How to make Solaris 8 UNICODE supported

My Solaris 8 doesn't support UNICODE. That's why, I can't write � in a file.
I think UNICODE support will remove this problem
How to make Solaris 8 UNICODE supported.

In the initial "dtlogin" screen, select a "UTF-8" locale when you login.
You may have to install additional locale files for UTF-8 support from the Solaris "Languages" CD.

Similar Messages

Hi Experts.. How to make scripts & SmartFrom Unicode enable

Hi Experts..
How to make Scripts & Smart From Unicode enable? i know for scripts we need to check with driver program &
For smart from we need to check the generated function module. Correct me if am wrong.
I wanna to know how to make layouts & from Unicode conversion....or enable??
Thanks In Advance
Santosh.S
Points for sure ...

Hi Donghai,
Have you tried using the command
CHAIN ENDCHAIN.
Try displaying the message for te field you wish to within CHAIN and ENDCHAIN which will allow you to enter the data in the field even after the error message is displayed.
Caution: Mention all the field names in CHAIN and ENDCHAIN which you want to be open for enterin the values into it.
Thanks and Regards,
Kunjal Patel

How to configure solaris 7 to support unicode(Arabic)

hi all,
I have a problem in configuring solaris 7 to support Unicode(Arabic). Anyone know about this pls give me the guidelines to configure the environment variables, etc.,
-Thameem.

hi all,
I found out the solution. Its working properly.
-Thameem

How to make Crytstal Report Viewer support with Khmer Unicode Font

Dear all,
I'm using Visual Studio 2010, and Crystal Report 13.
I'm searching for 2 months about cannot render Khmer Unicode font on Crystal report, but I have no result.
Please tell me the way to render Khmer Unicode font well.
I'm looking for your reply soon.
Thanks.
Edited by: sochinda on Mar 25, 2011 10:47 AM

Sochinda forget about what K wrote. You can not use the crviewer.dll (also known as active X viewer) - of any version in any version of .NET.
1) It is not supported - in any and all versions of CR
2) With some versions of CR, you are breaking your license agreement; CR 9.2, 10.2, 10.5, CRVS2010 (13.0)
Please do see the link Don provided. Also see my blog here:
/people/ludek.uher/blog/2009/09/23/use-of-the-report-designer-component-rdc-in-vs-net
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Jun 7, 2011 8:13 AM

SLA 7.1 ZMIN - How to make automatic Product (Hotline Support) assignment

Hello Experts,
I have SLA configured, and now I'm wondering how I can make Product assignment automatic for ZMIN message?
Currently I have to assign the product (Hotline Support) manually for each of ZMIN messages.
Is there any way to do it automatically when ZMIN message created?
Thanks,
123

SOLMAN123 wrote:
Hello Experts,
>
> I have SLA configured, and now I'm wondering how I can make Product assignment automatic for ZMIN message?
>
> Currently I have to assign the product (Hotline Support) manually for each of ZMIN messages.
>
> Is there any way to do it automatically when ZMIN message created?
>
> Thanks,
> 123
Hello, check this blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
It is fot 7.0 EHP1 but in part of product assignement it may be helpful.
Also check this guide: https://websmp105.sap-ag.de/~sapidb/011000358700000122472008E/SERVDESK_VAR_ADV-E_V6.PDF

How to make sure client will support 1.5 applet?

Hello All....
We have an applet that's using the latest technology, 1.5. We're also using a 3rd party applet that's using earlier technology. When we bring up our web page on a virgin windows platform, the 3rd party applet appears with no problem. Ours though doesn't appear at all unless we manually install the 1.5 runtime. How can we make that install automatic? Or at least make our applet 'know' it wont work. Thanks,
Curt

corlettk wrote:
I haven't got a clue RE your problem other than for max-portability you should compile with [-target 1.5|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html].
I must say I'm impressed, except I suspect my PC must be substantially faster than any of your test platforms... can you throttle it to CPU performance somehow? Or maybe it's just that my reflexes aren't what they once where.Thanks.
There seem to be two issues. The first is what people are using. This web stats shows pretty poor penetration of 1.6.
[http://www.statowl.com/java.php|http://www.statowl.com/java.php] Penetration: 54% with JRE1.6 + 19% with JRE 1.5. Total 73%.
The second is I've read that mac and 1.6 do not get along except on a 64bit platform.
So for applets there is not much choice but to compile on 1.5 for the broadest user base. I guess the good news is 1.4 and earlier are almost non-existent.
Edited by: Darrin.A on Apr 27, 2009 8:11 AM

How to make exit class unicode complaint

Hi Experts,
I am trying to make class of category 'Exit class' unicode complaint as it shows me error message as "The program "ZCL_EX_DEF_STP_GATEWAY========CP" is not
Unicode-compatible, according to its program attributes."
But in properties section whenever I try to check unicode flag it shows message as
"Exit classes/interfaces can only be edited using the BADI Builder".It do not allow.
Is there any way to make it unicode complaint?

hi Yogesh,
Try to use SE18 and see if there is any option for this.
Regards,
Vivek

How to make the Installer place support files in specific folder

Hi,
I'm trying to use the LabVIEW2009 installer for the first time. I haven't used any earlier ones, so my understanding is limited. I have created a project and an executable and wish to direct the installer to place some groups of files in a number of directories other than the one in which the executable goes. On the Source Files page I can see a number of Folder descriptions in square brackets. I don't understand how to use these. Are they to be set up to point to specific directories? If so how?
So far I have managed to create an installer which puts all the support files from the project in a single directory. My attempts to select a subset of files within the Project View window and place them in a separate directory were not allowed since they are treated as an indivisible group. Basically i don't know enough about the installer and my searches for information have only yielded very basic information.
If anyone can help by supplying or pointing to more detailed information I'd be most grateful.
Thanks
George
Solved!
Go to Solution.

Hi George
This is from the LV help:
Destination View—Specifies the location and directory structure of the files when they are installed. Select an item from the Project View tree and click the arrow button or drag the file to the Destination View tree to include it in the installer directory structure. You can drag multiple files at the same time. Click the buttons below the Destination View tree to add, remove, and rename folders in the directory. You also can right-click the folders and select a command from the shortcut menu.
The folders in the Destination View directory that do not have an LV prefix correspond to Microsoft Installer (MSI) properties that install files in the following locations.
[CommonAppDataFolder]—Files you include in this folder install to the Application Data folder.
[CommonFilesFolder]—Files you include in this folder install to the Common Files folder.
[DesktopFolder]—Files you include in this folder install to the Windows desktop of the current Windows user.
[LVxxRTEDIR]—Where xx is the LabVIEW version currently in use. Files you include in this folder install to the folder of the Run-Time Engine for the LabVIEW version currently in use.
[LVDIR]—Files you include in this folder install to the folder of the LabVIEW version currently in use.
You can find a full list of the MSI properties here. Scroll down to "System Folder Properties"
Best Regards
David

How to make Solaris 10 Operating System 11/06 CD install onto a PC

I have the Solaris 10 Operating System 11/06 CDs from Sun.
I am now trying to install the O/S onto a new internal HDD.
Powering up with the first CD (03-104927-01) in the drive, the monitor reports "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER".
Is not the CD a system disk?
How do I install Solaris from the CDs?
Additional information:
BIOS Setup information:
IDE Channel 0 Master - HDD
IDE Channel 4 Slave - DVD
Thanks for the help

In your first post you discuss CDs (plural) as if you have the 4-disk or 5-disk set.
You do mention that the optical drive is a DVD.
Now you describe the optical media as being DVDs.
In the future, you need to be precise with details if you hope for `remote` assistance, such as in an Internet discussion forum.
I can only guess that your desktop computer's drive just has some occasional issues with various media.
Perhaps it is old and has issues reading the specific position where DVD boot sectors might be.
Booting from media has no relationship with what might already be installed.
Your laptop is likely newer with a fully capable drive.
That laptop optical drive might be better able to read DVD boot sectors.
I see two alternatives left to you.
Replace the drive, even if only temporarily with a borrowed drive...
else...
Download and burn the CD variety of Solaris.
[http://www.sun.com/software/solaris/releases.jsp]

How to make Mac 8.6 support PCL 5e printer.

I share HP1100 printer in windowsXP. My mac 8.6 install the HP 1100 printer. But the printer is PCL 5e. I how to install the printer in Mac 8.6.
thank you very much for your help.

Disable the firewall in the Security & Privacy preference pane.

How to make Creative Suite Cs5 support touch screen conection

I paid over $600 dollars to be able to have all of the creative suite 5 and now that I have a touch screen that I can work off of it seems like I being told that you have to pay a monthly fee just to be able to work on one of the five programs I already paid for on my tablet. Huge oversight and I need to know if there is a way to make it work with windows 8 computer/tablets that doesn't have wacom feel technology.

Then what about cs6 which is the newest software that does not have a monthly fee to use I do not mind upgrading to newer software but I hear that cs6 has issues with it too and no one from Adobe could give me any guarantee that it would work if I did upgrade. And I refuse to pay a monthly fee just to use one program on my touch screen when I have already paid for over five that work just fine otherwise. To say that there is no way to plug it in is absolute ignorance I refuse to believe that a program built to be expanded on and upgraded with different plug ins and brushes can not be coded to work with a touch screen maybe they wont bother with cs5 but what about cs6. Not only that touch screens where around since 1990's and in 2007 the first multi touch screen was introduced its not that they weren't around its that Adobe refused to incorporate them with their software and now that they are more common Adobe is cashing in with a monthly fee.

How to know whether my oracle 10g instalation in unicode supported or not

Hi
i am new to oracle. I have installed Oracle 10g client and server.
I want to know whether the database created can store unicode data/arabic data.
Please guide me how can i find whether unicode support is on for my db or not.
The outputs of some of the queries run by me are as follows:
SQL> HOST ECHO $NLS_LANG;
$NLS_LANG
SQL> HOST ECHO %NLS_LANG%;
%NLS_LANG%
SQL> @.[%NLS_LANG%];
SP2-0310: unable to open file ".[AMERICAN_AMERICA.WE8MSWIN1252]"
SQL> select cust_eng_name,cust_arb_name from custmast;
select cust_eng_name,cust_arb_name from custmast
ERROR at line 1:
ORA-00942: table or view does not exist
Please reply me asap.

user10817093 wrote:
1. Yeh that is the thing I want. What are the other steps that i need to do with my Oracle Client/Server for unicode support.
Where i am getting trouble is the Oracle Client/Server unicode support.
And how to decide what character set will suite me best.1. If your application is going to be a "true" Unicode application, you can set the NLS_LANG registry/environment setting on your clients to ".UTF8" to enable true Unicode support.
2. Your database needs to support Unicode, too.
The recommended database character set for this in 10g is "AL32UTF8".
If you currently have a single-byte database character set (WE8MSWIN1252), you need to decide how to get this done.
If you can simply create a new database using the "AL32UTF8" character set, this would be the easiest way.
There are several documents available (e.g. on Oracle MetaLink) that describe in detail how to convert the character set of an existing database. Depending on your data this can be a tedious task involving several steps, so may be creating a new database and exporting/importing the data might be the simplest choice if you need to migrate some existing data.
The recommended national character set is "AL16UTF16", by the way, but that shouldn't matter that much once you have a Unicode enabled database using "AL32UTF8" as database character set.
2. How to set/retrive the "Database Character Set" and "National Character Set". This has already been answered partly. Retrieve:
Database Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';National Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_NCHAR_CHARACTERSET';In most of the cases you can't just simply set/alter the character sets, as outlined above.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Make pdf report that support unicode

Hi all.
I'm new in Flex.
I want to start an application In flex,But I have some doubt.
How can make some report (in pdf Format)that support Right To left language with Unicode Support?
And Has Flex any Component for it?

Sochinda forget about what K wrote. You can not use the crviewer.dll (also known as active X viewer) - of any version in any version of .NET.
1) It is not supported - in any and all versions of CR
2) With some versions of CR, you are breaking your license agreement; CR 9.2, 10.2, 10.5, CRVS2010 (13.0)
Please do see the link Don provided. Also see my blog here:
/people/ludek.uher/blog/2009/09/23/use-of-the-report-designer-component-rdc-in-vs-net
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Jun 7, 2011 8:13 AM

How do I get rid of a few Internet sites, namely: Firefox is not supported? How to Make Firefox supported for these sites?

Firefox does not support some web sites?
How to Make Firefox supports these sites?

Firefox does not support some web sites?
How to Make Firefox supports these sites?
This URL
# http://e-imamu.edu.sa/emam/login/admin/CheckUserRegistrationAction.do
# http://www.moi.gov.sa/wps/portal/!ut/p/c1/pY_RCoIwFIafKHY2t-mtztSlOSFW5o3sImKQGhE9f1oQFLiCzrn8_v9wPtSgcXtzs0dztUNvTqhGDW-ZqIQM1h5OK-0DSXy6EjwPgOGR73lbKqITKjEO-BID4RmNiq2ENPZ-ab-4KrMYJORxVChFaMr_aQP70t5NrvMJ6j25y23iMDMhfNx__y8X1Mkf9i4--bk4YajMhu6ANuaCzp3WNVhp5SK8A3BThH0!/dl2/d1/L0lDU0NTSUpKSkNncFJBISEvb0VvUUFBSVFKQUFNWXhpbElNNExnbWNBL1lCSkp3NDU0NTAtNGtzbHl0dyEhLzdfNUNQQ0k4TTMxT0Q0NTBJMFVGUkRVTDEwSDcvamF2YXguc2VydmxldC5pbmNsdWRlLnBhdGhfaW5mby8lMFRyYWZmaWNWaW9sYXRpb25zVmlldy5qc3A!

How to make servlets reloadable in iplanet web server in solaris??

hi all,
does anyone know how to make servlets reloadable in iplanet ??? Thanks for help

Hi there,
I think your question is about "Dynamic Class Reloading", also named as Hot deployment. and the following lines may be helpful.
iAS 6.0 SP3 and later version supports new hot deployment features through dynamic class
reloading of EJBs.By default, dynamic servlet, EJB and registered JSP reloading is disabled in iPlanet Application Server.
To enable dynamic reloading of servlets, EJBs and registered JSPs, perform the following steps:
1.Start iPlanet Registry Editor, kregedit, and modify the Disable value under the Versioning key:
SOFTWARE/iPlanet/Application Server/6.0/CCS0/SYSTEM_JAVA/Versioning
2.Set the Disable value to 0 (By default, the Disable value is set to 1)
3.Restart iPlanet Application Server to enable the change
To hot deploy your application, simply compile and replace the file in the appropriate directory or, use iasdeploy to redeploy
applications.
I recommand you to check out the iAS's release notes (http://docs.iplanet.com/docs/manuals/ias/60/sp3/rn_sp3.html#20766) for more infomation.
Good luck
Shen Jie
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How to make Solaris 8 UNICODE supported

Similar Messages

Maybe you are looking for