How to make Page View Mode user dependent?

Greetings!
In our company there are a few developers working with Apex. Now some prefer the new "Tree View"-view on the page layout, I prefer the old "Component View" and often each one has to switch back to his own setting, because someone else changed it and we all log in under the same admin login. So to avoid this I am wondering how to keep the settings, that are set on one workstation. Is this depending on the user, so when our chief-admin creates another user for me, my settings will not affect the others? Or is there a way, that apex can store the settings for an individual id-address?
I hope this made clear what I am thinking about. :)
Thanks für advise,
Tobi

This is a user preference. For this—and a whole load of other excellent reasons—you should have individual user accounts.

Similar Messages

How to make session invalid when user refresh the page?

How to make session invalid when user refresh the page?

I have a <form> in a JSP file that has another JSP file as an action.
I have main.jsp that has <form> with action.jsp file as an action.
Now when I submit the <form>, request forwarded to action.jsp and it will take the action. But this file is taking so long, hence user refresh the page again and again, hence duplicate request processing is occuring.
I want to prevent this.

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How to share Pages with other user accounts

How to share "Pages"with other user accounts

When you install it, do it for "Everyone" or in the Admin account.
Peter

Blank user displayed in the "Page Views Per user"

Hi everybody,
When I display my Application "Page Views By user" statistic bars digram (by going through
Home>HTML DB Workspace Administration>Monitor Activity>Page Views by User), I have a blank username that is displayed with a certain number of page views. Does anybody know what this comes from?
Thanks!
Karina

Visits to the standard login pages will be recorded this way.
Scott

How to make Scroll viewer zoom disable

how to make Scroll viewer zoom disable in windows store app

Hi Imtiyazk,
Thanks for sharing the solution, should help others have the same issue.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I display a PDF in Fit-Page View mode in Firefox?

I would like to use Firefox to view PDF documents from the web - but cannot get the PDF fit-page view to be a Firefox option. For large PDF files, I then have to scroll slowly through them - whereas in Adobe Reader, I can view them page by page and scan through it much quicker.

If you just purchased Acrobat 10, you might be eligible for a free upgrade to Acrobat 11, which is suppposed to have much improved export to PPT.

How to make Help view well on both laptops and desktops

Hi -- I'm trying to learn RoboHelp 7 and just created my first WebHelp project. I want to show it to a friend, but don't have a server I can publish it to, so I copied all the files onto my flash drive and put it on my laptop. It all works fine, which is a relief -- however, the custom colors are way off, and some of the screenshots are now too big, so the user would have to scroll (which can be annoying). I created it on my desktop and have been looking at it on a larger monitor (1680x1050), but the laptop is old (1024x768). The thing is, a lot of people might have to view it on 800x600.
I couldn't find any information in RH's Help about how I should have set it up so that it views well on different systems. I'm hoping someone could please advise me as to what I should have done, and if there's anything I can do now to fix it, or point me to some information. I used Arial 10 pt for the text, and now it looks 12 pt. Should I have made it 8 pt? Is there a rule for how large an image should be to be viewed on a laptop and a desktop?
One last thing, it's too large to put on a CD, so is does anyone know how to make this into an executable?
Thanks in advance for any help you can give!
Daryl

Hi Daryl
I use an eBook compiler to convert WebHelp to an executable file. You might investigate eBook compilers for that bit. However, I'm not sure how that would help you since a compiler will do little more than to take a swarm of WebHelp files and store them in a wrapper to create a single file. Generally you will end up with something that although it exists as a single file, is larger than what is inside.
Are you SURE it's too big for CD? CD will hold 650 megs (700 if you buy the extended types).
On the screen size issue WebHelp itself should adapt fine. Probably it's the images you are concerned with. And the general rule of thumb is to capture images at a reasonable size to begin with. Never EVER just insert a big ole image into RoboHelp and grab the sizing handle to make it smaller. It will still consume a larger amount of space and the quality will suffer badly. So the best approach is to copy the image at a reasonable size to begin with. Something that may fit nicely in the Topic Pane area as it is presented in the space provided by the lowest common denominator. In your case I believe you said that many are still at 800x600.
Your 10 point text will still be 10 points at a smaller resolution. It will just look a bit different.
Hopefully this helps... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How to make pages page horizontally in acrobat

Hi there.
Is there a way in Acrobat to make pages page horizontally? Similar to an ‘island spread’ in indesign! I need to view a series of pages horizontally, as this will best simulate the way that I will be presenting these pages when pinned up...
Thanks,
Craig

Depends on how you set up your ID file. If you have set up your document as 11 x 8.5 (horizontal/landscape) the resulting pdf exported sould be the same. If you have an 8.5 x 11 Document, Portrait, the exported pdf should be likewise portait.
If you printed to PDF Printer (and you should have exported instead) these results could be overridden by the page orientation.
If you have an Acrobat file, whose pages need to be rotated permanately, not just for a particular view instance, rotate them from the Acrobat Navigation Pages Panel.
Page>Rotate Pages (or Shft+Ctrl+R)

Single page view mode in Acrobat Reader on android

Is there a way for a pdf to dictate the view mode used in Acrobat Reader on a smart phone? By default I believe it is set to continuous however I would like it to automatically change to single page when my pdf is opened.

Mark -
You are correct.
In Acrobat Reader on my PC, I'm highlighting text and then adding a sticky-note comment to it.
So, if I just insert a sticky note comment without highlighting the associated text in the document, I can see the sticky note when I view the document on my android device - - just tested this and it works!
OK - I can live with that, but it would be good if the combination of highlighting AND sticky notes were visible when viewin the document in Android - the highlightimg feature makes it clearer to what piece of text the sticky bote relates to. Hope it can be incorporated in a furure release.
Thanks for clarifying the situation for me.

Please Suggest, How to make this view efficient ?

Hi there,
Could you please suggest me,how to make the following VIEW (QUERY) efficient regarding performance point of view.
CREATE OR REPLACE VIEW XXX_TRX_TO_NUM_V
(ROW_NUM, ORIG_TRX_NUM, TRX_NUMBER, TRX_DATE, PURCHASE_ORDER,INTERFACE_HEADER_ATTRIBUTE6, INTERFACE_HEADER_ATTRIBUTE1, INTERFACE_HEADER_ATTRIBUTE5, BILL_TO_CONTACT_ID, REMIT_TO_ADDRESS_ID, BILL_TO_CUSTOMER_ID, BILL_TO_SITE_USE_ID, ORG_ID)
AS
Select rownum row_num,trx_number orig_trx_num,to_number(a.trx_number) trx_number,a.trx_date,a.purchase_order,a.interface_header_attribute1
,a.interface_header_attribute6,a.interface_header_attribute5,a.bill_to_contact_id
,a.remit_to_address_id,a.bill_to_customer_id,a.bill_to_site_use_id,a.org_id
from ra_customer_trx_all a
where a.trx_number is not null
and a.trx_number not in
(select trx_number
from
(select rownum,/*+ ALL_ROWS ,16 */ r.trx_number,ltrim(rtrim(translate(/*+ ALL_ROWS ,16 */ r.TRX_number,'0123456789',' '), ' ' ), ' ' ) tx
from ra_customer_trx_all r)
where tx is not null)
order by trx_number
Thanks in Advance !
Shahzad

I think you have the hints in the wrong place - as far as I was aware, the hint had to come straight after the SELECT/UPDATE/INSERT/DELETE key word - but I could be wrong as I've never really tried it elsewhere. Also, unless the optimiser mode for your database is set to FIRST_ROWS or RULE (god help you!:), ALL_ROWS is the default behaviour.
Basically what you are trying to say is bring me back all ra_customer_trx_all rows that have purely numeric trx_numbers right?
Why, if you need to be able to represent trx_number as a number, do you have non-numeric data in there???? That's a bit dodgy isn't it?
Anyway, what about:
CREATE TABLE dt_test_num (id varchar2(10))
insert
into
     dt_test_num
select
     chr(47 + rownum)
from
     all_tables
where
     rownum <= 20
select
     to_number(id),
     id
from
     dt_test_num
where
     translate(id,'0123456789',' ') IS NULL
update
     dt_test_num
set
     id=id||chr(67-rownum)
select
FROM
     dt_test_num
select
     to_number(id),
     id
from
     dt_test_num
where
     translate(id,'0123456789',' ') IS NULL
/Also, you are selecting rownum and aliasing it. Why? rownum will be assigned before the sort.
HTH
David
Message was edited by:
david_tyler
Hello
Slight correction to the where clause. Art first I thought you didn't need the trim on there, but that was just down to the number sequence in translate...
SQL> select nvl(translate('1A','1234567890',''),'NULL') from dual
2 /
NVL(
NULL
SQL> select nvl(translate('1A','1234567890',' '),'NULL') from dual
2 /
NV
A
SQL> select nvl(translate('1','1234567890',' '),'NULL') from dual
2 /
N
SQL> select nvl(translate('2','1234567890',' '),'NULL') from dual
2 /
NVL(
NULL
SQL> select nvl(translate('2','0123456789',' '),'NULL') from dual
2 /
NVL(
NULL
SQL> select nvl(translate('1','0123456789',' '),'NULL') from dual
2 /
NVL(
NULL
SQL> select nvl(translate('0','0123456789',' '),'NULL') from dual
2 /
N
SQL> select nvl(TRIM(translate('0','0123456789',' ')),'NULL') from dual
2 /
NVL(
NULL
SQL> select nvl(TRIM(translate('1','0123456789',' ')),'NULL') from dual
2 /
NVL(
NULLTranslate still confuses me :-(

How to make page wider

Does anybody know how to also change the picture in the header when you change the page width?
I can manage to widen the page and the background picture on the page. But I can not figure out how to make the picture in the header as wide as the page.

The themes that I've found to be the most user modifiable are Black, White, Formal, Modern and Modern Frame. They don't use image files that limit the size of the page. I will select the one of those 4 based on the color of the navbar text so it is most visible with the design of the site.
OT

How to make Hierarchy view fixed in marketing plan .

Hi Gurus,
I have a requirement to make the Hierarchy view as fixed ie To remove the toggel functionality .
Component MPL_MAIN .
for which
I removed the toggel button and make the view visible all the times .
I have removed the button by commenting the code .
but I am not sure how can I make the view always visible ?
I can understand that i have to use the same code as the toggel event 'ONTOGGLEHIERARCHY'is using ,
but where should I be putting that code so that it takes the Hierarchy view at the time of initial loading .
Thanks ,
Naval Bhatt.

Hi Naval,
you can try putting this into the "DO_PREPARE_OUTPUT" Method of the Overview-View.
Regards
Dennis

How to make Pages default app for .doc files

How do you make Pages/Numbers the default app for all .doc/.xls files?

Welcome to Apple Discussions
Highlight a known Word document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose Pages. If Pages is not a choice, choose "Other" & navigate to the Pages application. Now click the "Change" button under the text that asks if you want to open all documents like this with Pages. Repeat with Excel documents & Numbers.
Be aware that the icons for these documents will be plain white icons.

How to make materialized view fast refresh parallel

We have Oracle 11.2.0.1 on Redhat 5.2. We use a dozen of fast refresh materialized views in our application.
From time to time MV refresh takes longer time than the refresh interval.
One of way to improve performance of MV refresh is to make the refresh parallel, e.g. http://www.dba-oracle.com/t_materialized_views_refreshing_performance.htm
- Use parallel DML - Oracle author Michael Armstrong Smith notes "I've done parallel materialized view refreshing
on tables recently and improved the load times considerably. Rather than having one load which took 2 hours,
I run 4 parallel loads, one for each partition. The length of time for the whole process is now determined by
how long the biggest partition takes to load. In my case, this is 40 minutes, with two 30 minute loads and one
20 minute load. Overall I am saving 1 hour 20 minutes. I can now add further partitions and do the same thing.
My only limitation is the parallel loads because I don't have unlimited processing power.
{code} My master tables are not partitioned, but think parallel will still better than non-parallel.
Now the question, how to make refresh parallel. According to the paragraph cited above, Use parallel DML appears doing the job. Can someone confirm that.
We use {code}
alter materialied view MV_OFFENSE parallel REFRESH FAST start with sysdate next sysdate+ 1/24;
{code}to schedule refresh. Does the parallel clause here parallels query the MV or refresh the MV?
Any other way to make MV refresh parallel?
Thanks

Doc http://download.oracle.com/docs/cd/E11882_01/server.112/e16579/refresh.htm#i1006319 says:
>
In a data warehousing environment, assuming that the materialized view has a parallel clause, the following sequence of steps is recommended:
1.
Bulk load into the fact table
2.
Enable parallel DML
3.
An ALTER SESSION ENABLE PARALLEL DML statement
4.
Refresh the materialized view

How to make Page View Mode user dependent?

Similar Messages

Maybe you are looking for