How to make pre-requisite plans as mandatory in SAP Hr Benefits sub-module?
I have a request to make all the pre-requisite plans (health plans, insurance plans, savings plans, etc) as mandatory in system in benefits module.
Can anybody guide me how to do that?
I have to configure the following scenario.
There are 2 health plans into the system like
a) BCBS with plan options: Basic & Special
b) Mediservice with plan options: Basic & Supplementary.
currently both the plans with all the corresponding plan options are available for hourly employees.
Changes in configuration required isthat: Hourly employees are eligible only for BCBS-Basic plan and Mediservice-Basic plan.
How do I make these changes in the system?
Kindly help
Thanks
Similar Messages
-
How to make a field profit center mandatory in sales order?
Dear GURUS,
Please help in getting answer for following question.
How to make a field profit center mandatory in sales order?
With Regards
Sandeep D.Hi,
There are 2 ways to make profit center mandatory
1.Transaction Variant
2.Incompletion procedure
1.Transaction Variant
Step 1:Goto Tcode shd0 and input transaction as va01 and give name of transaction variant as ( example. zva01 ) and click on create or F5
Step 2.Then it takes you to sales order screen.Just click on enter untill you see profit center field.
Step 3.check the box required against profit center.
Step 4.click on save ( under a package name or as local object ) and exit
Step 5.Assign transaction variant to your sales order type through tcode v0v8.
2.Incompletion Procedure
You can add the field table-vbap,field- prctr,status-04,check-warning to your existing incompletion procedure Tcode- ova2 assigned to your order type in tcode vov8 and check the box - incomplete messeges for your order type through tcode vov8.
If incompletion procedure is not assigned to your order type than you have to create a new incompletion procedure and assign it to order type. -
How to Make the Cost Center filed Mandatory ?
While entring the Doc in FI for Expense A/c, How to Make the Cost Center filed Mandatory?
Hi,
Got to field status groups and select cost center field as required field.
Refer to this documentation
http://www.sap-basis-abap.com/sapfi012.htm
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
How to make the Profit Center Field Mandatory in Cost center Master Data
Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta -
How to make the description field as mandatory in IW31 T.code
Hi All,
My requirement is make the Description field as mandatory in T.code: IW31
That field is CAUFVD-KTEXT.
How to make this field as mandatory,
I tried with BADI: IWO1_SCREEN_MODIFY
And some customer exists also (ZXWOCU04, ZXWOCU09) but unfortunately I couldnu2019t reach my functionality
Can any please help me to reach out my functionality?
Thanks and Regards,
Rambabu.Dear Friend,
go to spro - plant maintenance and customer service - maintenance and service processing - maintenance and service orders - define field selection for order header data(pm) -Field Selection for Order Header Data and Reference Object
here keep CAUFVD-KTEXT is mandatory for your order types.
Regards,
pardhu -
How to make "check for multiple logons" mandatory in webdynpro application.
Hi SDN members,
Im having a problem with an application developed in webdynpro abap.
We require that end-user only have a session per computer (ip address),
I already tried to achieve this by configuring the webdynpro application throguh SICF and going to Error Pages -> Logon Errors --> System Logon and mark the checkbox Check for multiple logons.
This configurations give only a warning when the user logs multiple times, and show a checkbox letting the user decide to end or not the previous sessions.
How to make end previuos sessions mandatory ??
Regards,
Franklin CedilloYou would have to enforce this at the application level. You can get the IP address of the current client from the framework - IF_WD_APPLICATION method GET_REMOTE_ADDRESS.
You could write an entry with the IP address into a temporary table during WDDOINIT. You could clear the entry in the WDDOEXIT. Also during the WDDOINIT, check to see if there is already an entry for this IP address. If so, then fire an exit nagivation plug to a static MIME object or BSP page that explains why the user can only be logged in once. -
How to Make Field/InfoObject Required Entry/Mandatory in DataSel of IPackag
Hi All,
How to make InfoObject or field as required/Mandatory Entry in the Data Selection TAB of InfoPackage.(Flat File Extraction)
Actually I have already Checked Selection Option of my required fields in DataSource/Transfer Structure TAB but unable to make mandatory
Rgds,
C.V.Hi,
you can do that using an ABAP program in teh infopackage. You should write code to trigger an exception and throw a message if the selection is not given.
If it is possible to give selection by calulating a date like thing you can automate with ABAP code once again and can use it in teh process chain. -
How to make the text fields as mandatory (in 'notes and attachment' tab)?
Hi,
We have defined some Fixed Values for texts under IMG>SRM>SRM Server>Cross Application Basic Settings>Text Schema>Define Fixed Values for Texts, for a certain transaction type of RFx responses for a text schema.
Because of this, the bidder can choose one of these fixed values for texts. This is perfectly working fine.
Now the question is, we want to make the texts fields as mandatory. i.e. The bidder should not be able to submit the responses if certain texts are blank.
Is there be any BadI for this?
GHYou can use BBP_DOC_CHECK_Badi for this field validation using a filter value RFx/Bid (I ont remember exact word).
Regards,
Jagadish. -
How to make Credit Control Area field mandatory in fb01, f-01, f-02, f-04
Dear all,
Whenever we are trying to create any accounting document for a Customer, we need to make Credit Control Area a mandatory field in transactions fb01 / f-01 / f-02 / f-04.
This is required because we have different Credit Control Areas for different Sales Areas for a Customer.
Can this be achieved through Customizing (making screen field mandatory) or one needs to use user exit?
Another option could be screen variant, however, it would result in multiple t-codes e.g. zfb01 / zf-01 / zf-02 / zf-04
I appreciate your help in this regard.
Thanks and Best regards,
SAP_ROIHi,
You need to write validation rule for to make Credit Control Area field as mandatory field for the Transaction codes FB01 / F-01 / F-02 / F-04 and please use T. codes GGB0 & OB28 for the same.
Regards,
Shailesh Verma -
How to make the LONG TEXT as mandatory
Hi,
In one tansaction, I need to make the LONG TEXT as mandatory.
or
I need to raise an Error message if the long text is empty.
ThanksI want to make the long text mandatory in the transaction F-66.
In this, long text field (text box) is not displaying directly for typing.
We need to click on the button LONG TEXT, then text box is opening for typing.
I need to make this as mandatory.
Thanks -
What are the System pre-requisite for the BODS installation(SAP Data services)
I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.
Hi Siddhu,
Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
Tutorial: How to install SAP Data Services 4.2 - Part 1
Regards
Arun Sasi -
How to Make Fields in Field Catalog Mandatory
Hi Gurus,
I want to Make Some Fields In Field Catalog Mandatory and Some should be Non Mandatory Can u please help me out as soon as u can.
Regards
Deep GaurHi,
IF you can specify which Field Catalog then it will be useful for us to provide appropriate answer.
1. For Customer Master
IMG> Financial Accounting New> Acs Recev and Acs Payable --> Customer Accounts --> Master Data --> Preperation of creating customer master Data --> Define Account Groups with screen layout (customers)
In that you can create your own account group, and click Details Screen.
There will Field Status header within that are listed three main areas
General data
Company code data
Sales data
When you double click these lines it will take you into "Status Group" Overview. Wherein under "Select Group" are listed fields Address, communiucation.... Double click on one group , you will bet aken into the group field wherein you will find 4 colums with indicators assigned to it. ( Suppress, Req. Entry, Opt Entry, Display) you can choose the required option. "Req. Entry" against the field. Click save after you complete your selections.
2. Similarly you can do for Material Master in
IMG --> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
But be careful when you do it for material master as it is cuts across all the modules...
Regards
Sathya -
How to make height on the HU mandatory
Dear expert. Do you know is there a way to make the height of each HU to be mandatory in VL01N, or VL02N transaction, when packing the material? The field name is HOEHE.
Thank you!Hi,
Create a Screen Variant and then assign it to the user,...
Go to Txn. SHD0.... Click on Screen Variants Tab... Enter the Transactio Code "VL02N"... then maintain the following value
Screen Variant: Maintain Value
Program: SAPLV51G
Screen: 6020.
Then click on the "Create(f5)" icon.. it will open vl02N txn. enter any outbound delivery number.. then click on packing icon, then go to the "Pack HU's" tab then click on save... Now system will popup with a screen there you search for Height field and then flag "Required".. this will make this field as mandatory.
After creation of the screen variant assign the user name to it under Standard Variants tab.
Regards
GK. -
How to view Pre requisite for a transport request
Hi All,
We want to release multiple transport at one go. Now, in that there are related developments so that one particular request should go first and then the other related request should follow. I want to know how is this achieved? Is it done by creating proposal for the one to be transported first before the other? So if one request has proposal no. 7780 then it will go before the one having proposal 7789. Is this correct?
Also, I want to know PreReq no. (Prequisite) for a transport i.e. which proposal is lined up before a given proposal. Is there any tool for that?
Thanks,
BhaskarCombine all transports into one (can be done in SE10). Dependencies will be resolved by SAP if there is only one transport.
For the next time, create one transport and create a task for every developper having only two transports (workbench and cust). -
How to make external reference field as mandatory in customised ZDCR
Hi guys,
I am working in CHARM implementation and we have defined customised transaction type for change request(ZDCR), now my client wants the external reference field as mandatory, and we are using CRMD_ORDER for creating a customised change request. Now my point is the external refernce field should be mandatory only to ZDCR transaction type and it should not effect to another transaction types who are using through CRMD_ORDER transaction code.
Kindly give ur inputs it is very urgent as the Go-live it very near.
Thanks&Regards
Sitaramaraju.PHi!
Try to modify the Dynpro of TC: CRMD_ORDER:
Start Transaction SE80.
Display program SAPLCRM_SERVICE_UI
Go to 'Screens' and select screen 7153
Go to the element list of screen 7153
Then select 'Special attr. '.
Activate the change mode.
Mark field Name: CRMT_7010_SERVICE_UI-PO_NUMBER_SOLD / Typ: I/O as required entry field.
Activate your changes and start Transaction CRMD_ORDER
Due to this modification you will need a SSCR Key for this object (see http://service.sap.com/sscr).
Hope this will help!
Best regards / Gerhard
Maybe you are looking for
-
IPhone 5 not turning on and is stuck in recovery mode
First off i have an 32gb iphone 5 which is running ios 7.0.4. Last week my iphone kept crashing and restarting by itself. then, sometime in the night the other day it went into recovery mode and the screen looked like this http://www.copytrans.net/bl
-
PrintService error LoadPluginFailed tsprint.dll ErrorCode 0x7e UserId S-1-5-18
RDP printing not working after downgrade from Windows 10 Technical Preview. Detail log as follow: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4
-
Solid Amber light ????
I have my wireless network setup with a Linksys router and I have an airport express setup so that I can stream audio to my home stereo. I have hooked it up correctly (as far as I can tell) with the airport assistant and it works great - for about 2
-
What EXACTLY uses the data?
I have an Iphone 4S with 16gb, hubs has Iphone 4 with 8. I need to help him manage his data better cause he is almost to the 2gb limit. This resets every month right? and are the games he is playing using up his data or is it pictures and text? I hav
-
Problems installing Windows 7 on new iMac?
I've heard from users on other forums that there are some problems installing Windows 7 on the new iMacs, mainly that the display goes blank partway through installation due to some kind of driver issue. Can anyone confirm this or elaborate? I've hea