How to make Sony DSC M1 transfer MP4 file into iphoto6 automatically ?

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera and iphoto .
When I plug this camera into computer , iphoto will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to iphoto automatically both photo and video ?
At this moment , I do this manually by drag files from that folder ( /MP_ROOT/101MNV01/ ) into iphoto .
This problem also bother me while I am using iPod + Camera connector to transfer the file when I am out for the traveling .
pls , help me , thanks a lot

Here's the link:
http://www.sony.ca/xdcamex/software.htm
hope this helps--

Similar Messages

New zen 8GB ( transfer mp4 file into the device )??????

i just bought the new zen 8GB .i wanted to transfer my mp4 file which i had formated .. but i failed to transfer it into my device ... can anyone tell me how can transfer my mp4 file into my device ?thank you ....

Send it back to Amazon for a replacement - they have the best return policy/service in the business.

How do you convert a swf or mp4 file into flv using creative cloud programs?

I am trying to embed a video as HTML5 with Flash fallback into my Dreamwaver site and only have the swf file of the video.
Please let me know if you have any ideas about how to convert a swf or mp4 file into flv, without loosing pixels and quality of the swf file.
Thank you!

If you have MP4 video, you can use Pickle Player which has built-in Flash fallback for Mozilla. No conversions required .
http://www.pickleplayer.com/
Nancy O.

How to transfer mp4 file to iphone 5c

how to transfer mp4 file to iphone 5c?

The codec of the .mp4 file should be H.264 or MPEG-4.
If you think it’s difficult to understand, you can use the iPhone PC Suite to transfer the .mp4 file to your iPhone 5c. The software will automatically convert the video file to iPhone supported format before transfer.

How to transfer input file into XI through sender file adapter

Hi
I am quite new to XI. Want to know how I can transfer a file into XI through sender file adapter. I dont have any input file, so I have to create a sample input file and I want to transfer that into XI. Can you please advise me of the steps involved in that. I have finished work in design and directory, now I want to push file the sample file into XI. The receiver adapter is an IDoc adapter. And also a very trivial question. How I can place my sample file into my source directory. Thanks

Hi Rajiv,
If your transport protocol is NFS then you need to put the file in the XI server. Because it becomes the Network File System. For that you can just type the ip address of the XI server in the "run" command or in the browser with "
" then in any of the Folders you can paste your file. But ensure that this is the path you give in your Sender File Adapter.
If your transport protocol is FTP then you need to see that ftp is running in your system. for that go to Control Panel>Add/Remove Programs>Add/Remove Components. In that check the IIS server and go to details and see that ftp is also checked. Now ftp is running in your system.
Now open your C:> drive >InetPub>ftproot . and create a folder here and paste your file. In the configuration of your File sender adapter just mention the name of the folder.
For your information, you can create a file with xml tags and namespace and message type manually (or) you can directly get it from the test tab of message mapping and generate source code.

How to Make Itunes Recognize Foreign Characters in file names?

How to Make Itunes Recognize Foreign Characters in file names?
Any Body, please
DELL Windows XP Pro

That's not how it's supposed to work according to this: http://www.griffintechnology.com/support/italkpro/
By default, a playlist will be created in iTunes called "Voice Memos" and those files will be transferred there automatically. The files themselves can be found on your computer in your iTunes Music folder in Unknown Artist > Unknown Album.
It may be worth working through any trouble shooting articles on that site.
Regards,
Colin R.

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes to convert CDs to Apple loselss?

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes convert CDs in Apple loselss? The difference between 256 (VBR) and Apple Losless is very clear...

Dear Michael, good day!
1. As per your instruction, I turned off iTM.
Small discrepancy – where are two screens with iTM switch:
-Settings > iTunes & App Store.
-Settings > Music
I switched OFF in both.
NB: I turned device to English for convenience.
2. My next step was Setting > General > Usage – tapped {Music};
{All music} screen appeared; I swiped it and taped Delete.
3. I performed “hard reset” …………………………………..
4. Switched back On iTM
5. Taped Music app on Home screen
iTM has started – (it took 18 minutes to completed, 60 mbps Wi-Fi speed )
Regret to inform… All the same:
Erase and reset to factory default? Or I did smf wrong?

How to make an openfiledialog? (browse a file and put it in a parameter)

How to make an openfiledialog? (browse a file and put it in a parameter)
Best Regards

hi,
check the code below:
FORM sub_gui_download.
* Define local variables
DATA:
    lo_fullpath       TYPE string,
    lo_filename       TYPE string,
    lo_path           TYPE string,
    lo_user_action    TYPE i,
    lo_encoding       TYPE abap_encoding.
* Define local constants
CONSTANTS:
    lc_encoding(1) TYPE c VALUE 'X',
    lc_directory TYPE string VALUE 'D:',
    lc_filetype TYPE char10 VALUE 'DAT',
    lc_separator TYPE char01 VALUE 'X',
    lc_blank TYPE char01 VALUE ''.
* Call method to create dynamic save_path and save_format
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      with_encoding        = lc_encoding
      initial_directory    = lc_directory
    CHANGING
      filename             = lo_filename
      path                 = lo_path
      fullpath             = lo_fullpath
      user_action          = lo_user_action
      file_encoding        = lo_encoding
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Check user_action
IF lo_user_action <> cl_gui_frontend_services=>action_ok.
    EXIT.
ELSE.
*   If user_action equals to action_ok, call function module to download datas
*   using download table i_dwn_tab
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = lo_fullpath
        filetype                = lc_filetype
        write_field_separator   = lc_separator
        trunc_trailing_blanks   = lc_blank
      TABLES
        data_tab                = i_dwn_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    IF sy-subrc <> 0.
      MESSAGE i007.
    ENDIF.
ENDIF.
ENDFORM.

How can I change a Microsoft Word document file into a picture file?

How can I change a Microsoft Word document file into a picture or jpeg file? I am wanting to make the image I created my background on my macbook pro.

After I had the document image the way I wanted it, I saved it as a web page and went from there. Below are the steps starting after I did the "save as" option in Word:
1) Select "Save As Web Page". I changed the location from documents to pictures when the window came up to save it as a web page.
2) Go to "Finder" on you main screen, or if it's on your main toolbar at the bottom.
3) Click on the "Pictures" tab and find the file you just re-saved as a web page. (I included "web page" or something similar in the new title so I could easily find the correct file I was looking for)
4) Open the correct file and then "right click" on the actual image. (Use 2 fingers to do so on a Mac)
5) Select 'Use Image As Desktop Picture", and voilà! The personally created image, or whatever it is that you wanted, is now your background.
**One problem I encountered while doing this is that the image would show up like it was right-aligned in relation to the whole screen. The only way I could figure how to fix this was to go back to the very original document in Word, (the one before it was saved as a web page), and move everything over to the left.
I hope this helps someone else who was as frustrated as I was with something that I thought would have been very simple to do! If you have any tips or suggestions of your own, please feel free to share. : )

TA22875 Why can't I drag MP4 Files into Imovie?

I'm trying to frag MP4 files into I Movie and when I release the mouse it just returns them to where they came.

OK
We here are not Apple or employed by them - the thoughts and wisdom of Apple is very occult to many of us !
We are as You - Users and trying to be of help for other users !
The thing is - I don't know about Codecs, and please take this the right way when I say - I'm not interested in Codecs.
I just want to drag my movie files taken in whatever format I take them in and drag them into Imovie to work on them.
mp4 is a fairly common format?
then I have very little possibility to be of help - as I only can guide You a bit of the way to understand and work around this Problem - I never denied it to be.
But it seems that every Camera company makes there own solutions and to make Video editing programs or DVD authoring ones that can use every strange Video Codec availably - is impossibly - Not even FinalCut or Avid or Adobe Premiere can do this.
.mp4 - is no more Video Codec as any folder or hard disk - and tell that my material is on a hard disk, doesn't help us in understanding where it goes wrong.
So if You want to get this to work - then You need to set of a minimum of interest in howto get it right.
To find out the Codec
• Open the file with QuickTime-Player (as it can open many many more Codecs than iMovie can use)
• here open Inspector [cmd+I] and read
Video Format (Codec) : nnnnnnnnnnnnn
Frames per second : YY.yy fps
What does they say ?
If You feel offended and don't want - There is no solution as I know of.
AND - I have no intention to offend at any cost - but need info (and so does the others here too) to be able to reach out a hand
Yours wanting to be of more help - Bengt W

Can't open a video .mp4 file into CS6

How do I load an .mp4 file into Photoshop CS6 from Bridge? I followed the video tutorial from Adobe - http://helpx.adobe.com/photoshop/using/new-video-features-photoshop-cs6.html - which says to load them into Photoshop as layers and I keep getting an error message in Photoshop that says I have to select 2 videos. So I selected 2 videos and still get the same error. I don't know what else to do.
I've also tried from Bridge to select the .mp4 file then go to File > Open with > Photoshop CS6 and I get the following error - Could not complete your request because it is not the right kind of document.

Nancy O. wrote:
Sounds like you're trying to import the wrong file type. You can't import MP4.
Video import formats
MPEG‑4
MP4 is MPEG-4, which is on the import list you provided.
It's a container format, so I expect whether Photoshop opens or rejects an MP4 will depend on the codec(s) of the contained media.
MP4 containing H.264 video and AAC audio, probably the most commonly used codecs in MP4, certainly open in Photoshop CS6 and play for me.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

How can i convert a window media player file into a format playable on ipod

hey guys can you tell me how can i convert an widdow media player file into a format that can be played on my ipod, i used videora ipod converter but it can't convert the window media player file

the program you show change wma to mp3, but the mp3 file can't be understanded by the iPod, how can i change a wma file to a format understanded by the Ipod?

How do I get iTunes to accept FLAC files into the library?

If I want to use iTunes to catalog FLAC files (but NOT play them...as I use my logitech Squeezebox fior that) how do I get iTunes to accept FLAC files into the library?

As polydorus notes, iTunes has the huge shortcoming of not handling FLAC.
There are plugins that allow iTunes to play FLAC, but everything I've seen says they are problematic.
A much better approach is to get a 3rd party conversion program such as Switch and convert the FLAC files to an iTunes-compatible format such as AAC or AIFF.
Put the converted files in your iTunes library, and keep the original FLACs on hand for when you are using a more capable player.

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

How to make Sony DSC M1 transfer MP4 file into iphoto6 automatically ?

Similar Messages

Maybe you are looking for