HOW TO MAKE ROUND BUTTON

HI PLS TELL ME HOW TO MAKE ROUND BUTTON ON FORM.

Rounded end buttons (e.g. Oracle Look and feel) are do-able in both 6i and 9i using PJCs in the 9i demos see the rollover button example, in 6i I seem to remember that there is a RoundedButton sample in the demos.
Both sets of demos can be downloaded from http://otn.oracle.com/products/forms.
If you want circular buttons then you'd have to use an Image for that.

Similar Messages

  • How to make the buttons INVISIBLE in the Application toolbar

    Hi All,
    I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
    Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
    I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
    or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
    Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
    Thank you in advance.
    Regards.
    Paddu.

    Hi,
    Try to use below in the PBO module status_0100 OUTPUT.
    DATA t_fcode TYPE TABLE OF sy-ucomm.
    refresh t_fcode[].
    APPEND 'Function code name of the button' TO t_fcode. 
    Check the condition here for which you want to make field visible.
        DELETE FCODE of the button from T_FCODE table
      ENDIF.
      SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • How to make a Button to work Actively even if there is a mandatory field..?

    Hi All..
    How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
    I am badly in need of this logic, as i have to incorporate in my code..
    Points will be rewarded without fail..

    Hi Pavan,
    I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:  s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
    SELECT-OPTIONS:  s_panid FOR zoindex_val-zopanid.
    SELECT-OPTIONS:  s_effdat FOR zoexchrate-zedate.
    SELECTION-SCREEN END OF BLOCK b2.
    *-- AT SELECTION-SCREEN
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.
    *-- Obligatory Country Code
      IF s_land1[] IS INITIAL.
        MESSAGE e050 WITH text-050.
                     "Please select the Country Code
      ENDIF.
    So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
    Hope this would help u in some way. Please do reward the helpful answers.

  • How to make "Utility" button in Printer Setup Utility available

    There, i add a printer in the Printer Setup Utility and select it. i want to open printer utility, but the "Utility"
    button in Printer Setup Utility is dimmed. In addition,
    "Printer\Configure printer" in the Printer Setup Utility menu is also dimmed.
    How to make "Utility" button in Printer Setup Utility available?
    Thanks in advance.

    Hi Jiong,
    That button is to acess the printer utility for that particular printer, not all printers come with a utility. If you have the disk that came with your printer, you can see if it has a Macintosh driver, if it does then it mimght have the utility with it. It's pretty hard to run the utility on its own, its burried somewhere in the system so that's why you have that menu item. You can alternatively go on the internet and download the latest driver, which might have a utility. All the utility will do will give you options to check nozzle patterns, alighnement, ink tank levels, and cleaning options - just mimnor maintenence junk, non-essentials, etc. I think Tiger just comes with a whole heap of generic drivers for different printer lines, can't say for sure.
    I wouldn't worry about it, especially if you have a relatively old printer.
    Hope that helps
    DKR

  • How to make a button load a sprite from library??

    PLEASE HELP!!
    Hey everyone.. iv been looking for help for a few weeks but cant seem to find the awnsers
    I am trying to create a newspaper that consists of four pages. Each   page i have created and are sitting in the library as sprites. Each page   has buttons that need linking so that when pressed it loads the next   page or page that i want. This is the part i am confused with =/ how do i   make the buttons on each page load the next page (sprite) from the   library??
    Basically i want to no how to make a button load a sprite from the library when clicked. Does anyone no the script for this?
    Thanks for any help

    A question arises as to whether or not you are posting in the right forum.  Sprites are AS3 objects.
    If you want to add movieclips to the stage from the library using AS2, then you need to assign them each an Identifier via right clicking them in the library and selecting the Linkage option... from there you slect the option to Export for Actionscript and then assign the Identifier.
    You then use the attachMovie() method to make use of that Identifier to dynamically load the library object.

  • How you make rounded corners

    Hello
    How you make round corners to the form when i use a div in dreamweaver cc i have try this but only the div change
    Thankes

    Sorry you can't change the style of the FormsCentral HTML form. The form is put in an iFrame inside you div and since the content of the iFrame is not coming from your server you can't modify it.
    I found this thread online that you might want to look at :
    http://stackoverflow.com/questions/583753/using-css-to-affect-div-style-inside-iframe
    Gen

  • Well how I make Rounded Table Corners (html) ?

    I use dmwr mx 2004 , well how I make Rounded,Table,Corners
    (html) ? CSS TABLES can be with Rounded Corners ?

    On Wed, 12 Dec 2007 16:40:01 +0000 (UTC), "123polis123"
    <[email protected]> wrote:
    >I use dmwr mx 2004 , well how I make
    Rounded,Table,Corners (html) ? CSS TABLES can be with Rounded
    Corners ?
    No - you have to use images.
    as already said - just google for more info
    http://www.google.co.uk/search?hl=en&q=round+corners+on+websites&btnG=Google+Search&meta=
    ~Malcolm N....
    ~

  • How to make round curves when you are animatting with the Rec mode?

    Hi! I am making a project in motion. I recored a freind writing words and stuff in the roof of my house with two flashlights. My plans was to follow the lights with motion traking: Analize move or match move. And then add a particle emmite for making something like this: http://www.youtube.com/watch?v=MZf2W3S7gV0&feature=fvw . When i tried to make the match move it was imposible. So i desided to make it manually with the REC button. And it work perfectly, the only problem is that it can's achive the round cruves (bezier like). I can only make squared like turns and it looks awful. I have also tried bezier as a path but i don't know how to make the particle emmiter follow it with different speeds, becouse the movement of the flashlight is inconstant.
    What can i do to make a round curved path and make a particle emmiter follow it with the rec button with the different speeds of the flashlights? Please help me!!!! I have to deliver this work for tuesday!
    Thanks for you time y hope you can help me out as soon as possible.
    Juan Javier.
    PD Sorry for my english! jajajaja.

    Juan Javier Ibarra Pitts wrote:
    When i tried to make the match move it was imposible.
    Hi
    Why was it impossible?
    It sounds like tracking is the only way your going to achieve what your after given the way you've shot your footage and the spatial and temporal nuances therein.
    You'll find comprehensive instructions on how to track particles to footage starting on page 49 of this document:
    http://manuals.info.apple.com/en/MotionSupplementalDocumentation.pdf
    Regards.

  • How to make a button stay down when I click on it in  CSS nav bar.

    So I have created a horizontal navigation bar, I use the CSS
    Sprites/Pixy method to get the hover working with the same image as
    the link/in active stage of the buttons.
    Now how do I make the button stay down when someone click on
    them?
    These are the codes for the nav bar.
    #nav{
    width: 780px;
    list-style: none;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    padding: 0;
    height: 40px;
    #nav li{
    font-family: Arial, Helvetica, sans-serif;
    font-size: 14px;
    font-weight: bold;
    float: left;
    padding: 0;
    #nav a{
    width: 125px;
    display: block;
    color: #000000;
    text-decoration: none;
    text-align: center;
    background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    background-repeat: no-repeat;
    background-position: center 2px;
    padding-top: 14px;
    padding-bottom: 10px;
    background-color: #000000;
    #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    #nav a:hover{
    background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    background-repeat: no-repeat;
    background-position: center -36px;
    color: #FFFFFF;
    width: 125px;
    padding-top: 14px;
    padding-bottom: 10px;
    background-color: #000000;
    Everything works so far, the hover works when you roll the
    mouse but when you click the button goes right back.
    How can I make it stay down and then go back to normal when
    you click on another link/button?
    Thanks very much.
    Patrick

    Read my suggestion again. You are missing a critical point. I
    show you
    exactly where to put the stylesheet. And it doesn't matter
    how many
    stylesheets you have on a page.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Webethics" <[email protected]> wrote in
    message
    news:[email protected]...
    >
    quote:
    Originally posted by:
    Newsgroup User
    > Change this -
    >
    > #nav a{
    > width: 125px;
    > display: block;
    > color: #000000;
    > text-decoration: none;
    > text-align: center;
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center 2px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    >
    >
    > #nav a:hover{
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center -36px;
    > color: #FFFFFF;
    > width: 125px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > to this -
    >
    > #nav a{
    > width: 125px;
    > display: block;
    > color: #000000;
    > text-decoration: none;
    > text-align: center;
    > background-image: url(ZITTO_IMAGES/button_set1a.jpg);
    > background-repeat: no-repeat;
    > background-position: center 2px;
    > padding-top: 14px;
    > padding-bottom: 10px;
    > background-color: #000000;
    > }
    >
    > #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
    6px;}
    >
    >
    > #nav a:hover{
    > background-position: center -36px;
    > color: #FFFFFF;
    > }
    >
    > Then on each individual page, change this -
    >
    > </head>
    >
    > to this -
    >
    > <style type="text/css">
    > #nav a#link4 {
    > background-position:center - 36px;
    > }
    > </style>
    > </head>
    >
    > (for link4, for example)
    >
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "Webethics" <[email protected]> wrote
    in message
    > news:[email protected]...
    > >
    quote:
    Originally posted by:
    Newsgroup User
    > > When they click on a button, do they go to another
    page? And is each
    > > button
    > > uniquely identified?
    > >
    > > If so, then put a little stylesheet on each such
    page that sets the
    > > particular button to the down sprite settings,
    e.g.,
    > >
    > > a#link6 { downspritevalues }
    > >
    > > --
    > > Murray --- ICQ 71997575
    > > Adobe Community Expert
    > >
    > >
    > > This is the link to the page.
    > >
    http://www.patrickjudson.com/zitto_web1d.html
    > > What state do I use to get this effect? The active
    or the visited?
    > >
    > > I want the buttons to remain down when click or
    even better, how do I
    > > get
    > > the
    > > welcome button to appear down when a person visits
    the page to show them
    > > they
    > > are at the home page.
    > >
    > > Thanks so much. Patrick
    > >
    > >
    > >
    >
    >
    >
    > Hey! Murray, thanks very much for the efforts. However
    I'm still confused
    > as
    > to where to insert the individual styles on each page.
    >
    > The pages already have a style sheet, in fact they all
    share the same
    > style
    > sheet. The following codes below is what you instructed
    but I'm confused
    > as to
    > where to insert them since the page already has a head
    opening and closing
    > as
    > well as a style opening and closing tags. Can you please
    add the codes you
    > instructed so I can see where they go and how to
    implement them?
    >
    > Thanks - Patrick
    >
    >
    > Then on each individual page, change this -
    >
    > </head>
    >
    > to this -
    >
    > <style type="text/css">
    > #nav a#link4 {
    > background-position:center - 36px;
    > }
    > </style>
    > </head>
    >
    > (for link4, for example)
    >
    >
    >
    >

  • How to make the  buttons same size on the toolbar

    Hi All,
    Can anyone please tell me how to make the size of buttons on the toolbar to be same .
    And i also want to add combo box at the right side of my menubar with prefered size.
    Please send me the solution if anyone knows . Thanks in advance.
    Regards,
    Shankar.

    how to make the size of buttons on the toolbar to be same Create a panel with a GridLayout. Add the buttons to the panel then add the panel to the menubar.
    add combo box at the right side of my menubar Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]How to Use Menu Bars for an example.

  • How to make picture button in oracle forms?

    can any one tell me how to make a picture button in oracle form builder?
    please help?

    Hi,
    Only a icon can be pasted on the push button. We can not user jpg,,jpeg or gif for the picture only ico file can be used.
    go to properyt pallet,
    make iconic as yes
    give the path in icon filename --- C:\Program Files\Winamp\eMusic\eMusicClient
    where eMusicClient is -- icon file name without extension, dont use " " in path
    bye

  • How to make a button appear boxed in when clicked

    For my Prototyping class I have to make an interactive fast food ordering system. I have majority of frames made I just need to add the interactive part to it. I am using AS2 in Flash CS3. I have the picture and the text grouped and are classified as a button. I want to make it so that when the picture or text is clicked it will make a black box appear around it, making it 'selected'. I've tried to add an Event Listener but couldn't figure out how to make the box appear on it. Any suggestions?
    These pictures are basically what I'm trying to accomplish.
    Keep in mind, I'm a Flash newbie, I have a probably 3 hours experience with Flash.
    But I do have knowledge of basic Java commands, so I can understand code.
    Thanks,
    Dudejoe04

    Onw way would be to create the buttons as movieclips so that when they are selected you move the movieclip's timeline to a rame that shows the rectangle around it.  Another way would be to have the movieclips as separate objects that you make appears when its associated button is clicked.  There are likelynumerous other possibilities.

  • How to make a button show AND hide a field?

    In an interactive form (with Adobe Acrobat X Pro), how can I purpose one button to:
    1.) Show a field when clicked the first time
    2.) Hide a field when clicked a second time
    I seem to only be able to make a button do one or the other, but not both with the same button. Maybe an easier way to say this is I want to be able to have one button turn a field "on" and "off".
    Any help would be GREATLY appreciated. Thanks! 

    Use this code:
    var f = this.getField("OtherFieldName");
    if (f.display==display.visible) f.display = display.hidden;
    else f.display=display.visible;

  • How to make form buttons do what they say?

    I created a test form on a sqlquery and the HTMLDB created the items and buttons correctly. Afterwards I created a process on load before heade to retrieve a row from the DB if some items are populated.
    What I wanted to know is:
    1-How do I make the buttons do the thing they say?
    2-Can someone explain what is the purpose, and how I use them, of the Database Manipulation Request that I can select in the button definition.
    Thanks,
    Eduardo
    PS: There is anything more complete that the online documentation?

    Reise,
    To see how things are supposed to work, create a report + form using the wizard on a single table with a primary key. Once completed, you'll run the report, click on an edit icon which takes you to a form, prepopulated with the data from the corresponding row. Because the primary key item has been set, the update button is shown and when you click update, and update will happen. Likewise, when you click delete, the row will be deleted. I think the problems you're having may be related to the fact that you're building a form on a SQL Query, which is quite rare and may require special tweaks.
    Sergio

Maybe you are looking for