How to make report that contains only summaries?

How to make a report in Designer/2000 that shows only summary fields? For example something like:
select count(*) from emp;
null

How to make a report in Designer/2000 that shows only summary fields? For example something like:
select count(*) from emp;
null

Similar Messages

  • How to make report with access 2010 from SharePoint Discussion lists 2013

    HI,
    I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
    but instead it is shown as a separate entry in the database.
    Anyone can please help?
    SAN
    Santhiya
    Santhiya

    Hi Santhiya,
    I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
    http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to make reports on FI Line items

    Hi all,
    Let me know  how to make reports on FI Line items especially drill down reports. suggest me steps for developing reports through Bex query designer. Am new in reporting on FI. How to make the drilldown reports. Plz let me know step by step.
    Thanks,
    Jack

    Hi
    Follw the steps
    Step1
    Lets take an example of ODS Accounts Payable: Line Items  Technical Name: 0FIAP_O03
    install all this 0FIAP_O03  ODS from the Business content.
    For more details on FI Line item ODS
    http://help.sap.com/saphelp_nw04/helpdata/EN/af/16533bbb15b762e10000000a114084/frameset.htm
    Step2
    After installing make sure that all the infoobjects and transfer rules and update rules are in active state
    Step3
    Now type the transaction code RRMX , you will get into the query designer
    Step4
    Select the Infoprovider from the above example 0FIAP_O03 . now you will arrive to the screen where you can see Rows and colums
    Step5
    Drag and drop the  characteristic infoobject in to the row which is necesseayfor the report output
    Step6
    Drag and drop the  Keyfigure infoobject into the column which is necesseayfor the report output
    Step7
    Now under Free characteristics draga and drop the charactor infoobject which you need to navigate in the reporting.
    Note: Before dragging the objects in the freecharacteristic make sure that you need to check the navigation in the ODS level
    Step8
    Now save the report , when you save give the technical name of the report and save
    now execute the report
    Santosh
    Edited by: Santhosh Nagaraj on Nov 15, 2009 1:35 AM

  • How to make table that will include controls such as drop list?

    How to make table that will include controls such as drop list?
    I need to create table as Property Browser of ActiveX, that include rows with differnt types such as drop list, color, ...

    Hi Nadav,
    I figured out where I missed your point. When you wrote
    table as Property Browser of ActiveX, that include rows with differnt types such as drop list, color, ...
    I was thinking mixed data-types in a [2d] table!
    Looking at the property browser again it looks like no single LV function can do all of that. It can be developed as a pop-up (like the browser is set-up) and then code all of the elegance using an event structure to control the background color of a string indicator while controling the visability of rings that are only made visable when a mouse down is detected. That will get you pretty close.
    So no, my previous response ws not correct for what you are trying to do if you want to duplicate all of the wistles and bells of the property browser pop-up window.
    Please forgive my distraction.
    Ben 
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to make report high 3.33 inch per page(11g report)

    Dear all,
    How to make report high 3.33 inch per page
    so if there are more than one page in the report it will start printing in the correct position on the next page,
    i make generate to PDF then print
    Thanks,
    Sakr

    Hello Sakr,
    This is a good question:
    You can visualize:
    http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp
    You can change Height that shows 11 in the visual aid.
    Mark Correct or Helpful !
    Edited by: New Yorker on Aug 26, 2011 11:40 AM

  • HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

  • All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

    All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

    Hi Ulfsch,
    Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
    1) Right click on any of the PDF file and choose the option open with
    2) Select choose default program
    3) Select Adobe Reader/Acrobat from the list
    5) Check the box "always open this type of file with selected program" (not the exact same wording)
    6) Click OK
    If you are on Mac, CTRL+Click on the file.
    Go to Get info
    Go to Open with
    Change it to Adobe Reader/Acrobat and click change all.
    Thanks,
    Vikrantt Singh

  • How can one accept that the only way to sync with OSX 10.9 is through I cloud?

    How can one accept that the only way to sync with OSX 10.9 is through I cloud?
    One is now obliged to send private information to an external server...

    Thank you for the link but what a waist of time.
    Who is the idiot that decided to drop manual syncing of contacts and calendars?
    I am on the point of dropping all APPLE machines!
    I am looking to sync without having to worry about security issues, keeping my files and passwords locally on my machines, and not an external server such as a cloud drive.
    Do you know if Outlook syncs also over an external server?
    Do you know of this solution? http://www.codetwo.com/public-folders/share-windows-files-securely/

  • How to check postal code contains only 0 to 9

    Hi all,
    How to check postal code contains only 0 to 9
    thank you

    Hi
    Check the below link.It may help you out.
    http://help.sap.com/saphelp_47x200/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
    Cheers,
    Hakim
    mark all useful answers

  • How to make sure that schema name is not included with generated sqls

    How to make sure that schema name is not included with generated sqls with tableadapter wizard.
    What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
    I want
    "Select a,b from t1" ,not "select "a","b" from schema.t1"
    Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
    . I now manually edit XML files of dataset. It works but....
    thanks

    The full hardware :
    Processor Intel core due 3.00 MHz
    RAM:1.5GB
    psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
    HD Disk:160 GB
    But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

  • Need a parked/blocked report that contains both the FI and MM number for ea

    Hi Guys,
    Business need a report which contains the translation of 'MM' numbers (typically beginning with '51') assigned for parked PO invoices vs. the 'FI' document number that comes out in the parked report. 
    Ideally, business need a parked/blocked report that contains both the FI and MM number for each record.
    Can someone help me pull this report from MM
    Thanks and Regards,
    Habeeb

    Hello Habeeb,
    Check out the report MR43 which gives information about Parked invoice. Also you can have a look on MIR6 with check box Parked Innvoice.
    The main table for parking invoice is VBKPF and other relevent tables are as follow:
    VBKPF                          Document Header for Document Parking
    VBSEC                          Document Parking One-Time Data Document Segment
    VBSEGA                         Document Segment for Assets Document Parking
    VBSEGD                         Document Segment for Customer Document Parking
    VBSEGK                         Document Segment for Vendor Document Parking
    VBSEGS                         Document Segment for G/L Accounts Document Parking
    VBSET                          Document Segment for Taxes Document Parking
    Hope this helps.
    Regards
    Arif Mansuri

  • How to make Reports 9i display Danish national characters?

    I am running Oracle9i Reports and cannot make Reports print the Danish national characters f, F, x, X, e and E. I have a development machine with Developer Suite 9.0.2, where I can run the report in Paper Design, where the characters displays correctly, but as soon as they are uploaded to the Application Server (9.0.2), all of the national characters are replaced with some very mysterious characters. The dev. machine and the Oracle9iAS machine both connect to the same database, and when I make a boilerplate object just containing "FXE", the problem is still there, so it does not seem to be a database issue.
    I read some articles on MetaLink about adding some lines in uifont.ali, but they do not seem to apply, since the article only mention East-European languages (Polish and Czech). The font used is Times New Roman. The dev. machine has NLS_LANG set to AMERICAN_AMERICA.WE8MSWIN1252, and the Oracle9iAS machine is running DANISH_DENMARK.WE8MSWIN1252 - ie. the same character set. I tried to generate the report both to HTML and PDF, but that did not make any difference regarding this issue.
    How do I make Oracle9i Reports Services display the Danish national characters correctly?
    Thanks in advance!

    Thanks for your suggestions.
    However, here's what I've done, and it did not make any difference.
    1. Changed the NLS_LANG parameter to match on both server and dev. machine and recompiled and saved the RDF - no difference.
    2. Installed the same model printer on the server, as the one on the development machine, and rebooted the server - no difference.
    3. Checked uifont.ali on both systems - they're exactly the same...
    What else might be causing this?

  • HOW TO MAKE FIELDS AS READ ONLY IN TABLE MAINTAINANCE

    HI ABAPers,
    HOW TO MAKE SOME FIELDS AS DISPLAY MODE.
    FOR SUPPOSE, THERE ARE 5 FIELDS in SM30.
    AMONG THEM 1 FIELD SHUD BE USED FOR EDITING AND THE OTHER 4 FIELDS SHUD ONLY BE USED FOR DISPLAY PURPOSE
    WHEN EVER I ENTER A VALUE IN THAT 1 PARTICULAR FIELD THEN THE DATA OF THE REMAINING 4 FIELDS SHUD BE DISPLAYED IN THE SAME SCREEN ITSELF.
    HOW CAN IT BE POSSIBLE...
    PLZ HELP.
    THNX IN ADV,
    SP.

    Hello SP,
    You can create a maintenance view for the table & here you can define the maintenance attribute for individual fields.
    For the fields you want to be READ-ONLY pass 'R' to those fields. (It is the 4th column from the left, the one to the immediate left of the Key column).
    Don't change the TMG function group directly. If you regenerate the TMG the changes would be overwritten !
    You can use the Event '01' to fulfill your requirement:
    *&      Form  f_event_01
    *       text
    FORM f_event_01.
      DATA: v_indx TYPE sy-index,
            v_land1 TYPE land1,
            v_name1 TYPE name1.
      FIELD-SYMBOLS: <vendor> TYPE lifnr,
                     <val> TYPE ANY.
      BREAK-POINT.
      "TOTAL contains all data which are read, changed and created in TMG
      LOOP AT total.
        IF <action> = neuer_eintrag " New Entry.
        OR <action> = aendern "Changed entry
        OR <action> = original. "Same as DB
          READ TABLE extract WITH KEY <vim_xtotal_key>.
          IF sy-subrc = 0.
            v_indx = sy-tabix.
          ELSE.
            CLEAR v_indx.
          ENDIF.
          ASSIGN COMPONENT 'LIFNR' OF STRUCTURE total TO <vendor>.
          CHECK sy-subrc = 0.
    *     select data from the LFA1 based on LIFNR
          SELECT SINGLE name1 land1 FROM lfa1
            INTO (v_name1,v_land1)
            WHERE lifnr = <vendor>.
          CHECK sy-subrc = 0.
    *     Populate the hidden fields NAME1 & LAND1
          ASSIGN COMPONENT 'NAME1' OF STRUCTURE total TO <val>.
          CHECK sy-subrc = 0.
          <val> = v_name1.
          ASSIGN COMPONENT 'LAND1' OF STRUCTURE total TO <val>.
          CHECK sy-subrc = 0.
          <val> = v_land1.
          MODIFY total.
          CHECK v_indx GT 0.
          extract = total. "Pass the changes in TOTAL to EXTRACT
          MODIFY extract INDEX v_indx.
        ENDIF.
      ENDLOOP.
      sy-subrc = 0.
    ENDFORM.                                                    "f_event_01
    BR,
    Suhas
    Edited by: Suhas Saha on Aug 16, 2010 11:58 AM

  • How to make report for last 24 hours?

    Hello,
    I have a little problem, I can't make report for last 24 hours.
    Example:
    If I am running report on 2.1.06 at 14:00, I want to get results from 1.1.06 14:00 to 2.1.06 14:00.
    How do i make a report with this selection?
    Because,if I choose date from 1.1.06 to 2.1.06 and
    hour 14:00 to 14:00, I will only get results on 1st and 2nd on 14:00.
    If I choose 1.1.06 and 2.1.06, 14:00 to 24:00, I won't get results for 2.1.06 from 0:00 to 14:00.
    Because all selections use AND to get results.
    How can I choose that system compare selections with OR?
    How can I get results for last 24 hours?
    Best regards,
    Uros

    Hi,
    define a structure in your query with two entries. First one with 1.1. and > 14:00 and second one with 2.2. and < 14:00. Perhaps you need to fill the structure by user exits.
    Hope it helps,
    Leo

  • How to make reports based on Data block work on web?

    I am using form 6i and oracle 9ias
    I have successfully call the common reports from the form on the web using run_report_object, then web.show_documnet(..);
    But when it come to the reports based on the data block from the form, it doesn't work. it always fetch all the records from the table which the data block is based
    Anyone can tell me how to make that work?
    thanks

    I have successfully do this when I am running forms and >reports in localhostTell me how did you achieve this?
    Did you have both Reports and Forms running under same oracle home?
    and off course was it a clinet server architecture?
    What version for Form and Reports did you use?
    Which executables did you use and what was your call from forms? When you call from Forms, which Reports executable use to run the report?
    The data integration can only be achive if both the product were running under same Oracle home and were in client server architecture. I do not think data integration is possible in web architecture.
    Thanks
    Rohit (Orcale Reports Team)

Maybe you are looking for