How to make small updates to a website

Hi all,
Let's say you make a website and then realize that you want to add or adjust just one of the photos in it. LR will need to remake the entire site from
scratch (slow if you have a lot of photos in it). PS on the other hand has always been very clever about just adding or updating the site to include the new or changed photo. Is there a trick to get LR to be this clever?
thanks for any thoughts on this,
foster

> Yes, I see your point about it not being intended for managing sites etc.
> I'm just not sure how to use the website module effectively.
> My workflow before LR was to do all my adjustments in nikon-capture or PS
> and then export everything to jpg. And then I'd get PS to make my website
> collections of images from those jpg files. I was hoping that with LR, I
> could avoid doing a separate export of everything to jpg.
Yes, you can use LR to upload directly to the website, but neither PS nor LR
are website management applications, so you will probably want to add such
an application to your workflow. I use Dreamweaver, but others will work.
It is common practice to have a copy of your entire website on your local
machine. Using that model, you could use LR to create the web collection
and copy to the folder in the local machine (just set the destination folder
to the local copy of the web site). Then use your web application to a)
link the new collection to the rest of the website, and b) sync the local
copy with the online website, which will upload all new files. If you later
decide to modify a single photo, then sync again using the web management
application. Of course, that's just one possible solution, but any good
solution will likely include a web management application.
Best,
Christopher

Similar Messages

How to make system update with "use automatic configuration script" and an URL

Hello,
all our laptop using "use automatic configuration script" with an "accelerated_pac_base.pac" prxy setting.
How can we make system update work with that ?
And no way for us to by pass this proxy settings with
Thanks

I mean there is no general method which is capable of correcting all possible errors found by schema validation.
For example if the validation says it expected to find an <organization> element or a <company> element but it found a <banana> element, there is no way to determine what repair is necessary.
Anyway the requirement is fighting against the way things work in the real world. The purpose of validation is just to find out whether a document matches a schema. If it doesn't, then too bad. Send it back to be fixed or replaced. If you are having a problem because you repeatedly get documents which don't quite match your schema, then you need to train the users to produce valid documents or to give them tools which help them do that.

How to make live update stuff...

HI, everyone..
I would like to make the program for Live Update stuff like AntiVirus Norton.
Please Let me know how to make it, and Could anybody tell me about algorithm of it?
I have no idea how to do...
Thank you...
God bless you..

I'm not sure whether you want, like, more elegant solution than this, but here it is:
1. Make user execute your 'LiveUpdate' program.
2. Make the program talk to your server or (if you don't have a server) CGI script using Networking API
i.e. You can have a custom CGI script on Tripod.3. Determine whether there is an update
4. If there is an update, download!

How to make an update in adobe player uppod.

Player pack is inserted into the site http://like-film.ru . Help how to do automatic update to this site.

Hi,
I'm not sure I understand exactly, however, if you're saying that Flash Player installer is downloading from http://like-film.ru then it's not an official Flash Player download. If this is not what you mean, please clarify and we'll try to help you.
Maria

How to make smaller format?

Hi!
Is it possible to make smaller format for movie(DVD),because when i copy movie from original dvd to my laptop he takes 7.78GB on hard?
thank you

Have you already tried burning to Verbatim DL media 8.5GB at 4x?
If DL isn't an option for you then consider using Roxio Toast and SL Dvd-R (fit to dvd) in order to burn the image to SL Verbatim Dvd-R (your choice).
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

HOW TO MAKE ITEM UPDATABLE/NON-UPDATABLE DYNAMICALLY

Hi ,
I have a form with tabular layout on a multi record lock .
From shows 20 records at a time and there is a scroll bar to scroll down .There is an item "flag" in the block which is not visible in the form with values "Y" or "N" .
I need to make some text items in the record updatable when that record has "flag" ="Y" .Documentation say's we need to use set_item_instance_property to do that .
I tried it in when-new-record-instance,pre-query and key-exeqry triggers with no luck .
I would really appreciate if you could give me the following info
1) How to loop through each record in a block to check value of "flag"
2) Which trigger to use and level form,block etc .
Thanks,

Ram,
Thanks for the update . Now it works . Another problem though ...
My form displays 20 records at a time and I have a scroll bar .
I need to change the background of Item to white when it is updatable and gary when it is not updatable .
I've created a visual attribute and was using it with set_item_instance_property like this ..
declare
last_rec number;
begin
last_record;
last_rec := :system.cursor_record;
first_record;
for i in 1 .. last_rec
loop
if :ANNUAL_FUNDS.flag != 'Y' then
begin
Set_Item_Instance_Property( 'EXP_FUNDS', CURRENT_RECORD, UPDATE_ALLOWED , PROPERTY_FALSE);
Set_Item_Instance_Property( 'EXP_FUNDS', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'VI_UPDATE');
end;
end if;
if :system.last_record = 'TRUE' or i = last_rec then
exit;
else
next_record;
end if;
end loop;
FIRST_RECORD;
end;
When I took out the loop the way you've mentioned
it's changing the background color of the item for the record in which cursor is in . Users want to look at the screen in a glance and go directly to the item which is updatable .
Is there any way we can loop through all records once and change properties in one shot ?
Sorry to bother you,
Asha

How to make Smaller Pdf Files?

Hello. Previously I had asked a question on how to fit multiple pages into ONE pdf file. My questions was answered by advising me to download a program from Monkeybread Software, which I did, and which worked fine.
I now have a new problem. I have about 25 letters that I want to put in ONE pdf file, however each page is about 2.5mb after being scanned, therefore 3 pages when merged into One pdf file totals almost 10mb which is too large for sending on most servers.
The question then: Is there anyway these files can be made smaller so that all 25 pages could be put into the one pdf file and the size of that file be kept at a maximum of about 7mb?
(For info, the way I am making the files, is to scan one page and send it to my printer which has a 'Save to pdf' file on it. I then save that to the desktop and then drag each pdf into the Monkeybread program in order to merge them into one pdf) Hope this makes sense and that someone may have an answer for me. Thanks.

Some scanner software has a setting for "line art" that sees only black and white--no grays. I find that works best for scanning typed letter and the like. Makes very small files even at 300 dpi, which is as fine as you need for text.
The choice of resolution depends on how you intend to use the resulting pdf. For on-screen viewing, 150 or even 72 dpi is acceptable (except for those with vision challenges), but will not print very well. If you intend that the file be sent to others who will print it out for reading, then a line art setting (if available) at 300 dpi will result in decent print output without making a gargantuan file.
In the long run, having a scanner capable of optical character recognition (OCR) may work best because you can then paste the resulting files as plain text into one word processing document. A text-only WP file of 25 pages is doable for most mail servers. Remember: when using OCR, check the final document for scan errors. Example: the letter "i" may get picked up as a capital "I", the number 1, or an exclamation point ( ! ). Usually such errors are minimal and are often flagged by the WP program's spell checker.

How to make an update of millions of rows using only one commit statement?

Hi, I need to execute a complex update statement over a partitioned table. I take advantage of partitioning: loop for each partition, do the update and make commit. Of that way I'm updating and then commiting around 600.000 rows.
But some of our systems have Oracle Standar Edition version and partitioning is not supported. I want to make the same update without taking advantage of partitioning. That is my problem. I need to update around 15.000.000 of rows but if I try to make commit at the end, this update generates a lot of UNDO data and fails because there is not enought space for retention.
I would like to know your suggestions. There is some way of avoid UNDO data generation? There is some way to execute commit automatically?
Thanks for your support.

>
This is exactly what I was looking for. Its a shame is only available in 11.2.
>
Then you may be interested in 'Do-It-Yourself Parallelism' for your 10g version to accomplish the same thing very effectivelyl.
See the 'Do-It-Yourself Parallelism' section of this article by Tom Kyte.
http://www.oracle.com/technetwork/issue-archive/2009/09-nov/o69asktom-089919.html
>
In my book Expert Oracle Database Architecture , I spent quite a few pages describing how to perform batch operations “in parallel,” using a do-it-yourself parallelism approach. The approach was to break up a table into ranges, using rowids (see www.bit.ly/jRysl for an overview) or primary key ranges (see “Splitting Up a Large Table”). Although the approach I described was rather straightforward, it was always also rather manual. You had to take my “technique” and tweak it for your specific circumstances.
>
You really should get the book since it has ALL of the details. But the above quote has a link to that "Splitting Up a Large Table" doc and that doc shows how to do it.,
http://www.oracle.com/technetwork/issue-archive/2006/06-jan/o16asktom-101983.html
>
Splitting Up a Large Table
I would like to partition a range of values into balanced sets. Initially I figured that one of the analytics functions might be useful for this and decided to look into these and learn more about them. The question I had in mind was, "For an ordered list of values, how can we 'chop' them into ranges and then list the first and last value for each range?"

Form function security (how to make form Updatable)

Hi...friends...
I have one standard oracle form. Data of that form is updatable in 11.5.7 instances...I can insert,update and delete.
But, we had upgraded Apps to 11.5.10...so, now the same form data is not updatable..I can insert, but cant delete or update...
So, is there any thing like form function security attached with that form or responsibilities in previous version... which are not in new 11.5.10 ??
How can I make that form contents updatable through Sys. Admin. concept.
(not through Form Builder Design)
Thanks in advance....

Thank you guys..
actually, it was a bug with 11.5.7 oracle versions specific to one check box value.
it was treating check box values as,
i) checked then 'Y
ii) Null then 'Null' ------- the problem was here...due to null, query was not fetching data and that form is having flag which understands only 'Y' or 'N'
iii) not checked then 'N'
anyway thanks to u all...

8.0Gig DVDSP file size. How To Make Smaller?

Just when I keep thinking I'm "finally" done with my project . . . something else comes up. The file size of the project is presently about 8 Gigs. The duplication house I went to suggested NOT having a project of that size, as the media that they would have to use on it would not be as reliable on certain DVD players. They suggested fitting the project to a single 4.7 Gig disk.
Okay so I used compressor to get the following sizes:
Video only track of the film = 2.5 Gigs
Audio track of the film = 741MB
Director Commentary track = 741MB
Video only of Deleted Scene = 173MB
Audio of Deleted Scene = 48 MB
Deleted Scene Commentary = 48MB
The total on all this is about 4.25 Gigs. The problem is that I have to use each video track twice. Once for the commentary and once without the commentary. All and all, and with the necessary menues, etc . . . the project file is at about 8Gigs.
The dupe house said I can use Toast to compress the size of my project, but 1) does anyone know if this compression will constitute a big level of quality loss on the images (it's a DV feature, by the way - not film), and 2) I have Toast Titanium version 6.0. Does this version of Toast even have a compression option?
I would much prefer to be able to minimize the file size in DVDSP itself somehow, rather than doing a blanket compression on the entire disk using Toast (unless some of you know that this would actually work well). Does anyone have any suggestions as to how I can get my project to squeeze into a 4.7 Gig, single layered DVD? I would imagine that a 70 minute feature with one deleted scene and a couple of director commentaries should be pretty standard fare - if not downright easy . . .
I just don't know how to do it.
Any help would be greatly, greatly appreciated.
Thank you very much in advance for all the help and support,
Javier Calderon

Javier72 wrote:
Thanks again, Drew. The audio is aiff. It's at 41 Kh. Is there a specific AC3 format that I should export the audio to? I know/imagine that there are various manners of exporting audio to AC3, so I want to make sure that it's the "right" one, so to speak.
Take a look here on setting up Compressor (not sure which you are running, but general idea)
http://dvdstepbystep.com/qc.php
For AC3 you should set Dialog Normalization to -31 , preprocessing to none and dechecking Copyright Exists and Content is Original also helps prevent glitches and no compression and selections not checked -this description and pictures with the details about 1/2 down page here
http://dvdstepbystep.com/fasttrackover.php
In my first post there are examples of the audio and the .dmg is a project you can download and look at to see how it is done (as for jut about anything in DVD SP there is more than one approach )

How to Make Dreamweaver CS4/Flash CS4 Website Function on all Latest Mobile Devices

Hello!
I am trying to add code into my Dreamweaver CS4 file and/or Flash CS4 file in order to have the website I have created work across all of the latest mobile devices as well as traditional online systems. My flash file has a transparent stage, and my dreamweaver file has a full-screen background image. I have reviewed various tutorials and articles available online, and some advocate simply adding code, which does not seem to be working for me, while others suggest having a similar separate site created solely for mobile devices. If this is the best option, I don't know how that should be set up. What is the best path to take with this?
This is the collection of various pieces of code I have tried adding to my files:
<meta name="viewport" content="width=device-width" user-scalable="yes" initial-scale="1.0" /> 
   <meta name="HandheldFriendly" content="true" /> 
</style>
   <param name="allowScriptAccess" value="sameDomain" />
      <param name="allowFullScreen" value="true" />
<param name="allowScriptAccess" value="sameDomain" />
        <param name="allowFullScreen" value="true" />
        <param name="var params = {          id: "flashID", name: "flashcontent", menu: "false", allowFullScreen: "true", fullScreenOnSelection: "true", scale:"noscale", salign:"middle"};"
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
//or//
this.stage.scaleMode = StageScaleMode.NO_SCALE;
this.stage.align = StageAlign.TOP_LEFT;
next_btn.width = 133 * .5;
next_btn.height = 133 * .5;
//flash//
next_btn.width = Capabilities.screenDPI * .5;
next_btn.height = Capabilities.screenDPI * .5;
//flash//
this.stage.addEventListener(Event.RESIZE, doLayout);
//flash://
<initialWindow>
   <width>320</width>
   <height>480</height>
   
</initialWindow>
* Convert inches to pixels.
private function inchesToPixels(inches:Number):uint
   return Math.round(Capabilities.screenDPI * inches);
var button:Sprite = new Sprite();
button.x = 20;
button.y = 20;
button.graphics.beginFill(0x 003037);
button.graphics.drawRect(0, 0, this.inchesToPixels(.75),
   this.inchesToPixels(.25));
button.graphics.endFill();
   this.addChild(button);
//hard-code title://
var titleBar:Sprite = new Sprite();
titleBar.x = 0;
titleBar.y = 0;
//stage width determines width of title://
var titleBar:Sprite = new Sprite();
titleBar.x = 0;
titleBar.y = 0;
titleBar.graphics.beginFill(0x003037);
titleBar.graphics.drawRect(0, 0, this.stage.stageWidth,
   this.inchesToPixels(.3));
titleBar.graphics.endFill();
this.addChild(titleBar);
//footer://
var footer:Sprite = new Sprite();
footer.graphics.beginFill(0x003037);
footer.graphics.drawRect(0, 0, this.stage.stageWidth,
   this.inchesToPixels(.3));
footer.graphics.endFill();
footer.x = 0;
footer.y = this.stage.stageHeight - footer.height;
this.addChild(footer);
* Center one DisplayObject relative to another.
private function center(foreground:DisplayObject,
   background:DisplayObject):void
      foreground.x = (background.width / 2) -
         (foreground.width / 2);
      foreground.y = (background.height / 2) +
         (foreground.height / 2);
//cont.//
var title:SimpleLabel = new SimpleLabel("My Application",
   "bold", 0xffffff, "_sans", this.inchesToPixels(.15));
this.center(title, titleBar);
this.addChild(title);
//override width and height getters
public override function get width():Number
   return this.textLine.textWidth;
public override function get height():Number
   return (this.textLine.ascent - 1);
if (Capabilities.manufacturer == "Android Linux" && Capabilities.screenResolutionY == 1024)
next_btn.width = 85;
next_btn.height = 85;
This is the code for my Dreamweaver CS4 file (without the additional erogenous code attempts):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE html PUBLIC "-//WAPFORUM//DTD XHTML Mobile 1.2//EN"
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>My Website Title and Slogan.</title>
<style type="text/css">

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<body>
<img src ="image.gif" width=90% height=auto>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<meta name="Keywords" content="keywords…" />
<div align="center"></div>
<div align="center">
<p> </p>
<p>
    <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="900" height="630">
      <param name="movie" value="FlashFile.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="transparent" />
      <param name="swfversion" value="6.0.65.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      
      
      <object type="application/x-shockwave-flash" data="FlashFile.swf" width="900" height="630">
        
        <param name="quality" value="high" />
        <param name="wmode" value="transparent" />
        <param name="swfversion" value="6.0.65.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object>
</p>
</div>
<div align="center"> </div>
<script type="text/javascript">

</script>
</body>
</html>
I have tried various combinations of the code listed above, but nothing seems to be working. I am not sure as to the positioning of the code, and maybe that is the problem, or maybe it is because this code in not for CS4, or not appropriate for my project. I also do not know what code should be inside the Flash file, nor what should should be inside the Dreamweaver file.
Thank you in advance for any assistance!

Hi
To add to what Gramps has said, Adobe has ceased developing its flash player for ALL mobile devices so do not use Flash for any mobile device.
Depending on the complexity of your Flash program you may be able to recreate it using Edge, but the code generated by Edge does not work in IE8 or below.
For details on Edge, see - http://labs.adobe.com/technologies/edge/
PZ

How to Make Flash CS4/Dreamweaver CS4 Website Function on all Latest Mobile Devices

Hello!
I am trying to add code into my Dreamweaver CS4 file and/or Flash CS4 file in order to have the website I have created work across all of the latest mobile devices as well as traditional online systems. My flash file has a transparent stage, and my dreamweaver file has a full-screen background image. I have reviewed various tutorials and articles available online, and some advocate simply adding code, which does not seem to be working for me, while others suggest having a similar separate site created solely for mobile devices. If this is the best option, I don't know how that should be set up. What is the best path to take with this?
This is the collection of various pieces of code I have tried adding to my files:
<meta name="viewport" content="width=device-width" user-scalable="yes" initial-scale="1.0" /> 
   <meta name="HandheldFriendly" content="true" /> 
</style>
   <param name="allowScriptAccess" value="sameDomain" />
      <param name="allowFullScreen" value="true" />
<param name="allowScriptAccess" value="sameDomain" />
        <param name="allowFullScreen" value="true" />
        <param name="var params = {          id: "flashID", name: "flashcontent", menu: "false", allowFullScreen: "true", fullScreenOnSelection: "true", scale:"noscale", salign:"middle"};"
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
//or//
this.stage.scaleMode = StageScaleMode.NO_SCALE;
this.stage.align = StageAlign.TOP_LEFT;
next_btn.width = 133 * .5;
next_btn.height = 133 * .5;
//flash//
next_btn.width = Capabilities.screenDPI * .5;
next_btn.height = Capabilities.screenDPI * .5;
//flash//
this.stage.addEventListener(Event.RESIZE, doLayout);
//flash://
<initialWindow>
   <width>320</width>
   <height>480</height>
   
</initialWindow>
* Convert inches to pixels.
private function inchesToPixels(inches:Number):uint
   return Math.round(Capabilities.screenDPI * inches);
var button:Sprite = new Sprite();
button.x = 20;
button.y = 20;
button.graphics.beginFill(0x 003037);
button.graphics.drawRect(0, 0, this.inchesToPixels(.75),
   this.inchesToPixels(.25));
button.graphics.endFill();
   this.addChild(button);
//hard-code title://
var titleBar:Sprite = new Sprite();
titleBar.x = 0;
titleBar.y = 0;
//stage width determines width of title://
var titleBar:Sprite = new Sprite();
titleBar.x = 0;
titleBar.y = 0;
titleBar.graphics.beginFill(0x003037);
titleBar.graphics.drawRect(0, 0, this.stage.stageWidth,
   this.inchesToPixels(.3));
titleBar.graphics.endFill();
this.addChild(titleBar);
//footer://
var footer:Sprite = new Sprite();
footer.graphics.beginFill(0x003037);
footer.graphics.drawRect(0, 0, this.stage.stageWidth,
   this.inchesToPixels(.3));
footer.graphics.endFill();
footer.x = 0;
footer.y = this.stage.stageHeight - footer.height;
this.addChild(footer);
* Center one DisplayObject relative to another.
private function center(foreground:DisplayObject,
   background:DisplayObject):void
      foreground.x = (background.width / 2) -
         (foreground.width / 2);
      foreground.y = (background.height / 2) +
         (foreground.height / 2);
//cont.//
var title:SimpleLabel = new SimpleLabel("My Application",
   "bold", 0xffffff, "_sans", this.inchesToPixels(.15));
this.center(title, titleBar);
this.addChild(title);
//override width and height getters
public override function get width():Number
   return this.textLine.textWidth;
public override function get height():Number
   return (this.textLine.ascent - 1);
if (Capabilities.manufacturer == "Android Linux" && Capabilities.screenResolutionY == 1024)
next_btn.width = 85;
next_btn.height = 85;
This is the code for my Dreamweaver CS4 file (without the additional erogenous code attempts!):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE html PUBLIC "-//WAPFORUM//DTD XHTML Mobile 1.2//EN"
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>My Website Title and Slogan.</title>
<style type="text/css">

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<body>
<img src ="image.gif" width=90% height=auto>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<meta name="Keywords" content="keywords…" />
<div align="center"></div>
<div align="center">
<p> </p>
<p>
    <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="900" height="630">
      <param name="movie" value="FlashFile.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="transparent" />
      <param name="swfversion" value="6.0.65.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      
      
      <object type="application/x-shockwave-flash" data="FlashFile.swf" width="900" height="630">
        
        <param name="quality" value="high" />
        <param name="wmode" value="transparent" />
        <param name="swfversion" value="6.0.65.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object>
</p>
</div>
<div align="center"> </div>
<script type="text/javascript">

</script>
</body>
</html>
I have tried various combinations of the code listed above, but nothing seems to be working. I am not sure as to the correct positioning of the code, and maybe that is the problem, or maybe it is because this code in not for CS4, or not appropriate for my project. I also do not know what code should be inside the Flash file, nor what should should be inside the Dreamweaver file.
Thank you in advance for any assistance!

There is no simple code to add that will display the same on all mobile devices....
you do know that the iProducts (iPhone, iPad, etc) don't display Flash at all, right?
So as a start for "functioning on all latest mobile devices" you should drop any Flash content you have and move on.
Adninjastrator

How to make Library Update work with XFL format

Hi, all. When you keep your Flash file as a fla, it remembers where bitmap and audio files were so that if you edit the original file you can easily pull in that update by selecting the library icon, right-clicking, and selecting "Update." However, when you use xfl, that gets broken. I think the theory is that you are supposed to be able to dig through the library folder and be able to update the file there. However, in the case of audio files, there's not actually anything in the library directory, so you can't really do that.
Is there a way that I'm missing to let you easily update bitmap and audio library assets with xfl? Is there a setting somewhere I should be setting that would enable my library assets to "remember" where they were imported from after the file is closed and reopened? Note that I'm still on cs5.5 for the most part, because I feel like it's more stable than CS6 and definitely more stable than the CC versions, but I have also had this problem in CS6.

"However, in the case of audio files, there's not actually anything in the library directory, so you can't really do that."
I don`t remember how xfl was handled in older versions, but in CC the LIBRARY folder that you see inside your XFL File is an exact mirror of the LIBRARY Folder that can be found on your HD where the xfl file is located.
So any Sound that you imported in your xfl file will be copied to that specific folder. And updating that file will automatically update it in your LIBRARY, so there is actually no need anymore to "update" your assets via the context command.
(Windows 7-64bit)

Flash video game. How to make it playable & put onto website, and Indesign PDF file?

I am making a video game using Adobe Flash 2.0. I need to be able to show what I have through a website (my portfolio) and/or insert it into an interactive Indesign PDF file. The game needs to be able to be played and be used and tested by whoever I send the pdf file to, or whoever is would be view my the site I post it on. I have attempted many different ways to put my game onto my website (cargocollective) and Indesign, but nothing is working! I need help.
For example I need my game to be placed on the website page, and on the pdf document as an image. When it is clicked on I need it to start so people can play the game. I don't know how to do this and I would really love and need to know how! Thanks.

You are more likely to get a helpful reply if you ask this in the Flash forum (this is the Flash Player forum).

How to make small change in old "finished" project

I'm now working in PPCS3. I want to retitle, but no other changes, a project I did 2 years ago in PP2. I have the MPEG2 output of that project, but did not keep the source material and prproj file. I do have the background clip for the title. I could put the old MPEG2 on the timeline of a new project, overlay the new title material at 100 opacity and fade it to the original at its end. This would be easy to do, but would the bulk of the project suffer noticably from rerendering the already compressed MPEG2 material? I could do the title piece as a new project, but can't figure out how to chop off the front-end title seconds from the original MPEG2 to join it up with the new title segment. Are there any other options, and any advice on which way to go?

From Harm's reply, I guess I didn't make one question in my plea clear. Forget the reference to "title" footage, is there a utility that will modify an m2v file to remove a selected number of video frames at one (front) end? I realize one or two compression cycles would have to be redone and would suffer. Second question, could such a utility replace the removed frames with a new m2v segment? To do the compression at the "splice" there would need to be overlap and again the quality of that splice region would suffer a bit, but the rest of the m2v would be in "new" condition. For what its worth, my original m2v was done with CBR encoding and I have several still frame segments of a second or more which should be OK for the splice, if it is possible at all.
Thanks for your constructive comment, Jim.

How to make small updates to a website

Similar Messages

Maybe you are looking for