How to make text clicks go with the volume?

My old iPod 3G used to make text typing sounds according to my volume. So if my volume was off there would be no text noises but with my new iPod touch the texting sounds are there regardless. What do I do?

Roxpat wrote:
I'm beginning to consider learning other applications (Dreamweaver and/or specific languages), so feel free to offer those up as well.
roxpat ~ Since your web site content is community oriented, you may be interested in this free, web-based site builder for social networks:
http://about.ning.com/product.php
...Their Events feature lets members know about upcoming playgroups, coffee mornings, etc. related to your social network's theme. Read more here.
You may want to consider hyperlinking from your iWeb site to a Ning site to provide some specific feature that iWeb doesn't offer.

Similar Messages

Suggestion for how to make text more legible with line in background?

I want to create a dashed line that connects a bunch of text located inside a text box. However, the dashed line seems to conflict a bit with the text visually, making it difficult to read. I sent the line to the back and put small white rectangles behind the text to block the line, though I am going to have lots of these, and it is a pain. Anyone have any other suggestions?
Thanks

The white stroke is more a movie sub title thing and like in the movies does not always work.
Try this and see if you like it
select the text with a selection tool
add a new fill of white and drag the fill below the characters in th appearance panel
the highlight the new fill in the appearance panel
then go to Effect>Convert to Shape>Rectangle
give it 2pts extra relative space
below with the new fill converted not visible
withe the new fill converted to a rectangle visible
The problem with this method and the extra stroke method is that they are not transparent and if you place an object below them you will see the stroke or
fill
You can vary the gaps and fills until you get the right combination but that might be very difficult unless you simply vary the placement of the text.

How to compare text box value with the table data??

Hello ALL,
I created one stored procedure in DB,it is as follows:-
CREATE or replace PROCEDURE chkUser
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
And at the front end I have designed a form with 2 text boxes, now my question is I wanna compare these text box values(which user enters) with the data of the table....??? something like control (may be I am not sure)..... ???
If anybody can help me out with this issue...... help will be appreciated
Thank you.
regards,
Kumar

hi Elise,
I'm always getting the Error Message as "Invalid Creditianls"... let me tell you the whole scenario with sql synatx.
I have created tables as:-
CREATE TABLE "TBUSER"
(     "LOGINID" VARCHAR2(30) NOT NULL ENABLE,
     "PASSWORD" VARCHAR2(30),
     CONSTRAINT "TBUSER_PK" PRIMARY KEY ("LOGINID") ENABLE
than I created the Procedure on tbuser, it is as:-
create or replace PROCEDURE logincheck
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
now at the front end side I have created one form with 2 text boxes (P8_USERNAME & P8_PASSWORD) and 2 buttons (Cancel and Submit)
as per you told me in the above post, I have created 'Validation' procedure with Type as 'Exists' and expression(into Validation Expression1)as:-
select 1 from tbuser
where loginid = :P8_USERNAME
and password = :P8_PASSWORD;
and
kept an error message as 'Invalid credentials'.....
but I don't know what's going wrong..... I do have few data into the table, and when I am entering the same data(with case sensitive) I am getting the Error message, rather than when the credentials are perfect user should be allowed to enter into the current page(where I have created this form and validation procedure)....
any idea what's going worng and where...????
thxs.... appreciated..
regards,
Kumar

How to compare text field length with the length of input characers

I hae a problem with the length of text field
I want to fix the length of TextField by taking the length of attribute to, whihc i have to use in text field
Like i have set the max length of Attribut to 10 and set the length of textfield also 10.
But the problem is that if i enter 10 'i' it dosn't fill even half the space in TextField
And opposit if i enter 10 'W'
I wonder if there is a solution for this problem
i ma using True Type of Font

* paint method in your own class that extends Canvas
* @param g where to paint e.g. printer, screen, ram
public void paint (Graphics g)
// display word "today" centred at x,y
FontMetrics fm = getFontMetrics( g.getFont( ) );
String wording = "today" ;
int xadj = fm.stringWidth( wording )/ 2;
// position bottom left corner of the text
g.drawString(wording , x-xadj, y );
// draw a red line from x1,y1 to x2,y2
g.setColor( Color .red );
g.drawLine( x1 , y1, x2, y2);
// draw an pre-existing Image. imX,imY is top left corner of the Image.
g.drawImage ( image , imX, imY , imWidth, imHeight , this);
} //end paint

How to Make a 1 DVD with the content of 2 DVD's?

I have a project that rquires to re-edit the content of 1 DVD to spanish, and also add the original English DVD material into this new DVD, how do I create 1 DVD from my normal Encore project and and the other files from the English Version Disc, which by the way has links, PDF's, and Ineractual Player Auto Start stuff. I'm using Encore CS3, but I just downloaded CS4 on a PC XP. Thanks for your help.

Thanks for the reply. I'll respond to your questions...
I have a DVD (movie not ROM) with a 30 minute safety video in English. The DVD has an incredible amount of links that go from one menu to another to another, it's the most confusing and elaborate menu/chapter I've ever seen, well my customer wants me to translate it into Spanish, but now he told me he wants the English AND Spanish version to be in one disc. That's the problem. I can capture the movie. I can translate the script and do the Spanish voice over (just like in the old karate movies) I can create the new menu pages in Spanish and I can create the intricate links, so what do I do with the English version? I can't create the whole English version again, more like I don't want to is there another easier option?
Once I create the new Spanish project using Encore CS4 I don't know how to prompt Encore to attach the English DVD content with all the functionality of menus, chapters and links. I can attach movies, assets, etc. Can I attach anything else? This is what the DVD has inside:
16 objects: 1.45 GB
Video_TS folder
Audio_TS Folder
Average_files folder
Common folder
Good_files folder
Poor_files folder
Win folder
Autorun File
Average HTML document file
Disc.id ID file
Good HTML document file
IG87 Word Document file
Install InterActual file
Poor HTML document file
Poster PDF file
Readme TXT file
> Interactual Player is a file that the past DVD creator used to help the viewer go from Laptop video to web pages, etc. really annoying since you have to download to your hard drive as soon as the DVD starts.
Thanks for your time.
VDOMSTR

How to make a control table with the same number of rows of its itab

I'm creating a control table, but it always have the maximum number of lines possible.
How can I make it so that it has only the same number of rows of it's internal table?

solved partialy with this:
MODULE locka_lin OUTPUT.
DATA: lin TYPE i.
DESCRIBE TABLE t_obj LINES lin.
table_con-lines = lin.
ENDMODULE. " OUTPUT
but it still doent work when lin = 0
any simple way to solve it on that case?
Edited by: RagnaRock on May 5, 2010 6:00 PM

Help on how to make an infinite loop with the same space on all images

HI:
I made a movie clip with infinite loop in which there are images that move from right to left something simple like a marquee, and each image has a blank space between them, but between last and first image there is a more space, how I can do to make all images have an equal space between each one and that the motion never stops.

Thanks for your time and answers my friend, but I'm still not be able to achieve what I want, I forgot to tell that I'm doing this by layers, let's say, I have 5 images, (in fact I have like 50 images converted to movie clip symbols) each image has it's own layer, layer 1, layer 2, layer 3, layer 4, layer 5, then I put a 200 frame motion tween on all layers at 30 fps, then I arranged layer 1 on the first frame to the frame 200, the second layer from frame 50 to frame 250, third layer from frame 100 to frame 300, fourth layer from frame 150 to frame 350, and fifth layer from frame 200 to frame 400, by this I mean I put a 50 frame of space on each image but if you can see, the last image has a duration from frame 200 to frame 400, and there's nothing on frame 250 where it is supposed to be another image to match the same blank space of all the others, the movie clip restarts on the frame 400, and there's a 150 frames of blank space between the last image and the first image, I put the gotoandplay on the frame 250, but it abruptly restarts the movie.
Is there another way to do this ?
Am I doing something wrong ?
Please I really really need help on this.
Thanks

How to make a round circle with the notch line

Hi
If I in Illustrator on the same layer make a Elipse with a 50pt stroke (blue color) and then i make 2 lines with a 20pt stroke (black color), so its lookslike a cross and rotate it 45 degr.
Then i Outline the 3 elements "Outline Stroke" and align the 3 elements H and V Align Center.
Now i want to cut the black lines out of the blue cirkel, so I get 4 pices with a "non-color" space between, but wjen i select the 3 elements and use Pathfinder -> Shape Modes, then i can't cut the lines out...
What do i do wrong.
What i want to end up with is something like this cirkel, so i can tage the 3 pices and give em another color.

I did it this way.
1) Ungroup a copy of a pie chart to disconnect the data.
2) Draw a filled circle on top of the chart.
3) Pathfinder Divide and delete the pieces in the centre.
4) Select the remaining pieces and Object > Expand.
5) Select just the expanded strokes and pathfinder Unite
6) Pathfinder Divide and delete the United stroke.

How do you text an email with the palm pre?

can someone tell me how i would go about texting someone an email that i received. . . i don't want to email it I want to text the email. . . I tried to save it as a memo and then send it as a text but it wouldn't do it and I tried to copy the email and paste it to text but it wouldn't let me do that either. . . any suggestions?

Shift-tap the email, and it should highlight so you can gesture tap-C to copy it and gesture-V to paste to text.
How long is this email? It could be very cumbersome for the receiver.

How to make a photo "fit" with the surrounding film clips?

I am working on a new project in which I have a photo which is "taller" than the other film clips, so consequently, when that clip is playing, one cannot see the top or the bottom because they have been cropped off to match the height of the other film clips.
What can I do to make that picture "fit"? It is important because this is a photo of a person, not just landscape.
-L
Message was edited by: Lorna from Hawaii

I clicked a button that said Ken Burns!!! I figured it out.
-L

How Do You Make an Image Flow with the Text?

Hello all,
I am using CS4 InDesign on Windows Vista. I am fairly new to Indesign but try to do my research and homework well before asking what I hope is not a really dumb question.
I am writing a book of approx. 350 pages that is an illustrated encyclopedia of 156 plants and their oils.
Each 2 page spread is a single entry for a plant. The graphics frames on each spread are identical in size, position and styles for a consistent look throughout the document.As you can see (hopefully) each page is a single column. See screenshot below
In order to overcome my first problem of positioning and sizing the graphics frames uniformly, I created the master pages with the graphics placeholders sized, positioned and formatted to my liking. This worked wonderfully and I placed all of my 300+ graphics by simply over riding each frame.
Then in my editing I decided to add another 2 page spread somewhere in the middle of this fairly large document.
What a NIGHTMARE. The text predictably shifted but now ALL of my graphics were no longer associated with the corresponding text! Arrrgghhh.I had not anticipated this behavior (used MS Word for 15 years) or I would have done something different.
3 hours later I finished re -"placing" the images associated with the correct text.
I researched the help file and found out about the neccessity of anchoring graphics to text. I have read through the threads in this forum, followed links to "indesignsecrets.com/make-an-image-flow-with-the-text" and " Working with anchored objects by Anne Marie Concepcion"
My concerns are this.
An inline graphic places the graphic back onto your text layer for some reason ( Previously my graphics each had their own layer)
Not wanting to start (again) from scratch with my graphics I converted them to inline/custom anchored objects.
But to select then cut then paste every pre existing graphic to anchor it inline seems to be cumbersome and counter intuitive although the top smaller graphic did position well and the text seemed to wrap ok.
When I placed the larger bottom graphic on the left facing page using custom positioning I was not able to get the text to wrap at all.( The in line anchoring did not seem to allow for positioning on anything but the 'Y' axis).
It seems that there would be a simpler way to place text and graphics where you want them and have them associate and flow together (or not) when you want them to and have text wrap easily around an anchored object without keyboard gymnastics. It would seem that the concept of a certain graphic being associated or linked with certain text would not be an unusual concept in desktop publishing.
Am I missing something?
Can you place an anchored graphics frame on the master page with your desired options?
How would this be done if possible?
Is there any other way (i.e grouping) to keep graphics associated with the desired text so that it flows together if extra pages are added?
Is the fact that my graphics frames are on my master pages responsible for my text wrap difficulty? (I have text wrap enabled on my master pages)
Are there any settings, redundant or otherwise, I need to be aware of?
Thank you in advance for any suggestions or directions
L.N.

Hello Again,
Thank You Bob but I am still a little fuzzy on this. I have already created object styles for the graphics frames. For instance the small graphic underneath the heading (Its a drop of oil) has an object style applied. Now I checked and it has the anchored object options checked in the style dialog box. When I reapply the style to the next similar graphics nothing happens. It is still not anchored. Do I need to create a new style based on "nothing" add my effects plus the anchoring options? Basically start over. If thats what I need to do thats OK. As to your instruction that object styles could accomodate this anchoring thing...thats what I thought too but somehow I can't get it to work. See object style dialog box screenshot below:
For the larger graphic on the bottom of the left facing page. I still cannot get any text to wrap. In the screenshot example the text describing this particular plant doesn't go to the bottom of the page so the wrapping issue on this page is moot. However I have some entries where the body of the description is more involved and does go to the bottom of the page and the text WOULD need to wrap around the plant (larger ) graphic.
Hi there Harb, Yes I found out early on that object styles can't apply size (that would be on my wish list for sure) That is why I found that creating my graphics frames on the master page with the correct size, effects and positioning tickled me so much. Can you believe I originally went through and MANUALLY resized and repositioned each and every 300+ graphics in this book but it still wasn't right. I'm nothing if not persistent. (Now if I could just get my grown sons to pick up their socks!)
Anyway the master page graphics frames idea would be perfect if I could get the images to anchor in their respective spots on the master page as well.
For your second suggestion. I am not clear about why I would need to break the threads of each spread so that each spread is a seperate article. Is the threading issue the thing that is causing my text to move on leaving their associated graphics behind? If so how do I go about doing this?
So to recap:
1. I need to know if I can modify my object style or recreate from scratch with the anchoring option (as I said it didn't work)
2. Can't get text to wrap around the Custom anchored graphic at bottom of page at all
3. Im not clear on the breaking the threading on the spreads
I am willing to go back through and start from scratch (new master pages, styles etc ) if neccesary. This book is the culmination of 7 years of research and artwork.Basically the project is DONE. Now if I can just format it correctly.
I can't thank you both enough for your time, suggestions, expertise and patience.
Thanks again
LN

How to create array of indicators, with the indicators numeric text value changes as it falls above or below the limit

Hi,
I am a newbie here. Just started using Labview for my project. Currently having some difficulties over here. Hopefully someone could enlighten me. I wanted to create an array of 60 indicators, where the indicators value are measured from the PCI card. But now the problem is how to make my indicator values in the array change its numeric text color if it falls below or above the limit set. I've attached the vi together with this. Thanks.
Regards,
CH.Ong
Attachments:
testing.vi ‏15 KB
try.vi ‏120 KB

Maybe, you can try something like this...
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
To change Boolean Text Color in Array of Clusters.vi ‏18 KB

How to make text columns with adobe muse

Hi,How to make text columns with adobe muse (like InDesign)?

Multiple columns can be acheived with CSS - http://www.w3schools.com/css/css3_multiple_columns.asp
div
-moz-column-count:3; /* Firefox */
-webkit-column-count:3; /* Safari and Chrome */
column-count:3;
I'm surprised that Muse does not support text columns yet, but perhaps the custom CSS can be added in style tags on page properties. Haven't tried it, but don't see why it wouldn't work.

How can I make text slide in from the right?

I'm really enjoying learning more with Captivate 6 and the community has been very helpful so far. I can't figure out how to get very simple text effects/transitions such as bringing text from the side of the frame to "slide" into place. This has been a text effect of every program for a decade, is this basic transition available in 6? I'm making a list on a few screens and would very much like the text to simply slide in from the right.
I'm about to just make a transparent png with the text to accomplish this for now considering it's my best bet. Any information would be handy. Thanks!

Apparently if your resolution is too low or the workspace isn't allowing "space" for a full effects window to show up, the whole thing shows up blank and grey. How obnoxious! By closing my properties tab on the right (after many other fixes including making those pngs) it showed up.
See: http://forums.adobe.com/message/4620862

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to make text clicks go with the volume?

Similar Messages

Maybe you are looking for