How to make SAP ABAP trial version (with BI) system faster?

Hello,
I have just installed the SAP Netweaver ABAP trial version. (And using it along with SAP BI) My PC Configuration is 2 GB RAM, 10 GB Free HD, 1.6 GHz processor.
But when I run SAP BI, it is very slow. A regular command takes about 20-30 seconds. Is there any way I can speed up the SAP system?
I am ready to upgrade my laptop/Or even buy a new one with nice settings if I am sure that it is going to help me.
Thanks
Dhananjay

>
Mukesh Trivedi wrote:
> Hi Dhananjay,
>
> I have installed 2004s ABAP Trial Version (Also I have NW 7.0 ABAP trial version on other machine) and trying to access BI. Can you please guide me how can I access as when I try to access from 000 client it tells me to use 001 client and when I login to 001 client using SAP* user it tells me that System NSP Client 001 has no logical name Creat , Assign or Cancel, can you please guide what option I have to select and what are the steps after that.
>
> Thanks,
> Mukesh
Double post. See other thread for answer.

Similar Messages

  • Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

    Dear All,
    i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
    I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
    Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other  parts of the editor or he wanted to save what he did...
    Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
    Thank you for your help in advance.
    All the best, P. Phil.

    Yes, you need the lifecycle designer installed.  That should be enough to work with the SFP transaction.  But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
    Regards,
    Rich Heilman

  • Error on starting GUI  710 after installing SAP ABAP Trial Version

    I installed the SAP NetWeaver 2004s ABAP Trial Version that came with the book and CD.
    I set up the server properties as stated in the CD.
    System Connection Parameters:
    Description: NSP local
    Application Server: localhost
    System Number: 00
    System ID: NSP
    When I try to logon, it gave me the following errors:
    partner '127.0.0.1:sapdp00' not reached.
    Error Text: WSAECONNREFUSED:Connection refused.
    I am connected to internet thru the cable provider and even try do disconnect my firewall but no luck.
    Thank you for you time and help.

    Rich,
    I follow a link and instructions but still can not make GUI to work. Here what I did:
    1.     Reformat my hard drive, install XP SP1, made a connection thru the cable provider and downloaded all updates and SP2 with all updates.  I have Pentium 4/3.2 GHz with 512k desktop. Do I need to increase a memory to 1G RAM?
    2.     Before installation I unhooked the cable modem from my desktop.  Installed the MS Loopback Adapter and modified Internet Protocol (TCP/IP) properties to 10.10.0.10  & subnet mask 255.255.255.0.  Inserted the following in ETC HOST folder 127.0.0.1 localhost & 10.10.0.10 Mycomputer name. Do I have to this or during the installation these properties would be populated?
    3.     Installed MAXdb from CD.  No problem.
    4.     Installed GUI from CD. Entered new logon info NSP, 00, localhost, checked ETC SERVICES for 3600/tcp and everything looks good, but I can not logon saying ‘127.0.0.1:sapdpp00 not reached’…. The same problem that I had before. 
    I am willing to go from step 1 to 4 again if this necessary.    Thank you for your time and effort. Any help appreciated.

  • Connection Error on starting GUI after installing SAP ABAP Trial Version

    I bought the new edition of ABAP Object recently.
    I tried to install the SAP NetWeaver 2004s ABAP Trial Version that came with the book. After installing the WAS and SAP GUI 7.0.
    Then, I set up the server properties as stated in the CD.
    System Connection Parameters:
    Description: NSP local
    Application Server: localhost
    System Number: 00
    System ID: NSP
    When I try to connect to the server, it gave me the following errors:
    partner '127.0.0.1:sapdp00' not reached.
    Error Text: WSAECONNREFUSED:Connection refused.
    Please advise.
    Thanks.
    Kent

    Durairaj,
    I have installed MS Loopback Adapter, and also point my localhost to the IP:
    10.10.0.10   localhost
    But I still not able to connect to NSP local system.
    The network connection for the Loopback Adapter is showing No or Limited Connection, is that because of this reason?
    Thanks.
    Kent

  • Netweaver 7.0 ABAP trial version installation failure

    Hi,
          Iam trying to install SAP NetWeaver 7.0 ABAP Trial Version in my system. I have started the installation process by executing "SapGuiSetup.exe" which installed SAPGUI on my system. Then, when i executed  "maxdbtools/DBM76.exe", the following popup happened which says "-4 database instance not found" and iam unable to continue the installation process.
    Any information about this will be helpful.
    Regards
    Aravindh A S

    Hi Aravindh,
    as far as I know DBM76.exe is not supposed to install the complete SAP System, not even the database software - it's only the exe to install the DBMGUI for SAPDB.
    I'd recommend that you lookup the installation guide for SAP Netweaver 7.0 under:
    [service.sap.com/instguides] --> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) --> Installation -> Master Guide
    I know this is a quite long document but if you want to install SAP you need to read this to know about all the requirements and steps that need to be taken,
    Regards,
    Beate

  • Problems with SAP NetWeaver 7.01 ABAP Trial Version installation

    Hi,
    I have installed NW 7.01 ABAP trial version "successfully".
    Unfortunately the application server doesn't start.
    After some time the Dispatcher process stopps.
    In the syslog you can see that 7 workprocesses are started.
    they all don't seem to be able to connect to the database and shut down.
    The related syslog messages are:
    Database: SQL error -1070 occurred (possible network problems?). Work process is stopped
    Database: Database error -10709 at CON   
    Database: > Connection failed (RTE:Database name is missing) 
    SAP-Basis System: Stop Workproc 4, PID     4136
    I already re-installed the Trial version, and I also checked that the database is up and running.
    The error persist.
    Can anyone help ?
    Thanks
    Stefan

    Hi Juan,
    thanks for the suggestion.
    here's the trace file dev_dev0.
    Still need help though ....
    Regards Stefan
    trc file: "dev_w0", trc level: 1, release: "701"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Sat Oct 25 20:51:49 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
    B  Library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
    B  Version of 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.7)
    B  New connection 0 created
    M sysno      02
    M sid        NSP
    M systemid   560 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    7
    M intno      20020600
    M make:      multithreaded, ASCII, optimized
    M pid        5388
    M
    M  kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
    M  length of sys_adm_ext is 364 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5388) [dpxxdisp.c   1319]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Sat Oct 25 20:51:50 2008
    M  DpShMCreate: sizeof(wp_adm)          8232     (1176)
    M  DpShMCreate: sizeof(tm_adm)          3786880     (18840)
    M  DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1296)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04CA0040, size: 4389744)
    M  DpShMCreate: allocated sys_adm at 04CA0040
    M  DpShMCreate: allocated wp_adm at 04CA1BF8
    M  DpShMCreate: allocated tm_adm_list at 04CA3C20
    M  DpShMCreate: allocated tm_adm at 04CA3C50
    M  DpShMCreate: allocated wp_ca_adm at 050404D0
    M  DpShMCreate: allocated appc_ca_adm at 050409D0
    M  DpShMCreate: allocated comm_adm at 05040E80
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 050C1D30
    M  DpShMCreate: allocated gw_adm at 050C1D70
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 050C1DA0
    M  DpShMCreate: allocated wall_adm at 050C1DA8
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Sat Oct 25 20:51:52 2008
    M  ThInit: running on host 4FIL41430
    M  calling db_connect ...
    C 
    C  DBSDBSLIB : version 700.08, patch 0.007 (Make PL 0.7)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 002-121-083-965
    C  SQLDBC Library Version : libSQLDBC 7.6.4    BUILD 014-123-188-347
    C  SQLDBC client runtime is MaxDB 7.6.4.014 CL 188347
    C  SQLDBC supports new DECIMAL interface : 0
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports keepAlive indicator   : 0
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
    [dbsdbsql.cpp 113]
    C  Try to connect (SQLOPT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 137]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1199] [dbsh    1199 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#1 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#1 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10557]
    M 
    M  Info for wp 0
    M 
    M    pid = 5388
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server 4FIL41430_NSP_00 on host 4FIL41430 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Sat Oct 25 20:51:52 2008
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10777
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 5388) [dpnttool.c   334]

  • How to setup remote login for sap netwever 7.01 abap trial version

    hi to all
    i dont know this is correct place to post this question plz let me know
    i have installed sap netweaver 7.01 abap trial version successfuly now i want to allow one of my friend to login this server but i dont have exact idea how to do this so plz any suggesstion ??
    and  http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000  this is link provided with trial version  i am able to login  from my computer but i dont know how to use tihs one from other computer plz help me                                                                               
    thanks in advance

    if he will connect inside the same local area network http://your-local-ip-address:8000/sap/bc/gui/sap/its/webgui?sap-client=000
    if he will access thru internet he needs to type your wan ip address ([http://www.whatismyip.com/|http://www.whatismyip.com/]) but before that you have to adjust your router port forwarding settings, redirect port 8000 to your local ip. You may check your router's configuration documents for more detail information.

  • How to download SAP NetWeaver 7.01 - ABAP Trial Version?

    Hi Experts,
    Can anyone of you tell me how to download SAP NetWeaver 7.01 - ABAP Trial Version using SAP DOWNLOAD MANAGER?
    Thanks in advance,
    With kind regards,
    Kannan

    Hi Kanann,
    I downloaded it from here [http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2]
    Let me know if this information its ok for you.
    regards.
    Daniel

  • Require link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1

    can any1 provide me the link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1,Plz ..

    Hi Pedro,
    could you fix the error?
    I'm installing and I have the same problem.
    An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Archivos de programa/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
    Thanks.
    Anibal

  • How to install SAP NetWeaver 7.01 ABAP Trial Version software

    Hi,
    I have SAP NetWeaver 7.01 ABAP Trial Version software.
    Can anyone help how to install this software.
    and I also need the path to install SAP NetWeaver 7.01 ABAP Trial Version software.
    Thanks & Regards,
    Chandu.

    Hii,
    To install SAP NetWeaver 7.01 ABAP Trial Version jst go thru the following links.
    https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/library/uuid/eea83e34-0801-0010-46a2-e830cb0d496f
    www.sapdb.info/install-sap-netweaver-abap-edition-on-local-pc/

  • How to uninstall SAP NetWeaver 7.01 ABAP Trial Version on Vista

    I can't  uninstall SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista, because installation didn't finish

    Hello
    Open the Start.html file in the SAP folders you have downloaded. You can see Uninstall instructions on right hand side and then go to c: drive and delete all the SAP folders you see and then in registry  . It is good to follow those steps to uninstall bcoz even u uninstall there will be some traces in you system
    Regards
    Anil

  • Install SAP NetWeaver 7.0 (2004s) - ABAP Trial Version  on a VM with W2K3

    Hi community,
    i tried to install the SAP NetWeaver 7.0 (2004s) - ABAP Trial Version on a VM-Image of Windows 2003 server, but received a 601-error concerning the MaxDB-Installation (but surely there was no SAP-installation before)..has anyone an idea if this installation is possible at all?
    Regards
    Christian

    ...

  • New User - SAP NetWeaver 7.0 - ABAP Trial Version

    Our company as developed software link from our application to the SAP Plant Maintenance (PM) module. 
    To simply the discussion, please assume that the link only creates a PM Notification.  Currently this is done via RFC to IQS4_CREATE_NOTIFICATION.
    One of our biggest challenges in developing the link for our Oil Refinery customers is the fact that we do not run SAP in our development office.  This makes it very difficult to maintain the link because we need to rely on our customer’s systems to test any changes we make.
    In the past, we have made several attempts to purchase a developer license to SAP but could not determine the correct sales avenue.  We ended up talking to sales people who told us that we needed to spend $50,000.
    Recently, I have installed SAP NetWeaver 7.0 - ABAP Trial Version.  I have it running and can log into the SAP GUI and I can make remote function calls to the Airport demo that is installed with it.  This environment appears to have everything that I need to develop our link but I can not figure out how to install the PM module.  I am not sure if this is even possible.
    So here are my questions:
    1) Can the PM module be activated/installed in the SAP NetWeaver 7.0 - ABAP Trial Version?
    2) Would this be included if we purchase the SAP NetWeaver, Development Subscription for $2,300/year.

    1. No
    2. yes it has everything

  • Installing SAP NW 7.01 ABAP Trial Version for dummies

    Hello sappers...
    Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
    Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall.  After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
    I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
    Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet?  If it's to generate an IP address, surely my computer has one.  Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind!  Anyway, I have tried with and without this on my various attempts.
    ANYWAY.... the sorry saga goes like this...
    I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
    My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
    However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
    When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
    That's one of my better attempts.
    Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect).  Trying to sign on produced equally disheartening error messages...
    Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
    Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
    Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
    Log text gives
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    ok, this is the log from my latest attempt...
    > Subprocess starts at 20090312182156
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182159
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182205
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 007-123-197-046
    OS         = WIN32
    INSTROOT   = C:\sapdb\NSP\db
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182210
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182212
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182213
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182213
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182228
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'
    > Subprocess starts at 20090312182303
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182304
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182304
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182305
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182306
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182316
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'

  • Error Install : SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    *     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
    *     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
    *     at java.lang.reflect.Method.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
    *     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
    *     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
    *     at java.lang.Thread.run(Unknown Source)*
    Can somebody give me suggestion how to resolve my probelm.
    thanks,
    Amir
    PS : I have all the requirements system

    did u installed loopback adapter as mentioned in the installation instructions?
    Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
    does your pc have internet connection available?
    Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
    is the installation process completed?
    Yes the installation process is completed and with success (but without C:\sapdb)
    (Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
    how much time the installation taking.. usually the step of database installation and configuration takes a long time.
    Not much time because there is not database installation
    while logon to sap, what details are u giving.. the system number .. is it 00,
    When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
    which other SAP softwares are installed on ur pc.
    In each time, when I tried to install SAP, I uninstalled all SAP software
    I hope you can help me for the install
    Note : I work on Vista sp1
    Thank you for your help
    Amir

Maybe you are looking for