How to make stereo sound play also from rear speakers on X-

X-Fi is excellent card. Just one question though (CMSS 3D disabled, 5. speakers set correctly): when I play stereo file (like MP3) the sound comes only from front speakers. Well it's logical of course but my old Audigy duplicated the sound also to rear speakers (the center speaker wasn't used) - so is it posible also on X-Fi to play stereo music from rear speakers too without enabling CMSS?

Actually I just found out that this CMSS3D is VERY good way to expand stereo to 5. (although it's not what I originally meant) - so no need to reply me but I'll welcome any opinions anyway.

Similar Messages

How to make a self-playing DVD from FCP project of 75 minute film.

A Quicktime film has been made in Final Cut. It is about an hour and 15 minutes long. It needs to end up on a self-playing DVD.
Maybe this is a question for the FCP boards (or for DVD SP, which I don't know well): What's the approach to get this project to DVD?---having it look best on the DVD. Are there compression best practices?

Or you may be able to make a Kiosk mode DVD from a QT file / folder using iDVD. (btw ...I've done this successfully thru iDVD6 but I have not yet tried it under iDVD08):
http://discussions.apple.com/thread.jspa?messageID=4764361&#4764361
Please note that this approach is the only way I know of to make a DVD (w/in iDVD) that plays by itself and with no menu whatsoever. Hence the DVD will always play in a continuous loop until you press stop or eject on the remote. Or if you prefer you can also use Roxio Toast which has a similar feature.

How to make a sound play after I complete a download in safari

I am just wondering if there is a way to make a sound go off after I successfully complete a download in safari 5.0.5.
If anyone can help, I appreciate it!

I do not think there is one actually. You could always look through the Safari Extention Gallary (https://extensions.apple.com/) and see if there is a 3rd party one you could use.

How to make report with access 2010 from SharePoint Discussion lists 2013

HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
Santhiya

Hi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support

How do I transfer my play lists from one pc to another? I can't find import on the new version.

How do I transfer my play lists from one pc to another? I can't find import on the new version.

Holtey wrote:
Not an option.
Onlly have turn on home sharing or get artwork
Do ou have the iTunes menus showing across the top of the iTunes window?
ctrl B

How to make separate/individual text frame from one parent frame in indesign with javascript

Hi all,
Please suugest - how to make separate/individual text frame from one parent frame in indesign with javascript.
Thanks
Rohit

@Larry – ah, your interpretation could be the right one…
May I rephrase the question:
"How to split threaded text frames to single ones?"
"SplitStory.jsx" or "BreakFrame.jsx" under Scripts/Samples indeed could be the answer.
From the comments in the code of "BreakFrame.jsx":
//Removes the selected text frame (or text frames) from the
//story containing the text frame and removes the text contained
//by the text frame from the story.
//If you want to split *all* of the text fames in the story, use the
//SplitStory.jsx script.
Uwe

How to make a pattern in illustrator from a placed image ?

how to make a pattern in illustrator from a placed image ?

Just embed the image and make a swatch of it.

How to make it sound as if it is in the next room.

I am new to the audio editing/mixing.
I am curious how to make dialog sound as if it is happening in the next room.
I vaguely remember a setting that was doing something like it and it was actually called similarly (In the next room), but now I can't find it.
If it doesn't exist and it was one of those borscht induced nightmares, how one would approach this anyway?
Thanks a lot in advance.

In the effects rack, there are several "room" settings you can apply, and tweak the parameters to make it sound as if it's in the same room or next door.

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

I have a stuck CDR disk in my MacBook. I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
The case can get bent down by picking it up with your thumb pressing down on the case above the slot.

Soft sound from rear speakers while playing mov

Hi,?Gaming and music is done via all speakers (i'm using analogue connection) just fine, but when i play a movie (using powerdvd 6?deluxe) i get faint sounds from the rear speakers. I had contact with creative's help desk in my country and we ran thru all system settings (e.g. thnx console). Everything was configured correctly., tho still a weak sound from rear speakers. They could not help me further ?I'm using a x-fi fatality soundcard with a logitech z-5400 speakerset.
When running a movie it shows a logo near the system tray : dolby digital. I am hoping one of u has a solution to this problem. Greetz,?Nask

In most of the cases, movies with mutichannel soundtrack do not use constantly every speakers. I think your case is normal and that's only your DVD's mix (as many DVD) that concentrates more on the front. try some of the sample there: http://www.digital-digest.com/dvd/do...s/trailers.phpIf the first one sound at the same level for each speakers then it's alright.

Sound from REAR speakers o

Hi,
I have a SB Audigy 4 and a Cambridge SW 5. speaker system running on Windows XP SP2. I recently re-OSd my system and everything was working fine. I was in the middle of a web-cam call and all of a sudden the sound disappeared. I have a Logitech QuickCam, and I understand that its software can interfere with the surround speakers (usually by disabling the rear speakers). Anyways I unistalled all the Logitech software, but still no sound.
I uninstalled and reinstalled my Creative drivers multiple times, and all I can get is sound out of the rear speakers. Nothing out of the front or centre speakers. The AudioHQ speaker test only has sound coming out of the rear. Also, when I play music (e.g. mp3s) it comes out of the rear speakers as well (I thought this was odd as usually stereo sound comes out of the front speakers doesn't it's)
Anyways I've tried switiching the front and rear speakers, and the front speakers work out of the rear channel, so it's not that. I don't know what else to try. I've checked all the connections, etc and nothing. Anyone have any ideas?
Thanks

Have you checked that the cables are mounted OK (i.e. is cabling OK in speaker system ... try by using stereo connection for every pair at once ... connect rear channel cable(s) into X-Fi front output ... connect center/sub into front output) ... are these OK.
Propably you could switch those rear/cent-sub cables as a temp. solution but, would it be a resolution ... well, it's up to you?
Are your sources stereo (i.e. you need to use CMSS to convert stereo signal to multichannel)?
BTW, I had similiar issue in my Audigy 2 card before latest driver update.
jutapaMessage Edited by jutapa on 06-06-200703:24 PM

No sound from Rear Speakers - Center Channel Works F

I have a Windows Vista (brand new) system, with an X-Fi XtremeMusic card on board. Connected via the digital i/o dongle is an Onkyo TX SR-605 receiver, which in turn is hooked up to a 5. Polk Audio speaker setup. The 5. setup works fine?for all other components on the receiver. That said, it doesn't seem that there's much or any sound coming from the rear speakers when it's playing the computer setup. When I use the THX speaker setup utility it correctly identifies the right, left, center, and sub, but then announces that the front right and left speakers are the rear right and left speakers. Any idea how to fix this?

All the sudden I got the similar problem with Logitech Z-5500 with optical out...test with THX Consol and no sound coming out of rear Speakers instead front R and L.......update to latest driver but problem remains....

Muffled sound from rear speakers (t7700)

I hooked up new T7700 speaker set up to my new Audigy 2 ZS Gamer and when i watch movies or play games i hear nothing from my rear speakers. if i put my ear right by them then i hear that there is sound coming from them but very quietly.
side front and center work fine any ideas?

That would be normal for a 5.1 system, rear is very discrete.
Use the speaker test and you should hear the level increase. or use cmss to play cd music to back 2 speakers.
[edit] sorry didnt see the bit with side speakers.
Select 5.1 instead of 7.1
if you still want to use 7.1 then check the settings in the decoder bit and look at where you are mapping the speakers to. like in a 7.1 speaker configuration map 5.1 content to etc\
For 5.1 movies use the rear mapping, or the side mapping,
if you want all the speakers on then select the side and rear option then whatever sound you get from the speakers will be a bonus.
Message Edited by dontasciime on 01-20-2005 10:06 AM

Headphones usage on Satellite A660-BT2G22 -sound plays out of the speakers

When I plug headphones into my Satellite A660-BT2G22 Laptop the sound plays out of the speakers and the headphones.
There has to be a way for me to make the sound play only through the headphones and I would really love that because I am going off to college soon and will have a roommate and I will want to listen to my own music and stuff and not force him to hear my stuff all the time.
Please help?

This notebook model is not known to me but check control panel and option for some audio manager there. On notebooks with Realtek sound card there is Realtek HD Audio manager.
Check all options there, especially small folder symbol placed at the right top side. When you click on it connector settings window will be open. Enable auto popup dialog.
Now, every time when headphones will be connected you can choose headphone as only device you want to use.
Please check it out.

How to make stereo sound play also from rear speakers on X-

Similar Messages

Maybe you are looking for