How to make the Applicant name link disabled in the webform of oracle apps

Hi,
In iRecruitment module,i have created a new responsibility with the name "irecruitment - interview" the menu attached with the responsibility is "Irc Employee Menu" and the functions and menu excluded are "Irc Employee Applicant Home Page","Irc Employee Home Page","IRC Employee Candidate Application Menu","Irc Employee Referral Application","Irc Interviewer Application".
When i click on the responsibility the applicant names come,and on the applicant name link is there,on clicking onto the applicant name the other information of the vacancy also becomes visible,i want that the applicant name should be visible but the link link which is coming onto it should get disabled.
In order to achieve this i have gone to personalisation and under the "Applicant Name" i set the "Popup Enabled" to "false" at the responsibility level.But it is not working out.
Please tell me how can i achieve this.
Regards
Ankit

Hi Avaneesh,
When i goes to the personalisation in the "Destination URI" at all the levels i can only see "inherit" written how to remove the "URL" as specified by you.
Please reply
Best Regards
Ankit

Similar Messages

  • How to Transfer the Data from ORACLE APPS to SAP

    Hi Gurus,
    Here are my couple of quieries regarding Data Migration from Legacy(Oracle Apps) to SAP.
    1. How to link between Legacy system(ORACLE APPS) and SAP ?
    2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
    Please respond to my queries ASAP.
    Thanks,
    SAPSURE.
    Edited by: sapsure on Sep 9, 2010 11:39 AM
    Edited by: sapsure on Sep 10, 2010 2:32 PM

    1. How to link between Legacy system(ORACLE APPS) and SAP ?
            If you have SAP PI in place then you can interact with oracle database tables directly from PI and then data can be posted to SAP transactions through IDocs/BAPIs.
            If you did not have SAP PI still you can do JDBC connection directly from ABAP program. Not sure about the exact steps check in forum.
    2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
            If you want to directly post the data SAP transactions (I hope not directly to SAP tables) then connection needs to establish through ABAP program or Via. PI.
    Regards,

  • Z10 - How to make the built in Photo app see photos on the SD Ram

    Hi,
    Was using my Z10 for recording video when it reported memory problems.. No problem. I baught it a 64 GIG SD ram to address any memory problems.. Perfect, all photos and videos now go to the SD ram.. BUT.....
    Neither the photos nor the videos appear in the lists of content in either the built in Photo application nor the Videos application. To see them I have to go to File Manager and view files stored on the SD ram were they have been recorded as expected and can be seen. Often when you go to see a video or picture in the File Manager to view a photo or video, no thumbnail of the photo is present! instead you get a generic icon that the file is a photo and you have to open it to see what photo or video it is. It isn't until some time after the thumbnails are properly updated. It also puts both photos and videos in the Camera folder on the SD ram instead of the associated folders on the SD.
    I was at the telus store while 2 telus reps struggling to find any way to get the photo app or the video app to display the SD ram content. They commented that Blackberry indicates it supports up to 32gig in SD ram but the fact that it is recording and retrieving properly indicates 64 gigs works too at least for this purpose.
    The Question: How does one tell the Photo and Video app to display camera data on the SD ram?
    Thanks,
    The Manx

    I've had issues with the 64gb cards also, one worked and another did exactly as you described.
    Some users have had to format the 64gb card to FAT32 to make it work.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to recompile the objects in oracle apps

    i used adadmin and compiled the apps schema .. but still i am getting INVALID objects .. how to compile these objects ?
    Below is the output after running adadmin .. suggest
    select owner,object_type,status from dba_objects where status='INVALID'
    SQL> /
    OWNER OBJECT_TYPE STATUS
    FLOWS_010500 JAVA SOURCE INVALID
    FLOWS_010500 JAVA CLASS INVALID
    PUBLIC SYNONYM INVALID
    PUBLIC SYNONYM INVALID
    PUBLIC SYNONYM INVALID
    PUBLIC SYNONYM INVALID
    RE PACKAGE BODY INVALID
    HERMAN TABLE INVALID
    APPS PACKAGE BODY INVALID
    APPS PACKAGE BODY INVALID
    APPS PACKAGE BODY INVALID
    OWNER OBJECT_TYPE STATUS
    APPS PACKAGE BODY INVALID
    APPS MATERIALIZED VIEW INVALID
    CA TABLE INVALID
    CA TABLE INVALID
    Thanks in advance

    i have 12.1.1 instance on Linux OS
    there is no adcompsc.pls file in $AD_TOP/sql .. i can see only adcompsc.sql You are on R12, and this script is no longer available -- See (Invalid Objects In Oracle Applications FAQs [ID 104457.1]), 10. How can I recompile all my invalid objects using ADCOMPSC.pls?
    Below is the error when i try to run the adcompsc.pls file .. please help
    [oaebiz@oracle sql]$ sqlplus @adcompsc.pls apps apps %
    SQL*Plus: Release 10.1.0.5.0 - Production on Tue Jan 4 08:36:03 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SP2-0310: unable to open file "adcompsc.pls"
    Enter User-name :Use adcompsc.sql instead.
    Thanks,
    Hussein

  • Workflow, How to make the attached SAP shortcut linked to a webgui t-code ?

    How to make the attached SAP shortcut linked to the webgui ? (Instead of the SAP Gui )
    When I received a "workflow msg" in my outlook inbox, I clicked on the attached shortcut.
    And a logon pop-up comes to me, in order that I logon to SAP in the SAPGui mode.
    It enables me to make a decision in SAP.
    I'd like that when the user receive the shortcut ( or a link ), it opens the webgui mode ?
    How can I do that ?
    Thx a lot,
    Erwan

    thx

  • How to make the wifi connection with Ipad in china since it requires user's name and password.

    How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

    The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

  • How to make the link between the technical version and the packaging vers.

    Hello,
    Does anyone know how to make the link between the technical version number and the packaging version number ?
    For exemple, I can download on the SAP Market Place the version B1iSN 8.8 PL7 but if I look into the B1iSN the version information, it returns B1iP_3.0_SP04_HF03.
    This is quite confusing.
    Thank you.

    Hi Gordon,
    In fact this information is usefull for me. I was looking for a customer installation but he did not remember which version was installed. They are facing some problems. So I don't know if I have to update B1iSN or not to solve it.
    B1iSN returns only the technical version number, but I would like to know which version was downloaded from the Market Place.

  • How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

    Hi Experts,
    I need help.
    I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only)  even in Display mode. How to make the field is non editable in display mode and editable in change mode.
    I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
    How to make this field to behave as standard fields?
    Please reply me <removed by moderator>
    Thank you in advance.
    Best Regards,
    Divakar.
    Edited by: Thomas Zloch on Mar 2, 2012

    If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
    lv_changeable = im_header->is_changeable( ).
      LOOP AT ch_fieldselection ASSIGNING <fs>
        IF lv_changeable IS INITIAL.
          <fs>-fieldstatus = '*'. " Display
        ELSE.
          <fs>-fieldstatus = '+'. " Change
        ENDIF.
    endloop.

  • I created a form and I'm not sure how to make the 'submit' button send me the collected information.

    Hello everybody. I am a web designer (NOT a developer)
    I created a form and I'm not sure how to make the 'submit' button send me the collected information.
    I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
    Now I need to link the 'submit button' so that it will e-mail me the completed form.
    (formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
    (after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
    I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
    -Brenna
    The e-mail I would like the form sent to is:
    [email protected]
    Here is the the code for my form 'as is' :
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>Create a Profile</title>
    <link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
    <script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
    </head>
    <body id="main_body" >
              <img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
              <div id="form_container">
                        <h1><a>Create a Profile</a></h1>
                <form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
                        <div class="form_description">
                                  <h2 align="center">Create a Tommy Lemonade Profile</h2>
                                  <p></p>
                        </div>
                          <ul >
                                              <li id="li_1" >
                        <label class="description" for="element_1">Name </label>
                        <span>
                                  <input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
                                  <label>First</label>
                        </span>
                        <span>
                                  <input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
                                  <label>Last</label>
                        </span>
                        </li>                    <li id="li_23" >
                        <label class="description" for="element_23">Service Provider Type </label>
                        <span>
                                  <input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_1">Barber</label>
    <input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_2">Hairstylist</label>
    <input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_3">Nail Technician</label>
    <input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_4">Massage Therapist</label>
    <input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_5">Skin Care</label>
    <input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_6">Esthetician</label>
    <input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
    <label class="choice" for="element_23_7">Make Up Artist</label>
                        </span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
                        </li>                    <li id="li_19" >
                        <label class="description" for="element_19">Top 5 services </label>
                        <div>
                                  <textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
                        </div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
                        </li>                    <li id="li_20" >
                        <label class="description" for="element_20">List all services you offer & thier starting price </label>
                        <div>
                                  <textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
                        </div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
    </small></p>
                        </li>                    <li id="li_12" >
                        <label class="description" for="element_12">Personal Phone </label>
                        <span>
                                  <input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                                  <label for="element_12_1">(###)</label>
                        </span>
                        <span>
                                  <input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                                  <label for="element_12_2">###</label>
                        </span>
                        <span>
                                   <input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
                                  <label for="element_12_3">####</label>
                        </span>
                        <p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
                        </li>                    <li id="li_21" >
                        <label class="description" for="element_21">E-mail (Required)  </label>
                        <div>
                                  <input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
                        </div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
                        </li>                    <li id="li_6" >
                        <label class="description" for="element_6">Confirm your e-mail (Required)  </label>
                        <div>
                                  <input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
                        </div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
                        </li>                    <li id="li_3" >
                        <label class="description" for="element_3">Web Site </label>
                        <div>
                                  <input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
                        </div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
                        </li>                    <li id="li_4" >
                        <label class="description" for="element_4">Place of employment </label>
                        <div>
                                  <input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
                        </div>
                        </li>                    <li id="li_2" >
                        <label class="description" for="element_2">Work Address </label>
                        <div>
                                  <input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
                                  <label for="element_2_1">Street Address</label>
                        </div>
                        <div>
                                  <input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
                                  <label for="element_2_2">Address Line 2</label>
                        </div>
                        <div class="left">
                                  <input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
                                  <label for="element_2_3">City</label>
                        </div>
                        <div class="right">
                                  <input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
                                  <label for="element_2_4">State / Province / Region</label>
                        </div>
                        <div class="left">
                                  <input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
                                  <label for="element_2_5">Postal / Zip Code</label>
                        </div>
                        <div class="right">
                                  <select class="element select medium" id="element_2_6" name="element_2_6">
                                  <option value="" selected="selected"></option>
    <option value="Afghanistan" >Afghanistan</option>
    <option value="Albania" >Albania</option>
    <option value="Algeria" >Algeria</option>
    <option value="Andorra" >Andorra</option>
    <option value="Antigua and Barbuda" >Antigua and Barbuda</option>
    <option value="Argentina" >Argentina</option>
    <option value="Armenia" >Armenia</option>
    <option value="Australia" >Australia</option>
    <option value="Austria" >Austria</option>
    <option value="Azerbaijan" >Azerbaijan</option>
    <option value="Bahamas" >Bahamas</option>
    <option value="Bahrain" >Bahrain</option>
    <option value="Bangladesh" >Bangladesh</option>
    <option value="Barbados" >Barbados</option>
    <option value="Belarus" >Belarus</option>
    <option value="Belgium" >Belgium</option>
    <option value="Belize" >Belize</option>
    <option value="Benin" >Benin</option>
    <option value="Bhutan" >Bhutan</option>
    <option value="Bolivia" >Bolivia</option>
    <option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
    <option value="Botswana" >Botswana</option>
    <option value="Brazil" >Brazil</option>
    <option value="Brunei" >Brunei</option>
    <option value="Bulgaria" >Bulgaria</option>
    <option value="Burkina Faso" >Burkina Faso</option>
    <option value="Burundi" >Burundi</option>
    <option value="Cambodia" >Cambodia</option>
    <option value="Cameroon" >Cameroon</option>
    <option value="Canada" >Canada</option>
    <option value="Cape Verde" >Cape Verde</option>
    <option value="Central African Republic" >Central African Republic</option>
    <option value="Chad" >Chad</option>
    <option value="Chile" >Chile</option>
    <option value="China" >China</option>
    <option value="Colombia" >Colombia</option>
    <option value="Comoros" >Comoros</option>
    <option value="Congo" >Congo</option>
    <option value="Costa Rica" >Costa Rica</option>
    <option value="Côte d'Ivoire" >Côte d'Ivoire</option>
    <option value="Croatia" >Croatia</option>
    <option value="Cuba" >Cuba</option>
    <option value="Cyprus" >Cyprus</option>
    <option value="Czech Republic" >Czech Republic</option>
    <option value="Denmark" >Denmark</option>
    <option value="Djibouti" >Djibouti</option>
    <option value="Dominica" >Dominica</option>
    <option value="Dominican Republic" >Dominican Republic</option>
    <option value="East Timor" >East Timor</option>
    <option value="Ecuador" >Ecuador</option>
    <option value="Egypt" >Egypt</option>
    <option value="El Salvador" >El Salvador</option>
    <option value="Equatorial Guinea" >Equatorial Guinea</option>
    <option value="Eritrea" >Eritrea</option>
    <option value="Estonia" >Estonia</option>
    <option value="Ethiopia" >Ethiopia</option>
    <option value="Fiji" >Fiji</option>
    <option value="Finland" >Finland</option>
    <option value="France" >France</option>
    <option value="Gabon" >Gabon</option>
    <option value="Gambia" >Gambia</option>
    <option value="Georgia" >Georgia</option>
    <option value="Germany" >Germany</option>
    <option value="Ghana" >Ghana</option>
    <option value="Greece" >Greece</option>
    <option value="Grenada" >Grenada</option>
    <option value="Guatemala" >Guatemala</option>
    <option value="Guinea" >Guinea</option>
    <option value="Guinea-Bissau" >Guinea-Bissau</option>
    <option value="Guyana" >Guyana</option>
    <option value="Haiti" >Haiti</option>
    <option value="Honduras" >Honduras</option>
    <option value="Hong Kong" >Hong Kong</option>
    <option value="Hungary" >Hungary</option>
    <option value="Iceland" >Iceland</option>
    <option value="India" >India</option>
    <option value="Indonesia" >Indonesia</option>
    <option value="Iran" >Iran</option>
    <option value="Iraq" >Iraq</option>
    <option value="Ireland" >Ireland</option>
    <option value="Israel" >Israel</option>
    <option value="Italy" >Italy</option>
    <option value="Jamaica" >Jamaica</option>
    <option value="Japan" >Japan</option>
    <option value="Jordan" >Jordan</option>
    <option value="Kazakhstan" >Kazakhstan</option>
    <option value="Kenya" >Kenya</option>
    <option value="Kiribati" >Kiribati</option>
    <option value="North Korea" >North Korea</option>
    <option value="South Korea" >South Korea</option>
    <option value="Kuwait" >Kuwait</option>
    <option value="Kyrgyzstan" >Kyrgyzstan</option>
    <option value="Laos" >Laos</option>
    <option value="Latvia" >Latvia</option>
    <option value="Lebanon" >Lebanon</option>
    <option value="Lesotho" >Lesotho</option>
    <option value="Liberia" >Liberia</option>
    <option value="Libya" >Libya</option>
    <option value="Liechtenstein" >Liechtenstein</option>
    <option value="Lithuania" >Lithuania</option>
    <option value="Luxembourg" >Luxembourg</option>
    <option value="Macedonia" >Macedonia</option>
    <option value="Madagascar" >Madagascar</option>
    <option value="Malawi" >Malawi</option>
    <option value="Malaysia" >Malaysia</option>
    <option value="Maldives" >Maldives</option>
    <option value="Mali" >Mali</option>
    <option value="Malta" >Malta</option>
    <option value="Marshall Islands" >Marshall Islands</option>
    <option value="Mauritania" >Mauritania</option>
    <option value="Mauritius" >Mauritius</option>
    <option value="Mexico" >Mexico</option>
    <option value="Micronesia" >Micronesia</option>
    <option value="Moldova" >Moldova</option>
    <option value="Monaco" >Monaco</option>
    <option value="Mongolia" >Mongolia</option>
    <option value="Montenegro" >Montenegro</option>
    <option value="Morocco" >Morocco</option>
    <option value="Mozambique" >Mozambique</option>
    <option value="Myanmar" >Myanmar</option>
    <option value="Namibia" >Namibia</option>
    <option value="Nauru" >Nauru</option>
    <option value="Nepal" >Nepal</option>
    <option value="Netherlands" >Netherlands</option>
    <option value="New Zealand" >New Zealand</option>
    <option value="Nicaragua" >Nicaragua</option>
    <option value="Niger" >Niger</option>
    <option value="Nigeria" >Nigeria</option>
    <option value="Norway" >Norway</option>
    <option value="Oman" >Oman</option>
    <option value="Pakistan" >Pakistan</option>
    <option value="Palau" >Palau</option>
    <option value="Panama" >Panama</option>
    <option value="Papua New Guinea" >Papua New Guinea</option>
    <option value="Paraguay" >Paraguay</option>
    <option value="Peru" >Peru</option>
    <option value="Philippines" >Philippines</option>
    <option value="Poland" >Poland</option>
    <option value="Portugal" >Portugal</option>
    <option value="Puerto Rico" >Puerto Rico</option>
    <option value="Qatar" >Qatar</option>
    <option value="Romania" >Romania</option>
    <option value="Russia" >Russia</option>
    <option value="Rwanda" >Rwanda</option>
    <option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
    <option value="Saint Lucia" >Saint Lucia</option>
    <option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
    <option value="Samoa" >Samoa</option>
    <option value="San Marino" >San Marino</option>
    <option value="Sao Tome and Principe" >Sao Tome and Principe</option>
    <option value="Saudi Arabia" >Saudi Arabia</option>
    <option value="Senegal" >Senegal</option>
    <option value="Serbia and Montenegro" >Serbia and Montenegro</option>
    <option value="Seychelles" >Seychelles</option>
    <option value="Sierra Leone" >Sierra Leone</option>
    <option value="Singapore" >Singapore</option>
    <option value="Slovakia" >Slovakia</option>
    <option value="Slovenia" >Slovenia</option>
    <option value="Solomon Islands" >Solomon Islands</option>
    <option value="Somalia" >Somalia</option>
    <option value="South Africa" >South Africa</option>
    <option value="Spain" >Spain</option>
    <option value="Sri Lanka" >Sri Lanka</option>
    <option value="Sudan" >Sudan</option>
    <option value="Suriname" >Suriname</option>
    <option value="Swaziland" >Swaziland</option>
    <option value="Sweden" >Sweden</option>
    <option value="Switzerland" >Switzerland</option>
    <option value="Syria" >Syria</option>
    <option value="Taiwan" >Taiwan</option>
    <option value="Tajikistan" >Tajikistan</option>
    <option value="Tanzania" >Tanzania</option>
    <option value="Thailand" >Thailand</option>
    <option value="Togo" >Togo</option>
    <option value="Tonga" >Tonga</option>
    <option value="Trinidad and Tobago" >Trinidad and Tobago</option>
    <option value="Tunisia" >Tunisia</option>
    <option value="Turkey" >Turkey</option>
    <option value="Turkmenistan" >Turkmenistan</option>
    <option value="Tuvalu" >Tuvalu</option>
    <option value="Uganda" >Uganda</option>
    <option value="Ukraine" >Ukraine</option>
    <option value="United Arab Emirates" >United Arab Emirates</option>
    <option value="United Kingdom" >United Kingdom</option>
    <option value="United States" >United States</option>
    <option value="Uruguay" >Uruguay</option>
    <option value="Uzbekistan" >Uzbekistan</option>
    <option value="Vanuatu" >Vanuatu</option>
    <option value="Vatican City" >Vatican City</option>
    <option value="Venezuela" >Venezuela</option>
    <option value="Vietnam" >Vietnam</option>
    <option value="Yemen" >Yemen</option>
    <option value="Zambia" >Zambia</option>
    <option value="Zimbabwe" >Zimbabwe</option>
                                  </select>
                        <label for="element_2_6">Country</label>
              </div>
                        </li>                    <li id="li_5" >
                        <label class="description" for="element_5">Work Phone </label>
                        <span>
                                  <input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                                  <label for="element_5_1">(###)</label>
                        </span>
                        <span>
                                  <input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                                  <label for="element_5_2">###</label>
                        </span>
                        <span>
                                   <input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
                                  <label for="element_5_3">####</label>
                        </span>
                        <p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
                        </li>                    <li id="li_22" >
                        <label class="description" for="element_22">Schedule </label>
                        <div>
                                  <textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
                        </div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
                        </li>                    <li id="li_7" >
                        <label class="description" for="element_7">Profile Picture </label>
                        <div>
                                  <input id="element_7" name="element_7" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_8" >
                        <label class="description" for="element_8">Portfolio image  </label>
                        <div>
                                  <input id="element_8" name="element_8" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_9" >
                        <label class="description" for="element_9">Portfolio image  </label>
                        <div>
                                  <input id="element_9" name="element_9" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_10" >
                        <label class="description" for="element_10">Portfolio image  </label>
                        <div>
                                  <input id="element_10" name="element_10" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_11" >
                        <label class="description" for="element_11">Portfolio image  </label>
                        <div>
                                  <input id="element_11" name="element_11" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_13" >
                        <label class="description" for="element_13">Portfolio image  </label>
                        <div>
                                  <input id="element_13" name="element_13" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_14" >
                        <label class="description" for="element_14">Portfolio image  </label>
                        <div>
                                  <input id="element_14" name="element_14" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_15" >
                        <label class="description" for="element_15">Portfolio image  </label>
                        <div>
                                  <input id="element_15" name="element_15" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_16" >
                        <label class="description" for="element_16">Portfolio image  </label>
                        <div>
                                  <input id="element_16" name="element_16" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_17" >
                        <label class="description" for="element_17">Portfolio image  </label>
                        <div>
                                  <input id="element_17" name="element_17" class="element file" type="file"/>
                        </div> 
                        </li>                    <li id="li_18" >
                        <label class="description" for="element_18">Portfolio image  </label>
                        <div>
                                  <input id="element_18" name="element_18" class="element file" type="file"/>
                        </div> 
                        </li>
                            <li class="buttons">
                              <input type="hidden" name="form_id" value="836144" />
                        <input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
                            </li>
                          </ul>
                        </form>
                        <div id="footer">
                        </div>
              </div>
              <img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
              </body>
    </html>

    I'm afraid not.    It's not rocket science but you need to do some coding. 
    You'll need to find a script (php) and save it to your local site folder.  Then reference the script in your form's action attribute like so.
         <form action="path/form-to-email-script.php" >
    The input fields in your HTML form need to exactly match the script variables. 
    I'm  assuming you're hosted on a Linux server which uses PHP code.  Linux servers are also case sensitive, so upper case names are not the same as lower case names.  It's usually best to use all lower case names in your form and script to avoid confusion.
    Related Links:
    Formm@ailer PHP from DB Masters
    http://dbmasters.net/index.php?id=4
    Tectite
    http://www.tectite.com/formmailpage.php
    If this is all a bit beyond your skill set, look at:
    Wufoo.com (on-line form service)
    http://wufoo.com/
    Nancy O.

  • How to make a magnifying glass link to a look up table ?

    Dear Friends,
    Hello. I am developing the accounting application of journal entry. In journal line, I use the image "magnifying glass" next to each chart field. When we click on the magnifying glass, it's supposed to come up a look up table( a chart and name mapping table), and we select the proper chart to input into the chart field.
    I understand to create another record and page for the look up table. But I don't understand how to make a magnifying glass link to a look up table. Can anybody tell me how to do that ? Thanks.
    Lucy

    This is how it works,
    Table A (which stores chart fields). You have used fields from table A on a page so that users can input data.
    You don't need to put a magnifying glass image or create a new page to achieve look up page.
    all you need to do is create another table say Table B which should have the chart field and corresponding description you want to show on lookup page. Then open record-field property of the chart field on Table A and mention Table B as prompt table.

  • In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

    I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
    The addons '''REMAINED''' including:
    * addons I already used in Fx 3.6 (like webmail notifie , xmarks)
    * ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
    The addons '''DISAPPEARED''' including:
    * addons I already used in Fx 3.6 (like yoono)
    * '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
    But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
    Some more details:
    * This happened when i use RC for already a few days and keep on even i restart Fx and windows.
    * The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
    * This addons are really '''disappeared''' but not disable only!
    * This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
    * I try to install back one of the addons - Stylish, the installed code are still here.
    * It is nearly an impossible mission to install every missing addons again, as it really kill my time.

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

  • How to make site root-relative links work in DW and Server both?

    See details on buggy DW image link behavior, below. My question is:
    1) how to make site root-relative links work in DW and Server both? Or…
    2) how to reliably automate the change of several hundred legacy root-relative links of the form
    /images/image.jpg  to document-relative?
    That is, to
    ../images/image.jpg or
    ../../images/image.jpg or
    ../../../images/image.jpg etc…depending on where the directory is.
    The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
    I tried changing the files to how DW creates root relative links now:
    /public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
    I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
    The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link?  I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
    It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
    Summary of buggy behavior: (see test with images here)
    "old style" site root link
          /images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a (existing format)
    "new style" site root relative link
          /public_html/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: broken
          Ease of switching: easy
    Document relative link
          ../../images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: good
          Ease of switching: hard (how to automate?)
    Absolute link
          http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a...not a real option
    Thanks!
    Similar discussion on "/"

    Hello again Jon!
    Thanks for jumping on this.
    All clear and understood about where publc_html is etc.
    No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
    "/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
    Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
    The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url,  which is automatically set to http://www.oasisdesign.net/public_html/
    it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
    Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
    Art
    PS--don't  have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
    Is there an easy, automated way to change links sitewide from document to root relative?

  • How to make the Page UP and down work on a table control screen?

    Dear all,
    Can some one suggest how to make the table control screen work with Page Up and Page down controls.
    when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
    Regard,
    Vj

    Take this code as a referance:
    Sample code for vertical scrolling in PAI processing will look like this:
    MODULE user_command_XXXX INPUT. (XXXX is screen no.)
      CASE ok_code.
        WHEN 'P--'.
          CLEAR ok_code.
          PERFORM paging USING 'P--'.
        WHEN 'P-'.
          CLEAR ok_code.
          PERFORM paging USING 'P-'.
        WHEN 'P+'.
          CLEAR ok_code.
          PERFORM paging USING 'P+'.
        WHEN 'P++'.
          CLEAR ok_code.
          PERFORM paging USING 'P++'.
    *&      Form  PAGING
    *       Form to do scrolling for screen XXXX
    *      -->CODE   OKCODE value (P--, P-, P+, P++ )
    FORM paging USING code.
      DATA: i TYPE i,
            j TYPE i.
      CASE code.
        WHEN 'P--'. <table control name>-top_line = 1.
        WHEN 'P-'.
          <table control name>-top_line =
                  <table control name>-top_line - line_count.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
        WHEN 'P+'.
          i = <table control name>-top_line + line_count.
          j = <table control name>-lines - line_count + 1.
          IF j LE 0. j = 1. ENDIF.
          IF i LE j.
            <table control name>-top_line = i.
          ELSE.
            <table control name>-top_line = j.
          ENDIF.
        WHEN 'P++'.
          <table control name>-top_line =
                 <table control name>-lines - line_count + 1.
          IF <table control name>-top_line LE 0.
            <table control name>-top_line = 1.
          ENDIF.
      ENDCASE.
    ENDFORM.                               " PAGING
    Regards,
    Ravi

  • How to make the diagonal line in the swing table cell?

    Hi all,
    How to make the diagonal line in the swing table cell just like the link below?
    http://61.132.17.188/webber/table.gif

    One improvement.. To get a line that is neat, use a bit of Graphics2D
        public void paintComponent(java.awt.Graphics g)
            int w = getSize().width;
            int h = getSize().height;
            // draw a line between (0,0) and (w,h)  
            g.setColor(getForeground());
            if (strTop == null)
                strTop = "  ";
            if (strBottom == null)
                strBottom = "  ";
                java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
              g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
              //g2.setStroke(new java.awt.BasicStroke(14.0f));
            g.drawLine(0, 0, w, h);
            //the following lines will draw the two strings,
            //one above the top of the line and the above below it.     
            g2.drawString(strTop, (w/2)+2, (h/2)-2);
            g2.drawString(strBottom, 2, (h / 2) + 2);
            //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
        }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
    Cheers

  • How to make the buttons INVISIBLE in the Application toolbar

    Hi All,
    I have a requirement to create a button in the Application toolbar of the Module Pool Screen. The field should be made Invisible by default. and it should be displayed based on one condition.
    Could you please let me know how to make that particular button INVISIBLE. I think we can make it invisible by using EXCLUDING statement. But, How to make the button VISIBLE again when the check is satisfied.
    I found from the portal that the FM 'VIEW_SET_PF_STATUS' can be used to make a button INVISIBLE. Could anyone help me out how to pass the parameters to this Function module?
    or is there any Function Module available to make the button VISIBLE and INVISIBLE? Please help me on this issues.
    Is there any possibility to make the button VISIBLE or INVISIBLE as we do for the screen fields using LOOP AT SCREEN..?
    Thank you in advance.
    Regards.
    Paddu.

    Hi,
    Try to use below in the PBO module status_0100 OUTPUT.
    DATA t_fcode TYPE TABLE OF sy-ucomm.
    refresh t_fcode[].
    APPEND 'Function code name of the button' TO t_fcode. 
    Check the condition here for which you want to make field visible.
        DELETE FCODE of the button from T_FCODE table
      ENDIF.
      SET PF-STATUS 'STATUS_0100' EXCLUDING t_fcode.

Maybe you are looking for

  • Critical Error when trying to refresh a workbook

    Hello all, We recently upgraded to OFFICE 2007 and have the latest SAP GUI aswell. A lot of the users are having no issues at all. But some are getting an error "A Critical Program error has Occurred. The program will now terminate" when they try to

  • Ipod nano replacement program 2014

    are apple still replacing with 6th Gen as just about to send my 1st back

  • Implicit character or charactered structure -- to String  Conversion

    Hi everybody, that sounds trivial but i am struggeling.... which is the most elegant way to do a implicit "To-String" Conversion in ABAP Objects... I have e.g.     data lok_string type string.     lok_string = wa.     m_object->addline( lok_string ).

  • Once again: j2ee server doesn't start :(

    after installation it worked just perfect. yesterday something happened, no idea what, and now it doesn't want to start anymore. it says: "Unable to create ORB. Possible causes include TCP/IP ports in use by another process". Well i tried to change i

  • How to set the short cut key for buttons

    Hi I dont know how to set the short cut keys for the button...can u pls help me out