HOW TO MAKE PICTURE ON SCREEN VERTICAL

The w2207 can be used horzonaly or verticaly. I am setting up 2 screens on one computer, Dell OPTIPLEX GX620, (windows 7 / 64-bit). One horizontaly one vertical. I have 2 issues: First issue: Windows7 does not recognise screen 2 on control panel. Screen 2 duplicates Screen 1. I have a poweredsplitter to divide up the audio/video for additional screens. Screen 1 and Screen 2 are connected to outputs. A thirdoutput is connected to a tv/monitor. All screens have the same picture at the same time. My guess is I would need toconnect Screen 2 by another means so the Windows7 will recognize it?? Maybe use DVI or HDMI don't know, asking? Second issue, I can mechanically rotate the screen from horizontal to vertical, but the text/picture stays horizontal.My View Sonic changes to match the screen position like a cell phone. The HP does not! NOTE:The View Sonic is 15 yrs. old. Need to know how to match text/picture to screen position. DVO33308

Before doing anything, backup your current iWeb Domain file — usually located here:
Unless someone else chips in with an alternative, I think you'll have to start a new Blog page and copy & paste.
But bear in mind that problems with iWeb's blog are a recurring theme on these forums: Lost all blog entries or all comments or unable to publish, etc. For a success story using a non-iWeb blog hosted on WordPress, see this old thread:
_To blog or not to blog_

Similar Messages

How to make picture in picture video semi transparent?

I do know how to make picture in picture semi transparent if I import a photo instead of a video. However, if I import an video and want that video to be semi transparent at the right top cornor, I can do so with imovie? I know I can make the second video semi transparent if I use cutaway instead of picture in picture. However, I do not want the second video fill the whole screen, just the right cornor of the whole video.
Please reply if you know how to do it in imovie. Thank you

renaixbf wrote:
... video to be semi transparent at the right top cornor, … I can make the second video semi transparent if I use cutaway ... I do not want the second video fill the whole screen, just the right cornor of the whole video.
your wording confuses me ... what exactly do you want to accomplish:
a cut-away replaces video, but keeps audio - that has nothing to do with 'transparency' (??)
for sure, you can place and resize a PiP anywhere on the screen (pic#1)
or, do you mean by 'semi-transparent' keying a PiP? (pic#2) A color-key within a PiP is not optional in iMovie; although, I tested it: if your source video contains 'alpha transparency', iMovie support that either.
https://sites.google.com/site/karstenschluter/im09-counter
or, do you want to manually change the compositing mode (pic#3)? That, indeed is not optional in iMovie.
or, did you mean by 'just a part' cropping a PiP/second layer (pic#4)? Again, not optional in iMovie, complex compositing effects are habitat of professional tools such as FCPX.

How to make a split screen picture?

How do I make a split screen picture from 2 different pictures?

Are you using Photoshop or Photoshop Elements?
This question would be better posted in the Photoshop forum.
Try http://forums.adobe.com/community/photoshop/general

How to make pictures on the iPhone 5 in full screen?

Photograph on the iPhone 5. When viewing the photos on the iphone 5 at the bottom and top of the screen black bar. How to make photos to be full screen?

Hi Nimesh,
Just add the adddition default 'X' for the first radio button .
Syntax :
PARAMETERS : button1 RADIOBUTTON GROUP r1 USER-COMMAND m1 default 'X'.
Reward points if useful
Thanks & Regards,
Basha

How to make picture button in oracle forms?

can any one tell me how to make a picture button in oracle form builder?
please help?

Hi,
Only a icon can be pasted on the push button. We can not user jpg,,jpeg or gif for the picture only ico file can be used.
go to properyt pallet,
make iconic as yes
give the path in icon filename --- C:\Program Files\Winamp\eMusic\eMusicClient
where eMusicClient is -- icon file name without extension, dont use " " in path
bye

How to make a selection screen two fields obligatory

Dear friends...
   I wish to know how i make two fields obligatory in the selection screen
like
   select-options Po_Num for ekpo-ebeln obligatory.
   select-options Po_Date for ekko-aedat.
   select-options Material for mara-matnr.
in the above example i am looking for po_num and po_date both obligatory but if i dont enter data in the po_num, po_dat becomes obligatory and po_dat has no data entererd po_num is obligatory. i wish to know how i achieve single field act as a obligatory in absence of another field. please help in this regards..
thanking you,,,
regards.
Naim

REPORT ZMM_COMP_POS no standard page heading line-size 225
tables: ekko, ekpo, mara.
data: begin of i_ekko occurs 0,
      ebeln like ekko-ebeln,
      ebelp like ekpo-ebelp,
      matnr like mara-matnr,
      aedat like ekko-aedat,
      waers like ekko-waers,
      ernam like ekko-ernam,
      end of i_ekko.
data: begin of i_ekpo occurs 0,
      ebeln like ekpo-ebeln,
      ebelp like ekpo-ebelp,
      matnr like mara-matnr,
      aedat like ekpo-aedat,
      waers like ekko-waers,
      menge like ekpo-menge,
      meins like ekpo-meins,
      ernam like ekko-ernam,
      lgort like ekpo-lgort,
      netwr like ekpo-netwr,
      recd(16) type p decimals 3,
      rec_val(16) type p decimals 3,
      end of i_ekpo.
data: lines type i.
data :itab_output like i_ekpo occurs 0 with header line.
data: itab_output3 like standard table of itab_output .
data data.
data total like sy-dbcnt.
data recd(16) type p decimals 3.
data rec_val(16) type p decimals 3.
data : it like i_ekpo occurs 0 with header line.
selection-screen begin of block b1 with frame title text-010.
select-options Po_Num for ekpo-ebeln .
select-options Po_Date for ekko-aedat.
select-options Material for mara-matnr.
selection-screen end of block b1.
at selection-screen.
if po_num[] is initial
and po_date[] is initial.
message e001(00) with 'Make at least one entry'.
endif.
start-of-selection.
if PO_NUM is initial and
     Po_Date is initial or
     Material is initial.
         select ebeln ebelp matnr
                menge meins netwr
                aedat
                from ekpo
                into corresponding fields of table i_ekpo
                where ebeln in Po_Num.
endif.
        loop at i_ekpo.
              select ebeln aedat waers ernam
                     from ekko
                     into corresponding fields of table i_ekko
                     where ebeln in Po_Num.
              if sy-subrc = 0 .
                 i_ekpo-aedat = i_ekko-aedat.
                 i_ekpo-waers = i_ekko-waers.
                 i_ekpo-ebeln = i_ekko-ebeln.
                 i_ekpo-ernam = i_ekko-ernam.
                 modify i_ekpo transporting ebeln aedat waers
                                            ernam
                                            where ebeln = i_ekko-ebeln.
                 clear i_ekko.
               endif.
           endloop.
           describe table i_ekpo lines lines.
           if lines le 0.
              message e017(zk).
           endif.
      select ebeln ebelp matnr
             menge meins netwr
             werks
             from ekpo
             into corresponding fields of table i_ekpo
             for all entries in i_ekko
             where ebeln = i_ekko-ebeln .
      sort i_ekpo by ebeln ebelp.
      sort i_ekko by ebeln.
      loop at i_ekko.
        read table i_ekpo with key ebeln = i_ekko-ebeln.
        if sy-subrc = 0.
                 i_ekpo-aedat = i_ekko-aedat.
                 i_ekpo-waers = i_ekko-waers.
                 i_ekpo-ebeln = i_ekko-ebeln.
                 i_ekpo-ernam = i_ekko-ernam.
           modify i_ekpo transporting ebeln aedat waers
                                      ernam
                                      where ebeln = i_ekko-ebeln.
       endif.
    endloop.
describe table i_ekpo lines lines.
if lines le 0.
    message e017(zk).
endif.
loop at i_ekpo.
   write:/1 sy-vline,
       (5) i_ekpo-ebeln left-justified ,sy-vline,
       (10) i_ekpo-ebelp left-justified ,sy-vline,
       (15) i_ekpo-aedat left-justified ,sy-vline,
       (18) i_ekpo-ernam left-justified ,sy-vline,
       (23) i_ekpo-matnr left-justified , sy-vline,
       (27) i_ekpo-menge UNIT i_ekpo-meins left-justified , sy-vline,
       (29) i_ekpo-meins left-justified , sy-vline,
       (31) i_ekpo-netwr CURRENCY 'INR' left-justified ,sy-vline,
       (33) i_ekpo-waers left-justified ,sy-vline.
endloop.
   write:/(743) sy-uline.
top-of-page.
    write:/30 'ESSAR CONSTRUCTIONS LTD.' color 6 inverse.
    write:80 'DATE :' color 6 inverse, sy-datum color 6 inverse.
    new-line no-scrolling.
    write:/30 'PO Details.' color 7 inverse.
     write: /(743) sy-uline.
format color col_heading on.
     write:/1 sy-vline.
     write: (5) 'PO no.',sy-vline,
           (10) 'Item no.',sy-vline,
           (15) 'PO Date' color 1,sy-vline,
           (18) 'PO Created By.',sy-vline,
           (23) 'Material No.', sy-vline,
           (27) 'PO Quantity', sy-vline,
           (29) 'PO Unit', sy-vline,
           (31) 'PO Value',sy-vline,
           (33) 'Currency' , sy-vline.
    write:/(743) sy-uline.
    format reset.

How to make it full screen

Hello
I have made a slide show and I will be showing it threw a projector and I do not know how to make the slide show full screen.
So how do i make the show be full screen?
Thanks
Greg Wyatt

hey there Greg & welcome to Discussions.
connect the projector to the Mac using the appropriate adaptor & cable, open System Prefs. > Displays > Detect Displays > Gather Windows. set rez for the projector & turn off Mirror. that's how you play your slideshow "through" the projector.
good luck.

How to make background fit screen

how to make background fit screen

go to settings
go to desktop & screen saver
there you have a dropdownbox with all the options

How to make The Java Screen Recorder similar to this one?

Can u talk about this how can make this code with java?
http://www.devharbor.com/java/300-Screen-Recorder.html
The author of this application says this maked by Java Swing.
My Question is:
What is Java Swing?
It's easy to make this app?
What API/Component needed for export video to MP4 Format like this application?
How can make a similar application for education purpose with Java.
Thanks

808154 wrote:
:) Thank you for answering my question,
but impossible in nothing bro, Yea, that's what Aleksey Vayner claimed and he didn't do so well.
I need to know about swing and start to work with java to develop this software and if I need some help I ask here.Clearly yes. You also need to make simple programs and practice for a long time before you're gonna be able to write a screen recorder with MP4 output.
I try to develop this before 3-4 years ;)I guess 3-4 years is a realistic goal, if you really concentrate on learning Java.

How to make a VGA monitor vertically display under an Intel GMA950?

I have a Philips LCD Monitor (200WS8) attached to my thinkpad X41, and wanna use it vertically to display content while the internal screen of X41 have a normal display. But without success, the Philips LCD can get rotate 90 degree clockwise but poor freshrate , which seems that every operation (such as scroll in firefox) in display is really slow, and annoying font display.....
I use this command:
xrandr --output VGA --rotate right
Then I test the internal screen of X41 with the command of "xrandr --output LVDS --rotate right" and got almost the same result....
Is it possilble to make a vertically display on an Intel card...or... this feature is depended on LCD?

All right,I have set up my Philips LCD vertical display content with normal built in screen... need playing with xrandr & xorg.conf more then....
one question, intel driver in linux support vertical screen?
Last edited by andywxy (2008-11-19 15:23:01)

How to make a big screen PLAY button for FLV which will fade away after the movie starts?

I wanted to make play button. Kind of this huge one in the middle of the screen as users used to see on YouTube.
Here is the code for it which seems to work:
play_btn.addEventListener(MouseEvent.CLICK, onClick_Play);
function onClick_Play(event:MouseEvent) :void {
SWF_flv2.play();
The problem is it doesn't dissapear once the video plays. How shoudl it be done, the whole video has to go to another frame with no play_btn on it or there is a code which can make it fade away?

The FLVPlayback component can be set to use any number of controls for the video playback. You should use those for playback control once the video has started. If you do want to create all of your own custom controls, here's an Adobe tutorial on the FLVPlayback control structure: http://help.adobe.com/en_US/as3/components/WS5b3ccc516d4fbf351e63e3d118a9c65b32-7f00.html
And here is a third party tutorial on creating your own controls: http://www.lemlinh.com/as3-video-player-tutorials-roundup/

HOW TO MAKE A RADAR SCREEN SIMULATOR ?

I HAVE BUILT A ROTATING NEEDLE ON A SCREEN USING A WHILE LOOP AND I NEED TO CREARE SOME RANDOM OBJECTS FLYING THROUGH THAT SCREEN TO FORM A RADAR SCREEN SIMULATOR
Attachments:
RadarSimulation.vi ‏33 KB

Sacha had it right with moving a picture control. I don't think you need to make your radar control transparent though.
Here's a version of your code with a couple of planes (read from JPEG files) flying across it. You may need to change the path constant on the diagram depending on where you copy these files.
Attachments:
plane1.jpg ‏1 KB
plane2.jpg ‏1 KB
RadarSimulation.vi ‏82 KB

How to make HTMLPANEL have a vertical scroll bar?

The content that I load into the panel is longer than the panel itself. How do I make the
panel have a vertical scroll bar to contain all the data within it.

Add
overflow: auto;
or
overflow: scroll;
to your style definition of the panel. You can also use
overflow-y: auto;
or
overflow-y: scroll;
which gives only a vertical scroll bar.
Beth

How to make picture part of Excel and have siena take that image?

Hi,
I've got a gallery which is taking information from my excel sheet. It a name and picture column. For each name, I had image URL which directed to my pictures folder. (C:\C:\Users\exampleuser\Pictures\...).
This worked really well. But I recently tried to publish the program and ran it on my windows RT tablet to see how it looks - and the pictures are all missing. I realize this is because on the excel sheet refers to pictures that aren't there on the tablet,
but are there on the PC.
I've tried embedding the images themselves into cells but Siena doesn't take the picture.
Is there any other way this will work? Preferably, I would like the image not to be directed to any online links.
Thanks in advanced,
RT-XD

Hi RT-XD,
When you were publishing the app, did we ensure that "Download and include images, video and other media from Excel and SharePoint" was checked with the picture column as the path to the image on the file system? Siena should download the resources
specified in the Excel document and package with you app.

How to make a splash screen

Hello everyone,
I am trying to make a kind of splash screen.
I use JWindow for this and it works well.
My problem is, that I need to make the background of the screen "non-opaque". So only the image I add will be shown, without the background rectangle.
I search for something like setOpaque(false) method in class JButton.
But there is no such method for this class.
I would be very happy if you could help me.

I tried this,
but it does not help. The background is being shown.
import javax.swing.*;
import java.awt.*;
public class SSB extends JWindow
     public static void main(String[] args)
          new SSB();
     public SSB()
          super();
          this.setBounds(20,20,300,300);
          MyContainer c = new MyContainer();
          c.setOpaque(false);
          this.setContentPane(c);
          this.show();
     class MyContainer extends JComponent
          MyContainer()
               super();
[\code]

HOW TO MAKE PICTURE ON SCREEN VERTICAL

Similar Messages

Maybe you are looking for