How to make portrait video

I have couple clips in portrait that I'm combining into a project in iMovie, and it's saving in landscape mode.
Can I, and how do I save my movie in the original format in portrait?
Thanks.

Forgot to say I'm using iPhone 5

Similar Messages

  • Can anyone tell me how to make a video clip in color transition?

    Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
    You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
    It's on the Apple site for FC Studio as a promo clip.

    how to do a keyframe trasition in the Color FX room
    I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
    Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
    Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
    Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
    Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
    An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
    jPo

  • How to make the video looks greenish ?

    Hi there,
    Can I know how to make a video looks bit greenish ?
    Thanks

    Thanks Karsten,
    Can I know, if I have about 60 cuts on the timeline and I want all the 60 cuts to be greenish, how do I apply to all at one go (instead of having to do one by one for 60 times !) ?
    Thanks again
    Karsten Schlüter wrote:
    first 3 options coming to mind
    a) ready made: under Effects 'Nightvision' (switch-off the mask)
    b) almost ready made: under Effects, 'Colorize', set color to green
    b) Color Board, Color, push general to green

  • How to make youtube video gallery auto play (&autoplay=1) work properly?

    Does anybody know how to make youtube videos play when clicked on the thumbnails in the video gallery? I have added the auto play function in the iframe code
    (<iframe width="600" height="335" src="http://www.youtube.com/embed/lwnhB8PEuDY? rel=0&autohide=1&showinfo=0&autoplay=1&theme=dark&color=white&modestbranding=1" frameborder="0" allowfullscreen></iframe>)
    for both videos but both videos play at the same time. The videos stop playing at the same time when once clicked on one of the thumbnails.
    Here is html test file and Muse project file to see what I mean.
    Help would be much appriaciated.
    Silvis.

    Hi Vinayak,
    Thank you for you response.
    Here silvis.co.uk/muse_test.zip is a valid link.

  • Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

    Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

    Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
    Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
    NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
    John
    Message was edited by: John Cogdell - added NOTE

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • How to make a video for YouTube

    Does anyone know how to make a short video on a Macbook, to put on YouTube?

    For direct recording into YouTube or other Flash based video web sites, use Flash Settings to select between available microphones and cameras.
    If you uneed help, see Adobe's microphone suppport info at http://tinyurl.com/3e5cnl  Adobe Help for selecting your webcam is here: http://tinyurl.com/4pswu9
    Only external (Firewire) iSight (out of production for several years) has a built-in microphone.  If your Mac has a built-in iSight, it also has a separate, built-in, USB Mic.
    Either kind of microphone can be selected in your  > System Preferences > Sound > Input settings.
    If you want to use an external iSight with a Mac that also has a USB mic for some purpose other than recording directly into YouTube or another Flash based web site, you can usually select which mic to use depending on your desired purpose.
    Many apps that can recognize multiple microphones allow you to select which micriphone either via a menu choice or the app's speparate Preferences... settings.  As one example, here is how to select a mic in QuickTimeX:
    Each app works its own way, and some apps can only access the curreent System Preference setting.
    A side note for other readers who are using Mac OS X Lion 10.7.x:  Neither FaceTime Version 1.1 (258) from OS X 10.7.1 nor the current Version 1.1.1 (262) from OS X 10.7.2 can use external iSight's Firewire mic.   The firewire camera works, but the Fireiwire mic is not available for selection in FaceTime > Video.

  • Video Answer to "How to make 3D Video out of regular 2D Video"

    Didn't know how to do that and asked here this question 2 month ago - Is it possible to make 3D video out of regular 2D video file to watch further on my iPod. So I came across an answer to this on ...Youtube!
    Here are two video screencasts I found to progs that can do such thing, So I've tried and now enjoy my movies in 3D on iPod.
    If you're interested then deffo check them out:
    http://www.youtube.com/watch?v=lUYT-c5leSU
    http://www.youtube.com/watch?v=_TxRMGUwGS0

    follow advice given in this User Tip
                     How can I make a still frame from iMovie 11? (also works in iMovie 10)

  • How to make a video and picture loop

    I am trying to make a loop of video footage and pictures for my personal training studio to play in the foyer constantly. How do I do this. I am using itunes from my desk top to the apple tv. I cant figure out how to get photos and videos on my itunes library. THen how do you organize them and make it loop? Thanks to anyone who can help.

    If you want to make a video loop you would need to use iMove, or some other video editing app for that.  Then add that video to iTunes under movies.

  • TS4268 How to make cellular video call in iPhone 4S

    How to make video call in my iPhone 4S

    Did you purchase from an authorized source? I ask, because FaceTime is banned in some Middle East countries, and if you purchase from a non-authorized source, odds are you're gonna get an iPhone that originated in a country where FaceTime is banned. I suspect this is the case with your phone.

  • How to make HD video smaller! HELP!

    OK...so I bought an HD camera and the quality is SICK!Almost a bit too sick...After I am done editing and I export using quicktime conversion to .MOV the video is HUMONGOUS!
    When I say humongous I do not necessarily mean the size of the file...I'm actually talking about the dimensions of the video.
    SO, how do I make the video smaller from FCE?...I mean the actual video's original size smaller (not how to zoom out on quicktime, that is obvious) I mean how to have the video size smaller.
    Thanks.
    -John

    There are way, way too many variables to answer that question. It's meaningless without knowing what your video is, action, dialog, animation, music, speech, one minute, one hour, and without knowing you're trying to do. People have written whole books on the subject of compression. You might try a google search for video compression. Look for what you're trying to compress for, where you're trying to get to.

  • How to make a video call to a person's i phone from face time on an iMac

    I want to use face time to make a video call from my i mac to an i phone.  "help" is not informative.

    The following may help:
    http://www.imore.com/how-make-facetime-call-your-mac
    https://www.apple.com/support/mac-apps/facetime/

  • How to make a video stop in flash through an external button

    Hi everyone!
    I have a little problem: I made a flash site with its
    different sections, the first of which has a movie clip which is a
    "VideoPlaylist". So inside this movie clip I have the player and
    the videos sequenced one after the other in a TileList component.
    The problem is:
    When I go to a different page, the video in the first page
    continues to play and so you can still hear the sound, AND WHICH IS
    WORSE, when you click the button to return to the first page, the
    video starts again with the sound of the previous time still
    rolling.
    The solution would be, I suppose, when clicking to any of the
    buttons that link to another section of the flash document, add
    some action script to make the video stop (having in mind that the
    video player is inside a movie clip).
    I don't know action script, just the navigation basics
    necessary for the sections. I did the videoplaylist following this
    tutorial:
    http://www.adobe.com/devnet/flash/articles/video_playlist.html
    Can anyone help me, please!!

    You better ask in the Flash forum; this is the Flash Player forum.

  • How to make a Video loop with FCP Express?

    Hi everybody. I need to make a lot of shorts videos with jpgs extracted from a main video. But those jpgs videos must be done as a loop that will returns and plays again forever (the videos will be placed in a web site) Is that possible, and if it is, what I need to do to obtain that loop?.
    Best Regards.
    Julian Laffont.

    Hi Tom. It's not for my web site. Is for someone else . I don't know what to do or say. Should I make a video with the jpgs and tell them that they need to use the looping application of their web site? (I don't know if they have that application) Also Will be good to know if there is a specific format of video that loops in the web sites?. Wich one will be.QTM, WMV I don't know.
    Thanks.

  • [Tutorial]How to make a "video playlist"

    First off, AIR Browser IS NOT made by me! This is NOT AN OFFICAL PLAYLIST!
    Hey guys,
    Ive been looking for a way to make a video playlist and i just found a way to make one. After downloading so many apps, if found the right app. Now i put the Video Playlist in qoutes because its not really a video playlist. Its just accessing folders and playing videos
    Requirements:
    Internet connection to download the app
    AIR Browser
    Videos- Of course the ones you want to add..
    Lets get started:
    1. Download the FREE Air Browser( At the Appworld) and install it.
    2. Connect your PlayBook to your computer
    3. Go to My Computer and find your Playbook (Should be under networks or other connections or whatever). Should look like a Network Drive.
    4.Double click on the playbook.
    5.Navigate to your "videos" folder and open it.
    6.Make a folder like you would normally make a playlist. For noobs: Right click in the empty space inside the folder and hover over New then click Make New Folder.
    7. Name it and then drag and drop the videos into the folder.
    7a) You can make another folder if you want to inside that folder.
    8. After dragging and dropping, disconnect your PlayBook or keep it connected and tap the AIR Browser app that you installed.
    9. It should like exactly the folders you saw on your computer and navigate to your folder and video.
    10. Tap on the video then on the bottom left, there should be an Open button.
    11. Hit that and enjoy your videos!!
    You can also add your documents and organize them.. Ill probably make a video tutorial also soon or Post pictures.
    Hope this helped you alot!

    You can use Video Player / Playlist from FROZENFIRE
    It supports Playlist and play video continuously.

Maybe you are looking for

  • HT204266 How do I change my existing apple ID to a new one

    I'm trying to purchase apps using an iTunes gift card but when I click gift app my old apple ID keeps coming up but I have created a new ID and would like to use that 1

  • Migrate tomcat application to oc4j

    hello, i want to migrate an application built with jsp and structs from tomcat to oc4j. where can i found documentation about that? regards,

  • FLV files in dreamweaver....??

    Hello, I have just started creating websites and thus this is all still new to me so let me try to explain.  A client has asked for a website and got a Graphic designer to create a moving animation for me to put on the site.  He supplied the file as

  • Working with ascension-tech 6-DOF sensors

    I have ascension-tech's motion star system. I am trying to use LabView as the main interface program. I however can not get past the hurdle of communicating with the individual cards. We know that there will be drivers and commands, but being that th

  • Question about the CSS behavior when using layer 3 sticky and sticky table

    Hi everyone, I have a question about the CSS behavior when using layer 3 sticky and sticky table is full. If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS handle subsequent needed sticky requests ? advanced-