How to make phone vibrate on ring, not messages?
Hi,
Im trying to set up my phone so that it only vibrates when an incoming call comes through, for all other things (messages, notifications etc) I want it to be on silent.
Can't seem to figure out how to set this up, any ideas?
Cheers
Andrew
Hello Daven02,
You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
You can find a variety of supported headsets at the Shop BlackBerry website.
Thanks and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
How to make phone vibrate when call is answered?
Hi!
Does anybody know how to make a BB phone (Bold 9700) to have a short vibrate when your call is being answered, so that you don't have to look at the phone or hold it to your ear when making a call?
Appreciate any advice, thks!Hello Daven02,
You might want to try using a bluetooth headset as there is no way to enable a vibration when a call is connected.
You can find a variety of supported headsets at the Shop BlackBerry website.
Thanks and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone
Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.
-
How to make phone phone vibrate through j2me code
how to make phone phone vibrate through j2me code
thanks in advanceSome like this
Display.getDisplay(this).vibrate(800); -
Hello
I have a problem related to synchronization.
When you synchronize ipad Section 3 "Other" takes as much memory up to 8 gigobayt.
How to make the section "Other" did not increase?
Thank you.DOCUMENTS AND DATA IS ALSO WHERE YOUR MAIL INFORMATION IS STORED SO IF YOU ARE A "HOARDER" IN EMAIL, GO INTO THE GMAIL, HOTMAIL, ICLOUD ETC WHATEVER YOU USE, AND DELETE YOUR TRASH, SENT, DRAFTS, ETC.
THAT SHOULD HELP A LOT. -
How to make google come up and not yahoo when i click anew tab
how to make google come up and not yahoo when i click a new tab
== This happened ==
Every time Firefox opened
== todayYou can use 1 of these add-ons
[https://addons.mozilla.org/en-us/firefox/addon/newtaburl/?src=search
NewTabURL ]
[https://addons.mozilla.org/en-us/firefox/addon/new-tab-homepage/?src=search New Tab Homepage]
with NewTabUrl you have more options
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
How to make selection parameter gray out, not changeble mode
Hi Experts,
Selection screen having parameters, I am putting default values in that parametrs.
How to make this parameter gray out, not changeable mode.
Thanks in advance
mahahe.
See comments below
Edited by: Rob Burbank on Jul 1, 2009 12:43 PMHi,
For the parameters required, while declaring them use the MODIF ID, lets say you have choosen the modif id as SC1.
i.e. parametes: p_mat type matnr DEFAULT '100' MODIF ID SC1.
Then in the initialization event, code as below.
LOOP AT SCREEN.
IF screen-group1 = 'SC1'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
It will work.
Regards,
Nangunoori. -
How to make oracle is case insentive ( not case sensitive)
SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
please help me to give the solution
How to make oracle is case insentive ( not case sensitive)
if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
I have solution for application level . it is working fine
Possible solutions:
1. You want to store data case insensitive: do an 'insert...
values(upper('Abcd'))...'.
This will put your data in upper case into the tables.
2. Your data will be mixed-case and you want to select them case
insensitive:
create 'function based indexes' on every column you want to use in
your where-clauses.
Then 'select ... where <column_name> = 'ABCD'.What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
HTH -- Mark D Powell -- -
SMTP-server does not support DKIM signature.
How to make a DKIM signature for outgoing messages in the Thunderbird?I'm not familiar with this particular use of the terminology.
Thunderbird has S/MIME support built in. You can add PGP support via the Enigmail add-on. Both offer the means to sign and encrypt messages.
I see add-ons to support the checking of DKIM-signed incoming messages, but haven't found any yet for signing.
Is it something that an email client is entitled to do? The Wikipædia entry says
<blockquote>Both modules, signing and verifying, are usually part of a mail transfer agent (MTA).</blockquote>
and that means a server, as opposed to a client (MUA). -
How to make add the program system.out messages to a applet text field?
How to make add the program system.out messages to a applet text field?
System.out.println("I wanna displany this message on a applet text field, thanks");You may wish to change the output destination to a JTextArea. Please have a look at this link that likely shows what you want:
[http://forums.sun.com/thread.jspa?forumID=54&threadID=640376|http://forums.sun.com/thread.jspa?forumID=54&threadID=640376]
If you need other examples, search the forum. I found the search terms -- redirect system out textarea -- very helpful.
Good luck -
HT5047 Have Apple Iphone 5C. The phone vibrates but will not ring. What do I do/
Have Iphone 5c. It vibrates, but will not ring. Phone shows that the sound is all the way up. Why will it not ring?
I had the the no sound issue also on my iPhone. I found this trick to solve the problem and it give back all sounds on any iPhone.
1- Go to Settings
2- General
3- Scroll down to : Accessibility
4- Select Assistive touch (for more information about Using AssistiveTouch on your iOS device : http://support.apple.com/kb/HT5587)
5- If the "White dot" doesn't appear - Click 3 times to the home bottom and you should get the "White dot" somewhere on your iPhone sceen (you can move the "White dot" where you want on the screen of the iPhone)
6- When you get the "White dot" - click on it
7- You will have 4 icons, click on the device icon
8- Click volume up (be sure the volume is at the maximum)
9- Click on the little bell (make sure the bell is not muted - I found, it's not very clear whic bell is on or wich bell is mute)
10- Call your iPhone - the problem of no sound should be fix (if the problem is not not fix be sure the volume is up and the bell is not muted - select the other bell by clicking on the bell - call again your iPhone - the problem should be solve and it should work)
11- If you do not like to keep the "White dot" on your iPhone screen - click 3 times to the home bottom and the "White dot" should disappear (if you want it back - click 3 times to the home bottom and the "White dot" should be back)
I found this trick at : http://www.iphonefaq.org/archives/972122 - My iPhone ring/silent switch is stuck on mute, how can I turn on sound? - On the comments of " hi iphone users i have had " Submitted by jodray (on February 5, 2013 - 10:05am.
Hoping it will work for you. Best regards. -
Aol email not working and phone vibrateing and ringing for notifications help me
have jelly bean now and aol email is telling me server password is not found so i changed my password and that did not help. how can i fix it without doing a factory reset. could not delete email account at all. my other 2 email accounts are working fine. very annoying. also my phone is vibrateing and ringing for notifications and i just want it to ring. if i wanted my phone to vibrate i would put it on vibrate. would somebody be able to help me with my problems thanks. everything was working fine before jelly bean. also what happened to the notifications bubble on the lock screen i kind of thought that was handy to have.
boychik0830,
Never fear help is here! Congratulations on your Jelly Bean software update! Email, and ringers are very important, so let's get this fixed asap.
You can delete the email account from the device http://bit.ly/PfAUeF , then re-add the email account back to the device. You change your ringtone settings from vibrate & ring to just ring in the sound settings menu. Hope this helps!
Thanks,
Pamelaf_vzw
Tweet @vzwsupport -
How to make a rollover image, but not for a button
Hello,
I should probably not care so much about this, but I'm
wondering how to make an image have a rollover state without making
it a clickable button. See the link below, and when it all loads,
move your mouse over the "go home" button at the bottom. I'd like
for that rollover to happen but without the little "link hand"
showing up, you know? I know how to do this in html but I'm new to
flash so I'd love it if somebody here could help me out. Thanks!
Here's the link:
http://www.designedbytim.com/flash/holycrap its tim wrote:
> Hello,
> I should probably not care so much about this, but I'm
wondering how to make
> an image have a rollover state without making it a
clickable button. See the
> link below, and when it all loads, move your mouse over
the "go home" button at
> the bottom. I'd like for that rollover to happen but
without the little "link
> hand" showing up, you know? I know how to do this in
html but I'm new to flash
> so I'd love it if somebody here could help me out.
Thanks!
>
> Here's the link:
http://www.designedbytim.com/flash/
>
onClipEvent (load) {
useHandCursor = false;
i hope this works.
Michael Katindig
www.somnotikroom.tk
\\ illustrator and multimedia designer // -
How to make chords by making the notes end at the same time
Hello!
I have joined two tracks hoping to create a chord. However, the notes do not end at the same time so the chord is not achieved. I am wondering how to create a chord, mainly how to make it so the notes in a chord end at the same exact time. Any help is greatly appreciated! thank you!You already posted this in another thread. Why start another?
http://discussions.apple.com/message.jspa?messageID=9873386#9873386
It just makes it harder for people to help you and for others looking for answers. If you still need help you can just "bump" the original thread. -
How to make phone call or fax?
Is there any class that can make phone call or send fax?
or anything that related to phoneline.
any information would be good.
Thanks!!JTAPI
Maybe you are looking for
-
Is it possible to sort items by kind but always show folders first?
Hi, In column view, is it possible to sort items by kind but always show folders first? There's a hack explained here: http://www.bece.org/Home/tabid/36/EntryID/5/Default.aspx but by using this hack, in list view, the kind for folders is displayed as
-
I just need to get my licenses again, adobe was taken off of laptop
Laptop, due to freaking Windows 8, had to do a refresh and Adobe was uninstalled, need to get my license again so I can use the program I paid for again. Thanks
-
Dreamweaver CS6 server behaviour panel (+) (-) inactive
In my Dreamweaver CS6 server behaviour panel bothe and signs are inactive due to which I m unable to add Lon in User for my login form .. plz help me, many thanks
-
Where can i get stuts-faces integration library
can any one help me in finding stuts-faces integration library and some good examples on jsf+struts
-
Payflow Pro password authentication issue
Hi, I posted this elsewhere but it might have been in the wrong forum...so here goes again. I changed my password on paypal manager not realizing it's the same password linked to Payflow Pro. Shortly thereafter, I received an error indicating 'User a