How to make quicktime h.264 movies repeat indefinitely on iPod third gen

I created some QT H.264 movies for my wife's 3rd generation iPod so that we could play them in our nursery. But they only play once -- I would like them to loop continuously on the iPod. The 3rd gen iPod has a repeat setting, but that only seems to apply to music. I thought that there was a QuickTime Pro export setting for "loop continuously," but I can't seem to find it.
Can anyone help me out here?

In iTunes add the movie to a playlist or create a playlist with the movie.
Sync the iPod.
Set the iPod to *repeat all*
In the video section select the video in the videoplaylist and play it. It repeats.
Message was edited by: Wyodor

Similar Messages

  • Importing a Quicktime H.264 movie into FCP and DVD SP

    Hi,
    I am curious why when I import a Quicktime H.264.MOV file into FCP it always makes me render (just the audio) when I place it on the timeline. Also when I try to import it into DVDSP it says that it is an incompatible file.
    I know its an odd question, so don't ask me why I am doing it backwards.
    Thanks to anyone that can help!
    Gary

    Hi David,
    Thanks for your help. These projects are legal video stuff and I usually pause every hour and a half for about 10 minutes. (so I can put each segment on separate DVDs) I am feeding a video signal into a stand alone DVD writer AND into my Mac (I need to make a redundant recordings in case anything goes wrong). The problem with my stand alone DVD writer is to put in accurate chapter markers is a pain. Also it has a rather bland DVD setup menu which looks poor. So basically I am trying to take a video source from my camera and have it do the compression on the fly. I want to write my DVD in DVDSP because it has a ton of formatting options, and chapter markers are much easier to place.
    Basically I am looking for the absolute quickest way to write a DVD without having to bring it into Compressor.
    Thanks again for your time!
    Gary

  • The document "BOULET PEANUT - OFF LINE 3-QuickTime H.264.mov" could not be opened. An unknown error occurred (-101)

    I turned on my mac this morning after using Qt all day yesterday with no problems
    I get this message
    The document “BOULET PEANUT - OFF LINE 3-QuickTime H.264.mov” could not be opened. An unknown error occurred (-101)
    Also QT will not play the audio of the files
    I'm on a mac pro, 10.7.4
    Everything updated
    Any know whats up and can help solve this, it seems to be a software related problem to QT 7 or X

    Exactly the same by my iMac.
    "The document ... could not be opened. An error occurred (-101)"
    I can play the same video with VLC player but not with QuickTime.
    QuickTime and iTune can not play anything at all.
    VLC Player however can play all medias without any problem.
    All my apps are uptodate.
    What could be the problem?

  • How to make QuickTime the default player again?

    How to make QuickTime the default player again?

    Two finger Click on the file and then select get info.
    It will open a window.
    Srcoll down to open with.
    Select Quicktime.
    Then select change all.
    After that, all MPEG 4 or the type of file that video is, will be defaultly opened by quicktime.
    Hope this helped!

  • How to make QuickTime "Always on Top"

    Was browsing the Discussions trying to figure out how to make QuickTime 7.1.3 "Always on Top" on Windows XP, but judging by the unresolved threads I gather Apple forgot to include that option.
    Anyway, I've just discovered a free download that allows you to get around this problem: HELDUP. It creates a tray icon that you can click and drag onto QT (or any open program) to make it topmost/always on top.
    http://www.download.com/HeldUp/3000-2340_4-8526498.html
      Windows XP  

    Thank you!!
    I can't believe that Apple would "forget" a stay on top of windows feature.
    It has been driving me mad.
    ...Apple, specifically, QT developers, are you listening?

  • Help!!! How to make quicktime plugin do not display on top of the web page?

    Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
    Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
    Anyone can helps me? Thanks in advance!!!
      Windows XP Pro  

    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    Check the docs. Trent is usually very thorough in his
    instructions.
    Hint: I haven't studied it but it probably involves modifying
    one of DW's
    built-in Behaviors.
    Walt
    "ducati1" <[email protected]> wrote in
    message
    news:gkb906$qrd$[email protected]..
    > Wow that DW extension is just what I needed.
    > Thanks..
    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    > I currently have the thumbnails set to insert the ALT
    text into a text box
    > on
    > mouse click.
    >

  • How can I remove the old apple id from my ipod 4rth gen to log in my new apple id ? (my old apple id keeps showing automatic I can't put my prefer new apple id)

    How can I remove the old apple id from my ipod 4rth gen to log in my new apple id ? (my old apple id keeps showing automatic I can't put my prefer new apple id)

    - Note that apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • How to make Quicktime 10.2 start to play automatically

    In Finder, I click on a movie and it open Quicktime but it never play until I click play button. How to make it automatically play?

    Hi William,
    Quicktime 10 is a component of Mountain Lion.
    You should see it in the Applications folder.  
    If not, do a search for Quicktime in Spotlight. 
    If you can't find it, you may need to reinstall Mountain Lion.
    OS X Mountain Lion: Erase and reinstall OS X
    I hope this information helps ....
    Have a great day!
    - Judy

  • AS2 How to make a button that moves every two seconds

    How can I make a button that moves every two seconds by itself in ActionScript2?
    At the moment, I have to use the on(press) command, but what I really need is for the button to be able to move randomly by itself every two seconds. For example:
    (insert the code here) {
         bc1._x = random(250)
         bc1._y = random(250)
    Thanks!

    You can use the setInterval function to have a function repeated for specific time intervals.  Here is a link to a tutorial that explains how to use it...
    http://www.republicofcode.com/tutorials/flash/setinterval/

  • How to make quicktime movie export interactive.

    I've keynote 09 presentation that has images and videos inserted into it. I need to share this people across on internet. I've created quicktime .mov file for this. My file size comes roughly around 500MB. Everything is fine, only problem I see is when I play quicktime file on my mac mini it is interactive, so I click on mouse and it moves to next text or next slide. Whereas same file when I run on my Windows 7 machine it just keeps flying thru it without any interaction from user. Same thing happesn when I try to play quicktime file uploaded on vimeo or smugmug.com, file just flies thru all slides without any user interaction.
    Is there a way where I can make my slideshow to be interactive ?
    thanks
    -mj

    The problem probably is because you are opening the QT movie with Windows Media Player
    Solution
    Download Quicktime player to your windows 7 PC
    Then right click the QT movie you made from keynote and select 'open with'
    Then select quicktime (the QT player downloaded)
    Hope that helps

  • How to make animated/moving picture movie

    I have Quicktime Pro and Im trying to make a simple JPEG or GIF image that consists of many images and creates a moving picture. If I create the image sequence using the pictures, how can I save it as a JPEG or GIF so that I can upload it to Myspace or something similar? Thanks!
    GC

    http://www.lemkesoft.com/

  • How to make quicktime vido visible by a PC under Windows

    HI,
    I made an internet page with a video with quicktime, but every PC's under Windows can't read it! This is the page:
    http://web.mac.com/jeantoinenorbert/iWeb/Jean-Antoine%20Norbert/Exposition%20Gal erie%20Claire%20de%20Villaret.html
    Is the solution on http://www.freevideocoding.com/ as said on http://alyeska.altervista.org/en/iWeb_Movies.html? Because I dont understand. The video I made is on my cumputer and isn't on idisk.So what to do? Someone tald me it could be a question of CODEC?
    Anyway Thank You Cédric for your website et salutation de Lausanne!

    Hi Jeannot,
    sorry I didn't notice that you are in iWeb '06... In iWeb '08 you just would have to add an html snippet and put the code in it. To add code in iWeb '06 you could use iWeb More http://iwebmore.ctrl-j.eu/Manual.html
    However I think there is no need to add code. I think the problem is that they don't have Quicktime installed which could be solved by having them installing quicktime thus providing a link to the download page http://www.apple.com/quicktime/download/ did you ask them if they have quicktime installed? Without having Quicktime they will not be able to play it...
    Unfortunately I don't have access to a PC...
    But actually QuickTimeKirk would be much better than me on that... I don't even see how a movie could play being on your computer and not on iDisk... Did you just drag&drop it? Actually it should be on the iDisk too...
    I live in Basel city, about 20 minutes by bus to the Fondation Beyeler which is a bit outside of town and which I really love. Also it's a great building made for the art and in a beautiful landscape... In a wonderful city too... (you might also visit the Kunstmuseum, which is even bigger than the Beyeler but missing the right 'entourage')
    Salutations,
    Cédric

  • How to make ns:Image tile or repeat?

    How can one make the ns:Image be tileable or have it repeat over and over again in the area provided?

    So I have devised a not so clever way to do this but I haven't worked out all the kinks yet and I need help from all of you
    Here's the plan:
    1) Have a DataGroup inside the are where you want to tile an ns:Image
    2) Enable theclipAndEnableScrolling on the DataGroup
    3) Feed a dynamically generated ArrayCollection which has a reference to the same image repeated enough times so as to cause a horizontal and vertical overflow.
    4) Apply a TileLayout to the DataGroup
    5) And hopefully we get something that tile dynamically loaded images.
    The problem right now is that I also need to set the requestedColumnCount on TileLayout to make sure that I ask it to show more columns than it respectably can, therefore, causing the clipping to happen horizontally (vertically is already working) for the tiled image as well.
    a) Setting requestedColumnCount="2" (static binding) works but I don't want to hardcode that as it may be a diff # for diff size images.
    b) So I have requestedColumnCount="{(dataGroup.width / image1.width) + 1}" but even though I can see the dynamically calculated number "2" being  being set on TileLayout.as when I step through it in debug mode ... it doesn't have the same effect as the static binding any ideas?
    Here's the unfinished and rather hard-coded proof-of-concept source:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application
        xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/halo"
        height="100%"
        xmlns:ns="library://ns.adobe.com/flex/mx">
        <s:HGroup height="100%">
            <s:DataGroup
                id="dataGroup"
                width="700"
                height="140"
                clipAndEnableScrolling="true"
                >
                <s:ArrayCollection id="images">
                    <!-- 502 x 72 image-->
                    <ns:Image id="image1" source="images/top_banner.png" scaleContent="false"/>
                    <ns:Image source="images/top_banner.png" scaleContent="false"/>
                    <ns:Image source="images/top_banner.png" scaleContent="false"/>
                    <ns:Image source="images/top_banner.png" scaleContent="false"/>
                </s:ArrayCollection>
                <s:layout>
                    <!--<s:TileLayout verticalGap="0" horizontalGap="0" requestedColumnCount="2"/>-->
                    <s:TileLayout
                        id="tileLayout"
                        verticalGap="0"
                        horizontalGap="0"
                        requestedColumnCount="{(dataGroup.width / image1.width) + 1}"
                    />
                </s:layout>
            </s:DataGroup>
            <s:Label text="{(dataGroup.width / image1.width) + 1}" />
        </s:HGroup>
    </s:Application>

  • How to make small text and move it down ?

    hi,
    how can I move text down and little like in this picture using Pages ?
    http://dl.getdropbox.com/u/72686/below.png
    I don't know how to define it in english, sorry... how do you define it ?
    thanks

    If I understand correctly what you mean select text, FORMAT then FONT then BASELINE then choose SUBSCRIPT or SUPERSCRIPT.

  • How to make ITunes silent during movie pause?

    I just recently updated to Lion, and to ITunes 10.4.1.  There's an annoying "new" feature.
    In old versions, when you paused the movie, you would hear silence.
    Now, in this version, when I pause, I hear noise.  E.g., for Inglourious Basterds, I hear the piano theme music;  for Star Trek, I hear the sounds of the bridge (hums, beeps, etc.).
    I don't like this new feature, because if I pause a movie and want to say, surf the web or run other apps, I *don't* want this annoying background track.  I know I can just hit "mute" inside the ITunes movie window... but really... that is an extra step.  Shouldn't there be a way to disable this "feature"? 
    Any advice would be most appreciated.

    Is this an iTunes movie purchase or something you added yourself?
    Is it an iTunes Extra movie?
    jerru wrote:
    Hmm.  Thanks for responding, Chris CA, but the stock answer of "update your software" (equivalent to tech support's stock, "try rebooting" answer) is not going to help. 
    It's not the equivelant at all and it was not simply a stock answer.
    You said you "just recently updated" yet you are running old iTunes software on an old OS.
    Shouldn't there be a way to disable this "feature"?
    If this was a feature of iTunes, then maybe yes. However, as noted, I have never heard of this and it is not a "feature" of 10.5.2 (nor any other version as far as I can tell).

Maybe you are looking for