How to make RAID1 of two 750GB HDDs with 945P NEO3-F

I have a PC with this MSI 945P NEO3-F MB and currently two new 750 GB Samsung SATA2 drives in it. The MB is some 18 months old but I just got the two HDDs today.
What I would like to do is set these two HDDs in RAID1 so that I wouldn't loose any data if one of the disks break.
Does this motherboard and it's BIOS support RAID? I thought I had verified that from the internet before I went to the computer store today, but now I'm not so sure anymore. Firstly I can't find any settings in BIOS for that and secondly I've been going through MSI pages again, and I cannot see any mention of RAID... I must have unintentionally looked at some other MBs data earlier today.
Well, if this MB and the BIOS do not support RAID, what can I do? What other hardware (or software) do I need to accomplish that.
My set:
MSI 945P NEO3-F
Proc: Intel core 2 duo E6400 2.13 GHz/2MB
RAM: 2 x 1GB DDRII 533 MHz
HDDs: 2 x Samsung 750GB FI SATA2 3 (HD753LJ)
OSs: Currently only WinXP Home, but will install (and mainly use) Mandriva 2008.1 Linux
I would appreciate any suggestions; thanks.

The Intel ICH7 Southbridge, which is used on your board, does not support RAID.
Quote
Well, if this MB and the BIOS do not support RAID, what can I do? What other hardware (or software) do I need to accomplish that.

Similar Messages

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

How to insert data into two tables linke with foreign key..

I have two tables
1)EMP(emp_ID,username,emp_type_code)
emp_ID is primary key, emp_type_code is a foreign key references emptype table.
2)emptype(emp_type_code,emp_type_descripton)
emp_type_code is primary key
Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..

CREATE TABLE "CATDB"."DWDIMUSER"
"USER_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_ID" NUMBER(10,0),
"FULLNAME" VARCHAR2(20 BYTE),
"FNAME" VARCHAR2(20 BYTE),
"LNAME" VARCHAR2(20 BYTE),
"USER_SUBTYPE" VARCHAR2(20 BYTE),
CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
CREATE TABLE "CATDB"."DIMSPECIALTY"
"SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_NAME" VARCHAR2(100 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
SELECT DISTINCT
Engineer AS FullName,
regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
'Engineer'
FROM EMPLOYEELOOKUP;
INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
SELECT DISTINCT SPECIALITY
FROM EMPLOYEELOOKUP;
COMMIT;
CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
"EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
"ENGINEER" VARCHAR2(25 BYTE),
"SPECIALTY" VARCHAR2(20 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
DATA IN EMPLOYEELOOKUP
Engineer, Specialty,
John, Dow, Electronis,
Dow, Jons, Technician
Stan Smithers Sales
Mark, Richards Marketing
Jenny, Lane Marketing
John, Lee Sales
I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY.

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit

How to make project across two DVDs with one DVD menu

Hi!
I’m working on a large project (3 hours of video with about 10 chapters, over 50 pictures in a playlist, and special feature chapter) and wondering is it possible to make an project across 2 or more DVDs, but to have menu only on first one? I’d like to make an project that comes with menu only on first DVD and when you click on e.g. “special features” button, then you get the message “please insert DVD 2″
Is it possible and how to make something like that?
Thank you!

I would have EACH DVD begin with a menu. Somebody will insert DVD 2 first no matter how you label things.
Yes, you are right! People just don't want to read, but I'm making an animated menu in AE and it'll take about 300MB (rendered in .mpg). That is what I want to avoid on other DVDs to save some space. You just gave me an idea so I'll make some small menu for other one or two DVDs with just a few informations about what DVD is inserted and what DVD you need to insert if you want to watch something else from that project. Thank you!
I just have to learn better Encore and its capabilities and limitations (if I have time )

How to make Vista partition on the HDD as first one with Recovery CD

Hello,
i want to format and recover the information to my "Vista" (C://) partition, which is the first. But when i choose the option "Format and recover to an existing first partition on your hard disk(without RE)" the computer began to recover to "Partition Type: windows NT NTFS (ID: 07)" which size is only 1.50 GB.
In the middle of the process it shows "not enough space on a disk"
Question: how to make "vista" partition the first one? What is "the first partition" in the second option of formating and recovering the system?
Thank You for Your answers

Hi
You can obtain from your friends (I am sure someone has it) Microsoft WXP installations CD and install OS on C partition. On Toshiba download page you will find chipset and all necessary drivers to make WXP running properly. When finished connect external HDD or USB memory stick and copy all your data there. you can also install Nero demo version and create data CD or DVD. It is lot of work but if you have time you can do this without any problems.
Other way connect your HDD as external one to other PC and copy all your important data. Sorry but I do not see other solution.

How to: make one or two partions at a raid system?

Hey
how can i make one or more a partions at a raid system?
i will make the partions at a 250gb raid. one with 120gb for the bootsector, and the other for documents, etc.
is there a hwo to anywhere? dont find one?
please read my second question.... 2 raids at one mac pro?
regarads

O.K., i was looking the hole day to get that partions on a raid working.
to make the partions on each HD with the same volume, this is no problem. when you then create the first raid, works fine. but when you make the second raid, you get a massage, that this raid is not found.
then you see both raids at the disc utilty, but only at the first you seen the volumen down under, by the second not. the first works, the second is not avabiele.
so, now i have only one big mirrowed raid for my boot sector, and its runs fast, quick and without big noise... thats what i want, and the second big raid for my files.
2 raids at one mac pro with 4 hd. one with 2 x 250 gb hd for the bootsector, and the other with 2 x 500gb for files
thx to all, and you kappy
regards

How to make dbca see two instance?

Hi,
I have 2 Oracle 10gr2 instances running in one Linux AS4 machine, both started.
Now I want to create 2 templet for 2 database using dbca, but from dbca I can see only one instance, How to make dbca see both?
Thanks.

Are both instances listed in your /etc/oratab file?

HT2801 How to make external "SuperDrive" work on iMac with failed built-in?

WHY is my new external "SuperDrive" "designed exclusively for use with Mac computers that do not have a built-in optical drive"? How can I make it work on my iMac with a failed built-in "SuperDrive" that was obviously junk to begin with? I ordered it from a Staples kiosk that had zero product information but the name of the product was USB SuperDrive and it was made by Apple so I reasoned it would run on my Apple. I bought an LG 2 months ago when the built-in failed but the LG only worked about a month then every disc burn was aborted as "error." So I bought new burn software from the Apple app store but still "error" so I went to Staples and bought this and it didn't work so I ise a magnifying glass to read the light grey letters on the white box and it says "Compatible with Mac systems without a built-in optical drive." I found articles online advising how to hack my own computer to make this work but I am low-tech and afraid of wrecking my computer. I am FURIOUS with Apple, I buy it only because Windows gave me such grief but honestly Apple hardware has OFTEN proven itself short-lived and low quality. PLEASE how do I burn an audio CD with my stupid iMac peice of garbage?

Calm down.
If you so choose here are some quality optical drives you can purchase, online here.
http://eshop.macsales.com/item/OWC/VLU2SD24XS/
http://eshop.macsales.com/item/OWC/MR3F82SD24S/
For Mac burning software, you can purchase and use Roxio Toast.
http://www.roxio.com/
OR you can try this freeware software called simply Burn.
http://burn-osx.sourceforge.net/Pages/English/home.html

How to make the Printer deskjet 3940 compatible with Windows 7, home basic, 32 bits?

I have HP Deskjet 3940 Printer. I recently purchased a Lenovo desktop( C320, 57-302429) which has Windows 7,home basic,32 bits operating system. The said printer does not work with the above computer. Please guide how to make this printer compatible with the above operating system.
This question was solved.
View Solution.

1. Click the Start button, click Control Panel and double click Devices and Printers.
2. Click Add a Printer.
3. Select Add a local printer.
4. Choose an existing USBx Local port, click Next.
5. Click the Windows Update button.
6. After the update finishes, search for the 3940 driver.
7. click Next,Next,Next,Next,Finish
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How to install 10.5 if erased HDD with 10.4?

I wanted to install 10.4 fresh so I erased the HDD with a program I use on my PC all the time to do fresh installs of XP (formats the drive). I stupidly thought the 10.4 disk that came with my mac was a full install. I soon found out that wasn't true. I decided to go buy 10.5 not just for the upgrade but to have a disc to use if I ever needed to reinstall the OS. Well, turns out that doesn't want to install either. The only thing that happens when I put it in is a screen comes up saying there's no bootable device or CD and to press any key when there is one. Pressing anything on the computer doesn't work. I now realize that it's not a full version like I thought it was (I asked the guy at the counter if it would install without 10.4 and he said yes. Now I can't return it because it's software).
Can anyone give me any advice on what to do? I don't have another mac or an iPod so any ideas with those are out of the question. Thanks for reading.

Welcome to the Forum!
It sounds like you bought an upgrade version of Leopard rather than the standard installation disc. Yet, the guy at the counter led you to believe it was the latter. If that has turned out not to be the case take it back and get him to confirm that you have purchased on his advice the wrong disc for your system. I am surprised though as there should be a clear distinction between upgrade and install discs.

How to make the active save-to-file with the data from GPIB ?

Hello,,everybody !!
I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
Thank you in advance for anybody's help !!

Thanks Dennis,
I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
16:40:33 54.24
16:40:34 54.23
16:40:35 54.24
I want to get rid of the blank line in between.. Do you have the idea about it ?

Anybody know how to make the upgrade kit remote work with Vi

I have a X-Fi extreme music & an upgrade kit.{ remote & receiver} The remote will allow me to select music tracks under the the entertainment center, but will not control the volume. I can push +-or - volume all day long, but it always says 00% and dosn't change in intensity. Any Ideas?

Hi
I take it you have used the youp-pax software? If not, then do so. Install revision 2. I did this and my remote is fully working once more.
Must admit I am a little annoyed creative did not provide a link to youp-pax for people wanting to update their drivers. They could have said it was use at your own risk etc, but instead I had to waste two weeks fiddling with vista until I discovered it.
/rant off

How to make RAID1 of two 750GB HDDs with 945P NEO3-F

Similar Messages

Maybe you are looking for