How to make the CTI respond to the work area again?

Hello,
i suddenly have a unusual problem (4 me). I work on a project and i noticed today that the CTI dose not act according to my work area when i RAM preview. After pressing 0 it just goes after the end of the work area continuing to render
. (green line)
And also it does not start to render at the beginning of the work area. It uses somehow the comp's lenght...
Please advise.
Thanks!
I attached a photo so you can see what is it about.

If you leave "From current time" enabled, you can use 0 to audio preview from the current position or shift-0 to audio preview from the beginning of the comp.

Similar Messages

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to make a photo STAY in the assets panel for future use for In browser editing?

How to make a photo STAY in the assets panel for future use for In browser editing?
When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

Sure ... right mouse click on your page and choose 'Exclude Page from Menus' :-)

MOVED: how to make a good flow in the case?

This topic has been moved to Off Topic Technical.
how to make a good flow in the case?

Browser variation is something we must all deal with. For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid). Then get a CSS Layout that meets your requirements.
PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
http://www.projectseven.com/products/index.htm
CSS Layout Magic (commercial extension for Dreamweaver)
http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make a hard copy of the OS mountain lion that i downloaded

How to make a hard copy of the file ofthe OS mountain lion downloaded from apple

Follow the directions in this link to make a Mt. Lion USB thumb drive:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Ciao.

How to make every break column on the top of the rows in the same subgroup

hi, guys:
I was wondering if anyone could help me on this problem: I need to set up a break column on a classic report (I ma required to use classic report only), and it works, but I do not know how to make every break column on the top of the rows in the same subgroup. The break column only stays on the left to the rest columns as it is the first column. Anyone could help me on this problem? Here is the query:
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)
or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
where rox.offender_id=so.offender_id
and sa.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
where rox.offender_id=so.offender_id
and sa.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))I set up "Jurisdiction" to be displayed as the first column in report attributes and set up the first column to be break column, under the "When displaying a break column use this format, use #COLUMN_VALUE# subs", I fill in "Jurisdiction".

lxiscas wrote:
Hi, fac586:
I am sorry for not being able to provide project online oracle to ask the question as some of the data needs to be approved to release.You don't need to use the actual data. Create simple test cases using data from Oracle's sample schemas: SCOTT, OE, HR etc.
I actually want something like this:
Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/
Smith , Carl Sherman      ......
Smith , Tommy Nesby .....
Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430
Smith , Gabriel Ray      ...
Smith , Michael Bert   ...I omit the sensitive data with ...
but right now it shows as this way:
Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/ Smith , Carl Sherman      ......
Smith , Tommy Nesby .....
Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430   Smith , Gabriel Ray      ...
Smith , Michael Bert   ...Is that possible to show the data as the upper way?The best way to do this is using a report with a custom named column template as in this example. See the following threads for solutions to similar problems:
<li>{thread:id=2402836}
<li>{message:id=9816577}

How to make scheduled jobs Fail if the return partial results?

How to make scheduled jobs Fail if the return partial results?
Does anyone know if there is a way to do this?
We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
Any ideas/suggestion would be appreciated...
I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
Ta
Nick

This may be helpful to some people:
http://blogs.sun.com/milan/entry/using_web_service_to_send

JavaFX 2.0 : How to make a stage fit into browser view area?

Invoking a JavaFX 2.0 applet from browser results in white spaces on the right and bottom area of the browser. This happens when the JavaFX stage resolutions is lesser than that of browsing desktop resolution. In a client/server model, usually server components doesn't know about the client resolutions. So how to make a stage fit into browser view area?
Also I think, setting the primary stage to full screen mode is not what I want to achieve, as this mode overlays the browser window.

Try typing 100% into the width and height fields. Alternatively, you could use Javascript (no connection to Java in spite of the name) to create an event to resize the applet to the window's size.

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help.

How to make my Execute Immediate statement to work??

Hi, Sir:
I use SQL Oracle 9i,
I have following procedure called by a trigger:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp;';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
My trigger is:
CREATE OR REPLACE TRIGGER emps_biu_after
after INSERT OR UPDATE or delete on emp
for each row
begin
if TO_CHAR(SYSDate,'DY')= 'SUN'
then
DBMS_OUTPUT.PUT_LINE('Today is holiday, ename =' );
else
DBMS_OUTPUT.PUT_LINE('Today is working Day, ename =');
emps_check();
end if;
end;
When I use following to update emp table:
SQL> UPDATE emp T1
2 SET T1.sal = 200.0
3 WHERE T1.ename like '%SCOTT%';
I got:
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
Looks like EXECUTE IMMEDIATE s_sql; did not work.
What is wrong??
How to make my Execute Immediate statement to work??
Thanks

You may omit the ';' character...
s_sql:='INSERT INTO
Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO)
select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO
from emp';
... and something else
IN PL/SQL when a procedure , function doews not take
any parameter(s) then its call can be made as simply
its name without a pair of parenthesis....(It seems
that you are influenced by Java...:) )
SimThanks Sir:
I remove this ; but still error:
1 UPDATE emp T1
2 SET T1.sal = 768.1
3* wHERE T1.ename like '%SCOTT%'
SQL> /
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
My code as follows:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
what is other wrong??
Yes, I am java guys,
Thanks

How to make my pixma ip 90 to work wireless with windows 7/64

how to make my pixma ip 90 to work wireless with windows 7/64 i installed the bu-10 it is authorized but can't make it to print wireless.

Hi again manny2249,
If the Bluetooth Settings feature does not appear on the Canon iP90 Setup Utility screen, the Bluetooth unit may not be installed correctly. We recommend contacting us via one of the support methods listed at the Contact Us link below for assistance with setting up the printer via Bluetooth.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What is the difference between Structure and Work area

Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.

hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
             matnr type mara-matnr,
            ernam type mara-ernam,
            end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM

How to make an OSB proxy to the server responding with application/json?

Hi,
My question is related to unfortunately unanswered question: Re: OSB and Oracle Maps
Big picture: There is a Jetty server on local network with SpringMVC controllers which respond with JSON. The only way to communicate from frontend application to that server is through the OSB. So OSB should work as transparent proxy, passing headers and respond with original JSON message.
I tried to build such proxy, following some blogs entries. Proxy worked for the REST services based on XML, but when I go to the JSON business service I get stuck.
I think that business service to communicate with JSON server should be a Messaging Service, with Response Type: Text and Request Type: None.
All headers should be passed (Outbound request) so the JSON server receives them in same state as frontend send.
Business service should be invoked from 'Service Callout' because I don't need any asynchronous calls, or routing - just call the business service endpoint, which will call JSON server and pass the response.
There are some problems in which I stepped into when tried this approach:
1. When using Request Type: None the Service Callout give me an error of type:
A callout cannot invoke a one-way operation
When switching Request Type to Text I get it working, but some services on JSON server which operates only on GET method stop work (because switching to Text automatically require to use POST method, which is obvious but not necessary in my case).
2. Even with above modification I cannot get the response from business service - I guess it's because the JSON response isn't wrapped into any XML elements. So in Service Callout any logger prints the message on Request side, but anything is written by Response logger inside the Service Callout. The browser which launch the Proxy Service also answers with:
HTTP 500 (Internal Server Error)
and I don't see any errors in logs, last message is from Request logger inside Service Callout.
3. Business Service itself seems to work - here is an output from 'Run on Server':
Business Service Testing - SampleJSON
Request Document
Response Document
{"models":[],"success":1}
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Length>696</http:Content-Length>
<http:Content-Type>application/json;charset=ISO-8859-1</http:Content-Type>
<http:Server>Jetty(7.4.2.v20110526)</http:Server>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">ISO-8859-1</tran:encoding>
<http:http-response-code xmlns:http="http://www.bea.com/wli/sb/transports/http">200</http:http-response-code>
</con:metadata>
But when calling it from a service proxy I don't get any logger message on the JSON server, which appears normally when I runs business service tests. So it seems that the request doesn't even reach it.
If anyone has a time to look at this problem I can share the configuration jar ready to import: http://dl.dropbox.com/u/21341604/sample-osb-json/sample-json.jar, to make it working you need change Endpoint URI in SampleJSON.biz.
Thanks in advance for any kind of help or tips,
Adrian

If you are the admin, then use the following command in Terminal:
sudo mkdir /.nameOfFolder
Replace nameOfFolder with the name you want. The sudo will prompt you for your admin password.

Publishing .index Vs .swf How to make my file look like the .swf Question

Hi, I currenly have a site published where the domain is reading
www.mysite.com/index.html (example)
When I view this site the image is not centered and when I expand it in different browers it does not look good.
When I view the site by looking at it through the exact location of where I have the flash, for example www.mysite.com/index.swf It's exactly how I want it to look.
Is there a code I can put into the html where I can have the same look as the .swf but view it with the .index.html
For example when I am testing the .swf extension and change the size of the browers or expand it, the flash movie is always centered and looks great in every brower.
I was thinking of changing the domains link to the .swf file to solve the issue, but is by having the .html extension provide greater serach information. What is it nessary?

You seem to be confusing the .swf file with the Web page that the .swf file goes on. For Internet delivery you want the index.html web page.
You can "Publish" the page directly from Flash. Under the "File" menu, look for Publish Settings and review ALL the options before "Publishing" the swf.
If you don't understand them, Google for that specific option.
Also review "Flash scaling"
Here are examples of different scaling parameters available in the Publish settings. You can also add these parameters directly in the html (<param name="scale" value="noscale"). All the examples replace the actual Flash dimensions with 100% for both width and height (width="100%" height="100%"). These examples use the old <object> and <embed> to illustrate the different ways to scale Flash. Once you understand how it works I’d recommend that you use swfobject to place the Flash in your final project.
View the source code for each page to see the full code.
http://www.cidigitalmedia.com/tutorials/scale/exact_fit.html
"exactFit" scales the file to fit exactly within the confines of the screen, irregardless if the movie becomes consequently distorted. The original aspect ratio is not maintained. So round things are not round and squares are not square.
http://www.cidigitalmedia.com/tutorials/scale/noScale.html
"noScale" is the default setting, and causes the movie to be displayed at the originally designed dimensions.
http://www.cidigitalmedia.com/tutorials/scale/no_border.html
"noBorder" causes the movie to be scaled to what ever dimensions are needed to have no border surrounding the movie within the player, which consequently could result in some of the movie being cut off from view. In other words, the movie will maintain the original aspect ratio and will fill the screen completely. But if the movie has to be streched wider to fill both sides of the screen, it will also stretch taller, but then some of the top and the bottom of the movie may be cut off from view.
http://www.cidigitalmedia.com/tutorials/scale/show_all.html
"showAll" scales the movie to the size of the screen (which could cause pixelation if the file contains raster information), the difference between showAll and exactFit is that showAll mantains initial movie size proportions. Because it maintains the original aspect ratio, there can be space to the sides or the top and bottom. But everything always shows and they are not distorted. But notice the photo in the center, it becomes pixilated at larger screen resolutions.
The trickiest part of trying to go full screen is that it’s difficult to make the Flash wider without making it taller also, that is, to maintain the correct proportions or aspect ratio of everything on the stage. These methods are just simple scaling accomplished with html. There are also methods to dynamically scale the stage and it’s elements using Actionscript… but that’s a much more complex undertaking.
Best wishes,
Eye for Video
www.cidigitalmedia.com
Adninjastrator

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to make the CTI respond to the work area again?

Similar Messages

Maybe you are looking for