How to make panel shown in all desktops razor-qt

I'm using razor-qt right now and I think it's worth to look closer at it. but currently I'm exepriencing problem with panel- why does it not show in every virtual desktop except first one? how to change it?

Razor-qt is quite new and I think you would have better luck asking here. http://groups.google.com/group/razor-qt?pli=1. Anyway, I think you have to create a new panel for each virtual desktop/workspace you have.

Similar Messages

How to make Stickies appear across all desktops on rMBP

Hello,
I have a rMBP running Yosemite. I utilize three desktops and want to know if the stickie notes I create can be applied to all desktops. I want to create on one desktop and if I swipe to another desktop I want it to appear there as well without having to create duplicate stickies.
thanks

Hi Mike, Might have a look at the bottom of this page for Dock-It 2.6.1 for Mac OS X 10.5.x and earlier...
http://www.macupdate.com/info.php/id/8288/dock-it
As far as the other problems, I'd try Mirroring #1 & #3.
Move Off-Screen Windows to the Main Screen...
http://zach.in.tu-clausthal.de/software/
http://www.macosxhints.com/article.php?story=2007102012424539
http://www.jonathanlaliberte.com/2007/10/19/move-all-windows-to-your-main-screen /

How to make programs available to all users

How to make programs available to all users

By default, all Applications are installed in /Applications. Those are available to all users. If you choose to install in your home Applications folder, they are only available to that user.
You can also control app usage with Parental Controls. If that is on, that my be why some cannot use certain apps.

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Loop in smartform - how to make values valid in all pages

Hi All.
I have a smartforms with several pages (9). I must print these 9 pages once for each line in the internal table ITAB. When I put a loop in the first page, the data under that loop is printed correctly, but every text node outside the loop always prints the last line of ITAB.
Do any of you know how to make the data in the loop valid throughout the other pages?
any help will be welcome.
thanks,
Hermes.

I got it. The main window must be the first one in the first page. The loop must be inside the main window, and bellow the loop there must be a page-break command.

How to make bookmarks appear in all user accounts w/out importing and exporting everytime.

Hello, all. I'm imaging a couple of laptops to be sent out. I want the bookmarks on the admin user account to be applied to the network domain user accounts or roaming profile is you will. Is there a way to this without have to import/export?

I am trying to do the same thing. I also cant get it to work. I am
thinking it may have something to do with the concept of ScopedResponse, but
I am not sure. There is very little documentation and more importantly
examples of how to make sense of the getOuterResponse() method. Dev2Dev and
Google are of no help.
Anyone care to explain this to us?
Michael.
"Zhenhao Qi" <[email protected]> wrote in message
news:3fd4f634$[email protected]..
>
Hi All,
I have a jsp page to display a table. I want to add a "excel download"button
in this page, once user click this button, it will invoke the microsoftexcel
and all table content will appear in the excel spreadsheet.
I tried to set the content: <%@ pagecontentType="application/vnd.ms-excel"%>
the rest code as following. However, it won't work for me. Does anyone hasany
experience in doing this?
<%@ page contentType="application/vnd.ms-excel"%>
<%@ taglib uri="netui-tags-databinding.tld" prefix="netui-data"%>
<%@ taglib uri="netui-tags-html.tld" prefix="netui"%>
<%@ taglib uri="netui-tags-template.tld" prefix="netui-template"%>
<netui:html>
<head>
<title>
Web Application Page
</title>
</head>
<body>
<table border="1">
<tr style="background-color:#3366ff;font-family:arial;">
<td>Structure</td>
<td>Compound</td>
<% // Get the Items from the request stream
Vector mr_names = (Vector) request.getAttribute("method_result_names");
for (int f=0;f<mr_names.size();f++) {
out.println("<td>" + mr_names.get(f) + "</td> ");
Vector mrs = (Vector)request.getAttribute("method_results");
for (int g=0; g<mrs.size(); g++)
out.println("</tr><tr>");
Vector row1 = (Vector)mrs.get(g);
for (int f=0;f<mr_names.size()+1;f++) {
String s = (String)row1.get(f);
if (f==0) {
%>
<td><embed src="structure.jsp?Sample_code=<%=s%>"width="120" height="100"></embed></td>
>
<%
out.println("<td>" + s + "</td> ");
out.println("</tr>");
%>
</table>
</body>
</netui:html>
Thanks!
Zhenhao

How to make feedback visible to all user having read permission

hi,
for a document , a user is giving a feedback. my need is how to make that feedback visible to all user. all user are having read permission only.
help will be appriciated
Regards,
Shanthakumar.

Hi,
Normally we use feedback as an explanation by an approver to the previous approver about his action on the doc( reject/approve).
I think you want ur users to view the doc and then give suggestions to make it better and these comments should be approved and then made visible.
I replied on one such thread earlier too.
Please have a look at this [thread|https://www.sdn.sap.com/irj/sdn/thread?threadID=816692]
I hope it helps.
Regards,
Sumit

I just got logic and need help i dont know how to make a track at all

i just got logic and need help i dont know how to make a track at all

Pancenter wrote:
There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.
Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
pancenter-
Hey Pancenter there are still lots of us about.
I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

How to make weather shown in the notification bar

I'm running IOS5 on ipad2.
Can weather be shown in the notification bar ?
If yes, how do I do it?

Jakosaur wrote:
Go to Settings>Notifications>Weather Widget and turn it on.
From the Terms of Use:
Test your answer. When possible, make sure your Submission works on your own computer before you post it.

How to make finder to open all windows in one?

Hi,
As you all know, in the Finder, if you open any folder, it opens that folder in a new finder window. I'm very tidy and have many files in many others in many others in many others,,, at the end of the day, I'm stuck with like 10 finder windows to close one by one. I wanted to know how I could set my finder to open everything in the same window, please advise.
Thank you so much in advance.

You can also use the Option key productively.
While in Finder...
If you hold the Option key down while clicking the Close button for a Finder window (such as a folder's window), all Finder windows will be closed. This works within most programs, too.
If you hold down the Option key while opening a folder that's nested inside another folder, the enclosing folder will be closed as the one clicked on is opened. This is a handy way to keep things neat as you step down into a hierarchical nest of folders.
If you are in Program A and hold down the Option key while clicking in a window for Program B, you will switch to Program B and all windows for Program A will be hidden. This works with Finder, too, whether Finder is Program A or Program B in that sequence.
If you hold down Option-Command while clicking in the window of another program, all windows for all other running programs will be closed. Exception - although this will also close Finder windows, it won't blank the Desktop.

How to make dock appear in all monitors, and keep new windows to same monit

I've got an unusual setup: two screens at my desk, and another one in front of a recliner nearby so that it is not physically adjacent to the other two. This means that when the cursor moves off the side of two of the monitors and goes to the third one, I can't see it. I don't want to mirror all the displays because half the time I use the two adjacent ones from the desk, and sometimes I just want to use the one separate one. Can someone tell me if it's possible to
1) make the same dock appear in all monitors? I want access to the dock no matter which monitor I'm looking at. Is there a utility or hack that will give me a dock in each screen?
2) any way to have apps open and create new windows in whatever monitor I'm currently working? it's very annoying that sometimes I run a app and it throws up a window in the monitor I'm not looking at. Any way to keep it to the set of two or to the 3rd one, depending on which I'm using at the time?
thank you!
Mike

Hi Mike, Might have a look at the bottom of this page for Dock-It 2.6.1 for Mac OS X 10.5.x and earlier...
http://www.macupdate.com/info.php/id/8288/dock-it
As far as the other problems, I'd try Mirroring #1 & #3.
Move Off-Screen Windows to the Main Screen...
http://zach.in.tu-clausthal.de/software/
http://www.macosxhints.com/article.php?story=2007102012424539
http://www.jonathanlaliberte.com/2007/10/19/move-all-windows-to-your-main-screen /

How to make panel collection with auto height in a ADF page

Hi,
I developed a page in ADF of version JDev 11.1.1.4.0 where I had a adf table under adf panel collection. Now I want to change the height based on my screen resolution.
For width I used the styleClass as "AFStretchWidth" but couldnt find any option for auto height for table due to this I can see vertical scroll bar on my page which I want to avoid.
Even I tired to create a customized styleClass as shown below but its fixed height but not dynamic
IN CSS FILE :
.lookUpPagePannelCollection{
width:98.5% !important;;
margin-left:5px;
margin-left:5px;
height: 15.5em !important;
I want to use % in height attribute which is not supporting by panel collection, can anyone tell the alternative way or tell me which version of JDev had this option.
Thanks in advance.

Hi,
Set <af:panelCollection> as a child component of <af:panelStretchLayout> and check output.
Form Tag Documentation
Geometry Management
This component can be stretched by a parent layout component that stretches its children. e.g., another panelStretchLayout, panelSplitter.
This component uses <f:facet name="top">, <f:facet name="bottom">, <f:facet name="start">, <f:facet name="end">, and <f:facet name="center"> to organize content into each stretched panel. The contents of the facet may be stretched except when the height or width of the facet is set to "auto" via the topHeight, bottomHeight, startWidth, or endWidth attributes which would then cause that facet content to use its natural browser height or width. Examples of child components that can be stretched inside of the panelStretchLayout facets include:
<af:decorativeBox>
<af:panelAccordion>
<af:panelBox>
<af:panelCollection>
<af:panelGroupLayout layout="scroll">
<af:panelGroupLayout layout="vertical">
<af:panelHeader>
<af:panelSplitter>
<af:panelStretchLayout>
<af:panelTabbed>
<af:region>
<af:table>
<af:tree>
<af:treeTable>
See
http://docs.oracle.com/cd/E14571_01/apirefs.1111/e12419/tagdoc/af_panelStretchLayout.html

How to make the times of all nodes similar

Hi,
i have a 3 node 10.2.0.4 64Bit Cluster database on
HP Itanium with OS RHEL-4.6.
we donot have any NTP Server integrated with these.
Three nodes are running with three different Time with significant differences.
More over 2 of the Nodes run well ahead of real Actual time and One run behind actual time.
For Example at 11:34 AM the nodes return their times as follows::
HOST_NAME DATETIME
Node-1 11-JUL-2012 11:56:38
HOST_NAME DATETIME
Node-1 11-JUL-2012 11:18:12
HOST_NAME DATETIME
Node-3 11-JUL-2012 11:44:26
the real time difference is 16 Min Minus and 22 Min Plus.
And difference of Times does have an adverse business impact.
if syncronization without NTP is possible -- that would be great.
if not, how can we bring all the server nodes close to the real time.
Your suggestion and workaround will be appreciated to synchronize the times of three instances
as much possible with out hampering the Cluster Services.

onedbguru wrote:
I forget the name of it, but there is an executable that is used in Exadata clusters to do the same thing. Two standerd bash scripts I deploy to all RAC servers are called rac (for running a "RAC command" on all nodes) and raccp (for distributing a local file to all other RAC servers).
Uses ssh and scp and are quite useful. Want to see uptime for example? rac uptime. Want to distribute the updated ntp config? raccp /etc/ntp.conf.
Sadly though - no Exadata. There are 2 Exadata DB Machines in the corporate, but despite having one of the busiest databases on a self-build 12 node 3-yer old RAC, crunching data 24x7 for our corporate clients, no Exadata for us... Kind of like this Dilbert situation - total incompetence and requesting many millions are required.

How to make object appear in all slides?

I'd like to place a logo in the top right of a slide and have it appear in all slides. If I adjust the logo in one slide, it will adjust the same in all slides.
Any ideas how to accomplish that?

Place the logo on the master slide being used in the presentation: View > Show Masters Sides

How to make a installation file in desktop application??

hello everybody,
Actually i want to make a installation file for a desktop application.I know there are some thirdparty software vendors who are providing that. Let me know if any other tool is there in java to make a installation file for any desktop application.
Thanx in advance

well im not sure if there is an application but i do know you can use .bat files to open applications if your not sure what a .bat file is just msg back and ill explain and ill also do a example if you want so just ask ok soon ill rellase a link to my web-page so you can ask me stuff there soon and you can anwser other peoples questions

How to make panel shown in all desktops razor-qt

Similar Messages

Maybe you are looking for