How to make PO reject in workflow.

Hi experts,
I have finished multi-level PO release in workflow with WS20000075 and some self configuration, but fail in PO reject with WS65400030 (multi-level).
How to make it?
thanks.
HERO

Hello ,
Yes, please use template WS200000075, and after the initial task TS2000016,
The outcomes are either Po Release, PO Rejected or PO chnaged significantly,
Use the task TS20000167, it is defaulted so there is no way you cannot see it, it would say "Release of PO Cancelled", you could use this for further action

Similar Messages

  • How to make call reject?

    I have CallManager 4.2 and I want to make call reject functionality when the phone is on-hook and ringing. There is only answear and iDivert softkeys in this mode. It is possible to make iDivert to invalid number but I'm looking for more elegant solution.
    Thanks

    Are you using H.323 to the GW ?
    If so it could be possible to idevert to a service that disconnects the call and does not actually answer or give busy tone. Howeve depending on the network, that may have the same effect to the caller.

  • How to transport changes made on Workflow Template to other cleint

    We have make changes to Workflow template via tcode PFTC_CHG (Change Task), with workflow builder screen, we make changes on the standard task, work item text etc, save the changes to workflow template WS90000XXX. However the changes we make is not save under a Transport Request number.
    How to make the changes on workflow template to save under a transport request and transport it to other client. ?

    Hi Eric,
    All development and customization of workflwo are saved in a transport request.
    If while making the changes it did not prompt you for a TR then check the TR in whcih the task was created.
    To port TRs follow the below procedure:
    1. Go to t-code SCC1.
    2. Select the transport request number and enter the source system (client)
    3. Click on 'Including Request Subtasks.
    4. Click on button 'Start immediately'
    This would port the TR.
    Please note to port workbench TRs before the customizing TRs.
    Regards,
    Saumya

  • How to make a restart of the workflow in a process controlled workflow?

    Hi Experts,
    How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
    The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
    The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
    Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
    Thanks and regards,
    Ranjan

    Hi,
    Restarting workflow goes to 1st level approval step. It is not requester.
    I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
    Regards,
    Masa

  • Workflow, How to make the attached SAP shortcut linked to a webgui t-code ?

    How to make the attached SAP shortcut linked to the webgui ? (Instead of the SAP Gui )
    When I received a "workflow msg" in my outlook inbox, I clicked on the attached shortcut.
    And a logon pop-up comes to me, in order that I logon to SAP in the SAPGui mode.
    It enables me to make a decision in SAP.
    I'd like that when the user receive the shortcut ( or a link ), it opens the webgui mode ?
    How can I do that ?
    Thx a lot,
    Erwan

    thx

  • How to make the workflow available for Contract Template ? CLM

    Hi expert,
    It seems that no workflow can be defined in the Library Item Phase Configuration .
    The customer needs the approval workflow for the contract template also ,so does anyone know how to make it
    possible with configuration or Dev ?
    Your help is highly appreciated !
    Thanks a lot !
    Regards,
    Lilian

    Refer :
    7 Component Configuration Dependencies
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1008620
    Web Cache
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1016697
    3.2.2 MIDTIER OPCA Mode
    http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgbasic.htm#1008246
    - Senthil

  • HOW TO MAKE WORKFLOW DYNAMIC..???

    HI,
    i am working on a workflow in which i have to assign users to a certain role but the problem which i am facing is that firslt all these roles were static i.e. they were hard coded earlier so the new roles which i am making,they are not reflecting in the workflow.
    So can anyone help me as to how to make it dynamic so that the new rles which i am maiking should also start reflecting..

    Calculated field should help -
    see here for more information on this topic,
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/400cc218-ea7f-4f9d-a3eb-c5289bdc05c4/sharepoint-designer-workflow-custom-subject-lines
    http://sharepoint.stackexchange.com/questions/43301/how-to-set-the-subject-of-the-email-to-have-a-combination-of-static-words-and-fi
    http://blog.henryong.com/2008/01/07/custom-sharepoint-designer-subject-lines-with-calculated-fields/
    If the subject is predefined in list, you could try to populate the data from the list using string builder.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to make the workflow users as active users in SAP R/3

    Hi All,
    We have got an issue in R/3 system where a certain number of users who are created only to approve work flows via Outlook emails.
    They are not required to log in to the system at all. Due to this,the users are getting locked by a Security background job which locks all the inactive users.
    Now My question is how to make these work flow users as active users in R/3 system so that we can avoid locking of these users.
    Awaiting your response.
    Thanks in advance
    Ramkumar C

    Hi All,
    We have got an issue in R/3 system where a certain number of users who are created only to approve work flows via Outlook emails.
    They are not required to log in to the system at all. Due to this,the users are getting locked by a Security background job which locks all the inactive users.
    Now My question is how to make these work flow users as active users in R/3 system so that we can avoid locking of these users.
    Awaiting your response.
    Thanks in advance
    Ramkumar C

  • 1080P mixed with 720P - how to make the workflow work best?

    Dear Forum
    I am starting a new documentary and before i start i want to clear something out..
    I have shot most of the footage in 720P But maybe about 1/3 of the footage is in 1080P (I was requiered to do so because some of the footage was used for television)
    My question is: How do i start my project workflow with mixed footage??
    When choosing a 1080P sequense and scaling to resize the 720P footage, i am unable to use the warp stabiliser on the "up-Scaled" 720P footage... Thats basicly the problem..
    Please Help!
    Thanks in advance!
    - Simon

    Do a test for yourself
    Not sure about that  film grain idea though!
    Here is your upscale....

  • How to make data flow from one application to other in BPEL.

    Hi All,
    I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
    I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
    Experience people please guide.
    Sales Person -----> Sales Manager ----> Production Manager
    Thanks
    Yatan

    Yes you can do this.
    If you each integration point to be in different process, you have to create three BPEL process.
    1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
    2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
    3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
    -Ramana.

  • Reject in Workflow

    Hi All,
    How can we make REJECT in workflow. I didnt find any option for REJECT in Visio. Can and body help me in this?
    Regards,
    Nikhil

    I think you are searching this option in MS VISIO screen under Approver stencil property.... That's not correct.. Follow below points:
    Login to data manager by using approver user name and password
    Go to Workflow tab in record mode
    you can see workflow task pending in his/her queue(if you have use approver stencil currectly)
    right click on that task...you will find done, undone, approve, disapprove, send next step etc based on your design of workflow...
    Hope this solves ur query...
    thx,
    R.n
    Mark useful if this helps!

  • How to make a slide show or edition including mpeg and other formats

    Hi,
    I am i bit puzzled by the use of iphoto/imovie/itunes.
    I have a Sony camera which generates jpg photos and mpg videos; besides, i have 3gp and mp4 videos from cell phones.
    Firstly, i imported all of them to iphoto. I used a automator workflow to help importing from hotsynced Palm centro files, to discover the first problem with the 3gp files: they could not be iported by workflows.
    Still, they could be seen in iphoto, but then i tried to make a slide show. My idea was to put the photos and videos of a certain event to be watched together, or at least to be able to watch the videos in a sequence, without having to click on each one.
    I didnt get it in iphoto, so i switched to imovie. it was even worse, since it cannot import the mpgs and the 3gps (the jpg photos were ok). What could i do about that? is there any converter or other way?
    then i tried the itunes, and it was the opposite: it imported and played in sequence the mpg videos, but not the photos. This is a workaround anyway, since the program expects to play movies, and makes my daughter a "star", but that`s ok, she is one to me.
    i'll be thankful for hints on how to make the imovie compatible with the 3gp and mpgs, or finding some way to do this edition in iphoto or even with itunes.
    regards

    I see, it sounds reasonable , i think i will buy the pro and try.
    QT Pro ($30) and MPEG Streamclip (free) complement each other. In many cases one can do things that the other cannot. For instance, MPEG Stramclip can handle/edit multiplexed formats while QT Pro cannot. QT Pro allows layering of data tracks while Streamclip does not. Streamclip merges file streams more easily than QT Pro but QT Pro allows the "Movie to MPEG-4" export to "passthrough" the video while Streamsclip does not. And so on and so forth...
    I was referring to the mpegs from the Sony camera, of which a have hundreds, shot in the last 3 or 4 years, mainly from my 5-year old daughter. Is the above true to these?
    That still doesn't help. By "sony camera," are you referring to a still digital camera (multiplexed MPEG-1) or a Sony video camcorder taking MPEG-4/AVCHD with AC3 audio in an MPEG wrapper, a Sony DVD/HDD camera storing some kind of MPEG-2/AC3 files. On a Mac, the extension MPG normally refers multiplexed MPEG-1 (or MPEG-1 audio layer) files while MPEG normally refers to multiplexed MPEG-2 video content with MPEG-1, layer 2 audio (MPEG2/MP2) but may also refer to files with MP3 or AC3 files in an MPEG, VOB, or TS wrapper. In addition it may loosely refer to elementary M2V video streams (M2V video file paired with a separate AIFF or AC3 file), a standard MPEG4/AAC file (in an MOV or MP4 wrapper) or a standard H.264/AAC file in MOV, MP4, or M4V wrapper). Since the handling, conversion, editing requirements vary with each type of file, it becomes important to what specific kind of content/file container we are dealing with here.

  • How to Make Project Code as Mandatory

    Hi ! I Need Project code as mandatory in Po's and Sales Order in Row Level. How to Make that one. Also i have a issue with approved PO's. If some PO got approved is there any option to make amendment and resend for again approval.
    Thanks and Regards
    Kamal

    Hi Kamal.......
    Try this below SP for making project Code Mandatory........
    For Sales Order:
    If @object_type='17' and @transaction_type='A'
    BEGIN
    If Exists (Select T0.DocEntry from ORDR T0 Inner Join RDR1 T1
    On T0.DocEntry=T1.DocEntry
    Where T1.Project Is Null
    And T0.DocEntry = @list_of_cols_val_tab_del)
    BEGIN
    Select @error = -1,
    @error_message = 'Please select Project'
    End
    End
    For Purchase Order:
    If @object_type='22' and @transaction_type='A'
    BEGIN
    If Exists (Select T0.DocEntry from OPOR T0 Inner Join POR1 T1
    On T0.DocEntry=T1.DocEntry
    Where T1.Project Is Null
    And T0.DocEntry = @list_of_cols_val_tab_del)
    BEGIN
    Select @error = -1,
    @error_message = 'Please select Project'
    End
    End
    If your PO is approved and you want to ammend it then your approver has to reject the PO first and it will come to you and then make edition and send it again......
    Regards,
    Rahul

  • 1. How to view my work full screen? 2. How to make "F" keys behave proper?

    Hello All,
    Two softball questions for FCP batting practice:
    1. Somewhere along the way, I came across an explanation on how to make my canvas full screen. I found a post mentioning View, External Video, and something about cinema (not in front of it right now). I don't have an external monitor, so how can I accomlish this on my laptop?
    2. Speaking of laptops, many of the "F" keys don't work as described in the manual. For example, F12 brings up a dashboard with weather in Cupertino, CA. Not exaclty conducive to my workflow. Is there a place to tell the MacBook Pro that when operating this application, default to the "F" commands within the software?
    Thanks All.
    DG

    Hey Steve,
    Point well taken. In the past week, I purchased a camera, Final Cut, MacPro, Mic, Lights, Tripod, etc. I have purchased two books that were recommended on this site (both excellent), and a CD tutorial. I have been out shooting every day, doing tutorials and editing (to the best of my ability) every night. All of that being said, it's a tremendous amount of information, and some of the finer points get lost. I am pleased to say that I have completed my first piece on hunger experienced by seniors in our community. Very gratifying.
    So, I fully appreciate the apparent laziness inferred from my post, but trust me, I'm fully engaged, just overwhelmed.
    Shane, thanks for "pinch hitting". Both solutions worked.
    DG

  • How to make the status of a sales order complete of which PART DELIVERY

    How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. <b>(Assigning rejection status not accepted)</b>

    Hi Gyana
    There is no document with me. But I can confidently say that because I am using this functionality.
    In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
    Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
    Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
    Try it.
    Rgds
    Sunil

Maybe you are looking for