How to make report footer at bottom of a page

Hi all,
in my report footer section, I insert a sub report as summary for my main report, even I set  "print at bottom"  by section expert, the position of report footer is sometime at top when the current page is empty, and sometime at bottom when the current page has content.
Thank you very much
Clara

Hi Clara, 
If Crystal thinks the subreport is too large to show the subreport's first page on the current page it will force the subreport onto the next page. 
Same as how inserting an image or tablle in Word, if Word cannot fit this object on the current page it will insert a page break and start the object on the new one. 
Best suggestion is to remove as much unused sections and lines from the subreport.  Remove the Report Header and footer if the subreport is not using them.  In the main report, try to minimize the Page header and footer to free up more space on the page. 
Good luck,
Brian

Similar Messages

  • How to make report high 3.33 inch per page(11g report)

    Dear all,
    How to make report high 3.33 inch per page
    so if there are more than one page in the report it will start printing in the correct position on the next page,
    i make generate to PDF then print
    Thanks,
    Sakr

    Hello Sakr,
    This is a good question:
    You can visualize:
    http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp
    You can change Height that shows 11 in the visual aid.
    Mark Correct or Helpful !
    Edited by: New Yorker on Aug 26, 2011 11:40 AM

  • Printing report footer at bottom of last page

    I have a problem with a report I am trying to rebuild - the report is the AR invoice, and requires a footer to be printed at the bottom of the last page. I can get it to come out on the last page, but not anchored to the bottom of it.
    The previous version worked by using a format trigger on the footer and running the report twice, first time poplating a table with page numbers and then second time printing on the last page. This is horribly inefficient and time consuming.
    Is there any way to get this to work in a single pass of the report?

    Hello,
    If you have access to metalink, you can use the example in the note :
    Note.253881.1 How to Create a Report with a Frame Only on the Last Page at a Fixed Position:
    Regards

  • How to make report with access 2010 from SharePoint Discussion lists 2013

    HI,
    I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
    but instead it is shown as a separate entry in the database.
    Anyone can please help?
    SAN
    Santhiya
    Santhiya

    Hi Santhiya,
    I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
    http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to make reports on FI Line items

    Hi all,
    Let me know  how to make reports on FI Line items especially drill down reports. suggest me steps for developing reports through Bex query designer. Am new in reporting on FI. How to make the drilldown reports. Plz let me know step by step.
    Thanks,
    Jack

    Hi
    Follw the steps
    Step1
    Lets take an example of ODS Accounts Payable: Line Items  Technical Name: 0FIAP_O03
    install all this 0FIAP_O03  ODS from the Business content.
    For more details on FI Line item ODS
    http://help.sap.com/saphelp_nw04/helpdata/EN/af/16533bbb15b762e10000000a114084/frameset.htm
    Step2
    After installing make sure that all the infoobjects and transfer rules and update rules are in active state
    Step3
    Now type the transaction code RRMX , you will get into the query designer
    Step4
    Select the Infoprovider from the above example 0FIAP_O03 . now you will arrive to the screen where you can see Rows and colums
    Step5
    Drag and drop the  characteristic infoobject in to the row which is necesseayfor the report output
    Step6
    Drag and drop the  Keyfigure infoobject into the column which is necesseayfor the report output
    Step7
    Now under Free characteristics draga and drop the charactor infoobject which you need to navigate in the reporting.
    Note: Before dragging the objects in the freecharacteristic make sure that you need to check the navigation in the ODS level
    Step8
    Now save the report , when you save give the technical name of the report and save
    now execute the report
    Santosh
    Edited by: Santhosh Nagaraj on Nov 15, 2009 1:35 AM

  • Report Footer Appears in Middle of page

    My report has 4 page footers.  The Report Footer appears on the last page - but in the middle of page about the page footer.  I would like it at the bottom.  All help is welcomed.  Thank you!

    As per crystal design the report footer will be printed before page footer. So Try inserting one more page footer at last and move the objects from report footer to page footer and use the suppress condition for the last page footer section like this
    not onlastrecord
    Hope this helps!
    Raghavendra

  • I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu.  I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle.  Is there a way to do this?

    I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu.  I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle.  Is there a way to do this?

    There are different templates for iPhoto books and they differ from version of iPhoto to iPhoto, so explore the other options.

  • How to make session invalid when user refresh the page?

    How to make session invalid when user refresh the page?

    I have a <form> in a JSP file that has another JSP file as an action.
    I have main.jsp that has <form> with action.jsp file as an action.
    Now when I submit the <form>, request forwarded to action.jsp and it will take the action. But this file is taking so long, hence user refresh the page again and again, hence duplicate request processing is occuring.
    I want to prevent this.

  • How we can use footer window in a last page?

    I m making SAP SCRIPT..
    How we can use footer window in a last page?

    Hi vikas,
    is it that you want to use footer window to be printed in last page...then do like this,
    command to be used:
    /: IF &NEXTPAGE& EQ 0
    whatever footer you want.
    /: ENDIF
    and go thru the link and revert back if any quiries r present..
    http://sapscriptcode.blogspot.com/2007/05/print-footer-notes-only-on-last-page.html
    pls reward if helps,
    regards.

  • How to make Reports 9i display Danish national characters?

    I am running Oracle9i Reports and cannot make Reports print the Danish national characters f, F, x, X, e and E. I have a development machine with Developer Suite 9.0.2, where I can run the report in Paper Design, where the characters displays correctly, but as soon as they are uploaded to the Application Server (9.0.2), all of the national characters are replaced with some very mysterious characters. The dev. machine and the Oracle9iAS machine both connect to the same database, and when I make a boilerplate object just containing "FXE", the problem is still there, so it does not seem to be a database issue.
    I read some articles on MetaLink about adding some lines in uifont.ali, but they do not seem to apply, since the article only mention East-European languages (Polish and Czech). The font used is Times New Roman. The dev. machine has NLS_LANG set to AMERICAN_AMERICA.WE8MSWIN1252, and the Oracle9iAS machine is running DANISH_DENMARK.WE8MSWIN1252 - ie. the same character set. I tried to generate the report both to HTML and PDF, but that did not make any difference regarding this issue.
    How do I make Oracle9i Reports Services display the Danish national characters correctly?
    Thanks in advance!

    Thanks for your suggestions.
    However, here's what I've done, and it did not make any difference.
    1. Changed the NLS_LANG parameter to match on both server and dev. machine and recompiled and saved the RDF - no difference.
    2. Installed the same model printer on the server, as the one on the development machine, and rebooted the server - no difference.
    3. Checked uifont.ali on both systems - they're exactly the same...
    What else might be causing this?

  • How to make report for last 24 hours?

    Hello,
    I have a little problem, I can't make report for last 24 hours.
    Example:
    If I am running report on 2.1.06 at 14:00, I want to get results from 1.1.06 14:00 to 2.1.06 14:00.
    How do i make a report with this selection?
    Because,if I choose date from 1.1.06 to 2.1.06 and
    hour 14:00 to 14:00, I will only get results on 1st and 2nd on 14:00.
    If I choose 1.1.06 and 2.1.06, 14:00 to 24:00, I won't get results for 2.1.06 from 0:00 to 14:00.
    Because all selections use AND to get results.
    How can I choose that system compare selections with OR?
    How can I get results for last 24 hours?
    Best regards,
    Uros

    Hi,
    define a structure in your query with two entries. First one with 1.1. and > 14:00 and second one with 2.2. and < 14:00. Perhaps you need to fill the structure by user exits.
    Hope it helps,
    Leo

  • How to make report output non editable

    Hi can any body give me sample code on how to make the report output non editable.
    thanks in advance
    kp

    Hi
    What are you meaning?
    U don't want to allow to change the data in the selection-screen?
    If it's so:
    AT SELECTION-SCREEN OUTPUT.
       LOOP AT SCREEN.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
      ENDLOOP.
    If you need to change only certain fields:
    PARAMETERS: P1 ......,
                P2 ...... MODIF ID AAA.
    SELECT-OPTIONS: SO_1 FOR .....,
                    SO_2 FOR ..... MODIF ID AAA.
    AT SELECTION-SCREEN OUTPUT.
       LOOP AT SCREEN.
          CHECK SCREEN-GROUP1 = 'AAA'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
      ENDLOOP.
    Max

  • How to make reports based on Data block work on web?

    I am using form 6i and oracle 9ias
    I have successfully call the common reports from the form on the web using run_report_object, then web.show_documnet(..);
    But when it come to the reports based on the data block from the form, it doesn't work. it always fetch all the records from the table which the data block is based
    Anyone can tell me how to make that work?
    thanks

    I have successfully do this when I am running forms and >reports in localhostTell me how did you achieve this?
    Did you have both Reports and Forms running under same oracle home?
    and off course was it a clinet server architecture?
    What version for Form and Reports did you use?
    Which executables did you use and what was your call from forms? When you call from Forms, which Reports executable use to run the report?
    The data integration can only be achive if both the product were running under same Oracle home and were in client server architecture. I do not think data integration is possible in web architecture.
    Thanks
    Rohit (Orcale Reports Team)

  • How to make report that contains only summaries?

    How to make a report in Designer/2000 that shows only summary fields? For example something like:
    select count(*) from emp;
    null

    How to make a report in Designer/2000 that shows only summary fields? For example something like:
    select count(*) from emp;
    null

  • How to make an anchor link also refresh the page?

    I'm trying some new things with some widgets (compositions) and I'd like to make certain anchor links also refresh my page (on the mobile version of my website). I tried putting the entire link in instead of just selecting my anchor (.com/mypage#myanchor) but that only works the first time (maybe because the user already is on .com/mypage#myanchor ?)
    A bit of Googling found me a way to do this:
    window.location.href = 'mypagetoreload.htm#jumptosection1';
    window.location.reload(true);
    but I don't know how to use this in Muse..
    Thanks in advance!

    Im experimenting with some different versions of a mobile version of my website. In this one I'm trying to put all content (everything except the header and footer) in a composition slideshow. I made the triggers invisible and placed them over my menu buttons in the header, so that the content scrolls horizontally. I like this because people only need to load 1 page (my mobile version only has about 6 pages) and they can also swipe between content, like my product pages.
    This all worked out fine, but now every "page" is the same length (because in reality its just one page with a slideshow on it). So now I had to add content to some pages (like home and about us) to kinda fill all space (the pages with my products on it have alot more content). I decided to put pages together, like put "about us" on the same page as "home". I made an anchor and linked to that anchor with my "about us" menu button. But, as "about us" is on slide 1 with home, the slideshow must also reset when people click it (otherwise you would only scroll down on the wrong slide). If I make my website refresh the slideshow resets (it would also work if i open the link in a new window, but that'd be very annoying).
    English isn't my first language, please excuse my bad grammer.
    Thanks in advance!

Maybe you are looking for