How to make personas look a lot bigger.

Firefox 4 basically cuts the persona in half and you can't see it. I liked fire fox 4 i just want to see the full persona again not one quarter of it.

check these out -
http://www.cgm-online.com/eiperle/cgmaged_film_lee.html
http://www.nattress.com/Products/filmeffects/filmeffects.htm

Similar Messages

I subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music

i subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music - i think it keeps trying to find on the external harddrive where i used to keep my music

Of course iTunes is looking for the music on the external HDD. Enabling iTunes Match does not magically change the location of the iTunes library to the cloud.
To play the music either plug the external HDD back into your computer or create a new, empty library to use for streaming the iTM content. The latter can be accomplished by holding down the Option key when launching iTunes, choosing "create library" then enabling iTunes Match on the new library. DO NOT have iTunes scan your HDD for music.

How to make website look correct in Safari, Firefox, and Chrome?

Hello there. I'm working on a website which was inherited to me by someone who died. So I am left with all of his coding which is about 4 years old. Now I'm working on positioning of the website and i've found that the only browser the website looks like it's supposed to is Safari and I can't for the life of me figure out how to make it look right in all the browsers and on a phone or tablet. It might be easier if I started from scratch but unfortunately I don't get that luxury. Please help me.
Here's a link...MuseumOfNaturalistory.com

I dont understand what some of these errors are asking of me. For instance, this one...
if (xmlhttp.readyState==4 && xmlhttp.status==200)
✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
That's the way the code has to be in order to function. What does it want from me?
And then here....
Line 71, Column 5: an attribute value must be a literal unless it contains only name characters </div>✉You have used a character that is not considered a "name character" in an attribute value. Which characters are considered "name characters" varies between the different document types, but a good rule of thumb is that unless the value contains only lower or upper case letters in the range a-z you must put quotation marks around the value. In fact, unless you have extreme file size requirements it is a very very good idea to always put quote marks around your attribute values. It is never wrong to do so, and very often it is absolutely necessary.
Line 71, Column 5: character "<" is not allowed in the value of attribute "id" </div>✉It is possible that you violated the naming convention for this attribute. For example, id and name attributes must begin with a letter, not a digit.
I have absolutely no clue what it is asking of me. Doesn't it have to be that way? Also why when I go to "Line 71" that isn't where this actual code is? Is there some special way to decipher this?

How to make HD look like 4K

I found this article rather interesting. If I had to try and make a silk purse out of a sow's ear, I would read this one again.
RedShark News - How to make HD look like 4K

I'd forgotten about RedShark in general ... thanks for the heads-up.
And the point about the "impression" being at times more important than the reality (especially if not well handled) is well taken. Working professional stills for many years now ... I've had large prints that even at close inspection looked much cleaner, sharper, and less noisy than other photog's made who had "larger" sensors ... but did their post not as righteously as I did. How you set up & shoot the image/s in the first place matters ... as does how you handle your post & output.
Craft matters ...

HT201436 how to make personal ringtone for each contact

how to make personal ringtone for contacts

You create the ringtone - Google will find several ways to do this.
Then sync them to your iphone.
Then go to the contact and select the ringtone you want

How to make it look like the actors are watching TV

Hi,
I am looking to add an effect in Adobe Premiere Pro CC to make it look like the actors are watching TV in the dark. Just a soft pulsating, bluish-white light that may vary throughout. Does anyone know how to do this? I've tried scouring the internet but haven't found much. I'm a beginner for sure, but trying to learn!
Thanks so much,
-Andy

In the effects panel type "light" in the search box. This will bring up all the lighting effects in Pr. Adjusr/Lighting or Stylize/Strobe might work for you. There are a lot of adjustments you can key in until you find what suits your needs.

Bridge: How to make PDF looking like this:

I try to arrange my images in PDF document, which I'm making in Adobe Bridge CS5.
I want to make this looking something like this:
How to make it?

Or get a decent program like Contact Sheet X.
http://csx.riaforge.org/

How to make a look & feel

I want make a look and feel like available in the pic. In the Below Link
http://ddsuresh.150m.com/controls.jpg
Anybody can give a idea.

I went through that website. But still i did not the look and feel what I need.
http://ddsuresh.150m.com/index.html
Once again visit the above website and give ur ideas. How to make look and feel.

How to make it look like the camera is following a zig zagging line

I have an animated video where a person clicks a button and an arrow appears coming out of the right side of the computer. I would like to make it look like the camera follows the arrow as it zooms along a zig zag path and eventually ends at another computer. Does anyone know of any good tutorials for this?
Thanks,
Paul

This is just a matter of keyframes for camera position and point of interest.You are probably not going to find a tutorial that exactly matches your project. Try this:
Open up 2 views, one active camera, one top view.
Set a position keyframe for the camera where you want the movement to start.
Drag the point of interest to point at your subject (animated arrow)
Using the top view and setting the CTI (current time indicator) to the end point of the camera move, move the camera's point of interest to the same position as the animated arrow
Still in the top view, move the camera to it's final position
Using the pen tool (keyboard shortcut g) add points to the camera position path and drag them into a zig zag shape using the top view
Selecting the Point of interest in the timeline, adjust the position of the point of interest to follow the arrow as it animates across the screen by moving the CTI and setting new positions.
Another thing you could do would be just to use a lookAt expression for point of interest. This would keep the camera pointed at the arrow.
Hope this helps. Animating a camera is one of the most basic skills an AE artist should have. It takes a bit of practice but it's not hard.

How to make personal Hotspot at iPhone 4

Ive installed 4.3 & can' find where and how to establish Personal Hotspot.... Does anyone could help????
Thanks ahead!

FiveLittleFish wrote:
Is your phone on a tethering plan? If not, the option won't appear.
I'm not on the tethering plan and I've got the "Set Up Personal Hotspot" option under my network setting. I haven't pressed it it see if would actually let me do it, but the option is there. The phone isn't jailbroken and has never had anything but the factory software on it.
Prior to the hotspot, I had the set up tethering option too. From what I've heard, though, everyone had the option, but it wouldn't actually work unless you had the tethering turned on by AT&T.
Edit: I pressed the button to set up the hotspot and it brings up a popup window that says you have to contact AT&T to activate the feature.
Message was edited by: Dave Williams

How to make it look like you never bought a movie.

Ok....so....I accidentally bought a really inappropriate movie on iTunes and REALLY need to make it look like I never bought it.........like TOTALLY delete it from my purchase history...I don't care about the money, its just I don't want the movie to be in the cloud anymore! PLEASE HELP! I am freaking out!!!! I want to make it look like I never bough the movie ever! SURELY there is a way to do this.....THANKS!

Make a new account and use that, you will lose your entire history and will need to authorize the new account to play things from the old.
Drastic, but I know of no other way.

How to make colors looks same in Lightroom and Photoshop?

The colors of JPGs with sRGB colorspace are displayed differently between Lightroom and Photoshop and other image view applications.
I edited RAW images in Lightroom and export them to JPG files with sRGB colorspace, but their colors are eventually different from what I saw in LR.
(I set ProPhoto as the colorspace for my Photoshop.)
Is there anything I can do to solve this problem? Or maybe to reduce the color difference?
What is the best I can do to manage colors for those images that I want to share on the internet?
Thank you !!!

If colours look different between two colour managed applications such as LR and PS then you have either not calibrated your monitor at all or are using a corrupt monitor profile.
If the former you require a calibration device, such as a Spyder (lots of other around). If the second then re calibrate.
In the meantime you can set your monitor to use a colour space such as sRGB as a profile. This is not a solution, it is a temporary fix. Using a colour space as a monitor profile is not colour management, but will at least make the colour appear the same on your monitor.
There are some useful links concerning colour management and LR here you may wish to read.

Advice on how to make this look up?

Hello everyone.
I was wondering if anyone can give me advice on how to do this to make it the last complex.
I thought up some complex solutions that will work but seem messy in some ways.
I need to create a look up, I'm parsing a file and transforming it based on its field name and field value. If a certain field name and field value is found, I need to create specific subfields. An example is:
say I read in a file and I come across
A class named interface
with a data field DisplayStatus and field type: INTEGER INIT(132)
DisplayStatus INTEGER INIT(132)
Then I need to create a file that looks like this:
DisplayStatus INTEGER INIT(132);
OP 'interface'.'DisplayStatus'
HAS_SUBFIELD NOTIFY;
OP 'interface'.'DisplayStatus'
HAS_SUBFIELD TIMESTAMP;
OP 'interface'.'DisplayStatus'
HAS_SUBFIELD CHANGE;
OP 'interface'..'DisplayStatus'.CHANGE
SUBFIELD_HAS_VALUE (METHODSPEC) (DUIFCRDC) ;
OP 'interface'.'DisplayStatus'
On the other hand, if I run across a field name:
CommandIndicator CHARVAR;
Then I need to create the following in a file:
CommandIndicator CHARVAR;
OP 'interface'.'CommandIndicator'
HAS_SUBFIELD NOTIFY;
So you can see, based on a specific field name, and data type, they have unique data types.
My solution was going to store a text file that contained all the field names, data types and subfields, and just create a map, so based on the field name, it will look up the value which wil be the subfields, but you can see the sub fields can either be 1 line long, or it can be multiple lines long, thats where I'm running into issues.
What type of data structure would I use? a Map<String, List<String>> ? or is that making it more complicated than it ahs to be?

To make sure I understood you correctly:
You have a file like
class classname
fieldname1 DATATYPE1 constraint
fieldname2 DATATYPE2 constraintyou want
OP 'classname'.'fieldname1'.some optional string
some line defined by DATATYPE1
...How would you store "some optional string" in a Map<String, List<String>>?
Do you just replace a special char sequence with 'interface'..'DisplayStatus'?
If so, why not just store the lines in one String including the line breaks, making the list dispensable?
Regarding XML:
I guess he meant that if you had both your source files in xml, you could do what you want via XSL transformation.
But you'll have to google for that yourself. It has been a while since I worked with that.

[SOLVED] How to make URxvt look like default XTerm?

I don't want to install terminus-font or something else. Just want to make XTerm and URxvt look equal.
I prefer URxvt over XTerm for its performance, but default URxvt looks ugly comparing to default XTerm: for example default bitmap font (fixed) is broken whereas it looks beatiful on XTerm.
Also colors in URxvt do not match to those in console and XTerm (which seem to be the same) - highlighted directories, executables, prompt, etc which seem to be darker.
How do I fix it?
Help is appreciated, as always.
Thanks.
Last edited by eruditorum (2012-12-07 09:35:23)

I believe the default xterm fonts are listed in /usr/share/X11/app-defaults/XTerm. I may be wrong but I think you want to specify the urxvt font as:
-misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1
This will be incorrect if you do not have the xorg-fonts-75dpi package installed. If you don't have that package installed, I'm not sure what font is used in its place by either emulator.
WIthout specifying the terminal colors in my ~/.Xdefaults or ~/.Xresources file, I also found the two terminals' colors do not appear the same. I have configured the colors so they are identical in both apps. This excerpt from my .Xdefaults uses the asterisk, *, as a wild card so the colors I have chosen apply to both terminals.
! Colors
*foreground: rgb:b2/b2/b2
*background: rgb:08/08/08
! 0 black, 1 red, 2 green, 3 yellow, 4 blue, 5 magenta, 6 cyan, 7 white
! 8 black, 9 red, 10 green, 11 yellow, 12 blue, 13 magenta, 14 cyan, 15 white
*color0: rgb:28/28/28
*color1: rgb:ba/44/44
*color2: rgb:50/94/43
*color3: rgb:cd/a8/38
*color4: rgb:52/76/a8
*color5: rgb:c0/52/88
*color6: rgb:44/ba/ae
*color7: rgb:b2/b2/b2
*color8: rgb:58/58/58
*color9: rgb:ff/9d/80
*color10: rgb:84/bd/79
*color11: rgb:ff/e6/98
*color12: rgb:82/a4/d3
*color13: rgb:c6/84/a5
*color14: rgb:a7/d8/d4
*color15: rgb:e4/e4/e4

DVI to HMDI - how to make it look better?

I am hooking up my MBP to a Sony 46" Bravia Z LCD through the HMDI connection -
how can you make the external LCD look a little bit better? Seems the MBP picks up the signal and recognizes the Sony screen - but the colors don't look like my MBP screen - you know what I mean?
I suppose this is as good as it gets? Is this how it always looks when connected to a normal TV LCD?
Thanks

Yeah I understand the bit about the ratios, that's not a problem, I am able to tweak it to whatever I want it to fit onto the 16x9 screen -
it's the way it "looks" on the TV compared to what it looks like on my MBP. I'm assuming it's as good it gets on the TV since it is a "TV" and thus is not going to look exactly the same as my MBP, as the TV has its own set of colors and such?
Thanks

How to make personas look a lot bigger.

Similar Messages

Maybe you are looking for