my work email inbox, it suddenly fills with new emails.
    Previously, in Outlook 2010, this would be automatically downloaded and the inbox would be refreshed to show a new email. How can I make this happen in Outlook 2013?

    Hi,
    Please check your settings:
    FILE-> Options-> Advanced -> Send and receive, check "Send immediately when connected"
    Also, you could set advanced option throught clicking "Send/Receive..."
    If the issue persists, please repair your OST/PST file through SCANPST tool, then check the result:
    http://support.microsoft.com/kb/272227
    Best regards,
    Karen Hu

  • How to make SharePoint 2013 search only in document content?

    We are using SharePoint 2013 environment and are facing following issue while doing search in the document library.
     There is  one document library named “MYDOC” .and it has two columns name ‘DocTitle’ and ‘DocTag’.. Although we are able to perform search on basis of document metadata and content, however we only want to search through the content of documents
    in the library and not on the basis of document metadata (like ‘DocTitle’ or ‘DocTag’ columns). Is there a way to restrict search to document content only and not metadata?
    Excluding the column name will not help since, if the searched keyword is exists in metadata as well then that item of library will not come in result. Is there any way of writing query in such a way that only document content will get queried?
    -Aditya

    Addition to the above,
    Show or hide content from lists or libraries in search results
    As a site owner, you can decide whether items in lists and libraries on your site are included in search results. By default every list and library is set to include all items in search results.
     Note    To change this setting, you must have the Manage Lists permission level. The Designer and “Site Name” Owner groups contain this permission level. When you do not have Manage Lists permissions, the menus
    described in this procedure are not available.
    Navigate to the site that contains the list or library that you want to change.
    Locate and click the list or library you want to customize.
    Click Site Actions, and then click Site Settings.
    Under Site Administration, click Site Libraries and lists.
    Click an item from the list, for example, Customize “Shared Documents.”
    On the List Settings page, under General Settings, click
    Advanced settings.
    In the Search section, under Allow items from this document library to appear in search results, select
    Yes to include all of the items in the list or library in search result or
    No to exclude all items from search results.
    http://office.microsoft.com/en-in/sharepoint-server-help/enable-content-to-be-searchable-HA010379092.aspx

  • How to make a field read only at run time by entering the value in another field.

    Hi Team,
                  Recently i got a requirement , i Have 2 dff's at header level and line level related to down payment ,and the DFF having two fields such as amount and if i enter amount that should be converted into % then populate the total amount field, at the same time % field should be gray out . if i give %(percentage) then amount field should be grayed out(read only) and then it should populates towards the total amount at header level.
    Can any one help me on this issue.
    Thanks,
    raghava

    I would to elaborate this issue...
    I have DFF's enabled at Header level and line in Purchasing Module -->Buyer WorkBeanch --> Order page here they did, as "Details". Details contains two Filed's
    1. Amount
    2.Percentage (%)
    Requirement :
    i.if i enter "down payment amount" then "down payment %" going to become read only. vise verse.
    ii. If I enter "down payment amount " or "down payment %" at header level then not allowing to enter at line level .
    thanks,
    raghava

  • Outlook 2000 calendar sync with one hour difference into the iPhone

    Good morning,
    I've two iPhone (one 3G and one 3GS) and both have the same issue. When I sync them with iTunes everything works fine but when I check the calendar entries on my iPhones everything is one hour later than the ones on my Outlook 2000. I've already checked the GMT setting on both Outlook and Windows, also the iPhone sync with my computer time and GMT when I connect it to the docking station so they are always the same.
    Anyone has an idea about what is going wrong? Or is just a Outlook 2000 sync issue since I recall to have read somewhere that it's not a supported version?
    Thanks for your time.
    Kind regards,
    DocTooth.

    Outlook 2000 is not supported. For contacts, these are the only supported Windows applications: Outlook 2003 & 2007, Windows Address Book (Outlook Express), Vista Windows Contacts, Yahoo! Address Book, Google Contacts. For calendars: Outlook 2003 & Outlook 2007.

  • How can I open Internet explorer only pages on a mac? The website that I need to access only permits internet explorer

    How can I open Internet explorer 'only' pages on a mac, without creating a drive partition and installing windows separately?
    I've tried winbottler, but it doesn't seem to serve my purpose. The web site that I'm trying to access only permits Internet explorer.

    Microsoft has not written IE for Mac for years so unless you want to create a parition and install Windows, or user a Windows emulator, you're out of luck for installing IE on a Mac.
    The web site that I'm trying to access
    There might be a work around for you since it's just the one site.
    Go to the Safari menu bar click Safari > Preferences then select the Advanced tab.
    Enable the Develop menu.
    Now click Develop from the Safari menu bar then click User Agent > IE 9, 8, or 7

  • My itunes will not let me download the music that I purchased on my phone to itunes. So the music show up in itunes but when I go to download it the songs and the download symbol are grayed out. How do I fix this?

    I want to upgrade my phone to the new software and it says that I have purchases from my phone not added to my itunes library, so when I go to the songs they are all grayed out and I cannot download. So please help me.

    Best route would be to shutdown the computer and restart from cold.
    Make a secure backup of your Songs.
    Uninstall iTunes.
    Install the latest version of iTunes.

Maybe you are looking for

  • Images in Tilelist not actual size

    I am pulling urls from my database and having them and a small caption populate a tilelist. The images vary in size and I am wanting them to show up their actual size and will have 1 row in the TileList and just scroll horizontally to view the images

  • Urgent:1099 for certain vendors!!!!!!!!!!!

    Hi, User requirement here is , they want to use 1099 for certain vendors like contractors, some employees without the withholding tax code. Could anyone suggest me how to do this in vendor master records. Thanks

  • Upgradation Steps from OBIEE 11.1.1.3 to 11.1.1.6

    Hi friends, Im following the below link for upgrading my obiee 11.1.1.3 to 11.1.1.5 http://docs.oracle.com/cd/E23943_01/bi.1111/e16452/bi_plan.htm#BABECJJH In that they asked to follow the following 11 steps to accomplish, and those are "Perform Gene

  • How can we copy the file in to the importdp/exportdp location

    How can we copy the file in to the importdp/exportdp location after doing the import and export activity.?

  • Ghost files on Apple TV

    I podcast the NBC & CBS Evening news and there are some old files that still appear on my Apple TV list even though they have been deleted from the iTunes library.  I checked the actual iTunes library folders and cannot find were these files are loca