How to make tab borders visible?

Just updated to ff 29 and the tab borders are almost invisible.
In the previous versions of firefox you could see where one tab ended and next started, in current there is this very light half length grey line that is almost invisible on right and nothing on top.
How do I make it so that the tab borders are visible? (Something like a full black line on left/right of tabs and some clear border between the tabs and the menu bar on top)

I use Firefox as my primary browser at work. I start every day with ELEVEN tabs (two pinned), all renamed and locked for specific tasks I do throughout the day. I am on the phone all day. I add and close ADDITIONAL tabs all day for different tasks.
Additionally, I am over 50 and am having some problems with my eyesight. I've just recently gotten progressive lenses but even that doesn't help me with the new Firefox design.
It's very hard to tell where one tab begins and one ends. I could not wait to switch themes in order to find one that works for me at work. However most of the themes are just as bad - I can barely tell where one tab ends and the other begins. It's hard to click through the 11 tabs I need for work, let alone the additional tabs I open for different tasks.
Additionally the font is so light that on many themes (and I have looked at least 200), I cannot read either the tab names or my shortcuts on the Bookmarks Toolbar.
'''HELP'''

Similar Messages

How to make table borders visible in BI Publisher report

Hi,
I'm trying to create a BI Publisher report that contains a number of table and want to make sure the borders of the table visible after publishing. Can you anyone tell me how?
Edited by: user11001592 on Jan 22, 2010 2:50 AM

In Word, if you have set the borders on then you should see them in the output. In Word it has a setting to let you see 'gridlines' even if they are not set ie you have turned the borders off. Highlight the table and set all the borders on and re-try. If that fails, try building the table from scratch and copy the cell contents across to the new table
Tim

How to make the library visible IN AN EXTERNAL disk?

Hello.
Searched this forum (found about 25 identical questions and answers "how to make the library visible").
I turned mine and it is constantly visible now.
Before installing Lion made a bootable image.
When I connect the external HD, I see it in the Finder side bar, click on users>myname and the library folder doesn't show up.
Tried the 3 ways to make it visible but they all bring back and show the Lion's library on my MBP, not the one in the external HD.
Any ideas?
(BTW, I am just an "amateur user", not too heavy, so just, please take in consideration that if you explain to me slowly I will understand quicly)...
Thanks in advance.
Saul

Thank you Baltwo.
Don't I know you from CCC? (If judging from your answer I do, always hit the nail in the head)...
Yes, I guess I used the wrong terminology. Anyway, I did a bootable disk/image/clone, however it's called, with CCC (Carbon Copy Cloner), which BTW I am using for at least 3 years and saved several times my behind.
So, if I understood you right, you mean booting from my external HD and make the library visible (I don't remember if the clone was made after installing Lion or still while in Snow L, but will check).
I'll try and update here if it worked.
Thanks again and have a good evening.
Saul

Can you explain me clearly how to make company code visible in cost center

can you explain me clearly how to make company code visible in cost center master data using tcode kmlv

Hi,
There is no way to activate the company code field. If your Controlling Area and Company Code have one to one Assignment, then Company code is defaulted from the Controlling Area. However, if multiple Company Codes are assigned to one Controlling Area, then Company Code becomes a mandatory field in the Cost Center master data
Also, in case you have multiple company codes assigned to one controlling area, please check the setting of the Controlling Area in Configuration and see if have selected "Cross Company Code Cost Accounting" . Also, check if you have assigned all the company codes to the controlling area
Regards
Mahendra

How to make a tabstrip visible and invisible again?

Hi
I have a GUI with Fields, Texts, Checkboxes, Radio buttons, a Button and of
course a tabstrip with 7 tabs.
Before I want to show some data in the tabs of the tabstrip, I have to fill the fields, check a radio button and checkboxes. After filled all entries needed, I will start
the preparation of the data with clicking on the button.
Before the click on the button the tabstrip has to be invisible. After the preparation
of the data I will make the tabstrip with its tabs visible.
All this is in the same dynpro (e.g. 0100). I don't build it together with to dynpros.
I tried with LOOP AT SCREEN ... ENDLOOP, but the tabstrip does not appear.
The only attribute accessable is "activetab".
How to make that happen?
Thanks for your help
Frowin

Hi
Suppose you have 3 screen:
- 1 main screen (100)
- 2 subscreen    (101, 102)
In the subscreen 101 you need to design your tabstrip (so you need to move your tabstrip from main screen), the subscreen 102 has to be empty.
In the PBO of screen 100:
PROCESS PBO.
MODULE SET_SUBSCREEN.
CALL SUBSCREEN SUBAREA INCLUDING V_REPID V_SCREEN.
In the module SET_SUBSCREEN, you insert the code you need to choose the right subscreen:
IF _SHOW = 'X'.
V_SCREEN = '0101'.
ELSE.
V_SCREEN = '0102'.
ENDIF.
The flag _SHOW is setted in PAI after pressing the button:
MODULE USER_COMMAND.
    CASE OK_CODE.
       WHEN 'SHOW'. _SHOW = 'X'.
Max
Edited by: max bianchi on Jan 9, 2008 5:03 PM

WPF: How to make Tab Header to show three different icons?

Our WPF application needs Tab header to show three different icons and Foreground.
If tab is not selected, show one icon and black foreground. If tab is selected, show another icon and white foreground. If tab is selected and also require show Chromestyle, show third icon and red foreground.
we have tried the following code. However, MultiDataTrigger section does not work.
<TabItem x:Name="tabItemSetup" Header="Setup">
<TabItem.HeaderTemplate>
<DataTemplate>
<StackPanel Orientation="Vertical">
<Image x:Name="imgSetup" Height="50" Width="65" Source="Resources/Images/UNSELECTED_Setup Icon.png" DockPanel.Dock="Top" />
<TextBlock x:Name="txtSetup" Text="{Binding}" Foreground="Black" Style="{StaticResource TabTextStyle}" DockPanel.Dock="Bottom" FontFamily="Eras ITC" FontSize="13.333"/>
</StackPanel>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsSelected, RelativeSource={RelativeSource AncestorType={x:Type TabItem}}}" Value="True">
<Setter TargetName="txtSetup" Property="Foreground" Value="White"/>
<Setter TargetName="imgSetup" Property="Source" Value="Resources/Images/SELECTED_Setup Icon.png"/>
</DataTrigger>
<MultiDataTrigger>
<MultiDataTrigger.Conditions>
<Condition Binding="{Binding IsChromeStyle}" Value="True"/>
<Condition Binding="{Binding IsSelected, RelativeSource={RelativeSource AncestorType={x:Type TabItem}}}" Value="True"/>
</MultiDataTrigger.Conditions>
<MultiDataTrigger.Setters>
<Setter TargetName="txtSetup" Property="Foreground" Value="Red"/>
<Setter TargetName="imgSetup" Property="Source" Value="Resources/Images/Chrome SELECTED_Setup Icon.png"/>
</MultiDataTrigger.Setters>
</MultiDataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
</TabItem.HeaderTemplate>
</TabItem>
Does anyone know how to make it work? Thx!
JaneC

Where is the IsChromeStyle property defined? It is the Header, i.e. the string "Setup" that is the DataContext of the HeaderTemplate and the a string has no property called IsChromeStyle so you must specify a source for the binding.
If for example the DataContext object of the TabControl, or the parent of the TabControl (for example the window or whatever) has a property called IsChromeStyle you could bind to this one using a RelativeSource:
<MultiDataTrigger.Conditions>
<Condition Binding="{Binding DataContext.IsChromeStyle, RelativeSource={RelativeSource AncestorType={x:Type TabControl}}}" Value="True"/>
<Condition Binding="{Binding IsSelected, RelativeSource={RelativeSource AncestorType={x:Type TabItem}}}" Value="True"/>
</MultiDataTrigger.Conditions>
Then it should work. It is the binding that fails.
Please remember to close your threads by marking helpful posts as answer.

How to make Tab jump the proper way?

Hi,
I have different components on a panel - JComboBoxes, JTextFields, JCheckBoxes, etc.
I'd like to make Tab first jump only on JTextFields and on other components after all JTextFields have been visited.
Could anyone please direct me where I should look for API or tutorial on how to implement Tab jump direction??

http://java.sun.com/j2se/1.4.1/docs/api/java/awt/event/FocusAdapter.html

How to make tabs take custom heights

Hey Guys
i have Jdev 11.1.1.6.0
i want to make tabs in normal and hover and selected state to take my custom height.
i give it in css my custom height but i really suffered it doesn't work it takes default height and its small
waiting for your support from experts.
Thanks guys :)

try dimensionsFrom="children" in either your panelStretchLayout or in Tab

How to make all columns visible in an interactive report by default

Hello All,
I have an interactive report with the first column is visible and the rest are hidden by default. Is there any way that i can make them all visible by default so the users do not have to go into actions to display them in report?
Thank you
Sezer

Login as developer > run the interactive report > actions > select all columns you want
Now got to actions > save > default > primary > apply
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ir_using.htm#CHDFDFJA

How to make Transperant container visible , invisble by code

Dear experts ,
I want make transaperant container visible or invisible based some boolean value .
I have gone thr' class CL_WD_UIELEMENT and CL_WD_TRANSPARENT_CONTAINER. I have found method SET_VISIBLE .
Let suppose name of my transperant container TC_COSTCENTER .Please let me know what code I have to write . Where should I write ?
I am writing it code in WD_INIT as this process is based on value that I get on boolean value which tell decide visibility of Transperant container.
Waiting for reply . Urgetly .
Points will be given surely .
Cheers
Parry

Hi Parry,
The dynamic programming way is follows:
you need to first get a reference to the root element 'ROOTUIELEMENTCONTAINER' from the view reference available within the wddomodifyview method. the variable returned is of type cl_w_uielement_container. you can use the method get_root_element( ) of the interface if_wd_view for this purpose.
next get a reference to the transparent container by using the method get_child of the class cl_wd_uielement_container( using the variable returned from the prevoius call) and cast it to a variable of the class cl_wd_transparent_container. to this method you need to pass the id of your transparent container.
Once you have the reference you can use the method set_visible( ) to make the container visible or invisible at runtime.
However you need to be careful about the placement of this code within the wddomodifyview method because it would get executed every time. Thus the best way is to store the reference to view in a component controller the first time and later on use this attribute anywhere within your component.
Regards,
Shweta

HOW To make tabbing visible on html 5 output in internet explorer 10 and up

Hello , I am publishing a html 5 output , I need it to allow tabbing on interactive objects. but focus is not set on any object I am not able to see my cursor as I tab in internet explorer. please guide. I have updated the SCORM_utilities.js but no success.

Hello , I am publishing a html 5 output , I need it to allow tabbing on interactive objects. but focus is not set on any object I am not able to see my cursor as I tab in internet explorer. please guide. I have updated the SCORM_utilities.js but no success.

How to make tab strip invisible?

hi Gurus,
i had used a tabstrip in my screen 100. now i want make my strip invisible initailly.
if certail condition is satisfied than i want to show my tabstrip.
can anybody help me this,
thanks in advance.

Hi vipul,
Tabstrip Controls
Tabstrip controls are made up of pushbuttons (the tabs) and several subscreens. Each tab has its own subscreen. These tabs are part of the main screen and are therefore displayed in the field list of the dialog box for the main screen. Subscreen fields are displayed in other dialog boxes.
According to how a tabstrip has been constructed internally:
● Either a sole dialog box is displayed for the subscreen that belongs to the tab that is currently active, or
● Dialog boxes are displayed for all subscreens that belong to the tabstrip control.
If an invisible tab is set to active by the application transaction, different subscreens are selected for those tabs remaining that actually belong to other tabs. If the subscreens are invisible, it is also possible that an empty screen will be displayed.
Technical Background:
The transaction variant sets another tab (the remaining tab furthest left) to active. This additional active tab is, however, unknown in the application transaction, which assumes that its tab is active and selects the corresponding subscreen. If this subscreen has been faded out using the transaction variant, then an empty screen is displayed.
CXTAB_CONTROL in SAP ABAP and TABLE CONTROL ... This field is used to make a particular column invisible or visible
thanks
karthik

How to make tabs with same width in tabbedPane?

I have a JTabbedPane with seven tabs, but can I make them same width? and fill out whole top side.
Thank you.

not directly without knowing how much space there is an adding spaces to the labels accordingly to space them out. You'd have to modify the tabbedpane UI classes for the L&F.

How to make my Library visible in open dialog?

I know how to get to my Library in the Finder, but how can I make it visible in an Open dialog? I want Disk Inventory X to scan it.

Which Mac do you have?
Which operating system is it running?
You posted in Mac OS X Lion 10.7 forum but you profile claims you have an eMac with a PowerPC and it is running 10.3.4.
Please straighten this out because they are two totally different computer and operating systems.

How to make tabs show up selectively in different pages?

Hi,
I'm new to APEX and getting my hands dirty now...
I have a standard Tab Set called "TS1", which has 2 tabs (say, tab1 and tab2) in there. Since tabs are under "shared component", so it appears that they are shared throughout all the 10 pages I have.
How can I make the tabs show up selectively in different pages? For example, I want tab1 and tab2 showing up in page1-9, but NOT in page10. There's a "conditions" (Condition Type), but it has many types and I don't know how to use it.
Please kindly help!
Thanks much,
Helen

I have a similar requirement. I have several tabs (Operations, Maintenance, Safety, etc.) and users get individually assigned rights. I have a table where I have all the users listed and I added one column for each tab so I can set whether or not that user has access to that tab. You could go the same thing with groups if you want.
Basically, my table looks like this:
USER_ID, USER_NM, PWD_HASH, SAFETY_TAB, MAINT_TAB, OPER_TAB, etc.
where each of the _TAB fields is set up as a VARCHAR2(2) for just Y/N.
On my home page, I assign an APPLICATION_ITEM called G_USER_ID (Global User ID) on login so I can track who it is. Then I set the condition statement on the tab to SQL QUERY RETURNS AT LEAST ONE ROW
using the following query:
select SAFETY_TAB from APEX_USERS
where SAFETY_TAB = 'Y'
and USER_ID = :G_USER_IDThis example would be for the Safety tab, but you can easily substitute others. It works pretty slick.

How to make tab borders visible?

Similar Messages

Maybe you are looking for