How to make place in the had disk

HP Pavilion dv6 Notebook PC 
Hello,  I've become a warning about a failure in my hard-disk.   I see the spart D is full with the Recovery.
Well,  I 've a externe hard-disk an I've  saved the recovery in it.  
I went to the support and  I've repared these problem,  but the warning is come again and again about a failure in my hard-disk and the risk to lost a part or all my dates.  
What can I do?  
Thank you for your answere.

Hello @capalbosalvador ,
Welcome to the HP Forums!
Since the computer is showing a message that a hard disk is failing, I would contact HP phone support to discuss hardware and servicing options.  I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • How to make restriction for the description of value in the transformation

    one infoobject AAAA which has value T001, T002, T003...
    the description of value
    T001 - Heywemay
    T002 - Heyrtya
    T003 - Tyuatyew
    I need to make routine in the transformation, when the description of value that contains "Hey", then we need to load it into infoprovider, otherwise we need to delete data package. Now the issue is  the filed in source is only Key, not description. But, we had maintained the description for infoobject AAAA. Anyboady know how to make restriction in the transformation, ?
    that means we only need to load data into infoprover once the description of value that contains "Hey". Should I add field 0TXTMD into infoprovider and make the link from infoobject AAAA? Thanks for any input.

    Hi,
    Write the Start routine to delete complete data packet whic won't have "Hey".
    DELETE SOURCE_PACKAGE WHERE TXTMD NP '"Hey'.
    If  you want load the data with blank for that InfoObejct if it won't contains "Hye".
    Write this code at TXTMD infoObejct level.
    if  SOURCE_PACKAGE-TXTMD NP 'Hey' .
          RESULT = ' '.
      elseif SOURCE_PACKAGE-TXTMD CP 'Hey' .
          RESULT = SOURCE_PACKAGE-TXTMD.
      endif.
    Note: In the above code I'm giving logic to do the same, but for code corrections please check with ABAPer.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Aug 12, 2009 10:48 AM

  • I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

    I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

    Hi ...
    Select None for payment method > iTunes Store: Changing account information
    Be aware, an auto renewing subsciption by require a credit card.

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of the FM EDIT_TEXT_FORMAT_DOC

    Hi frnz,
    How to make use of the FM
    EDIT_TEXT_FORMAT_DOC
    Could anyone explain with an example how to use this
    regards

    hi
    I need an example please....
    did any one use that FM
    Regards

  • How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite?

    How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite? I tried re-setting the media folder location, but it didn't work. What else should I do?

    The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

  • How to make iTunes read the song's name/singer from the file's name itself?

    Hi everyone,
    So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
    So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • TS1702 how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space

    how do i delete from the startup disk? I am trying to get Mountain Lion from the App store and it says that the purchase was not complete because i need 4.06 GB space to download OS x 10.8. and to remove items from my startup disk to increase space. How?
    Thanks

    You can use iCloud with 10.7.5. You do not need to upgrade to Yosemite. You should provide a minimum of 15 GBs of free space or 10% of the hard drive's capacity, whichever is greater.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • How to make iTunes detect the new location of music files?

    Hi everyone. I moved all of my music to a different location on my hard drive, and I changed the location in iTunes preferences, but it doesn't seem to detect this, so my library is empty now. I saved an itl, xml, and temp file as well, but I don't know what to do from here.
    I also tried dragging the new music folder onto the "Library" entry in iTunes, and this added everything, but I no longer have my ratings, playlists or anything like that.
    Is there some other way to have iTunes detect the new location? And can I get back my ratings and playlists?
    Thanks.

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • Can any body tell me how to make changes in the print layout of Fb03.

    hi,
    Can any body tell me how to make changes in the print layout of Fb03.
    I want to add comapny address on the layout.
    Regards
    Mave

    If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
    If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
    Good luck,
    Bhanu

  • How to make password for the printer to prevent coping paper from other s

     i have ( hp officejet pro 8600) how can i prevent others from making copies of paper  . when i am outside . i mean how can i lock the printer itself

    iTunes doesn't use file names to determine how music appears in your library,  Rather, it uses metadata that is split between:
    data elements that are embedded within the media files
    data elements that are included in the entries in the iTunes database
    No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes.  Using your example:
    the value of the track number element is 1
    the value of the artist element is "Elvis Presley"
    the value of the song name element is "Blue Suede Shoes"
    Depending on how you configure iTunes then the file name is either:
    completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
    dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
    then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
    the file is in a folder called "Elvis Presley" (the name of the album)
    that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
    Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works.  There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step.  However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

  • How to make and Burn the project to DVD

    Would you pleased advice me how to make and burn the Project to a DVD as I'm new user for the Adobe Premier Pro.
    Tks & B/regards,
    Handjojo

    As said before you need Adobe ENCORE to make dvd menu and burn to dvd.
    But first you need to download and install Adobe ENCORE.
    Follow the instrtuctions in the link below how do downlaod and install.
    Encore CS6 not installed with Creative Cloud
    Then go over to Adobe TV.
    How to make a DVD.
    AdobeTV Learn Encore CS4 
    Learn Encore CS5 | Adobe TV 
    Using Premiere Pro CC & Encore CS6 for Bluray, DVD, and Interactive Video for iPad,ATV, and Mobile HD | DAVTechTable | Adobe TV 

  • How to make records  to the table TRFCQIN

    hi all,
    anyone can tell me
    how to make records  to the table TRFCQIN
    regards

    Hi Wanna,
                    Write a module pool program to enter record into table TRFCQIN.
    Take fields to which u want to make entries in module pool.
    Use insert command to append data in table TRFCQIN.
    Refer this code :
    CASE OK_CODE_101.
    WHEN 'SAV1'.
    TRFCQIN-QNAME = 'XYZ'.
    TRFCQIN-QCOUNT = "Screen field name at which user will enter value
    INSERT TRFCQIN.
    if sy-subrc <> 0.
    message e007.
    else.
    clear TRFCQIN.
    clear ok_code_101.
    endif.
    endcase.
    Reward points if helpful.
    Regards,
    Heamnt

  • How to make an applet the default one ?

    Hi everybody,
    I have a NXP JCOP41 72k JavaCard, Eclipse 3.2 with jcoptools 3.1.2, jre 1.5.
    I have read in a lot of places that it was possible to make a specific applet the default one, meaning that my applet will reply to APDUs as soon as it is powered up... I don't want to go through the Card Manager and select my applet everytime it is power up.
    How can you do this, and at what level will I have to do it ?
    This is what I already tried:
    1- I have read through the GlobalPlatform specification, and they say that it is possible to put a certain flag on a application in order to make it default. So this is what I tried... I had my card in the OP_READY status mode, and I tried to put the application in the 'LOCKED' mode in order to make it the default application using the set-status APDU command from GlobalPlatform. It did not worked.
    2- After that, I tried something else. I put the card in the SECURED status mode, and I tried to put the application in the 'LOCKED' mode, but then I think I locked the card. I was not able to authenticate to the card anymore using the init-update command and the 255 keyset. How come the default keyset is not available anymore when you are in SECURED mode ???
    Again, how do you make an applet the default one ???
    Thanks a lot for answering,
    Richard Leroy

    Hi everyone,
    I finally have found the answer to my question, and felt important to let everybody know it ...
    In order to make an applet the default one, you need to upload it and install it with specific privileges...
    With gpshell, you need to add "-priv 4" to the "install" line in order to activate the default option. This will enable a specific flag for the applet.
    Once this is done, you will have to select the applet with the appropriate APDU, and your applet will be the default one.
    You can also get more informations on globalplatform spec 2.1.1 on page 107.
    Richard

  • How can I partition, clone the boot disk, no cd?

    How am I going to partition my boot disk? I only have the OS that came on the hard drive, no cd.
    Tried start up c key on tiger 10.4 but it did not start from that cd where I thought perhaps I could administer this partitioning.
    And further, how can I clone once done, no cd.

    Let me see if I have this straight:
    You want to partition your boot disk. That's it right?
    All you need to do is clone your boot drive to another partition, disk, external, etc. You can use either superduper! (recommended), carbon copy cloner, or even just use osx disk utility.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.macupdate.com/info.php/id/7032/carbon-copy-cloner
    Once you clone your boot drive, make sure it boots up first. Then if everything is good, re-partition the boot disk (erase) into however many partitions you need in Disk utility.
    Then boot up from your clone you just made, open for example superduper, and clone back to your new partitioned drive. Bootup from the new partition drive, and you are set.
    You don't need the CD to partition or even clone using DU.

Maybe you are looking for