How to make sure Bridge Mode is OFF on my new TC

When I go into Airport Utility for my New TC, Network, Router Mode the choice is OFF(Bridge Mode). Does this mean the Bridge Mode is off?

Alex_Tiny wrote:
I have read through your posted thread and you clearly state that TC, AC version cannot be set up using your method. I have the AC version so it won't work for me.
Eggman worked out in the thread how to do it.. So follow his section.. which is the same but using v6 utility.
So my question is can I just shut down the Bridge Mode, and set all the details so I can udate the TC with the new DNS numbers.
You can put the TC in router mode.. dhcp + nat and try it..
I do not know if it will work but the problem is, you will then have other issues.. so even if the dns is correct other things won't be.
Double NAT is the issue.. so it depends on if you can move the main router to the TC instead of the current router.
Please do try the other method.
Also, it is way too complicated for my inexperienced pea brain. I am retired and pretty much isolated here with very little outside help available.
You have lots of time.. try every method.. just reset if you mess up and start over. You cannot hurt anything.. indeed you can export your current setup in airport utility so you can restore it easily.
Take your time and make up a proper log and try different settings..
I found it hard to change DNS.. what the company refers to as many people with TC and extreme running this setup unfortunately you really have to work from where you are. If your TC shows DHCP + NAT then bridge is off.. and you have full router and you can play to your hearts content with dns settings.
Tell us what the make and model of the modem you have now.
Give us the current dhcp setup of the modem.. ie the range of IP's and DNS settings.

Similar Messages

How do you make sure internet is switched off with the new iso7. In iso6 you pressed the centre button twice and it allowed you to close down open tabs I want to do the same....or go back to is06

How do you close down the internet in ISO7

You do the same thing, but now your open apps are displayed in a window view. Swipe left/right to find the app you want to stop, then swipe the app up to remove it. By the way, this doesn't turn off the internet. It only removes the app from memory that may be accessing the internet.

I have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??

You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.

My order for ipad mini canceld it self !! how to make sure my money will be returned ?

i'm kinda angry , they did't even send me an email about the cancelation !!
no how can i make sure my money will be returned !?

1. Delete the iCloud backup
2. Make sure your passcode is OFF on iPhone
3. Make a new iCloud backup

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect". I checked to make sure IE is not off line. Any suggestions please?

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?

Try using a different browser as a test.

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

I just upgraded to the new 4, but not sure how to make sure all my apps (purchases) get over to the new phone from iphone 3. can't seem to find instructions. thanks.

I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.

Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109

How to draw a perfect circle and how to make sure it is perfectly centered inside a square

How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.

1. Create a square canvas.
2. With the Elipse tool, hold down Shift (Shift forces a circle). Draw the circle anywhere on the canvas (Shape 1 in this example).
3. Simplify the circle layer
4. Ctrl-click the layer to select the circle.
5. Copy the selection to the clipboard (Edit > Copy).
6. Deselect the selection.
7. Paste from the clipboard (Edit > Paste). The pasted circle (Layer 1) will be centered.
8. Delete the original circle layer.
NOTE: Step 6 is the key. This guarantees that the pasted circle will be centered.
If you want a circle completely within a square you can simply draw and simplify a circle on any shape canvas. Ctlrl-click the circle to to select it and copy to the clipboard.
Then do File > New from Clipboard. This creates the circle cropped to a square on transparent background.

How to make sure that schema name is not included with generated sqls

How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanks

The full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

HT200131 how to make sure only my laptop can connect to my apple tv?

I don't want to see my flatmate apple tv under "connect"
how to make sure I don't click on his tv accidentally and he won't be able to connect mine?
thank you!

Hey J-Justin,
Great question! You can name your Apple TV to differentiate it from others in the AirPlay list:
Apple TV: Change the name of your Apple TV - Apple Support
http://support.apple.com/en-us/HT200028
Furthermore, you can setup an onscreen code or password to restrict access for AirPlay. The password method sounds like the best option for your setup:
Apple TV (2nd and 3rd generation): Understanding AirPlay settings - Apple Support
http://support.apple.com/en-us/HT202618
Set a password
Go to Settings > AirPlay > Security > Password > [set password]. You can use this setting to require a password for AirPlay-enabled devices to connect using AirPlay on the Apple TV. Use this setting if your device will need permanent access and you only want to enter the password once.
Thanks,
Matt M.

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

I think a few pictures speak a thousand words. I try to get creative and design some pages in landscape mode.
This is how the TOC looks like in landscape. As you can see there is a chapter and many pages. I didn't use sections to make sure that they don't appeared as a list in TOC page.
This is how Chapter page looks like.
But when viewed in portrait mode. nothing appeared.
How shall I make sure that at least the text in chapter page goes there?
Thanks!

If I add a text box, it does not seem that inline is an option.
When I create the chapter page, the bottom part is empty, but I do not know how to add text. If I add a text box, it is not inline.
I hope to be able to add inline text which appeared at the bottom, possible?

MacBook Pro 15" 2007 is dead. How to make sure it's the left I/O board?

My 15" 2007 MacBook Pro is now completely dead. No light on the 85W magsafe (which does work on unibody MBP 15), battery completely empty, no sign of life whatsoever. Apple Store says I need a new "logic board" but could not specify which one, main or left I/O. How can I make sure it is the left I/O board?
The computers' power circuits have been steadily declining in recent months. It has a checkered history - it's the one that ran hot, had kernel panics due to graphics card drivers, and had the graphics card hardware issue. The computer died in October 2008 and "the logic board" was replaced under Apple Care, free of charge. When AppleCare ran out I bought a unibody MPB and my son inhereted the 2007 model, using it for his music and being pretty happy with it, until the battery would not charge anymore. He then ran it on the power supply only, until it would not boot up. Apple Store did some magic with it (probably reset SMC), it ran for a while longer without charging battery, then did the same thing (not booting, but magsafe connector showing green LED). Searching on the web I found some hints as to how to reset SMC and this worked - once. Took the computer off the magsafe when going on a holiday, when I came back it had deceased.
Apple Store quoted $ 540 for a logic board replacement. The left I/O board is available online for $ 119 and I am able to mount it myself, would do so if I could make sure that this unit has failed and not the main board. And that, friends, is my question.

Let the Apple folks - or an AASP - run diagnostics on the machine. They'll be able to tell if you need a new logic board or not. Get an estimate - if it seems outrageous then it's probably time to buy a new computer.
Just my 2¢...
Clinton

[Resoved] How to make sure numeric entry is accepted before saving.

Running LV 2010. I have an application in which I talk to some hardware via the USB. Values are stored in the EEPROM inside the hardware. I have a screen that shows these variables as floating point numbers, and allows the user to change the variables as needed, then save to the device. The problem I have is that, if I change a number, and while the numeric field still has focus, I click the save button, the program saves the previous vaue. It's as if the value was not entered. If instead, I click off of the newly entered number in the middle of the page somewhere, then click save, it saves the new number. In the save button routine, I have tried changing the focus to the save button, then "waiting" 10mS for the display to update, then saving, but this does not work. How do I make sure the screen has accepted the change before I do the save? Thanks.

Care to enlighten us so that we can avoid making the same mistake?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to make sure 2 Variables of same class do not share internal variables?

K, I am having trouble making a new instance of an object.
I have a class call File_Class that have a public static attribute call File_Name.
Now in another class, I have a linkedlist and each one of the element is supposely a File_Class object. The problem that I am having now is that whenever I create a new File_Class (File_Class New_Class = new File_Class (File_Name)), i am actually getting a reference to the old one so that anything that I change reflects on every element of my link list.
My question now is
1. how exactly do i enforce that a new instance of the object (File_Class) is created so i can make sure every element in my linked list is distinct.
2. why is this happening at all
thanks for your help in advance.
Hung-Hsun Su

Here is a simple example that i wrote just to demonstrate the point. it seems that i always get the same object no matter what. Thanks again.
Result:
AFTER 0 1 2
1 2
AFTER 1 10 20
10 20
10 20
AFTER 2 99 999
99 999
99 999
99 999
Code:
class T
          public static int A;
          public static int B;
class Test
          static T TA[] = new T[5];
          private static void Set_Value (int i, int A, int B)
                    T t1 = new T ();
                    t1.A = A;
                    t1.B = B;
                    TA[i] = t1;
          private static void Print (int i)
                    for (int k = 0; k <= i; k++)
                              System.out.println (TA[k].A + " " + TA[k].B);
          public static void main (String args[])
                    System.out.println ("AFTER 0 1 2");
                    Set_Value (0, 1, 2);
                    Print (0);
                    System.out.println ("AFTER 1 10 20");
                    Set_Value (1, 10, 20);
                    Print (1);
                    System.out.println ("AFTER 2 99 999");
                    Set_Value (2, 99, 999);
                    Print (2);
     }

How to make sure Bridge Mode is OFF on my new TC

Similar Messages

Maybe you are looking for