How to make phone ring tone louder for HP Officejet J3508 All-In-One

Hi, I've bought HP Officejet J3508 All-In-One.. I've found a topic that match with my problem here. And it seems no one answering it.. the question was posted on 13 October 2010, So I can assume that even HP don't have the solution for this issue? I hope someone could answer it.. I've checked the manual, mostly it only talk about fax, print and scan...
Thank you.

Hi mektifan,
Welcome to the HP Forums!
I see that you are unable to scan over the network with your HP Officejet 7313 on Windows 8.1. I am happy to help you with this scanning issue!
Please try the following:
Go through this How To Scan guide. How to Scan: Windows 8.
Run the HP Print and Scan Doctor, to fix any problems you may have.
Hope this helps you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Is there additional ring tones? or How to make custom ring tones?

    Hi,
    I am thinking about adding additional ring tones.
    Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
    or
    Can I make custom ring tones by myself?
    If there is an application to do the ring tones, pls anyone let me know?
    thanks

    Hi San,
    Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
    Here we go :)
    PCM File Requirements for Custom Ring Types
    The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
    •Raw PCM (no header)
    •8000 samples per second
    •8 bits per sample
    •uLaw compression
    •Maximum ring size-16080 samples
    •Minimum ring size-240 samples
    •Number of samples in the ring is evenly divisible by 240.
    •Ring starts and ends at the zero crossing.
    •To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
    Configuring a Custom Phone Ring
    To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
    Procedure
    Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
    Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
    Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
    Step 4 Save your modifications and close the Ringlist.xml file.
    Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
    There is a nice little Step by Step here;
    http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
    Or search sites like this one;
    http://www.adman.net/cisco/ringtones/browse.asp
    Hope this helps!
    Rob
    PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

  • Need driver (*.inf) files for HP OfficeJet 5610 All-in-one

    I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?

    Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
    PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
    And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
    It will save you hours instead of mounting AIO images and whatever.
    Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish.

  • Scanner set up for HP Officejet J4680 All-In-One

    I'm trying to set up to scan from the HP OfficejetJ4680  All-In-one. I do not know what software I need to download to my Acer laptop to get the scan function to work on the HP Officejet

    Hi Susieque,
    The best option, if it's available for your Operating System (Windows 7, etc.), is to download and install the Full Feature Software for your printer.   The FFS includes the scanning option.
    Here are the instructions:
    =========================================================================
     In many cases, you can (re)install the Full Feature Software for your printer to enhance its capabilities.  The HP Solution Center is an integrated part of the FFS.
    (Re)install the basic driver or Full Feature Software:
    Drivers control hardware connected to the computer (wired or wireless).
    Software controls the programs that interact with the User.
    Go to the top of the forum page to Support and Drivers
    Enter your Printer Model information, and then go to Software and Drivers...
    Enter your Operating System in the Drop-down menu...  Scroll down
    Look for category Driver - Product Installation Software
    Select the appropriate Basic Driver or Full Feature Software – if available for your printer Save the *.exe installation package on your computer -
    NOTE the name and the location - the *.exe file will likely save to "Downloads “Install the Software / Driver installation package:  It will be named *.exe – the package will most likely be located in the Downloads folder.  If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
    NOTE:  There is sometimes a lot of information at the printer’s website: manuals, how-to pages, and alerts for your printer.  Be sure to take an extended look at what’s available.
    ==========================================================================
    I hope this helps!
    Say “Thanks!” for the Help by clicking the Kudos Star to show your appreciation.
    Fixed?  Mark this Post “Accept as Solution” to help others find the answers.
    Note: You can find “Accept as Solution” only on threads started by you.
     2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Wireless setup problem for HP Officejet J6480 All - in - One printer

    I can not get my printer setup wirelessly.  When I send a print job to it, the message comes back, printer offline. 
    I can hook up the USB cable and it prints fine.  I installed the software on my IMac as instructed.  I used the HP Printer manager.  My IMac is setup with the airport and I have a wireless router.
    Through the setup button on the printer I printed off the "wireless network test report" and  the "HP network configuration" page.  They show no errors.
    Can anyone help me out? 
    I need to be able to wirelessly print from my IMac, a Gateway desktop, a Dell laptop and a Toshiba laptop. 

    connecting Wireless to HP j6480 printer
    Problem is when I go to menu and press wireless network printer option. It’s just press menu then use the arrow keys on each side of the OK button. Then press down to Wireless Network Wizard. Press the OK button. I think the Wireless Network Wizard is the third option down when you are in the Wizard. It will then ask you for the wep for your router. I have the Verizon Jet pack from Verizon. But I assume you could use any router. My router wep was all numbers for example 99000627xxxxx all numbers. I tried and tried and kept putting in the wep but it kept coming back wrong wep code. What I did not watch was the numbers I was putting in were wrong. For example when I was putting in 990000627XXXXX that was not being put in. What was being put in was something like ypt$&^ etc. I did not know when you were putting in the numbers you had to keep pushing on the 9 key until a nine came up, then it would go to the next number you had to put in. You had to do the same for the second, third, fourth and etc until you entered all of the code. Then the wireless router connected. Why does someone not tell you that.

  • Need generic print driver for Officejet 7210 all-in-one on Windows 8.1

    Updated my Windows 8 to Windows 8.1, which removed my print driver for an Officejet 7210 all-in-one.  Attempted to reinstall.  Error that file not found.  Followed detailed process to a tee (deleted temp files, removed startup programs, everything).  Driver doesn't work but printer does with other computers.  Printer is no longer supported and no help (but is in great working condition).
    I'm looking for a generic driver that would work with my printer and Windows 8.1.  I really appreciate any help...
    This question was solved.
    View Solution.

    Hi LChristofaro,
    I have researched your error message and the Msiexec.exe error and it is an issue with windows installer. I recommend restarting your windows installer.
    To do this:
    1. Run "Services.msc" (without the quotation marks).
    2. Double-click "Windows Installer" in the Services list.
    3. Click Stop and click OK.
    4. Click Start and click OK.
    Restart you computer and try the install again.
    Let me know if this helped.
    Thank you,
    I worked on behalf of HP.

  • How do i purchase ring tones or ringback tones for my phone

    how do I purchase ring tones and ring back tones for my phone
    how do I designate specific tones for specific people

    You use a free app like Zedge for the ringtones or use an app like Ringtone Maker, both in Google Play Store and free or similar to snip the desired parts from songs on your phone from your own collection.  To assign to a contact, go to the address book and tap the contact, tap EDIT, and scroll down to assign a ringtone.  As far as ringbacks go....you have to buy those from Verizon either through the My Verizon app or from your My Verizon account page online.  Notice:  most people hate to hear other people's ringback tones plus, the volume is always too loud and the quality is horrible.

  • How do  I make a ring tone for iphone 4

    How how do  I make a ring tone from my original music , all I read is old  , surely I can convert something to a ringtone  for my iphone 4.
    Just seems like I cant do anything without buying something from Apple ... need some help , iM geetting tired of missing calls because of some naf ringtone.
    thanks if you can help .

    go to app store  get free ring tone converter, play your song must be an Mp3 or mp4... convert
    sync phone with computer  in itunes , turn sync on ... it should come across ..select on phone  in settings , sounds ringtones, its on the top line , play with click and voi la...   ..sorry ..just dissapointed that apple only had old discussions there  noone  really helped there ... cheers

  • How can i redownload rings tones without paying for them again?

    How can i redownload rings tones without paying for them again?

    Most, but not all, content on the US iTunes Store is available to download again through iTunes in the Cloud (a couple notable exceptions seem to be TV Shows that don't have "seasons", such as The Daily Show, Colbert Report, etc.). For more information about downloading past purchases you should take a look at http://support.apple.com/kb/HT2519

  • How can I add ring tones to my iPhone?

    How can I add ring tones to my iPhone? I just got an iPhone 5c and I am clueless about these things.

    There are old posts that reference this but if you Google "How to make ringtones for iPhone" you'll find some detailed instructions on how to create and convert songs into ringtones. Your other option would be to buy ringtones from the iTunes store but it's really easy to make them yourself out of songs you already have

  • Why when I go to garageband and make a ring tone then try to sync it, It says all existing songs, movies and tv shows will be removed?

    Why when I go to garageband and make a ring tone then try to sync it, It says all existing songs, movies and tv shows will be removed?

    Oh ok. As far as music, no i have not synced music because it would load so much. I don't have movies or tv. I have never loaded ringtones before. So i am guessing they are connected to music. My apps do sync. So the best thing is to not sync and just drop them on my devices icon???
    oh, if I check sync music the button for entire music library is selected how do I get Selected playlist, artists, ect. selected. Right now everthing is grayed out.

  • Just bought iTunes song and can't make a ring tone..??..

    I just bought a .99 cent iTunes song and when I right click on the song in iTunes it tells me that "This song cannot be made into a ringtone" "This ensemble can no longer be made into a ringtone"
    Anyone know or had this problem before? I only bought this song for a ringtone and now I can't use it.

    You can make a ring-tone using Garageband out of your own music library. It's very simple. See the link I posted. Of course you need to have Garageband to do this.
    http://support.apple.com/kb/HT1358

  • ITunes 7.4.1 (2)...Not showing and Ring Tone Icons for An Songs...

    I have recently upgraded to the newest version of iTunes. However, of the 1,000+ songs I have,
    the ring tone icon is not showing up at all to create any ring tones for my iPhone. If you have any suggestions please let me know.
    Thanks!

    So after my last response, I have now managed to get the Ring tone identifier bar showing possible ring tone songs to show up in iTunes. However, none of my 1,000 + songs have an icon to allow me to make a ring tone.
    Any ideas...

  • How do you delete ring tones?

    I've created ringtones with the Ringtones app. I have about thirty I put in iTunes. all was fine. For the last few months, I tried creating a couple of new tones but when syncing them, iTnuews won't do it and now it tells me some can't be found. I want to delete all tones and start fresh. But I don't know how to delete the ring tones that are currently there. How do I delete ringtones?

    Hello Top Taciturn,
    The following article details the process of deleting items from your iTunes Library.
    iTunes 11 for Windows: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH12359
    Cheers,
    Allen

  • Nokia 5610 - how to make calls ring only on headph...

    Nokia 5610 - how to make calls ring only on headphone and not on phone???
    Could someone help me out please??? I tried everything... Nothing works!!!

    Surely if you put the phone on silent and connect the headphone? That works on mine.
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

Maybe you are looking for

  • Pricing For Text Item in Sales Order

    Hi , How to give price for text item in sales order. With regards. Afzal

  • Play internal movie clip at target

    This seems fairly simple, but i can't get it to work. I want to play a movieclip from the library when a button is clicked. But the LoadMovie is for SWF. The only way I can get it to work is have the button click cause - goto frame, which has the mov

  • Suggestion for not picking up the same record

    Hi All, I have a plsql procedure that picks up the records from the same table from multiple threads. Different threads should not pick up the same record. Current Logic: I am locking the row that has been picked up the current thread and the next th

  • Bug or I don't know how to use the software?

    I am using shared variables to summarize data to a main report for orders (in the main report) and credit notes (in the subreport) to the main report. I then have a formula that restates the sum of my orders per salesperson, done so that I can use th

  • Using JMX for detecting changes in windows file system?

    Can anybody help to find way to watch changes in windows file system.........Or say files are transfer in mounted drive i want to start access to those files as and when they come in drive.....do not wait while transferring all files ..