How to make sure speakers are receiving power Toshiba Satellite L305D-S5938

Hello, I have been troubleshooting my sound issues with my laptop and have deduced three possibilities; Speakers not receiving power, IRQ problem, or a Sound card issue.
All sound is still being registered by the OS, I have uninstalled/reinstalled drivers, and made sure the correct output device is selected. Sound does not work on my other OS on a different partition.
My Device Manager shows everything running correctly, and all services are running.
Help would be appreciated.

Satellite L305D-S5938
Sound does not work on my other OS on a different partition.
I hope you're not offended if I suggest you check the volume-control dial on the front of the computer in the center.
It's the most frequent cause of this sort of thing.
-Jerry

Similar Messages

How to make sure frames are present

i am trying to open two web pages in a single window , but while browsing i am not able to keep my frames , when i press some links the frames r lost. What should i do to keep my frames in place and open pages without losing any frames
i have used all these scripts
<script language="javascript">
if(self.location==top.location)self.location="main.html?top.html";
</script>
but not working .
sorry if i palced in wrong fourm.

You can check with a HTML / Javascript forum for a solution.
Provide them more details about your HTML code, otherwise they won't understand where the problem is.

How do I use Adaptive Limiter to make sure bounces are same volume?

Hi,
I've been making ear training exercises for myself - you can understand what here:
http://discussions.apple.com/thread.jspa?threadID=490846&tstart=0
Here's what I need to do - and don't know how:
I want all bounced exercises to play at the same volume.
Each exercise has two MIDI regions. The first region (Region #1) plays at the begining of all exercises. When I look at the Output track when Region #1 plays, it is at 0.2 DB - no clipping. However, Region #2 clips in varying degrees depending on what octave an interval is being played at. For instance, a C and E played together around C1 doesn't clip - but transposed to C5 or C6 it clips anywhere from 3.7 to 4.6. I can't just lower the output volume before it clips - because it's important the Region #1 stays the same volume-wise on all of the exercises.
Some people have said just add an adaptive limiter to the Output 1-2 track... but how do I set it?
Any suggestions? Anyone understand this?? It's hard to explain on this end...
Thanks.

you don't use adaptive limiter to make sure bounces are the same volume.
that is not the function of the adaptive limiter.
the limiter puts a ceiling on the signal and optionally raises the gain. You'd use this on certain instruments that are known to produce loud peaks, such as Bass Guitar and Vocal,
It is used as the last plugin in the chain on the master fader when mixing something down, to prevent the mix from peaking.
IMO, the logic limiter doesn't destroy anything unless the mix itself has something wrong with it.
A lot of people reach for limiter when what their ears are really looking for is to multiband compress.
Your solution is to use a COMPRESSOR (not the multiband compressor, just the simple Logic compressor).
Do NOT use the default setting of the logic compressor in your case, because it defaults with its 'auto Gain' turned on which will raise your volume (a lot).
Put a compressor as the first plugin in all of your piano channels, or into a Bus, and set all your piano tracks to output to the bus with the compessor on it.
Settings:
THRESHOLD : -10
ATTACK : 0 (play with it, pianos feel good with a low one,
could try 15ms or less)
DECAY : play with it, I'd use 50ms with a Piano track
AUTO GAIN : off
GAIN : +4
RATIO : try 12.0
This setting will attenuate anything above -10 and will raise the gain up to a healthy level to compensate.
Anything below -10 won't be touched.
Since the compressor will 'squash' your signal slightly,
some frequencies will appear louder to the ear after the piano is compressed. So just AFTER the compressor on the same track, put a Logic Channel EQ and conservatively pull down some of the freq ranges to bring them back to normal.
And that's it.
a tip: When working in logic, no matter what the project, when it's time to mixdown put a COMPRESSOR on every single channel as the first plugin. Then play with plugins, etc.
I do have many issues with Logic's workflow, but the dynamics plugins IMO are very good.

How do I see photos in iCloud to make sure they are backed up?

How do I see photos in iCloud to make sure they are backed up?

If you see them in iCloud or photo stream they are backed up.

My widget browser keeps showing "failed getting widget feed" and keeps saying "failed getting widget feed and make sure you are connected to the internet" when I am connected to the internet. How do I fix this?

my widget browser keeps showing "failed getting widget feed" and keeps saying "failed getting widget feed and make sure you are connected to the internet" when I am connected to the internet. How do I fix this?

Widget Browser is gone. Adobe pulled the plug on it quite a while ago.
See this related discussion from earlier today.
Widgets a Gone Gone
Nancy O.

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

"ADE could not connect to the obtention server. Make sure you are connected to internet" error message.

I am trying to download a new ebook that I bought on ebook.de (already did it before and never had problem) and this error message appears "ADE could not connect to the obtention server. Make sure you are connected to internet". I am connected to internet and my connection is quite good... I have no idea how to fix this problem. Can someone help me?

Hello,
Quickly you can do a check.
Open your browser
Type URL: https://adeactivate.adobe.com/adept/Status
Press enter
You should see something like:
If it says "UP", this indicates ADE will be able to contact activation server.
If not, then, maybe firewall is causing you this issue.
Thanks

TS3048 i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

How to make sure that schema name is not included with generated sqls

How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanks

The full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

I just upgraded to the new 4, but not sure how to make sure all my apps (purchases) get over to the new phone from iphone 3. can't seem to find instructions. thanks.

I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.

Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109

"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"

I'm using Firefox 4 Beta and I tryed install update but I dont got success. Now every time that I go start the browser is displayed the mensage: "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again"
My release is installed not in default drive C:\. I installed in the other Partition on my PC.
I don't have other release installed.

Try a clean re-install.
* Download the setup file from http://www.mozilla.com/en-US/firefox/RC (this is for the Firefox 4 release candidate)
* Uninstall Firefox, do not select the option to "Remove my Firefox personal data"
* Delete the Firefox installation directory - http://kb.mozillazine.org/Installation_directory
* Re-install Firefox
This process does not remove the Firefox user data such as bookmarks and passwords which are stored elsewhere in the profile folder.
You may also need to manually reset the Software Update feature by deleting the software update files as shown in the "Software Update not working properly" section here - http://kb.mozillazine.org/Software_Update

"Help" menu always says "The current topic is currently unavailable. Make sure you are connected to the internet. I am connected to the internet.

"Help" menu always says: "The current topic is currently unavailable." " Make sure you are
connected to the internet." I am connected to the internet.

Please restart your machine and try again.
Thanks

How to draw a perfect circle and how to make sure it is perfectly centered inside a square

How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.

1. Create a square canvas.
2. With the Elipse tool, hold down Shift (Shift forces a circle). Draw the circle anywhere on the canvas (Shape 1 in this example).
3. Simplify the circle layer
4. Ctrl-click the layer to select the circle.
5. Copy the selection to the clipboard (Edit > Copy).
6. Deselect the selection.
7. Paste from the clipboard (Edit > Paste). The pasted circle (Layer 1) will be centered.
8. Delete the original circle layer.
NOTE: Step 6 is the key. This guarantees that the pasted circle will be centered.
If you want a circle completely within a square you can simply draw and simplify a circle on any shape canvas. Ctlrl-click the circle to to select it and copy to the clipboard.
Then do File > New from Clipboard. This creates the circle cropped to a square on transparent background.

How to make sure speakers are receiving power Toshiba Satellite L305D-S5938

Similar Messages

Maybe you are looking for