How to make smal areas in a map clickalbe and adjustable for Flash..

I am trying to make a clickable map where you can click on
small areas and be linked to another page.... I can of course break
the map to 100 pieces and make 100 buttons and put them together...
But this is so time consuming and I am sure there is a more
convenience way to make a map clickable in small pieces... Any
ideas? Thanks for all suggestion...
PS: Probably, I should do this in a different program as
Firework then import to Flash...hmmm ???

Are you making this in Fireworks or Flash? In Fireworks, look
into using an Image Map. In Flash, you would need to make a
seperate button(either by hand or by scripting) for each clickable
spot.

Similar Messages

  • How to make Business Area as the reqd file on the Account Assignment level

    How to make Business Area field as the required field  on the Account Assignment level?
    Thanks!
    Mrudula Patel

    You will have to be a little more specific about account assignment. Not sure what kind of document you are concerned about.
    For G/L accounts, the account assignment (Field Statu groups) is done in customizing under SPRO -> Finacial accounting -> Document -> Line Item -> Maintain Field Status Variant. The settings for the fields to be displayed can be maintained here.
    You need to know the field status variant used for the account. This can be found in transaction FS00 under the create/bank/interest tab. You can also reach the maintenance transaction for the variant by double clicking on it.
    Hope that helps!
    Rishi

  • How do I make an area of my clip colour and the rest B&W?

    I heard about masking but how do I make an area of my clip colour and the rest B&W?

    The filter you can use is Desaturate with Amount=100 in Image Control.
    If you want to apply it to a fixed area within your clip, put a copy of the clip in V2 on top of the priginal (supposing your clip is in V1), apply Desaturate and use Crop in Motion tab of the viewer to define the edges of the rectangle; you can also use Edge Feather to smooth the borders.
    If the portion you want black&white is actually a selected person or object in the clip then you must apply Chroma Keyer or 4/8 Point Matte to isolate that portion before applying Desaturate.
    I hope I was clear...
    Piero

  • How to make Help view well on both laptops and desktops

    Hi -- I'm trying to learn RoboHelp 7 and just created my first WebHelp project. I want to show it to a friend, but don't have a server I can publish it to, so I copied all the files onto my flash drive and put it on my laptop. It all works fine, which is a relief -- however, the custom colors are way off, and some of the screenshots are now too big, so the user would have to scroll (which can be annoying). I created it on my desktop and have been looking at it on a larger monitor (1680x1050), but the laptop is old (1024x768). The thing is, a lot of people might have to view it on 800x600.
    I couldn't find any information in RH's Help about how I should have set it up so that it views well on different systems. I'm hoping someone could please advise me as to what I should have done, and if there's anything I can do now to fix it, or point me to some information. I used Arial 10 pt for the text, and now it looks 12 pt. Should I have made it 8 pt? Is there a rule for how large an image should be to be viewed on a laptop and a desktop?
    One last thing, it's too large to put on a CD, so is does anyone know how to make this into an executable?
    Thanks in advance for any help you can give!
    Daryl

    Hi Daryl
    I use an eBook compiler to convert WebHelp to an executable file. You might investigate eBook compilers for that bit. However, I'm not sure how that would help you since a compiler will do little more than to take a swarm of WebHelp files and store them in a wrapper to create a single file. Generally you will end up with something that although it exists as a single file, is larger than what is inside.
    Are you SURE it's too big for CD? CD will hold 650 megs (700 if you buy the extended types).
    On the screen size issue WebHelp itself should adapt fine. Probably it's the images you are concerned with. And the general rule of thumb is to capture images at a reasonable size to begin with. Never EVER just insert a big ole image into RoboHelp and grab the sizing handle to make it smaller. It will still consume a larger amount of space and the quality will suffer badly. So the best approach is to copy the image at a reasonable size to begin with. Something that may fit nicely in the Topic Pane area as it is presented in the space provided by the lowest common denominator. In your case I believe you said that many are still at 800x600.
    Your 10 point text will still be 10 points at a smaller resolution. It will just look a bit different.
    Hopefully this helps... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms

    Hi
    How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms. deskret pulse length 0.01 ms. for MCB2300. Are there examples of such implementation?
    thanks

    Sergiv,
    I see you as having two options (if you want finer resolution):
    1) Lower the period of the PWM (such that the percentage values would be of finer resolution with regards to the overall PWM period).
    2) Alter the duty cycle of the PWM with an Inline C node.
    From what I understand, LabVIEW simply calls into the PWM driver distributed by Keil (for the MCB2300).  You can call into the PWM driver directly and/or change register values on the chip if you want in order to do whatever you want.  Both would require you to look through/program in C code.
    Kevin S.
    Applications Engineer
    National Instruments

  • How to make a silhouette from a portrait (photo) and-

    How do I make a silhouette from a portrait?
    And how do I make the background transparent?

    Do you mean that I send you the portrait?
    Chabæna
    26 apr 2014 kl. 12:31 skrev c.pfaffenbichler <[email protected]>:
    Re: How to make a silhouette from a portrait (photo) and…
    created by c.pfaffenbichler in Photoshop General Discussion - View the full discussion
    How do I make a silhouette from a portrait?
    Ah, but wouldn’t it be ever so much easier to explain if you actually provided (a lores of) the image in question?
    And how do I make the background transparent?
    Preferably with a Layer Mask and then saving in the appropriate file format (psd or png24 for example support transparency).
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6332417#6332417
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6332417#6332417
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6332417#6332417. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to make an openfiledialog? (browse a file and put it in a parameter)

    How to make an openfiledialog? (browse a file and put it in a parameter)
    Best Regards

    hi,
    check the code  below:
    FORM sub_gui_download.
    * Define local variables
      DATA:
        lo_fullpath       TYPE string,
        lo_filename       TYPE string,
        lo_path           TYPE string,
        lo_user_action    TYPE i,
        lo_encoding       TYPE abap_encoding.
    * Define local constants
      CONSTANTS:
        lc_encoding(1) TYPE c VALUE 'X',
        lc_directory TYPE string VALUE 'D:',
        lc_filetype TYPE char10 VALUE 'DAT',
        lc_separator TYPE char01 VALUE 'X',
        lc_blank TYPE char01 VALUE ''.
    * Call method to create dynamic save_path and save_format
      CALL METHOD cl_gui_frontend_services=>file_save_dialog
        EXPORTING
          with_encoding        = lc_encoding
          initial_directory    = lc_directory
        CHANGING
          filename             = lo_filename
          path                 = lo_path
          fullpath             = lo_fullpath
          user_action          = lo_user_action
          file_encoding        = lo_encoding
        EXCEPTIONS
          cntl_error           = 1
          error_no_gui         = 2
          not_supported_by_gui = 3
          OTHERS               = 4.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
    * Check user_action
      IF lo_user_action <> cl_gui_frontend_services=>action_ok.
        EXIT.
      ELSE.
    *   If user_action equals to action_ok, call function module to download datas
    *   using download table i_dwn_tab
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename                = lo_fullpath
            filetype                = lc_filetype
            write_field_separator   = lc_separator
            trunc_trailing_blanks   = lc_blank
          TABLES
            data_tab                = i_dwn_tab
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            no_authority            = 5
            unknown_error           = 6
            header_not_allowed      = 7
            separator_not_allowed   = 8
            filesize_not_allowed    = 9
            header_too_long         = 10
            dp_error_create         = 11
            dp_error_send           = 12
            dp_error_write          = 13
            unknown_dp_error        = 14
            access_denied           = 15
            dp_out_of_memory        = 16
            disk_full               = 17
            dp_timeout              = 18
            file_not_found          = 19
            dataprovider_exception  = 20
            control_flush_error     = 21
            OTHERS                  = 22.
        IF sy-subrc <> 0.
          MESSAGE i007.
        ENDIF.
      ENDIF.
    ENDFORM.    

  • How to make an effect of a glass breaking and fall into pieces?

    How to make an effect of a glass breaking and fall into pieces?
    I want to make an effect where there's a guy hitting a wall and the wall falls into pieces...Please help!! I can make the guy in green screen but its the effect of the wall breaking that I want to know how to make in motion. Hope anyone can help

    Search is your friend:
    http://discussions.apple.com/search.jspa?threadID=&q=shattering&objID=f656&dateR ange=all&numResults=30
    Patrick

  • How to make the mobile application work with firewall and anti-virus ON

    Hi,
    I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
    Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
    Thank you

    Dear Rajesh,
    Create a policy in your fire wall to allow the port to send and receive data.
    I believe the port for the mobile should be port 8080 and 8443.
    And your license server port 30000 and 30001
    nd.Q

  • How are the .7z files used and installed for photoshop elements and premier elements?

    How are the .7z files used and installed for photoshop elements and premier elements?

    Hi,
    You can try to extract them to a folder and then try to install using the setup file.
    Or you can try to download the .exe file ( Small File ) for the software you have and then run the .exe file and it will start the installation. Both .exe and .7z file for the application should be in same location.
    Download Photoshop Elements products | 9, 8, 7
    Download Photoshop Elements products | 11, 10
    Download Premiere Elements products | 11, 10
    Download Premiere Elements products | 9
    *** You can either download the .exe file from the above download links or you can also download both .exe (File 2 of 2) and .7z (File 1 of 2) from the above links.

  • How to make editing cell to show up caret and taking keyboard event

    Hello everyone:
    I have the following problem with table editing.
    1. using mouse clicking, the editing cell will have cursor and taking keyboard event.(no problem with it)
    2. just type in data, it will show up in the selected cell, but the editing cell do not have cursor visible and also do not fire the keyboard event.
    I have problem with this one. So how to make editing cell to have caret visible and taking keyboard event.
    Thank you very much!
    --tony                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi,
    you should subclass JTable and overwrite two methods.
    1. protected boolean processKeyBinding(javax.swing.KeyStroke ks,
    java.awt.event.KeyEvent e,
    int condition,
    boolean pressed)
    to store the current keyboard event,
    2.public boolean editCellAt(int row,int column,java.util.EventObject e)
    to fix the problem with isCellEditable and curret position and direct the event into proper place.

  • How to make a Integration between jdev10.1.2 and vss

    How to make a Integration between jdev10.1.2 and vss to enable a version control.the help document tell to make a extension file, but how to do? thank you!

    http://www.oracle.com/technology/products/jdev/101/htdocs/partners/addins/905resources.html
    There is a link there to:
    Creating a Version Control System Extension
    A project with sample code to get you started

  • How can I get Safari to remember my ID and password for a site?

    How can I get Safari to remember my ID and password for a site?
    Specifically, I would like it to remember my 14 digit library account on:  http://polaris.plano.gov/Polaris/logon.aspx
    Firefox on my old PC was able to do this no problem.  I have recently switched over to Apple.  Thanks for your help!
    FYI, I am on a new Mac Mini with OS X 10.8.3 and Safari 6.0.4.

    Some websites request the web browser to NOT autofill the username, password.  It is possible the library site is doing that. Your previous firefox on the PC may have been sufficiently old to not be able to handle such a request.  There are password managers you can get to over-ride such things (search Safari extensions).
    charlie

  • Just subscribed to CC for educators and my apps are all working as trials and asking for for a key.

    Just subscribed to CC for educators and my apps are all working as trials and asking for for a key.
    I had a trial before subscribing yet even after logging in with my email which is used for the CC account I continue to get a count down or an expression for applications who should already be unlocked.
    How do I go about correcting this? Uninstalling and reinstalling has not made a difference.
    I'm able to log into my adobe account and get promoted "You're already subscribed to the Creative Cloud Student and Teacher edition (one-year)" when prompted to "BUY" by the app

    There is no billing issue.
    The CC does not needs any serial number, it is based on Adobe ID.
    In case you are being asked for serial number then you can refer to.
    Creative Cloud applications ask for serial number
    Re: Invalid serial number?
    Regards
    Rajshree

  • Question: How to make typing area bigger in chat?

    My first post disappeared, so if this is a double, I'm sorry.
    I can't find how to make my typing area in the chat bigger - I only seem to be able to make it wider and I'm really, really annoying with the ridiculously tiny one-liner area I currently have. How do I make it bigger?
    Thanks!
    Solved!
    Go to Solution.

    This is not possible with the latest Skype 7.0 version. The typing area will only expand vertically when entering a new line of text.
    If you prefer the old Skype style, then uninstall the 7.0 version and install the previous 6.21.0.104 version.
    http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

Maybe you are looking for