How to make software component available inside IB (Design)

I have created a product/component version in SLD. But I cannot see it in IB. What did I miss ?

Hi
After creating the product/component in SLD u have to import them into IR.
Go thru this link to do that
http://help.sap.com/saphelp_nw04/helpdata/en/9c/7a973ca83a4601e10000000a114084/content.htm
Regards
Arpit Seth

Similar Messages

How to make the table scalable inside a tap control?

Hi,
Does anyone know how to make the table scalable inside a tap control in LabWindow CVI? I see that there is option for a panel to scale contents on resize, but not available for a tab control. Any ideas?
Thanks a lot!
Weiming
Solved!
Go to Solution.

Hi SGIE,
you have posted a LV-related question to the LabWindows/CVI forum: you should post it in the LabVIEW forum instead.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to delete Software Component in XI ?

Hi,
I have created a Software component with a NameSpace Containing Some Scenarios. Now i would like to delete this Software Component as a whole from the IR.
I tried deleting :
1.From the SLD Software catalog - Deleted the s/w product and associated component , it was deleted in the SLD s/w catalog but no effect in the IR Side.
2.Deleted all the XI Objects and NameSpace in IR , but still empty software component exist in IR.
Any help in this Regards will be appreciated...

See this
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Prateek

How to make a service available at boot.

Can someone tell me how to make a service available at boot time via smf ? The question is for a generic service ( network/telnet for example ) and for a site one.
Is it enough to enable it via svcadm ?
Thanks.

yeah all you need to do is
svcadm enable /network/telnet
this will enable the service then and next time when you boot the system
(or i.e. svcadm disable apache2 if you want to disable the httpd)
have you tried man on svcadm?
Sharif

How to make iPhotos library available to other users

how to make iPhotos library available to other users

To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support article linked below.
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

How to delete Software Component from IR.

Hi Experts,
I have imported Software component from SLD in Integration Repository. How to delete Software Component from Intetegration Repository. Does it possible?
Thanks
siva

1. Design:Integration Builder
Double click on the Software Component Version
In the display window, navigate the menu to Software Component Version and select Delete
This removes both the Software Component and the Software Component Version
Ensure that the Change List is empty
2. SLD
Double click on the Software Component and select the Remove button
3. Clear SLD Cache
You may want to go back into the Design:Integration Builder, navigate the menu to Environment and select Clear SLD Data Cache
cheers,
Naveen

How to delete Software Component Version From I.R

Hi,
Any Body tell me how can i delete Software Component Versions From Integration Repository there is no delete option showing on Right click. i already deleted dependent components thanks in advance.
Thanks
kiran.B

Hi Kiran,
Check this blog. It is stating how to delete SWCV :
<a href="/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder:///people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Subhasha Ranjan

How to make software select on UI

May I know how to make software select. just click down the mouse and drag, then there will be a dot line square. After release the mouse,
the things selected will change color to red.
When move mouse over one object on UI, the mouse icon with change to the one with 4 arrow to 4 direction. If click down, the object will change to red color, other red
color object will back to normal color.
Any suggestion, thanks.

As the attached vi, when in runtime, the selected 4 object need to change color. Or the click one need to change color. Thanks.
Attachments:
ss.JPG ‏67 KB

How to make software

I was wondering if apple has a program or maybe some software that I could get to learn how to make software.
Please respond.
Thanks

Random Man,
Look on that install CD/DVD that came with Mac OS X. On it, you will find a whole lotta (unbelieably awesome) developer tools and info on becoming involved with Apple's developer programs.
However, iTunes U and Apple's ADC (the "Apple Developer Connection") are really different things. This forum (for iTunes U admins) is so totally the wrong place for your question. Apple has very easily found forums for programming questions ... you're way better off looking for them.

How to make some computers available on the Internet? Remote Desktop.

We have 12 computers (VMs) that are used for training. They are configured with the software to be trained on and are set up just the way we want them. We are looking for a way that we can make these computers available to the internet so that someone can Remote into the VMs to go through some training courses. We do need to be able to control who can get onto these machines so we don't have random people logging into them. We handle training through a GotoTraining type system and would provide a link to each of the attendees.Does anyone know if a way to do this?It could be as simple as a list of 12 links that we tell each person to click a link. It could be as fancy as having the person click the link and having them put into any machine that doesn't already have someone in it.This could involve installing some sort of 3rd party...
This topic first appeared in the Spiceworks Community

Hi,
Beforing answering your Q....How the dashboard will get the data....how it will display??
See to diplay any Grid,charts,bar..... it need to fetch the data from the database servers that means if your in netcafe also .......it need to be connected to the netwrok were it can fetch the data from.
so having the link is not sufficient ....... you need to have the authorization to the xMIIserver from Net cafe.
Regards,
Phani

How to make the portal available on default port 80

Hello
We have installed 9iAS 9.0.2 with portal.
I'm trying to make the portal available on http port 80 via webcahce
I've managed to get the webcache answer requests that comes on port 80, but all the url's that is delivered out is pointing on port 7779.
If i copy the url's and remove :7779 from it, i still get the page that it points to.
I don't want to open for any ports except for 80 in our firewall.
How can i configure webcache not to deliver url's that points to port 7779?
Regards
Per-Jarle Sfther

Refer :
7 Component Configuration Dependencies
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1008620
Web Cache
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1016697
3.2.2 MIDTIER OPCA Mode
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgbasic.htm#1008246
- Senthil

How to delete Software Component in Repository

Hi forum,
I have a software component in repository,
i have deleted all nameSpaces inside it,
how can i delete the Software component from the Repository,
thanks

Hi Sudeep,
Select particular software component and In right side of window, select software component in menu and select delete option.
Regards,
Prakash

How to make Steam library available for all users

Hello!
Can someone tell me - how to make my Steam library available to ALL users of my iMac without sharing a password?
Or any other program of my account?

Hard drive level Users/Sharing - Do a Get Info on the folder (command - I) and set permissions to everyone read/write, then click the gear at the bottom - Apply to Enclosed Items.

How to change the component styles (inside panelFormLayout.)

Hello friends,
Can anyone help me, How to change the component styles where components (af:inputtext) inside af:panelFormLayout.
i changed all of the components one by one style, inlinestyle .. from the inspector. By result is nothing.
how to extend blafplus-rich and override some of the components style?
thanks for your helps

thanks alright but i want to learn again after this.
Which component has a content or border or how can i find list components attributes for change style?
For example i want to change document content pane, what will i write to css. i am little knowledge about css.
Thanks for help

How to make software component available inside IB (Design)

Similar Messages

Maybe you are looking for