How to make something like this in Edge Animate?

Hi,
I'm hoping to make something like this – https://www.youtube.com/watch?v=OJeDppEHI1g – in Edge Animate but I'm not sure where to start.
I'm new to Edge but am keen to explore.
Anyone have any feedback on whether:
1. It's possible, and
2. What techniques/effects have been used.
Thanks!

Hi there and welcome,
Could you be a little more specific on what it is exactly that you would want to create? Most of what I can see from that website is doable in Edge Animate, but if you specify what it is you'd like to accomplish I could walk you through how to do it.
Thanks!

Similar Messages

How to make something like this

This is a starbucks commercial :
http://www.youtube.com/watch?v=0xAwKBywrEk
I've got a few questions :
- Do you think this is done in Motion? After Effects or Flash or...?
- What technique is used in this clip? ( I really like how the graphics 'join together' in each frame and the next frame, like it never ends. <-- How do you call that? )
- If I know nothing about Motion and I want to make something like that commercial. ( Make it 15 secs maybe ) How should I start? ( Illustration first? ) And what techniques should I look at?
Please help I want to make an advert like that for part of my Major Project to promote recycling...

hi,
this is all doable in Motion.
I would start by designing the film on paper, draw rough sketches of each scene and think about how they might fit together. Then I'd start creating the graphical elements. This could be done in Illustrator, photoshop or directly in Motion, it depends what you are trying to achieve. Once you have all your graphical elements, and a rough idea of how it will work then you can start building it.
good luck
adam

How Could I Make Something Like This.

http://www.youtube.com/watch?v=vlRdjAwEzbU
I Am Wondering How I could make something like this in AfterEffects CS4.
Any Help Would Be Appreciated.

dx394 wrote:
Is There A Tutorial Anywhere About It?
You could contact the animator or whoever posted the clip.
Deconstruct the sequence. observe the moves and decide, with your present level of familiarity, how you would approach it. Scaling of the ten or so different layers is simple enough but acquiring the contents of the layers is not something you will do in AE.
As Todd says, start small, figure it out one step at a time, move on to more advanced functions. Animting 3D layers is 9 times more difficult than 2D. when you add lighting and camera moves you raise the complexity level and rendering time to another power making your project about 27 times more difficult.
bogiesan

Anyone know how to create something like this?

I've been asked to make something like
this
except for newsletters instead of business cards. If anyone
has seen any tutorials covering anything like this I would love to
hear about them, or if you have some ideas of how to start.
I tried using image swap for the background and writing over
it using layers but realized I wouldn't know which background they
chose and the text on the layer won't move to accomidate each
template. Is this something that needs to be done in Flash? Any
advice would be greatly appreciated.
Thank you in advance,
Chris

This page appears to be done with javascript and ASP.net. The
coding
involved is not for the beginner or the timid.

How do yah make something like this?

I'm trying to make simething like this. However I'm stuck on what sort of algorithm would be used. Any idea? Thanks a bunch in advance for any help!
http://i91.photobucket.com/albums/k293/rawlehypermode/Untitled.jpg

You meant something like this ?
import java.awt.Dimension;
import java.awt.Graphics;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class LineDemo extends JPanel {
    final static int SIZE = 640;
    final static int STEP = 20;
    protected void paintComponent(Graphics g) {
        for (int i = 0; i < SIZE; i += STEP) {
            g.drawLine(i,0,SIZE,i);
            g.drawLine(SIZE,i,SIZE-i,SIZE);
            g.drawLine(SIZE-i,SIZE, 0, SIZE - i);
            g.drawLine(0, SIZE - i,i,0);
    public static void main(String[] args) {
        JFrame frame = new JFrame("Line demo");
        frame.add(new LineDemo());
        frame.setPreferredSize(new Dimension(SIZE+STEP,SIZE+2*STEP));
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setVisible(true);
}

Sony, please tell me how you allow something like this to happen? Horrific Support Experience

So, the below happened. Essentialy, Sony sent me four broken TVs, forced me to spend about 20 hours of time replacing those TVs, and has refused to replace my broken television. The below is a chain with one of your reps. I would never have expected such a poor customer service experience from a company of Sony's caliber. It has been very disappointing. You insist that you are giving me an "offer" but you have given me no options whatsoever.
I note that you continue to maintain that there is no viable replacement. However, a simple search on your webpage and online shows that there are multiple 48 inch LED televisions still available. I find your representation to be disengenuous. The below chain is only one point in the long line of frustrating communications with your representatives. All told me different things and made promises that were not kept. I can only imagine how my case file looks.
I would like an explanation from Sony how you could allow something like this to happen? This has been the most frustrating experience I have ever had with a electronics company -- and I have had alot. It has been terrible.
---------- Forwarded message ----------
From: []
Date: Fri, Jun 26, 2015 at 7:22 PM
Subject: Re: [] *Mark*
To: Sony Support USA <>
To be clear, I am not "accepting" your offer as I don't think it is fair or makes me whole. I am telling you to do whatever you have to do. You have given me no real other options.
On Jun 26, 2015, at 7:04 PM, Sony Support USA <> wrote:
Hi [],
Thank you for contacting Sony and for accepting the offer. We apologize that we cannot offer you the regular retail price of the unit since that is not the amount that you paid it for. We will email you a prepaid shipping label which you can use to ship us back your TV and once we determined that it is in transit back to us we will process the check with the amount of $369.99 and you will receive the check in 4-6 weeks. Thank you.
Regards,
Mark C7NO
Sony National Customer Relations
From:[]
Sent: Friday, June 26, 2015 9:20 PM
To: Sony Support USA
Subject: Re: [] *Mark*
How you get away with treating your customers like this is beyond me. I am telling you that I purchased the television at a discounted rate that I am no longer able to obtain. In other words, the amount you are refunding me will not make me whole. I am also telling you that your colleague literally offered me a refurbished TV about two hours ago (apparently your group offers less to customers now). You have already sent me three TVs and wasted about 20 hours of my time. Despite all that, you unapologetically state that your "FINAL" offer gets me to nowhere that I need to be. You have no remorse for the situation and have not gone any extra distance to make a customer whole, which is all that I am asking for.
You have beaten me into submission over the past month with broken TVs, hours wasted shipping, long conversations with support representatives, and failed promises. You guys go ahead and do whatever it is you need to do. There is only so much that I can argue about. No customer should expect this type of treatment from a company like Sony. People purchase Sony so that they DONT have to deal with that type of nonsense. This has honestly been the worst customer service interaction I have ever had.
On Fri, Jun 26, 2015 at 5:54 PM, Sony Support USA <> wrote:
Thank you for contacting Sony. We double checked if there is a same or comparable refurbished unit for replacement but there is none. Your file is being already being handled by our department which is the highest level you can get since our managers and supervisors are not part of the escalation path. The $319.99 is the amount that you paid for the TV and that is what we are going to refund you and the $50 is for compensation. You are getting more than what you paid for the TV so Sony believes it will cut it. Our offer is FINAL. Thank you.
Regards,
Mark C7NO
Sony National Customer Relations
From: []
Sent: Friday, June 26, 2015 8:38 PM
To: Sony Support USA
Subject: Re: [] *Mark*
Mark,
I just spoke to an individual on the phone who told me that you could send a refurbished model . That conversation is exactly what prompted my email to this email address -- they told me to reach out here because you could provide me a better option rather than the two that were given. Now you are telling me that not only can you not offer me a better option but that you are taking away an option previously given. This is getting more and more ridiculous. I am sorry but this just isnt working for me. I dont understand how there is this much miscommunication between your departments.
I would like to be put in touch with a manager on this case. Your offer to refund me 320 + 50 will not cut it. I am amazed that a company like Sony, which people purchase because of the supposed product support and service, is failing their customer in this way. It's very disappointing.
On Fri, Jun 26, 2015 at 5:30 PM, Sony Support USA <> wrote:
Hi [],
Thank you for contacting Sony. Like we mentioned from our last email, the best and final offer is the buyback. If you don’t like the offer then we don’t have any other option for you. Thank you for choosing Sony.
Regards,
Mark C7NO
Sony National Customer Relations
From: []
Sent: Friday, June 26, 2015 8:10 PM
To: Sony Support USA
Subject: Re: [] *Mark*
Thanks, Mark. My preference would then be to try a refurbished model one more time. The issue is that I got the TV at Black Friday discount. I wouldnt be able to replace it even if I wanted to. So, I will try one more time and go from there. Please let me know once the TV is shipped.
On Fri, Jun 26, 2015 at 4:21 PM, Sony Support USA <> wrote:
Hi [].
Thank you for contacting Sony. We apologize if you don’t want that option but this is the best Sony can offer since there is no same or comparable model to offer you anymore. If the unit will be replaced it will be the 4th time already and to tell you honestly it will be much cheaper for you to just buyback the unit rather than to pay the shipper deliver the TV every time we replace it and we are not saying that it is your fault just to make it clear. We will buyback the unit for $319.99 and we will add up another $50 as compensation for all the troubles. Please let us know once you have made your decision. Thank you.
Regards,
Mark C7NO
Sony National Customer Relations
From: []
Sent: Friday, June 26, 2015 7:16 PM
To: Sony Support USA
Subject: Re: [] *Mark*
I don't want that option. I would take a refurbished model again over the refund.
You are saying that I spend 20 hours of my life dealing with you, driving to and from fed ex three times, mounting and taking down three broken televisions, and you do nothing to compensate me for my time? I would never expect this from a company like Sony.
On Jun 26, 2015, at 4:10 PM, Sony Support USA <> wrote:
Hi [],
Thank you for contacting Sony. As we have mentioned there is no same or comparable model to offer you that is why we offered a buyback for the unit and that is the only option thank you.
Regards,
Mark C7NO
Sony National Customer Relations
From:
Sent: Friday, June 26, 2015 7:05 PM
To: Sony Support USA
Subject:
As I said, I don't want a buy back. That is not an option for me.
Are you saying that you have no other 48inch led television?
On Jun 26, 2015, at 4:02 PM, Sony Support USA <> wrote:
Hi [],
Thank you for contacting Sony. We apologize for the inconvenience this may have caused you. Since there is no same or comparable model to send you as a replacement we will buyback the Tv for $319.99. We will email you a prepaid shipping label for you to return the unit back to us and once we determine that the unit is in transit we will process the check and you will receive it in 4-6 weeks. Should you take the offer please provide the address where the check should be sent to. Thank you.
Regards,
Mark C7NO
Sony National Customer Relations
From:
Sent: Friday, June 26, 2015 6:49 PM
To: Sony Support USA
Subject:
Over the past month, you have sent me four defective TVs. I cannot tell you how frustrating this process has been for me. I never would have thought that a company like Sony could be this bad. It has been like pulling teeth with you all.
I purchased my television thinking that it would come along with the best product and support in the market. That has not been the case. My TV broke down within a year and now you have sent literally four televisions to replace it but none of them have worked.
The latest contact I got was that you have run out of new television for my model and instead need to send me another refurbished one or refund me. I do not want either option.
I want a brand new TV. I dont care if it's the same one or a better one but it has to be new. It cannot be refurbished. I do not want a refund.
At this point, I have spent about 20 hours of my life on the phone with you or shipping back and forth items. I would also like compensation to account for that time.
Please email me or call me with a response.

Hi adam26,
Welcome to the Sony Community!
We certainly empathize with your frustration and we apologize for the inconvenience caused. Please check your other thread here, we saw someone from our customer relation department already responded to your inquiry. Again, we sincerely hope to seek your kind understanding on this matter.
Regards,
Dave

How To Do Something Like This?

Hi i wanted to know how to do this carousel effect in flash
http://gallery.mac.com/emily_parker#100347&bgcolor=black&view=carousel&sel=0,
is it possible i can steal this code and put it in flash so i can
use my own images, if i can, how would i go about doing this.
Plz if some one can help i'll be more than grateful
Thanks in advance Everyone
Raph

Did I say getting ideas was bad? No. Are they here asking
anyone if they want the source to their file? No, so I don't
consider that 'sharing things'.. Aside from emailing the webmaster
of that site and asking if you can have their source, there is no
ethical way of getting it. Like I said, it's not very hard to
google "flash carousel" and return so many hits that you won't know
what to do with yourself. However, if you want to just come around,
steal, and have others do all your work for you, then I'll preach
all I want, hopefully until you leave these boards.

How to script something like this for navigating PDF?

I am looking something similar to this:
We have this but is not working in Acrobat X:
// Add navigation buttons to the page
// This script puts 3 buttons on top of every page (except the first one that has one button)
// First button "<" : takes to the previous page
// Second button: "1" : takes to the first page of the document
// Third button: ">" : takes to the next page in the document (does not exists on the last page)
var inch = 72;
try
    nLastPage = this.numPages - 1;
    for (var p = 0; p < this.numPages; p++)
        var x = 0.5;
        if (p > 0)
            AddButton(p,x,0.5,0.25,0.25,"PrevPage","<","Previous Page","this.pageNum--;"); // left arrow, previous page
            x += 0.3;
        if (p != 0)
            AddButton(p,x,0.5,0.25,0.25,"StartPage","1","Go To First Page","this.pageNum=0;"); // "1", takes to the first page
            x += 0.3;
        if (p < nLastPage)
            AddButton(p,x,0.5,0.25,0.25,"NextPage",">","Next Page","this.pageNum++;"); // right arrow, next page
            x += 0.3;
        AddButton(p,x,0.5,0.25,0.25,"Back","<<","Go Back","app.execMenuItem(\"GoBack\");"); // right arrow, next page
        x += 0.3;
catch (e)
app.alert(e);
// AddButton function creates a button with given parameters and action
function AddButton(nPageNum, x, y, width, height, strText, strCaption, strToolTip, strAction)
    var aRect = this.getPageBox( { nPage: nPageNum} );
    aRect[0] += x * inch;
    aRect[1] -= y * inch;
    aRect[2] = aRect[0] + width * inch;
    aRect[3] = aRect[1] - height * inch;
    var f = this.addField(strText,"button", nPageNum, aRect);
    f.setAction("MouseUp",strAction);
    f.userName = strToolTip;
    f.delay = true;
    f.borderStyle = border.s;
    f.highlight = "push";
    f.textSize = 0; // autosized
    f.textColor = color.blue;
    f.strokeColor = color.blue;
    f.fillColor = color.white;
    // you can specify a different font here, otherwise it uses a default one
    //f.textFont = font.ZapfD;
    f.buttonSetCaption(strCaption);
    f.delay = false;

The original post and some of the subsequent replies are referring to a Heads-up display (HUD). There's a HUD displayed when Adobe Reader X or Acrobat X enter Read Mode:
However the HUD image in the original post is not from Adobe software, it's from the inbuilt PDF helper in OS X Safari.
You cannot script the HUD, nor can a document force a user to enter Read Mode. It's used by default when viewing PDFs within a Web browser using Reader X, but has to be manually-selected in desktop mode.
The script in the original post adds buttons onto every page of the currently-open PDF. It is NOT designed to be embedded as a Document-level script, but should be run from the console or from a folder-level script (for example as part of a batch process or Action). Once created, the buttons are permanent - there is no need to generate them dynamically, and the code will not work in Adobe Reader unless the PDF file has extended forms rights.
The code as posted above works perfectly in the Acrobat console, so if you're getting a script error you haven't copied and pasted it properly. Once it's run and the buttons have been created, just save the file. Do not embed anything!

How to create something like this?

Hi, i am curious on is this been created? Is it textarea
component? but the picture shows that the usernames can be
highlighted when mouse Over, also there are small buttons functions
like add to Friend List. Any tips?
PICTURE

That looks like a item renderer in a List component

Can iMovie make slideshows like this?

I assure you, I am not a shill for this company. I'm just impressed with the slideshows they can put together and want the tools to make one myself.
Can iPhoto 08 provide the tools to make something like this finished product:
http://urltea.com/1zrt
(multiple photos in a single frame)

mil8 wrote:
... Can iPhoto 08 provide the tools to make something like this finished product: .. .
no.
and iM either..
these are those typical 'options packed' PC-made shows, my ex-father-in-law likes to impresss me with.. you stare at the effects, but don't 'see' the content anymore..
anyhow:
prepare your pics before use in iPhoto/iMovie, to show more than one.. (not exactly , what you want, but look at my example here)
or, purchase a bunch of plug-ins from geethree.com (plug-ins are only avail for iMHD6!), to teach iM zillions of new transitions..
or, have a look at 3rd party 'slideshow makers' as PhotoMagico or Photo2Movie ..
... but two tumblin' on all axis cubes, showing 12 pics, simultanously seen on a screen.. ? a rare attemp for Mac apps..

How difficult would it be to create something like this?

I'm looking to create a flash widget similar to what WoW has
on their main page -
http://www.worldofwarcraft.com/index.xml
It needs to have images & text that could be called from
a php or text file, so that it can be dynamically changed. Movies
will also be integrated in the rotation as well for the Flash.
How difficult would this be for someone who's new to flash?
How long would it take and what all is needed to learn how to
re-create something like this?

The difficulty and time to do it depends on the learning
capability of the new programmer. Patience and a drive to learn is
what all is needed. Accomplishing one step at a time is probably
the best approach, whether you're new or well-versed.

Where are my photos on the PC after sync with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this?

Where are my photos on the PC after synching with an iphone? I know nobody out there is stupid enough to suggest to me that they are encrypted and inaccessible, right? Seriously? How stupid would Apple corporation have to be to do something like this? That would be just as foolish as making my music unusable on the PC...
Okay, Let's assume that Apple is indeed THAT foolish.......How does one get the photos from the phone to the PC and still use them?

The photos are still on your phone, and if enabled in your Photo Stream. They are not automatically transferred to your computer when syncing.
See iOS: Import personal photos and videos from iOS devices to your computer and iCloud: My Photo Stream FAQ
tt2

Is possible to have a script that makes a text randomly have caps and lower caps... i would love to create a kind of effect so it would look like manuscript - but it cannot be only the same letter in caps or lower caps - I wOuld NeEd oF SOmeTHing LikE Thi

Is possible to have a script that makes a text randomly have caps and lower caps... i would love to create a kind of effect so it would look like manuscript - but it cannot be only the same letter in caps or lower caps - I wOuld NeEd oF SOmeTHing LikE This (random) - is it possibel?

Hi,
Sample with 2 regex:
Launching the 1rst regex:
Launching the 2nd regex:

I was wondering how you would do something like this?

Hi i was wondering how you would do something like this?
i recently got photshop CS5 and wanted to do something like this!

Not sure exactly what the effect you are looking at, but my first glance is just an overly of 3 or more pictures. The portrait in the back is just like 50% transparency.

How to make something similar in 3d? (tv graphics, no only compositing topic!))

Hi, I am aware that this is community for After Effects, and also this example contains some objects probably maded in some 3D programs, but I want to hear opinion form an expert how exampes below are did:
These are examples from one tv station i Europe:
I am curious how it is made:
http://www.youtube.com/watch?v=QBrQ7krzrVw (please watch only begin and the end of this video)
http://www.youtube.com/watch?v=j9pU_XIJQqA (especially from very end of video clip-cubes)
I want to know way how to make something similar and how to composite them like this way?
Any links related to tutorials, links for similar techniques (c4d, max...?)
What is your opinion about modeling this scene?
Thank you!

It will probably take some 3-D modeling. Bringing it into AE, I will point you to Andrew Kramer's Element 3D plugin - http://www.videocopilot.net/
He has one demo that is doing a very similar effect -- http://www.videocopilot.net/tutorials/element_animation_engine/

How to make something like this in Edge Animate?

Similar Messages

Maybe you are looking for