How to make PSE default for .psd files

Hi all
I have both PS CS2 and PSE9 installed on my MAC pro, running the latest version of Snow Leopard.  If I click to open an image with a .psd extension, the system automatically launches PS CS2.  I would like the system to recognize PSE9 as my default for images.  I looked all around system preferences yesterday, but couldn't find anything. I'm sure I'm missing something.....  Thanks.

Find a closed psd file. Click it once to highlight it and press command+i for the Get Info window. Under Open with Application choose PSE, then click Change All.

Similar Messages

  • ? How do you change default for .pdf files from Reader 6 to reader 9

    I cannot change the default for .pdf files from reader 6 to reader 9. Also I cannot remove reader 6. I am running Vista

    Normally, completely removing old versions and reinstalling the latest version will reassociate all applicable extensions for the program, but it appears to have failed in your case.  There may be something else going on with your machine that is producing this behavior.  You probably need to investigate that.  But what you can do to make sure the defaults are correct is click on the start orb and select 'Default Programs.'  Then select 'Associate a file type or protocol with a program.'  From the list of file types, select each of the following in turn: acrobatsecuritysettings, fdf, pdf, pdfxml, pdx, xdp, and xfdf.  If its default program is not Adobe Reader, click on the Change Program button and select Acrobat Reader from the list (you may need to expand the lower section to display more programs than it initially provides).  If Adobe Reader does not show up in the list, you will have to browse for it.  It should be located in C:\Program Files\Adobe\Reader 10\Reader\AcroRd32.exe or C:\Program Files (x86)\Adobe\Reader 10\Reader\AcroRd32.exe.
    This method is safer than manually editing the Root\Classes in the registry.

  • Answer to how to make PSE12 default for jpgs

    Earlier I asked for help in how to make PSE12 the default program to open jpg files. I wasn't able to get my problem resolved. Until today. I contacted Adobe Tech Support.
    You need to locate your file. Mine is at C/Program Files (x86)/Adobe/Photoshop Elements 12/PhotoshopElementsEditor.
    The Editor file did not have an extension name and needed to be renamed to PhotoshopElementsEditor.exe.
    As soon as I did that, I was able to make it the default.
    Your Adobe program may be in a different place, but the steps would be the same.
    Good luck! Thanks to Adobe Tech Support.
    Message was edited by: Shelter Cove
    Message was edited by: Shelter Cove

    Find a closed psd file. Click it once to highlight it and press command+i for the Get Info window. Under Open with Application choose PSE, then click Change All.

  • Make DW default for XML files?

    I'm sure there's a way to do this that I'm missing, but I'd like to make DW my default app for XML files.  I know how this can be done on Windows (using "open with" and changing default), but I'm using Mac OSX.  I tried messing with the file types section of DW's preferences, but it didn't work.  Anyone know how to fix this?  Thanks.

    In the Mac Finder, select an XML file, and click More Info (or press Cmd+I - that's I, not a lowercase L) to bring up an Info panel. Expand the section that says Open With, and then select Dreamweaver from the pop-up menu (click Other, if it's not listed). Then click the Change All button to apply it to all XML files.

  • How to make automatic download for mp3 files [80 gb of mp3 files stored in GoDaddy]

    I'm building this site --> Matthew
    I want my visitors to download the mp3 simply by clicking the "down" blue icon. But here's the challenge, I can't do "Link to File" cause I have a lot mp3 files [80 gb total]. I believe Muse can't carry those in one file. I already stored those in my GoDaddy account.
    Right click "Save Links as.." is not an option.
    Hopefully there's another way to do it.
    Thanks!
    Debs

    Hello,
    Please look at the link below:
    Force a File to Download Instead of Showing Up in the Browser « Tips and Tricks HQ Forum
    There is a section with heading that has 3 advises under heading "How to force a file download for all my files". you can use option 1 or 3.
    Regards
    Vivek

  • How do I save my CMYK font settings & make it avaliable for all files ?

    How do I save my CMYK font settings & make it avaliable for all files ? (adobe PS indesign file)

    Could you explain what you want to do a little bit better? CMYK and fonts aren't really related to each other.
    Also, are you using Photoshop or InDesign?

  • How do I make preview default for pdf's in safari?

    I googled it and it said to go to library in your finder, but there is no "library" in my finder. what do i do?

    You can make Preview the default for PDF files you download in Safari. Locate a PDF file on your system, select it, click cmd-i to Get Info, then find the "Open With" tab, change the application to Preview, and click Change All.
    Matt

  • How do I resolve an apparent PSD file conflict

    I upgraded from CS5 to CS6 when it was released.  A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine. 
    Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
    I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
    Has anybody encountered anything like this - any suggestions about how to confirm I am using only current CS6 PSD converions?
    Environment:  Windows 7, CS6, Lightroom 4.

    Mike_W94107 wrote:
    when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
    Am I correct what your referring to in the above statement is the description for PSD file types in your window's file explorer window details view.  If so that just a string that was added to the windows registry for the file explored and not removed and is now the default description for file type PSD.  The may have happened when you removed CS5 and it restored the previous description for it though the current one was Adobe Photoshop Image file 12.  and it replaced it with the one it hade replaced in your case "PhotoshopElements.PSDFile.7"
    I have had a lot of problems removing old version of Photoshop using the normal uninstall process.  Problems were always related to Window registry updates made during the uninstall process.  These days I leave the registry out of it for the most part. I remove the uninstall entry in the registry for the versions I want to remove then just wipe the  Photoshop version install tree. I leave common file and registry intact.  I also left CS5 installed for there are just too many bugs in CS6.
    Most likely if you just reinstall CS6 on top of itself you will loose nothing and the registry will be updated with CS6 description for PSD files which is "Adobe Photoshop Image 13"... You do no need to its just a description.

  • How to make mplayer play 3gp type files ??

    how to make mplayer play 3gp type files ??
    I downloaded a Japanese blue movie by amule, but I cannot play it!

    Army wrote:Actually, a few weeks ago, opencore-amr went into [extra] and ffmpeg and mplayer are being compiled against it, so Arch's mplayer should support 3gp files ootb including audio. Video playback was never an issue, because 3gp is just a container, the video codec is usually h263 or h264, which are no problem for mplayer.
    Very new versions of FFmpeg have native amr-nb support. I'm not sure if it happened before or after the most recent FFmpeg bump in the repos.

  • How to make photoshop cs4 open dng files?

    How to make photoshop cs4 open dng files?

    They are opened by Photoshop through the ACR plug-in you should make sure the ACR 5.7 update is installed for your CS4.
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows

  • How to make Finder NOT to show files from a specific folder in "All My Files"?

    Hello!
    Can someone please advice how to make finder NOT to show files from a specific folder in "All My Files"? See the attach - I recently installed Civilization 5 from Steam and now I have a lot of unneeded files (*.log and *.ini) shown in  All My Files colder in Finder.
    I don't want to see them. Any advise?

    Using "All my Files" was very handy before all this rubbish popped up. =(

  • How to increase page size for balance file upload in Workspace.

    Hi All,
    Please suggest how to increase page size for balance file upload in shared Workspace pages.
    Thanks,

    A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

  • How to make a form for input in web interface builder

    Hi expert:
        How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to  draw lines and checkboxes . Thanks in advance.
    Allen

    WAD:
    Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
    You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
    Query Designer:
    Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
    This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
    Srikant

  • Making Adobe 7.0.5 the default for .pdf files

    I was advised that the way to get Adobe 7.0.5 to be the default, instead of 5.0, was to delete the Adobe applications & files in my system, library, and user folders, including the 7.0.5 app. itself. Then, after everything relating to Adobe is gone, I should re-install 7.0.5 and it would become the default.
    I also heard that Spotlight won't find every Adobe component or extention, so I'd have to do a detailed search and delete each one that way.
    Does this sound right?
    Can't I just delete the 5.0 folder in the Applications (Mac OS 9) folder and have everthing associated with 5.0 gone? Isn't that the beauty of having a Mac?
    Thanks,
    Greg
    PowerBook G4 15"   Mac OS X (10.4.2)   1.5 GHz, 1.5 GB RAM

    Hi Greg
    You were poorly advised. Deleting Adobe apps is a headache and completely irrelevant when it comes to making an app the default for a file type.
    Control-click a .pdf file, choose Get Info. In the Info window click the Open With drop down list, choose the app you want, and then click Change All underneath it.
    That should do it. You might find that there is more than one type of .pdf file and you might need to perform this action again at some time, but this should do the job.
    And yes, you can just delete the Acrobat Reader 5.0 folder.
    Matthew Whiting

  • How to make a group for selectd Object javascript

    How to make a group for selectd Object javascript

    There is currently no native way to email groups from iPad.
    The only way to do this is if your recipients are already members a a distribution group controlled elsewhere such as a Google Group or an  Exchange Organisation, then you can email the distribution group address which will then in turn forward to the individual email address of the members.
    Does it have to be email as currently you would have to add each recipient to the email manually.
    iOS to my knowledge doesn't support contact groups in context other than organisation.

Maybe you are looking for