How to make project name / no. visible in suppor message?

Hello,
When creating a support message (NOTIF_CREATE), I can provide a project name /project number with the message.
This info is also available, when starting the transaction monitor (CRM_DNO_MONITOR).
But when looking into the message itself, this information is not available anymore.
Where can I make this info visible?
I am assuming, that the project is somehow linked to the support message and that the project is available in principle.
Can anyone provide me a way how to link / show the project within the support message?
Thanks and Regards,
Jan

HI
another helpful link i found, but nt sure that clear ur issue
[Re: Field "Subject" in the web service desk (Incident Management)|Re: Field "Subject" in the web service desk (Incident Management)]
[Re: User Status profile in Service Desk|Re: User Status profile in Service Desk]
jansi

Similar Messages

How to make a new section visible in the server published version

I use UPK 12 Client.
When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outline, the outcome includes the new section created.
When I do the exact same procedure, but choose to click Publish > server (which is set up for my UPK) > Publish entire outline, the outcome does NOT include the new section created, but everything else yes.
How to make the new section visible in the server published version?
Thanks!
Sille

Hi Sille,
Are you publishing over knowledge center? or is it publishing to a network drive? Once you check in the section save the module once and try again. See if it makes any difference.
best regards,
SD

How to make the exe always visible in the illust application.

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
Regards,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make the exe always visible in the application window

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
Thanks,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make project across two DVDs with one DVD menu

Hi!
I’m working on a large project (3 hours of video with about 10 chapters, over 50 pictures in a playlist, and special feature chapter) and wondering is it possible to make an project across 2 or more DVDs, but to have menu only on first one? I’d like to make an project that comes with menu only on first DVD and when you click on e.g. “special features” button, then you get the message “please insert DVD 2″
Is it possible and how to make something like that?
Thank you!

I would have EACH DVD begin with a menu. Somebody will insert DVD 2 first no matter how you label things.
Yes, you are right! People just don't want to read, but I'm making an animated menu in AE and it'll take about 300MB (rendered in .mpg). That is what I want to avoid on other DVDs to save some space. You just gave me an idea so I'll make some small menu for other one or two DVDs with just a few informations about what DVD is inserted and what DVD you need to insert if you want to watch something else from that project. Thank you!
I just have to learn better Encore and its capabilities and limitations (if I have time )

How to Make Project Code as Mandatory

Hi ! I Need Project code as mandatory in Po's and Sales Order in Row Level. How to Make that one. Also i have a issue with approved PO's. If some PO got approved is there any option to make amendment and resend for again approval.
Thanks and Regards
Kamal

Hi Kamal.......
Try this below SP for making project Code Mandatory........
For Sales Order:
If @object_type='17' and @transaction_type='A'
BEGIN
If Exists (Select T0.DocEntry from ORDR T0 Inner Join RDR1 T1
On T0.DocEntry=T1.DocEntry
Where T1.Project Is Null
And T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
Select @error = -1,
@error_message = 'Please select Project'
End
End
For Purchase Order:
If @object_type='22' and @transaction_type='A'
BEGIN
If Exists (Select T0.DocEntry from OPOR T0 Inner Join POR1 T1
On T0.DocEntry=T1.DocEntry
Where T1.Project Is Null
And T0.DocEntry = @list_of_cols_val_tab_del)
BEGIN
Select @error = -1,
@error_message = 'Please select Project'
End
End
If your PO is approved and you want to ammend it then your approver has to reject the PO first and it will come to you and then make edition and send it again......
Regards,
Rahul

Based on DDL value ,How to make few other fields visible in Adobe forms in SAP CRM??

Hi All,
        I need to make few fields visible in adobe forms, based on the dropdown value which user selects.....

Hi Vignesh,
     In the "EXIT" or "CLICK"event of the particular Drop down field you can write the below code(in Java script).
if (this.rawvalue == <value> )
      <field name>.presence = "invisible";
else
    <field name>.presence = "visible";
Thanks,
Ashok N.

How to make the ERP orders visible in the interaction history????

Hi All
I am working on CRM 7.0, I am not able to find the ERP Orders created for business partners under the interaction history assignment block. How to make it visible
Regards
Jacopo Francoise

Check class CL_CRM_IC_IHISTSEARCH_IMPL (the view controller's class), method SET_ALLOWED_BT_OBJECT_TYPES, you'll see these values hard-coded.
Allowed Business object types:
gc_object_type-businessactivity TO me->gt_object_type, " BUS2000126
gc_object_type-service TO me->gt_object_type, " BUS2000116
gc_object_type-lead TO me->gt_object_type, " BUS2000108
gc_object_type-sales TO me->gt_object_type, " BUS2000115
gc_object_type-complaint TO me->gt_object_type, " BUS2000120
gc_object_type-task TO me->gt_object_type, " BUS2000125
New from CRM 7.0
gc_object_type-opportunity TO me->gt_object_type, " BUS2000111
gc_object_type-incident TO me->gt_object_type, " BUS2000223
gc_object_type-problem TO me->gt_object_type, " BUS2000224
gc_object_type-contract_sales TO me->gt_object_type, " BUS2000121
gc_object_type-contract_service TO me->gt_object_type. " BUS2000112
Rupesh

How to make field u201CMPN materialu201D visible in in transaction MEQ1

Hi, All!
In layout of screen 215 in transaction MEQ1 I see field u201CMPN materialu201D, but see this field is invisible for users. How to make this field visible?
Thank's,
Liza

Hi,
In SPRO there is no Field selection for QA. If you want to maintain QA based MPN( get the material number relevant to MPN). Press F4 and select the search criteria search by MPN, you will get the material relevant to that MPN.
Malleswari

How to make the name of a column apear as many times as the column on page

Hi,
This is what i want to do:
I have a basic report looking like this:
<Column name>
value 1
value 2
value 3
value n
Since the column is small it can fit in a page more then one time. I know how to make it print more then once: i switch the repeating frame to print down and across and i modify the frame that contains it so the horizontal elasticity is variable.
After these changes my report looks like this:
<Column name>
value 1-----------------------value n+1-----------------------value m+1
value 2-----------------------value n+2-----------------------value m+2
value 3-----------------------value n+3-----------------------...
value n-----------------------value m
What i want is my report to look like this:
<Column name>-------<Column name>------------<Column name>
value 1-----------------------value n+1-----------------------value m+1
value 2-----------------------value n+2-----------------------value m+2
value 3-----------------------value n+3-----------------------...
value n-----------------------value m
Would welcome any advice on how to achieve this please.
Thank you.

Hi,
I will suggest a solution which may appear not simple. I do not know. Il did use this method, because a Government pre-printed tax form can print six values (in colum way) each page and it was not just esthetique question.
1. Seams that you can know in advance the max number of column according to the width of the page and the length of the column.
2. You can assume that you have x column at max by ligne
3. Transforms your N rows in a table of M rows, each one with x columns : you will have N/x + N mod x
4. I did this transformation using PL/SQL piplined function to transform rows to columns (by x)
5. You base your report on the Pipelined function using select ... from Table (fnc_....) syntaxe
6. make your vertical elasticity to variable and horizontal to fixed
7. Put six labels on the top of your repeating frame (within a normal frame)
I agree, it's not the solution if the requirment is just esthetic.
Hope it helps.
Mohamed Dadi

How to make keyfigure columns in-/visible dynamically in a web template

Hello,
I want to implement a button into my web template, making a first key figure column invisible, a second key figure column visible. Clicking the button again shall make the first column visible, the second invisible.
How can I achieve this?
1) Using the filter_pane_item it is possible to choose the key figure structure and the a key figure for the analysis_item. Can this action be encoded behind a button?
If this would be clear, create a first button to choose the first key figure, then a second button to choose the second key figure. Finally enhance both buttons making one another visible and we are done.
2) An idea was to define two query views, one with the first key figure visible, one with the second key figure visible. Then again two buttons assigning the analysis item these two data providers. Finally again the trick, making one another invisible.
But this has the drawback, that after navigation, drill down, etc. in one view, then switching to the other cleary looses the navigation status.
Thank you + regards,
Ingo

Problem has been solved

How to make direct selection handles visible against pasteboard?

When I go to transform/resize images inside frames using the direct selection tool, I can't see the handles of the actual image because they are white against a white pasteboard. I am using InDesign CS5 (ver 7.0.4) on a Mac. I have been using InDesign for a few years and never noticed this was a problem; all of a sudden, the handles seem invisble. I don't remember what the color scheme was before. (Maybe I am losing my mind). Did the colors change with an update? There is an option in preferences to select the color of the pasteboard, but this doesn't seem to have any effect. In the meantime, I can't find the handles to resize/transform images. I can input a percentage for scaling, but this is only useful sometimes. How do I make direct selection handles visible against the pasteboard?

Not specifically a path. When I select an image in a layout with the selection tool, yes the frame border is the color of the layer. When I select the same image with the direct selection tool to see the full extent of the uncropped image, the border of the image is white with white handles. Since my pasteboard is white, I can't see the image border when it extends off my color layout and onto the pasteboard.

PLD How to add Project Name In Trail balance.

Hi,
how to Link to projects code and Project Nalme in Trail balance.....

Hi,
Do you know variable or database field for project name/code? In general, Financial report PLD were designed by SAP by using variables and its very difficult to find and to add it into PLD.
Thanks & Regards,
Nagarajan

How to make the list code visible?

Dear All Experts,
     How to make the list with A1 and so on visible?
     Pls refer to below screenshot:
Thanks!

Dear All,
     I already find it.
Thanks!

How to Make the Name 1 field in cost center master data as compulsory

Hi,
We have requirement from the client to make the Name 1 field in the adress tab of the cost center master data as a compulsory field when the cost center master data is accessed through KS01, KS02 T code.
There is also existing cost center master data in SAP system for which NAME 1 field is blank. How the issue of the existing master data can be dealt if there are no data NAME 1 field in the existing cost center master data.
regards
Partha B

Hi
This path refers to exit COOMKS01.... (For Cost Center Enhancement using Custom fields)
For the above requirement, I belive COOMKS02 is the right one.... (Custom checks before saving)
Br, Ajay M

How to make project name / no. visible in suppor message?

Similar Messages

Maybe you are looking for